Timer.exe the error closes prog. down

Similar Questions

• upgrade to windows 10, cannot open itunes, it opened the first time, and imported all my songs, but does not open a second time, get the error that the path is not correct and file not found

  upgrade to windows 10, cannot open itunes, it opened the first time, and imported all my songs, but does not open a second time, get the error that the path is not correct and file not found

  Try to repair the security permissions for iTunes for Windows and the empty/corrupted after upgrade/crash iTunes library.

  TT2

• I get a message says "the site is unavailable at this time" with the error code [0 x 80070424].

  Original title: error code [0 x 80070424]

  My security alerts continues to tell me that the automatic updates are disabled. I check in the Security Center, and they are in position "on", but it won't download updates. When I go to the Microsoft website to update directly, I get a message says "the site is unavailable at this time" with the error code [0 x 80070424]. Microsoft doesn't even have it classified as a potential error code. I checked the status of the Fund Manager and it is set to "Auto" and it is started, but does not resolve the issue.

  Hello

  You did changes to the computer before this problem?

  Try the troubleshooting provided in the article below steps and check if it helps.

  Error message when you use Microsoft Update or Windows Update Web sites to install updates: 0 x 80070424
  http://support.Microsoft.com/kb/968002

• installation of updates fail most of the time with the error code 646

  What is the error 646 in the installation of updates?

  Hi Sal Dahbi,

  I will need more information to help you better.

  · Did recent changes to the computer?

  · Is this the first time you arrive on this issue?

  · Did you use any third party registry patches or updates recently?

  One of the following methods may solve your problem.

  Method 1: Components reset Windows Update will fix this corrupted update components.

  You can do so by visiting the http://support.microsoft.com/kb/971058 site and click repair button available in this Web site.

  If the fix button did not work, then follow the troubleshooting steps provided in this website to reset the Windows Update components.

  Method 2: Download and install Windows Update agent

  For more information about how to download and install the latest Windows Update agent, click the following link to view the article in the Microsoft Knowledge Base:

  http://support.Microsoft.com/kb/949104 

  Hope this information is useful.

  Let me know if it worked.

  Thank you, and in what concerns:

  Umesh P - Microsoft Support

  Visit our http://social.answers.microsoft.com/Forums/en-US/answersfeedback/threads/ Microsoft answers feedback Forum and let us know what you think.

• USB 3.0 Port at random times out the error "semaphore timeout period has expired.

  My USB 3.0 port randomly shuts down completely. I sometimes get a message that says "the semaphore timeout period has expired." I disabled USB selective suspend and verified that the port is functional (Device Manager) and even used my drive hard/USB stick/mouse wireless mouse in the regular USB 2.0 ports. 2.0 ports both products I work very well. Moreover, the stop device, is not related to the volume or type of media, that I'm going through. Yes, any driver alone on my computer is 100% up-to-date (from validation). How can I change this? I feel that I lost all the money on my new USB 3.0 hard drive.

  Windows 7, 64-bit.

  I also had the same problem and host controller Renesas usb3.

  I went to the site intel and downloaded this driver

  https://Downloadcenter.Intel.com/Detail_Desc.aspx?DwnldID=19880&lang=eng

  My driver usb3 was updated according to Microsoft and Lenovo.

  Former pilot was 2.0.32.0 according to Lenovo.

  My external drive USB3 now works correctly and not cut or hang PCs.

  No help on Microsoft or Lenovo websites regarding this issue, but it is a HUGE problem.

• When you install an automatic update. I received the error code 652. try three times. Always code error 652. She strives to update of Miscrosoft Silverlight (KB2164913) need help.

  When you install an automatic update. I received the error code 652. Have tried three times, always the error code 652. She tries to Miscrosoft Silverlight Update. need help

  Hello

  ·        Remember to make changes to the system?

  Follow the steps mentioned below.

  Step 1:

  There may be some third-party software that runs in the background, I suggest you do a clean boot and check. To perform a clean boot follow the steps mentioned in the link given below.

  How to troubleshoot a problem by performing a clean boot in Windows Vista or in Windows 7

  http://support.Microsoft.com/kb/929135

  Note: Once you have finished installing, follow step 7 to start the computer in normal startup.

  Step 2:

  Reset windows update components and check. Follow the steps mentioned in the article below.

  How to reset the Windows Update components?

  http://support.Microsoft.com/kb/971058/en-us

  Step 3:

  See the article mentioned below.

  Description of the update for Silverlight: September 1, 2010

  http://support.Microsoft.com/kb/2164913

  To get help after your query in the Microsoft Silverlight Forums. Click on the link below.

  http://forums.Silverlight.NET/forums/

  Thanks and regards.

  Thahaseena M
  Microsoft Answers Support Engineer.
  Visit our Microsoft answers feedback Forum and let us know what you think.

• You try to run Cyberlink downloader to install updates Power DVD but the error message: visual c ++ error library time time to run

  Two days ago, I try to run cyberlink downloader to install the latest update for power dvd (compatible with win 8) .but every time appear the error message: visual c ++ run time time library sleeves application error - the requested to terminate it in an unusual way.what can do? I have the problem with the update.the only specific support has me unistal all visual c ++ redistributable, reinstall program.but had tried the remain.i problem and the security mode.any solution please?  I have win 7 x 64

  Hello

  You can get this error because of things:

  1. The Visual C++ library runtime components are missing. (You should of reinstalled after remove them because this software requires their)
  2. A problem with this software, it is possible a conflict with another software.

  If the problem is caused by #1, you can reinstall the latest version of the Visual C++ Library Runtime components and see if it solves the problem, but I do not know what version of the redistributable software requires.

  Package redistributable Microsoft Visual C++ 2010 (x 64)

  http://www.Microsoft.com/en-US/Download/details.aspx?ID=14632

  There is also a 2012 version of the Redistributable:

  http://www.Microsoft.com/en-US/Download/details.aspx?ID=30679

• The system has encountered an error during the interview of the application. If the error persists, contact the system administrator

  Hi all

  We cloned an Oracle EBS R12.2.2 instance and it worked very well for us. To increase the RAM of the newly created virtual computer, we did the virtual machine down. Once the RAM has increased, we started all the services (without error), including level of DB and Application layer. But when we try to access the application of EBS get the following error:

  -----------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------

  The system has encountered an error during the interview of the application. If the error persists, contact the system administrator.

  -----------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------

  
  

  Then I checked all the services, they are running.

  
  

  Log file: / u01/applmgr/SCREWS/fs_ne/inst/VIS_ebsr72/logs/appl/conc/log

  --------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------

  Process of shell VIS_0402@VIS Manager internal simultaneous departure - ID 6095

  logfile=/U01/applmgr/vis/fs_ne/inst/VIS_ebsr72/logs/appl/conc/log/VIS_0402.Mgr

  PRINTER = noprint

  mailto = applmgr

  Restart = N

  diag = N

  sleep = 30

  PMON = 4

  quesiz = 1

  Reviver is ENABLED

  CP-SYSTEM ADMIN RESP. internal MISSINGThe competitor Manager encountered an error.

  Check the simultaneous log manager for more information. : APRIL 2, 2014 14:21:59 -

  Shut down the internal concurrent Manager: April 2, 2014 14:21:59

  List of errors encountered:

  .............................................................................

  _ 1 _

  Systematic AFPCSQ can't nec USER_ID value of the profile option. ORACLE

  error 1403 in get_responsibility_data

  Cause: get_responsibility_data

  has failed because of the ORA-01403: no data found.

  The SQL statement being executed at the time of the error was: and

  a exe

  .............................................................................

  APP-FND-01388: cannot read the value for option profile SQL_TRACE in routine and ROUTINE.

  List of errors encountered:

  .............................................................................

  _ 1 _

  Routine AFPCAL has received the code of failure while running or analysis of your

  simultaneous program CPMGR

  Examine your log file of concurrent application for more information.

  Make sure that you pass arguments in the correct format.

  .............................................................................

  The internal concurrent Manager VIS_0402@VIS ended with the State 1 - abandon.

  --------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------

  Note: Before you restart the virtual machine it worked great. It has not changed anything except the RAM to the virtual machine. After the start, we get error.

  I need your help. Please suggest me.

  Thank you

  Prabhakar

  Hi all

  Thank you for your support. I solved the problem. Find the info below.

  ===================================================================================================

  Question: Like I said existing VM is cloned VM. Then after we had changed the host name. I checked the database alert log file:

  Before the reboot: name of the node was the previous still node name VM that it functioned very well. (for ex: xyz.domain)

  After the reboot: name of the node is replaced by the new host name. (for ex: abc.domain)

  Once the name of the node is changed he started creating problem in starting the application services.

  One last thing, I want to mention here after hostname change, approval of new contextfile has 700, but it should be 755.

  Solution: I followed these steps.

  (1) stop all services on the LAYERS of the DB and APP

  (2) change the new contextfile permission if not 755 and the .env at the level of the source DB

  (3) cd $ORACLE_HOME/appsutil/bin and run as: perl adgentns.pl appspass = apps contextfile = $CONTEXT_FILE - removeserver

  (4) change the name from old host to the new host name, so find in contextfile.

  (5) start listener, then the database

  (6) listener status, it must must give service to the db instance

  (7) perform autoconfig with new contextfile (DB Tier)

  (8) perform autoconfig (pane APP)

  (9) start all services

  ======================================================================================================

  It works for me, and now the application is running. I hope that it will also work for others.

  Thank you

  Prabhakar

• Windows keeps stops with the error message NOT driver IRQL less THAN or EQUAL

  Using Windows XP on the desktop. Have spent days trying to solve. Getting the message "new hardware installed" but I did not. Had recent power outages in the region. Also have Norton Security Suite, which recently has been giving me the popups that my RAM is too low, but I seem to have more than enough. Have done a few sessions with chat support online Norton with "recovery" distance as well, but the problem persists. Seems worse at night. I'd appreciate a few tips, like this is to destroy my PC.

  What is your computer brand and model?

  What is the processor and RAM how much your computer have? Make a right-click on the icon my computer on your desktop and select properties for this information.

  Try Ctrl + Alt + Delete, select Task Manager, and then click the performance tab. Under Commit Charge, which is the Total, limit, and the pic?

  You gave us a general indication of the nature of the problem but the specific error reports are a much easier solution.

  When a BSOD (Blue Screen of Death) the system failure occurs, for most users, there not enough time to fully record what he says. the exact text is important for anyone trying to diagnose what is wrong. You can save time when the error occurs then by following the procedure described below.

  If you already did it disable the auto reboot system error. This should help by allowing the time to write the code to Stop error and related information correctly. Do right click on the icon my computer on the desktop and select Properties, advanced, startup and recovery, system failure and uncheck the box before automatically restarting. Re-do not enable automatic restart in the event of system failure after obtaining this information, this setting is the best left to not allow an automatic restart.

  If the failure occurs during the initialization of the computer, you need to try a different approach. You can access the Advanced Options Menu of Windows on multiple computers by constantly pressing the F8 (key) key when starting and selecting the option - disable automatic restart in case of system error. This method is not always easy to use because it may be difficult to press the F8 key at the right time. Try again if it doesn't work the first time. On some computers, a different key must be used.

  Event Viewer reports

  1. normally, when an error occurs on your computer looking in Event Viewer should be your starting point to find a solution. More related system errors are recorded and get an exact copy of the relevant report is important. Unfortunately, is not easy to understand reports and most of the users computer need help with their interpretation. I have to say later interpretation.

  2 Event Viewer includes three main newspapers of Windows. Here's the Application, security, and system. For purposes of troubleshooting system is by far the most important.

  3. to access the system log, select Start, Control Panel, administrative tools, Event Viewer, in the list on the left of the window select Windows and the system logs.

  4. a tip for posting copies of error reports! Run Event Viewer and double-click the error you want to copy. You will see a button resembling two pages. Click on the button and close Event Viewer. This places a copy of the report to your Clipboard. Paste it into the body of your message. Make sure that it is the first dough right out of the event viewer.

  5. He cautioned against three types of reports, information, and reports errors. In most situations, it is the error reports that offer the best information but sometimes WARNING reports provide useful clues.

  6. all reports have stamps date and hour and when troubleshooting, it is important to focus on the latest reports. Reports of studies from the point when the computer is started, and then check if a similar report appeared in the previous session. If errors do not repeat investigation as to why they happen is wasted effort.

  7. in the individual reports the most important information is the event ID and Source such as these help when looking for help on the internet. The description is just as important and copy the exact text to use as search criteria greatly helps achieve better results when using Google. Not paraphrase descriptions when other people asking for help.

  There are better alternatives freeware to Norton for a user running Windows XP.

• Windows 10 upgrade fails with the error C1900101-20006

  The current operating system is Windows 7 SP1.

  First test was about 6 months ago.

  At that time googling the error has not returned any hits at all.

  Hoping that the problem would resolve itself, or a kind of diagnostic information would become available I tried again today, but with the same result.

  I tried things like run the update utility and uninstall the virus check tool, but all the tests gave the same result.

  Is it possible that I can get more information about what is really causing the error, for example which driver is causing the problem?

  An additional piece of info is the error of update: is 0x80070005, which seems to be "access denied."

  The upgrade is already running as an administrator, and I run the SubInACL tool.

  Consider the following text:

  • How to: 10 tips before installing Windows 10
  • How to: 10 things to do if the Windows 10 install fails.

  Retry the upgrade manually:

  Option 1:

  Download the media creation tool

  Click with the right button on the MediaCreationTool.exe file and then click on run as administrator.

  

  Note: How to check if you are downloaded or installed the update Windows 10 November

  How to create an ISO or USB drive.

  Select upgrade this PC now and then click Next

  

  Option 2:

  Task of pre-required

  When you make significant changes to your computer for example updated operating system, you must always back up. See the links to resources on the backup by clicking the link for each version of Windows you are using: Windows XP, Windows Vista, Windows 7, Windows 8/8.1

  • How to back up and restore your files manually
  • How to free up disk space in Windows
  • How to: 10 tips before installing Windows 10

  then

  • How to download official Windows 10 ISO files
  • How to: upgrade previous versions of Windows using the file ISO for Windows 10

  then

  • Turn off (preferably uninstall) your Antivirus utility before you perform the upgrade.
  • Reboot several times, and then try again.
  • Disable the general USB peripherals (for example - smart card reader).
  • If you are using a SCSI drive, make sure you have the drivers available for your storage on a thumdrive device and it is connected. During the installation of Windows 10, click on the advanced custom Option and use the command load driver to load the driver for the SCSI drive. If this does not work and the installer still fails, consider switching to an IDE based hard drive.
  • Perform a clean boot, restart, and then try again.
  • If you upgrade to the. ISO file, disconnect from the Internet during the installation, if you are connected in LAN (Ethernet) or wireless, disable both, then try to install.
  • If you are updated through Windows Update, when download reaches 100% disconnect from the LAN (Ethernet) Internet or Wi - Fi, then proceed with the installation.
  • If this does not work, try using the. ISO file to upgrade if possible.
  • If you are connected to a domain, go to a local account.
  • If you have an external equipment, attached to the machine, unplug them (example, game controllers, USB sticks, external hard drive, printers, peripherals not essential).

• Cannot install KB980182 and KB981793 and get the error 800b0100 code

  Hello

  I found my Windows x 64 recently attempted to install KB980182 and KB981793 but failed each time. The error code is 800b0100. How to solve it?

  I installed Microsoft Security essential and no other installed Antivirus software.

  Thank you
  Wesley

  I suspect that you can see the effects of a hijackware infection, that is before installing MSE. That being said...

  ~~~~~~~~~~~~~~~~~~~~~~~~~~~

  Error message when you try to use Microsoft Update or Windows Update Web sites to install updates: "0x800B0100" [use of the Vista-specific resolution method]
  http://support.Microsoft.com/kb/956702

  How to reset the Windows Update components?
  [Skip the section to APPLY to if Win7;] Access KB971058 via Internet Explorer (32-bit) only. Run the difficulty in DEFAULT and AGGRESSIVE modes, then restart]
  http://support.Microsoft.com/kb/971058

  Visit the Microsoft Solution Center and antivirus security for resources and tools to keep your PC safe and healthy. If you have problems with the installation of the update itself, visit the Microsoft Update Support for resources and tools to keep your PC updated with the latest updates.

  Or you can...

  Start a free Windows Update support incident email request:
  https://support.Microsoft.com/OAS/default.aspx?Gprid=6527

  Buying to meet problems installing Microsoft security updates also can visit the following page for assistance:https://consumersecuritysupport.microsoft.com/

  For more information about how to contact your local Microsoft subsidiary for security update support issues, visit the International Support Web site:http://support.microsoft.com/common/international.aspx

  For enterprise customers, support for security updates is available through your usual support contacts.

  ~ Robear Dyer (PA Bear) ~ MS MVP (that is to say, mail, security, Windows & Update Services) since 2002 ~ WARNING: MS MVPs represent or work for Microsoft

• Complete reconstruction of reconciliation of accumulation - with the status of the error

  Dear members,
  
  I use Oracle R12.1.3 Vision Instance.
  
  When I ran the program of reconstruction of the reconciliation of accumulation, he finished with the below error: -.
  
  APP-FND-01564: Error ORACLE 942 in FDFGDF
  
  Cause: FDFGDF failed due to the ORA-00942: table or view does not exist.
  
  The SQL statement being executed at the time of the error was: SELECT CURRENCY_CODE FROM GL_SETS_OF_BOOKS WHERE SET_OF_BOOKS_ID =: a1 AND NOT EXISTS (SELECT ' x' FROM GL_MC_REPORTING_OPTIONS GMRO1, GL_MC_REPORTING_OPTIONS GMRO2 WHERE (GMRO1. PRIMARY_CURRENCY_CODE = GMRO2. REPORTING_CURRENCY_CODE OR GMRO1. REPORTING_CURRENCY_CODE = GMRO2. REPORTING_CURRENCY_CODE) AND GMRO1. ENABLED_FLAG = GMRO2. ENABLED_FLAG AND GMRO1. APPLICATION_ID = GMRO2. APPLICATION_ID AND GMRO1. REPORTING_OPTION_ID <>GMRO2. REPORTING_OPTION_ID AND GMRO1. ENABLED_FLAG = 'Y' AND GMRO1. APPLICATION_ID = 201 AND GMRO1. PRIMARY_SET_OF_BOOKS_ID =: a2 AND GMRO1. PRIMARY_SET_OF_BOOKS_ID = GMRO2. PRIMARY_SET_OF_BOOKS_ID) and was executed from the file & ERRFILE.
  
  Can someone help me please to solve.
  
  Thanks in advance.
  
  Kind regards

  Hello

  Please see the documentation below...

  Reconciliation of accrual Errored Out with APP-FND-01564: error ORACLE 942 in FDFGDF [ID 1440284.1]

  Kind regards
  Ivruksha

• VUM Scan host - host returns the error codes esxupdate: 10

  Morning everyone, I had trouble nailing this error code 10 I get all my hosts (ESXi 3 in total). Everywhere where I look it tells me that I am low on space, but when I check the outputs on all hosts, there seems to be more than enough available space.

  ~ # df h
  Size of filesystem used available use % mounted on
  visorfs 1.5 G 324.2 M 1.1 G 22%.
  VMFS3 499,8 G G 107.1 392,6 G 21% / vmfs/volumes/4ce1a8ee-814eb77e-1766-68b599e3df73
  vfat 285,9 M 140.7 M 145.2 M 49% / vmfs/volumes/3c3693e8-f77a642a-1910-5c6bdcb26d3a
  vfat 249.7 M 102.5 M 147.3 M 41% / vmfs/volumes/65092bef-de8a06b5-22db-2bbbc32dc3d2
  vfat 249.7 M 103.7 M 146.1 M 42% / vmfs/volumes/ff060de6-cecc88e5-4 d 14-8726d7ed0132
  VMFS3 499,8 G G 100.2 399,6 G 20% / vmfs/volumes/4ce1a92e-6c624d34-2cf3-68b599e3df73
  VMFS3 499,8 G 6.1 G 493.6 G 1% / vmfs/volumes/4ce1a909-d6b31dea-450f-68b599e3df73
  VMFS3 499,8 G G 281,6 218.2 G 56% / vmfs/volumes/4ce1a8cf-9914f00c-7975-68b599e3df73
  VMFS3 409,8 G G 204,8 205.0 G 50% / vmfs/volumes/4d5006ba-5fdcef08-6003-68b599e3df73
  ~ # vdf h
  Tardisk space used
  SYS1 201 201M M
  SYS2 55M 55 M
  SYS3                        1M        1M
  SYS4 12K 12K
  SYS5 12K 12K
  SYS6 42M 42 M
  SYS7 12M 12 M
  -----
  Size of the virtual disk used available use % mounted on
  MAINSYS 32M 4M 27M 14%-
  tmp 192M 4K M 191, 0%-
  updatestg 750M 64 K 749M 0%-
  78M 3 m 74 M 5% hostdstats-
  AAMconfig 128M 3 m 124M 2%-
  ~ #

  When I was looking for the VUM records the only thing I see is intresting is;

  Certificates to host television is not complete.
  [2011-02-23 09:38:59.652 02884 WARNING "Libs"] SSLVerifyIsEnabled: cannot read the registry value. Falling back to the default behavior: check off the coast. LastError = 0
  [2011-02-23 09:38:59.652 02884 WARNING "Libs"] SSLVerifyCertAgainstSystemStore: Verification of the certificate is disabled, so connection will continue despite the error
  [2011-02-23 09:38:59.652 02884 WARNING "Libs"] SSLVerifyCertAgainstSystemStore: The certificate of the remote host has these problems:

  vC and ESXi hosts are all up to date with 4.1u1 and I've also updated VUM and wasn't to ggetting no problem before these updates.

  Thank you

  Im having the same problem on 4 ESXi hosts.  IM wondering if it is the same problem on esxi embedded and installable? Mine are integrated and I used the Update Manager.

  Problem solved.  Spoke with VMWare and it looks like a bug.  They had me restart my hosts a second time and the errors disappear.  Then, after running the 4.1 update 1 on my hosts, and after that they charge, I ran a scan where I got the error.  The restarted again and now they work very well.

• get the error when the index built ora-00701

  Hi gurus
  
  I'm rebuilding the index of my large database around 1 800 GB. I get the following error:
  
  
  ERROR on line 1:
  ORA-00701: required object for warmstarting database cannot be changed.
  ORA-06512: at line 11 level
  
  BANNER
  ----------------------------------------------------------------
  Oracle Database 10 g Enterprise Edition release 10.2.0.3.0 - 64bi
  PL/SQL version 10.2.0.3.0 - Production
  CORE Production 10.2.0.3.0
  AMT for IBM/AIX RISC System/6000: Version 10.2.0.3.0 - production
  NLSRTL Version 10.2.0.3.0 - Production
  
  
  Note: expdp runs when I m try to rebuild the index. It is problem?
  
  
  Please give me your valuable advice.
  
  
  Rwgards
  
  Rabi

  My advice is

  - always, really ALWAYS consult all the error messages in the online documentation

  Your question is redundant and a waste of volunteer time as the error message is explicit.

  You try to rebuild the index of dictionary tables needed at startup of the database.
  It is not possible.

  Solution: do not rebuild the index.
  Also: apologize for not "do what is necessary."
  ----------------
  Sybrand Bakker
  Senior Oracle DBA

• Worklistapp of sample request giving the error HTTP 404 or 500 Internal server

  Hello
  
  I get the error when I access the sample application below. integration / http://localhost:7777 / worklistapp
  
  Internal server error
  The server has encountered an internal error or misconfiguration and was unable to respond to your request.
  Please contact the server administrator, [email protected] and inform them of the time, is the error occurred and anything you might have done that may have caused the error.
  
  More information about this error may be available in the server error log.
  
  Error log contains
  
  [9 Jun 18:14:45 Mar 2009] [error] [client xx.xx.xx.48] [ecid: 1245550,0] mod_oc4j: there is no process oc4j (destination: application://hw_services) available to the service request.
  
  If I take the SOA, then I get HTTP 404 error
  
  Error log contains
  
  [9 Jun 18:53:44 Mar 2009] [error] [client xx.xx.xx.48] [ecid: 0, 124:0:8] file does not exist: / oas/app/soa/Apache/Apache/htdocs/integration/worklistapp
  
  Y at - it all configurations must be made to access the sample application.
  
  BPELAdmin and BPELConsole works well.
  
  Thank you
  Sree
  
  Published by: user11159690 on June 9, 2009 22:18

  What other 2 applications?

  see you soon
  James