Workout app automatically turn on

Similar Questions

• Workout App does not define 'fast market' equivalent?

  When I use the app to drive on my Apple Watch when I went up on a normal bike, not all of my journey is considered to be a workout.  I can be riding for an hour, but the app decides that the only parts of this time count for a workout.  The explanatory note said I have to do the equivalent of a brisk walk.  What is c?  Is it using my pulse?  If so, it's too bad because I take the medication that slows down quite to the bottom of my heart rate and it is very difficult to be in green all the time.  My bike course map is painted in green, yellow and Red areas.  So if I stop briefly for traffic, it is red and does not count.  If it's yellow, it doesn't count... so it appears.  This means that a one hour bike ride can have only 15 minutes of training time.  That makes no sense to me.  Have I not that bad?

  Tracy Rog wrote:

  ..  The explanatory note said I have to do the equivalent of a brisk walk.  What is c?  Is it using my pulse?  ..

  Progress towards your daily goal of exercise of credit, the application of the activity is to identify the activity equal or exceed the intensity of a brisk walk. This requirement applies as well to the general course daily wear and record training sessions through the training exercise credit app which is awarded for each minute during which this condition is met.

  The definition of a brisk walk varies from one person to another and depends on your personal information.

  To verify that this is correct - and update over time:

  • On your iPhone, in the application of the watch, go to: My Watch (tab) > health > edit - tap and adjust the settings, then press on in fact.

  Apple Watch uses different sensors and data sources to track the results of training sessions, depending on the type of activity. For example, with Apple Watch (first generation) and the models of series 1, the watch can access data matched iPhone GPS if it is taken along during the walk outdoors, running and cycling training. (Series 2 has built-in GPS).

  Calibrate your watch can improve the accuracy of the estimates made by the activity and workout app app. More information and instructions for calibration of your watch are available via the link below. The article also includes instructions for resetting the calibration data and leave.

  If you prefer to receive credits of exercise during the duration of your training sessions, regardless of their estimated intensity levels, follow them through the application of the training session using 'Other' as the type of activity. This credit a minute of exercise for each minute of the workout. Active calories will be estimated at a rate equivalent to a brisk walk or based on the data recorded by the heart rate sensor, according to what is higher.

  More information:

  • Calibrate your Apple Watch for better accuracy of training and activity - Apple Support
  • Use the activity on your Apple Watch - Apple Support
  • Use of the workout on your Apple Watch - Apple Support

• Is there a way to stop the countdown rehearsal before she goes off without open the alarm app and turning works?

  Is there a way to stop the countdown rehearsal before she goes off without open the alarm app and turning works? Basically, if I'm ready to get up and there are 4 minutes remaining on the countdown of repetition which is the fastest way to 'Cancel' the snooze and alarm?

  There isn't a way, I discovered that allows me to do without invoking the alarm and the alarm clearing application

• my Iphone 5 was automatically turned off, and then I couldn't go? What is the problem please help me?

  my Iphone 5 was automatically turned off, and then I couldn't go? What is the problem please help me?

  Have you tried to connect your iPhone to iTunes or the wall charger and let your iPhone for 5-10 minutes to charge its battery?

• Workout app run cards?

  Hi all!

  Even if I take my iPhone with me, training app still will not produce an outdoor performance map? You have to use a third party app?

  Hi Marc

  Integrated workout app does not support mapping, even if your iPhone is taken along.

• This app can turn on TV?

  Hello

  I have sony internet TV 40HX750 and iphone4s.

  I can use this app to turn off the TV but can not turn on.

  First of all, I need to use IR remote power on TV then can use command TV APP.

  It works like the design? or the problem of my TV?

  If so, can you add this feature in the future?

  I found this TV always connect Router even I turned off the TV.

  So I think it should can wake on lan.

  Thank you

  Alexis

  Hello

  Welcome to the community of Sony!

  Information on the options available to the Media Remote application are mentioned on the page below:

  http://www.KB.Sony.com/selfservice/documentLink.do?externalId=C1020792

  If my post answered your question, please mark it as an "acceptable Solution".

  Thank you for your message.

• Workout app question

  The second day I was wearing my watch, he said that I finished 433 minutes of the goal of exercise of 30 minutes!  Every day since then, I can do 10 minutes.  With similar activities on all these days.  Everyone knows this?

  Hello

  Progress towards your daily goal of exercise of credit, the application of the activity is to identify the activity equal or exceed the intensity of a brisk walk. When you are not using the application of training, enforcement activity depends on your arm (measured by the built-in accelerometer) movement to follow the movement to this end, your arms swinging allow it naturally as you walk or run.

  Result of your exercise, the second day may have been caused by various factors, as for example: misinterpretation of your arm movements, a workout (in the application of the workout) who was market for longer than expected and/or incorrect personal information have been reported.

  To verify that your personal information is accurate (and update over time):

  -On your iPhone, in the application of Eve, go to: My Watch tab > health > Edit - tap and adjust the settings, then press on in fact.

  You can also calibrate your watch, which will help improve the accuracy of the estimates (including the appropriations for the year) made by the activity and workout app app. More information and instructions on how to calibrate your watch are available via the link below.

  More information

  Calibrate your Apple Watch for better accuracy of training and activity - Apple Support

  Use the activity on your Apple Watch - Apple Support

  Use of the workout on your Apple Watch - Apple Support

  If you have not already done so, it can also help to update your iPhone and Apple Watch for the latest versions of software (currently 9.2 and watch OS 2.1 iOS):

  - Update the iOS on your iPhone, iPad or iPod touch - Apple Support software

  - Update the software on your Apple Watch - Apple Support

• Hot Yoga now I watch workout app?

  Is it possible to add Hot Yoga on my i shows workout app?  I want to get the best possible results for the calories count etc.

  Thank you

  Hello

  You find another type of activity most suitable for recording of yoga within the app to training.

  However, if you plan to port Apple Watch during the hot yoga, be aware of the Important address information in the Apple Watch user's Guide. This includes:

  • Apple Watch is designed to work best with an ambient temperature between 32 ° and 95 ° F (0 ° and 35 ° C).
  • Apple Watch can be damaged and if used outside the temperature range specified shortened battery life.
  • Do not expose the Apple Watch any major changes of temperature or moisture.
  • Usage examples that can affect Apple Watch water resistance and should be avoided include the door in the room of sauna or Hammam.
  • More information: https://help.apple.com/watch/#/apd707b42a5e

  Keep in mind that, under the terms of the warranty limited one-year (a similar exclusion applies also to the AppleCare +), Apple is not responsible for the damage arising from the failure of the user to the instructions for use of the product.

• Microsoft security essentials automatically turned off by Group Policy windows Defender?

  Microsoft security essentials automatically turned off by Group Policy windows Defender? I have win. Vista 32-bit. the only antivirus program I have is microsoft security essentials.  I try to open windows defender and I get a message window... Windows Defender is disabled by group policy.   Windows Defender does not provide protection against harmful or unwanted software and it won't send you alerts because it is off.    To help protect your computer against the harmful or unwanted software please contact your system administrator to enable Windows Defender by group policy.

  Thanks a lot in advance, have a nice day<^~^>
  (0-0)
  (__)

  Yes.

  http://answers.Microsoft.com/en-us/Windows/Forum/Windows_7-Security/Windows-Defender-and-Microsoft-Security-Essentials/3b34f29f-c89c-4044-ad42-4587651c0618

• That is the app automatically downloads every three hours suck huge amounts of data?  How do I turn it off?

  On the iPhone 6 sec, that either the app downloads every 3 hours, using huge amounts of data?

  As nobody here knows what applications do you have on your phone, there is no way we could answer that.

  To start to figure it out, go to settings > cellular and made scroll down to see which applications are using a large amount of data. Disable cellular data for those who use a lot without reason you can think and see if this will have an impact.

  Also, many carriers use only newspaper given every so many hours. Maybe it's a running total for these three hours.

• Helps the workout App Display

  How to customize the app to drive to show me the heart rate, distance and calories status all on the same screen during an indoor workout?

  Hello

  It is not currently possible to display the heart rate, distance and calories status on the same screen when using the app to drive to record an indoor workout.

  Training app can currently view your goal and two metrics:

  • The metric of time (top-right):
    • This can be changed by tapping it, switching between the time of day and the elapsed time.
    • For inside and outside running and walking workouts, pace is also available.
    • For an outdoor cycling training, speed is also available.
  • The primary metric:
    • This can be changed by sliding on the side on this subject.
    • Depending on your type of activity, the choice may include: time, active calories, total calories, heart rate, rhythm, speed and distance.
  • The goal:
    • The objective can be considered as a ring of progress or for distance, calories or the time objectives, as a metric.
    • On your iPhone, in the application of the watch, go to: My Watch (tab) > training > turn on show metric goal.

  However, note that watch OS 3 - coming this fall / fall - allows you to view up to 5 parameters of training at a time without having to swipe: distance, pace, calories, heart rate active and out of time.

  More information:

  Use of the workout on your Apple Watch - Apple Support

  http://www.Apple.com/Watchos-preview/

• Watch OS 2.2.1 workouts App display zoom

  I guess it's just a bug that will have to wait for an update from Apple (watch OS 2.2.2), but everyone having display problems with the App of workouts after the 2.2.1 update. In my case, that the display is enlarged to about 125 to 150%, which means that the content on the edge of the screen is cut off. It is large enough so that I can't, for example, see the most significant digits of the information. (For example, instead of "3.15" miles, all I can see is ".") 15 '' because 3 is cut.) Is there maybe some accessibility setting that I can reset?

  Hello

  Zoom (an accessibility function) has been activated on your watch.

  • To turn off the Zoom:
    • On your iPhone, in the application of the watch, go to: My Watch (tab) > general > accessibility > Zoom - put it off.
    • Or on your watch, go to: homescreen (via a simple press on the digital Crown) > (cog icon) settings > general > accessibility > Zoom - tap and enable / disable.
  • If the accessibility shortcut has been enabled and configured for the Zoom, you can also enable and disable functionality more conveniently:
    • On your watch: quickly press digital Crown (the round button) three times in a row.
  • To set up accessibility shortcuts:
    • On your iPhone, in the application of the watch, go to: Watch My > general > accessibility > accessibility shortcut (bottom) > select / deselect Zoom.

• Effects will automatically turn off.

  Regularly after 2/3 days effects (when opening application it is effect type zoom to open the application or at the opening of the iphone lock) turns off automatically. Also during the opening of multitasking or any application. After you restart the iphone, it resolved for 1/2 days. And yet, the question arises after 2/3 days.

  We can show in pictures how effect stops. So I can not download.

  Before I aksked this question if someone suggest me to reset all the settings and force restart but the issue will come back after 2/3 days.

  Please solve out!

  Try settings - general - accessibility - reducing Motion-- rocking MARKET and see if one of them is to your liking

• Portege Z20t-C-121 screen does not automatically turn into tablet mode

  Hello

  We bought a Portege Z20t-C-121 to test as a replacement for some of our leaders. I have built with Windows 10 company and installed all the drivers latest on the Toshiba site. A WiFi Intel driver did not work properly so I downloaded and installed from the Intel Web site.

  The only thing that I can't work seems to be the automatic rotation of the screen; When I dock the screen to use as a Windows Tablet detects this and goes into tablet mode, but however I turn the screen remains in the same landscape as it was when it was docked.

  Name of the operating system: Microsoft Windows Enterprise 10
  OS version: 10.0.10586 n/a build 10586

  Can someone tell me what I need to do to get this feature works please?

  Have you installed the drivers Win8 or Win10?

  Have you installed the driver system of Toshiba and Toshiba system settings?

• HP 7520: reinstalled OS now will not automatically turn on

  I recently reinstalled my operating system and since then could not get the printer to behave in the way which he used to.  (don't know if it's important but MacBook Pro is my system, Yosemite running).

  Before the new operating system when we invited a document to print, the printer wireless turn what ever computer or device.  Now he must go, and then press the power button and it does never print the document that we asked.

  Do I need to uninstall and reinstall the printer, or play with icloud?  I was the one who initially put in place and I don't see what I did differently this time around who has messed up the settings.   Any suggestions?

  Hey @Jewelya,

  Welcome to the Forums of HP Support!
  
  I understand that since the upgrade your computer Mac OS X for Mac OS X 10.10 Yosemite, your HP Photosmart 7520 e-all-in-one printer was not run correctly for you. I would like to help you to solve this problem today. Now, because your printer is unable to 'wake up' and do the printing for you automatically, it is possible that there is a driver conflict occurring. Can I please have performed you the steps below to resolve any conflict potential driver and software.

  Step 1: Uninstall the drivers and software:

  It is important to have a nice clean slate to work with. To establish which can, I you start by clicking here and executes the steps under 'Reset the printing in OS X Lion system' that the steps are the same for your Mac OS X 10.10.  On your Mac computer printing system reset will delete each printer to the computer, but does not uninstall printers. Therefore, if you use other printers on your Mac computer just to make sure they are connected via a USB cable or the connection or connected to the network and (+) add in. rear not to add your device HP Photosmart back by now.

  Once the reset is complete, please click here for the steps to uninstall the software and drivers for your computer. Please click on the drop down menu 'Mac OS X v10.6, OS X v10.7, OS X v10.8 and OS X v10.9' and run the appropriate uninstall steps.

  Once the uninstall is complete, proceed to the next step.

  Step 2: Check and repair your Mac disk permissions:

  1. Open Macintosh HD and go to Applications
  2. Go to the Utilities folder
  3. Open disk utility
  4. Select the hard disk volume, you use (usually on the left)
  5. Select verify disk permissions
  6. Once this process is complete, select repair disk permissions

  Step 3: Check the Apple updates:

  1. Go to the Apple
  2. Select System Preferences
  3. Select software update
  4. Click update now
  5. Install your available updates
  6. Computer restart

  Step 4: Reinstall your software and drivers:

  Please click here to download the appropriate drivers for Mac OS X 10.10 for printer you. Once the open site, please select the download button at the top left. Do run all the instructions on the screen to reinstall your printer.

  Once installation is complete, please try printing to verify that the problem has been resolved.

  Please reply to this message with the result of your troubleshooting. Good luck!