timetable hours: begin the day at 08:00 and 12:00 watch
With the calendar in OS X app, I have preferences set for the start of the day is from 08:00. But my calendar for day and week, begins at 12:00. I'm doing something wrong? How can I get the views of day and week start later at midnight?
I think you have the 'Show' a value of 24 hours. Set it to something like 16 hours or less.
Tags: Mac OS & System Software
Similar Questions
-
Why is my desktop standby stop so often?
It appeared sometimes several times per day or night. He stops consecutively, at random, at any time of day or night time. Even when I was with the computer, there is no incentive to me. The screen is blank. My computer nevers switch down. It's on 24/7-24 hours and 7 days, 365 days.
It happened like this:
1. you can hear the exhaust off the computer fan all of a sudden. There was no incentive. You can hear computer calmed down suddenly. The fan can be seen from the back of the grid of ventilation of the processor of the computer of the metal casing.
2. the screen monitor suddenly stop. The screen is blank. The indicator light on the bottom of the screen of the monitor is always lit. He showed the monitor screen is on and running.
3. When you look at the led on the computer, it is still lit. This shows that the computer has on photo and runnig. It is dormant, however. He showed the computer CPU is entered in mode 'sleep'.
4. whenever this judgment occurs, I would like to shut down the computer and restart the computer from scratch. I pressed the power button on the computer to stop it.
5. I then press again the start/stop button to restart the computer, restart the computer, and then when she comes back to life, I clicked to restore sessions, and then I keep using the computer again.
6. the process of restarting the computer was like that, as stops have been going like that for five months and is always like that, because I have been unable to solve. The point of contact in the power button is not more urgent are frequent.
7. I changed the VGA cable as I said by a computer hardware that my problem could be due to the VGA cable is old, as in the VGA cable copper wire that feeds on the computer to the monitor screen can be broken or twisted, and so the video signals are not stable to feed the data to the screen of the monitor.
8. Although I don't think that was the case, as my cable never touched the ground, or cluttered or kick or broken, I still went ahead to change the existing cable 15 pin VGA to 3 years with a new as it was only 3 males - the range of the cheapest I found in the shop costs...
9. However, even if the VGA cable is changed, the stop is always the same, as before.
10. on another month, I learned by my friend that I should change the setting in the computer mode 'sleep'.
11. the new settings made in start/programs/system and Security / Option/power Power Plan/High Performance / 'Turn off display' to 'Never' and 'Put on the eve of the computer' to 'never '.
12 even if I changed the setting of "Balanced (recommended) 'High Performance'" and two high-performance setting has been changed to "Never", the judgment fixed computer sleep mode, and as usual, no warning, the screen of the monitor erased.
13. it seems the Option "power" and "Power Plan" and "Balanced" or "High Performance" in Windows 7 does not work. Window 7 does not in my computer.
14. whenever I rebooted and restarted the computer, it is some normal time to see the operating system, repair files stop suddenly, before may be back from normal window of operation conditon.
15. for more information,.
My computer is not a brand. It was customized and installed. He bought two or three years ago. The use of the 350 GB hard drive is used by 50%. The computer in the past goes to sleep when there is no movement of the mosue for 15 minutes, or when not in use. He wakes up again when there mouse moves to restart the CPU and turn on the monitor screen.
Now, he had problem with this kind of stop suddenly attack never wake up its "sleep" again during the month five, which I believe it was several viruses in the files of e-mail in the past months, and when it is very likely that I downloaded from CNET some cleaners or anti-spyware. I don't know what problem is.
I then withdrew them a month later of the program/Control Panel / uninstalled program. On the advice of my friend, I then changed version free download AVG.
16. the information contained in the computer, start/program/computer/properties, gives the following information:
It's Intel Core Due E7500 @ 2.93 Ghz, 4 GB of Ram, 32-bit operating system, windows 7 Home Premium, 2009.
It is a Microsoft Firewall protection and is installed with fre download AVG anti-virus protection. He is shown to start/program/system and security / firewall /- and he said: 'Stat window firewall' is 'on '.
17, finally, with the light of the foregoing, I would sincerely ask the Microsoft community to help solve this problem of closure. I would like to thank all the people in the community who can help me in advance here.
18. I hope to hear your solutions with you. Thank you.
Run "cleaners" or optimizers may have caused a number of problems.
And since you have them installed some time ago a system restore won't help.
Run the System File Checker
http://www.SevenForums.com/tutorials/1538-SFC-SCANNOW-Command-System-File-Checker.html
Run a scan for malware http://www.malwarebytes.org/products/malwarebytes_free/
Maybe to repair your installation of win
Ensure that the chipset drivers have been updated by the author of the motherboard
-
Count the days back by year and month?
In my doc, I have 7 text fields (Sun, Mon, Mar, sea, game, Fri, SAT). I use another field enter a date. When I enter an end date, I have 7 fields to be filled with dates. For example, if I enter the date field 06 18, 2016, I wish I had the 7 fields like this, Sun would show 12, Lun would show 13, AUT show 14, sea would indicate 15, game show 16, Fri would show 17 and Sam would have 18. I'm counting the days is backwards because I'm coming the weekend of date (always a Saturday).
What I'm running is the month before sometimes will have 30 days, some months have 31 (and of course leap years). Thus, for example, if I choose 2 July 2016 days should come back like that, Sun should see 26, LUNs should show 27, Tue should show 28, sea should show 29, that game should show 30, Fri should show 01, Sam should show July 02.
How can I do this correctly? I need a javascript smart thing to do. Can someone please help me with an example? Thank you.
Here is a link to a sample form that shows how you can do this: http://acroscript.net/pdf/demos/populateWeek.pdf
The script is located in the field Validate event entry date. Note that day fields use a special naming convention that allows a simplification of the code, so you have to use a similar model.
-
Australis - now begins the great death of Agifts and third-party themes?
Following the evening and Aurora series with great interest. And after checking out now the UX every night with more advanced parts of Australis seen in preview...
Later still can I themes and available Agifts? I know that Mozilla plans to simplify the browser as "everyday computer users could feel overloaded" - but is it really necessary that you break a lot of Agifts and especially the Complete 3rd themes part?
Not a single 3d Party theme I've tried with UX does more, no problem with Aurora Alphas and normal nightly.
You really should perhaps also think about more advanced users, because taking this features beloved away from us, to make the simplest of Google Chrome similar Firefox - is not just good things!
So please, do not remove Agifts and theme Support!
John,
UX / Australis has changed since 03-28 and this is what it looks like on WinXP. Poor compared to Win7, IMO.
-
All the events of the day at GMT + 0 an hour off during summer time
In my view, there is an error in the BlackBerry API on the beginning and end of Daylight Savings time (DST) to GMT + 0
In 2011, DST begins on last Saturday of March and ends on the last Saturday of October. The BlackBerry API is back for me it begins the last Saturday of February and ends on the last Saturday of September. Therefore, any all-day event for a user to GMT + 0, which occurs between the last Saturday of February and last Saturday of the month of March, OR between the last Saturday of September and the last Saturday in October will be one hour (which translates as a GMT + 0 day) to come.
I have the BlackBerry March 2011 update DST installed on my device.
Is this a known issue? Is there a known workaround solution?
Thanks in advance for any input
If you're interpretation month January 1, and in fact for the month January 0?
-
Made the trail 30 for all applications begin as soon as you download the trial version of the creative cloud? Or the test for Photoshop 30 days begins the day you install Photoshop regardless of when you downloaded the trial version of the creative cloud and installed Lightroom?
It is the date of installation that counts, but sometimes the 30 day trial may finish early, especially if you change something on your system (for example, hardware, clock, etc. system restore).
-
Calculation of how many users is recorded in a system throughout the day
Hello
We have a relationship with a sizeable Decode statement including the bands up after connection of users for a period of the day. Does so at intervals of 15 minutes.
This is really useful for us because we can see volumes of people by logging into our system during the day. Here's the bohemoth that is our decode the statement:
DECODE(Login Time,( LEAST(GREATEST(Login Time,'00:01'),'00:15') ),'00:15',( LEAST(GREATEST(Login Time,'00:16'),'00:30') ),'00:30',( LEAST(GREATEST(Login Time,'00:31'),'00:45') ),'00:45',( LEAST(GREATEST(Login Time,'00:46'),'01:00') ),'01:00',( LEAST(GREATEST(Login Time,'01:01'),'01:15') ),'01:15',( LEAST(GREATEST(Login Time,'01:16'),'01:30') ),'01:30',( LEAST(GREATEST(Login Time,'01:31'),'01:45') ),'01:45',( LEAST(GREATEST(Login Time,'01:46'),'02:00') ),'02:00',( LEAST(GREATEST(Login Time ,'02:01'),'02:15') ),'02:15',( LEAST(GREATEST(Login Time,'02:16'),'02:30') ),'02:30',( LEAST(GREATEST(Login Time,'02:31'),'02:45') ),'02:45',( LEAST(GREATEST(Login Time,'02:46'),'03:00') ),'03:00',( LEAST(GREATEST(Login Time,'03:01'),'03:15') ),'03:15',( LEAST(GREATEST(Login Time,'03:16'),'03:30') ),'03:30',( LEAST(GREATEST(Login Time,'03:31'),'03:45') ),'03:45',( LEAST(GREATEST(Login Time,'03:46'),'04:00') ),'04:00',( LEAST(GREATEST(Login Time,'04:01'),'04:15') ),'04:15',( LEAST(GREATEST(Login Time ,'04:16'),'04:30') ),'04:30',( LEAST(GREATEST(Login Time,'04:31'),'04:45') ),'04:45',( LEAST(GREATEST(Login Time,'04:46'),'05:00') ),'05:00',( LEAST(GREATEST(Login Time,'05:01'),'05:15') ),'05:15',( LEAST(GREATEST(Login Time,'05:16'),'05:30') ),'05:30',( LEAST(GREATEST(Login Time,'05:31'),'05:45') ),'05:45',( LEAST(GREATEST(Login Time,'05:46'),'06:00') ),'06:00',( LEAST(GREATEST(Login Time,'06:01'),'06:15') ),'06:15',( LEAST(GREATEST(Login Time,'06:16'),'06:30') ),'06:30',( LEAST(GREATEST(Login Time ,'06:31'),'06:45') ),'06:45',( LEAST(GREATEST(Login Time,'06:46'),'07:00') ),'07:00',( LEAST(GREATEST(Login Time,'07:01'),'07:15') ),'07:15',( LEAST(GREATEST(Login Time,'07:16'),'07:30') ),'07:30',( LEAST(GREATEST(Login Time,'07:31'),'07:45') ),'07:45',( LEAST(GREATEST(Login Time,'07:46'),'08:00') ),'08:00',( LEAST(GREATEST(Login Time,'08:01'),'08:15') ),'08:15',( LEAST(GREATEST(Login Time,'08:16'),'08:30') ),'08:30',( LEAST(GREATEST(Login Time,'08:31'),'08:45') ),'08:45',( LEAST(GREATEST(Login Time ,'08:46'),'09:00') ),'09:00',( LEAST(GREATEST(Login Time,'09:01'),'09:15') ),'09:15',( LEAST(GREATEST(Login Time,'09:16'),'09:30') ),'09:30',( LEAST(GREATEST(Login Time,'09:31'),'09:45') ),'09:45',( LEAST(GREATEST(Login Time,'09:46'),'10:00') ),'10:00',( LEAST(GREATEST(Login Time,'10:01'),'10:15') ),'10:15',( LEAST(GREATEST(Login Time,'10:16'),'10:30') ),'10:30',( LEAST(GREATEST(Login Time,'10:31'),'10:45') ),'10:45',( LEAST(GREATEST(Login Time,'10:46'),'11:00') ),'11:00',( LEAST(GREATEST(Login Time ,'11:01'),'11:15') ),'11:15',( LEAST(GREATEST(Login Time,'11:16'),'11:30') ),'11:30',( LEAST(GREATEST(Login Time,'11:31'),'11:45') ),'11:45',( LEAST(GREATEST(Login Time,'11:46'),'12:00') ),'12:00',( LEAST(GREATEST(Login Time,'12:01'),'12:15') ),'12:15',( LEAST(GREATEST(Login Time,'12:16'),'12:30') ),'12:30',( LEAST(GREATEST(Login Time,'12:31'),'12:45') ),'12:45',( LEAST(GREATEST(Login Time,'12:46'),'13:00') ),'13:00',( LEAST(GREATEST(Login Time,'13:01'),'13:15') ),'13:15',( LEAST(GREATEST(Login Time ,'13:16'),'13:30') ),'13:30',( LEAST(GREATEST(Login Time,'13:31'),'13:45') ),'13:45',( LEAST(GREATEST(Login Time,'13:46'),'14:00') ),'14:00',( LEAST(GREATEST(Login Time,'14:01'),'14:15') ),'14:15',( LEAST(GREATEST(Login Time,'14:16'),'14:30') ),'14:30',( LEAST(GREATEST(Login Time,'14:31'),'14:45') ),'14:45',( LEAST(GREATEST(Login Time,'14:46'),'15:00') ),'15:00',( LEAST(GREATEST(Login Time,'15:01'),'15:15') ),'15:15',( LEAST(GREATEST(Login Time,'15:16'),'15:30') ),'15:30',( LEAST(GREATEST(Login Time ,'15:31'),'15:45') ),'15:45',( LEAST(GREATEST(Login Time,'15:46'),'16:00') ),'16:00',( LEAST(GREATEST(Login Time,'16:01'),'16:15') ),'16:15',( LEAST(GREATEST(Login Time,'16:16'),'16:30') ),'16:30',( LEAST(GREATEST(Login Time,'16:31'),'16:45') ),'16:45',( LEAST(GREATEST(Login Time,'16:46'),'17:00') ),'17:00',( LEAST(GREATEST(Login Time,'17:01'),'17:15') ),'17:15',( LEAST(GREATEST(Login Time,'17:16'),'17:30') ),'17:30',( LEAST(GREATEST(Login Time,'17:31'),'17:45') ),'17:45',( LEAST(GREATEST(Login Time 17:46 ') ((, 18:00 ')), 18:00 ', (LESS (LARGER (connection time, 18:01 '), 18:15 '))
),'18:15',( LEAST(GREATEST(Login Time,'18:16'),'18:30') ),'18:30',( LEAST(GREATEST(Login Time,'18:31'),'18:45') ),'18:45',( LEAST(GREATEST(Login Time,'18:46'),'19:00') ),'19:00',( LEAST(GREATEST(Login Time,'19:01'),'19:15') ),'19:15',( LEAST(GREATEST(Login Time,'19:16'),'19:30') ),'19:30',( LEAST(GREATEST(Login Time,'19:31'),'19:45') ),'19:45',( LEAST(GREATEST(Login Time,'19:46'),'20:00') ),'20:00',( LEAST(GREATEST(Login Time,'20:01'),'20:15') ),'20:15',( LEAST(GREATEST(Login Time ,'20:16'),'20:30') ),'20:30',( LEAST(GREATEST(Login Time,'20:31'),'20:45') ),'20:45',( LEAST(GREATEST(Login Time,'20:46'),'21:00') ),'21:00',( LEAST(GREATEST(Login Time,'21:01'),'21:15') ),'21:15',( LEAST(GREATEST(Login Time,'21:16'),'21:30') ),'21:30',( LEAST(GREATEST(Login Time,'21:31'),'21:45') ),'21:45',( LEAST(GREATEST(Login Time,'21:46'),'22:00') ),'22:00',( LEAST(GREATEST(Login Time,'22:01'),'22:15') ),'22:15',( LEAST(GREATEST(Login Time,'22:16'),'22:30') ),'22:30',( LEAST(GREATEST(Login Time ((((,' 22:31 '),' 22:45 ')),' 22:45 ', (LEAST (GREATEST(Login Time,'22:46'),' 23:00 ')),' 23:00 ', (LEAST (GREATEST(Login Time,'23:01'),' 23:15 ')),' 23:15 ', (LEAST (GREATEST(Login Time,'23:16'),' 23:30 ')),' 23:30 ', (LEAST (GREATEST(Login Time,'23:31'),' 23:45 ')),' 23:45 ', (LEAST (GREATEST(Login Time,'23:46'),' 00:00 ')))
Isn't beautiful! I just wanted to share this.
Now, what would be really great, is if we could run off statistics on how many people is connected at some point in the day. We are able to report on the user login time and their time of disconnection in any logon and the band upwards in this way. However, if John D connects to 09:00 and 10:00 out newspapers, we would expect to be counted at 09:00, 09:15, 09:30, 09:45 & 10:00 when he was for that entire period.
We do not know if this is possible, but any help is really appreciated.
Thank you
LloydHello
I guess you have the logon_time and the logoff_time in your folder and you want to add up the number of users when connected on every quarter of an hour during the day.
To do this, you must use a generator of line because there is a line for once connected to an hour, but it takes five times for each quarter of an hour. You can use a custom line generator folder. It's just a folder that will always return a fixed number of lines. You will need to create a Dumpy field in the custom folder of row_gen to join your existing folder. In this example, I created a dummy scope recurring X. You can then create a calculated item in your folder which also always returns X and join the two files together using this fake field.
The line generator must create a line for each quarter during the day. For example,.
SELECT 'X' model, TO_CHAR (hrs, 'fm00') |': ' | To_char (MN * 15, 'fm00') hhmm
FROM (SELECT rownum-1 hrs OF DOUBLE CONNECTION BY ROWNUM<=24)>=24)>
(SELECT rownum-1 mn DOUBLE CONNECTION BY ROWNUM<=4)>=4)>You can reach this custom in your timings folder folder using the dummy field, but also include extra in your workbook join conditions so that there is a line that is generated for each quarter that the user is connected. There is some complexity if the user logs on another day. The join conditions must pick up all the lines power supply line for the duration of the user session. So you need to get conditions like this:
(logon_time<= logoff_time="" --="" logged="" on="" and="" off="" on="" the="" same="">=>
AND (row_gen.hhmm BETWEEN logon_time AND logoff_time))
OR
(logon_time > logoff_time - logged on and off the different days)
AND (row_gen.hhmm logon_time TO 23:45 ')
GOLD row_gen.hhmm BETWEEN ' 00:00 ' AND logoff_time))You can then include the row_gen.hhmm report and count the number of users. This will give you the number of users connected to each quarter throughout the day.
By the way you do not have a big decode statement. There are a number of other techniques that you could use as the beginning of the quarter and end of time stored in a separate folder.
Rod West
-
My system does not have a recovery partition which is accessible and I don't have the DVD to recover my system. I bought my computer the day Vista came out and wanted the XP but the store would not give me an our sell me an XP cd or dvd. I've was stuck with Vista and was not even given a DVD in case of system failure.
Hello
Normally, the recovery on a system partition is accessible by using a F key at the start of the initial system. For the corresponding key or combination of keys, see the documentation for your system or online from the manufacturer support.
If you need a recovery media, you will need to contact the manufacturer for such. Do not use a retail disk as often, they do not contain the necessary drivers for the owner builder systems.
Good luck, Rick Rogers, aka "Crazy" - Microsoft MVP http://mvp.support.microsoft.com Windows help - www.rickrogers.org
-
Portege R500: external monitor does not work with the Port Replicator Port 2 and DVI
I have a Portege R500 running Vista with a slim Port Replicator II and digital monitor Viewsonic.
I connected the monitor to the DVI port on the port replicator and got it to work OK.
Press fn + F5 would switch between the computer screen and the external monitor.Then it stopped working, and I can't make it work at all. F5 recognizes just the laptop screen.
If I connect an analog display, it is fine, and I can pass between the two screens without difficulty.
The strangest thing is that, if I reboot when the Portege R500 is docked, the digital monitor begins by displaying the boot sequence, but then the signal is lost as soon as the screen stops the display of the progress (in low resolution) bar.
I spent an hour on the phone to support Friday, and he made me nowhere.
They finished by saying that he should never have worked! So what is the DVI port because then?Any ideas?
David
Connect your monitor directly to your laptop and see if it is recognized and you can go through FN + F5 between the two views.
If it works, then connect with port replicator, and then try again.It's probably best if you reinstall display drivers. Maybe there are new too on the download page.
-
Count the hours between the times of the day
Hello
It is a timesheet, calculation of payment:
I'm trying to find a way to calculate how many hours is between two specific times of the day.
I enter a start time and an end time (in 2 different items), I calculate the number of hours that is. What I can understand.
Then I need to know how many hours is between 16:00 and 22:00.
The reason is that there is an additional extra payment for those hours.
So: "payment on time' X ' total hours work in a day ' + 'bonus' X ' hours between 16 and 22" = "total wages for a day" "»
Thank you
Enter the full date and time in columns A and B (for example ' 12 Sep 2016 8:00 AM "or you like the what ever valid date time value):
C2 = B2−A2
D2 = C2−DURATION (0, 0, 24 × MAX (TIMEVALUE "(04:00 PM)") −TIMEVALUE (A2), 0)) −DURATION (0, 0, 24 × MAX (TIMEVALUE (B2) −TIMEVALUE (' 22:00 "" "), 0))
Select cells C2 and D2, copy
Select cells C2 at the end of column D, dough
If you prefer the values in column D as decimal hours use the formula:
dur2hours (D2)
or replace the formula earlier as follows:
D2 = dur2hours (C2−DURATION (0, 0, 24 × MAX (TEMPSVAL ("04:00 PM") −TIMEVALUE (A2), 0)) −DURATION (0, 0, 24 × MAX (TIMEVALUE (B2) −TIMEVALUE (' 22:00 "" "), 0)))
-
MacBook Pro (retina, 15 inches, beginning 2013) El Capitan 10.11.3, Simple question here: I can't open FinalCut Express (4, I believe). The wheel turns for hours. How can I install/uninstall and will I lose all my old films (for the most part stored on external hard drives). Thanks for your suggestions.
You will not lose anything, but the app if you uninstall. If you decide to uninstall use this app to make sure that all the other files which depends on FCE are also deleted however I can't give you any assurance as to whether you will be able to reinstall so that it works correctly. It is a software that has not been supported for almost 5 years and there are conflicting reports as to its compatibility with OS X 10.11. Can't I test it myself.
Maybe someone else will chime in with their own experiences.
Russ
-
Sometimes the audio does not work and another day, everything is ok. What can this be? IK have an Asus laptop and I work with windows 7. The melody of the beginning when I put on my laptop is ok
Hello Ronald.
A problem are not uncommon. Something for you to try:
Let me know if this solves the problem for you.
Kind regards
BearPup
-
Given that I cannot use the product on two computers, I can disconnect from one of these two computers, for an hour or a day and log on to a computer, "third party" to use photoshop and then log in to the original computer when I'm done? I do a work one or two times a week to another place and I use the computer which is there. I already have Photoshop on my home and work computers, but I would like to sign out of one of these just for the day I'm away from my office and home and then sign in again when I'm done. I do that often.
Hi Ryan,
Yes, you can do it.
As long as creative cloud is active only two computers, it will work.
Once you have finished your work, you can disable the current computer and reconnect to the previous.
-
I try to download the 30 day trial of PS and and he says his 'download now', but it's not. There is nothing that's going on, nor is it a file in my downloads. It's been over an hour now and I tried 3 times. If anyone can help?
If you follow the 7 steps you can directly download a free trial here: Adobe CC 2015 Direct Download Links: Creative Cloud 2015 Release | ProDesignTools
If you have a problem from the download, you follow the 7 steps, or your browser does not accept cookies.
the most common problem is caused by failing to meticulously follow the steps 1, 2, and/or 3 (which adds a cookie to your system, allowing you to download the correct version of the adobe.com site).
failure to obtain this cookie translates into an error page displayed after clicking on a link on prodesigntools.com or initiates the download of an incorrect (e.g., current) version.
-
Vista goes to 50% CPU usage and connects the computer for hours after the beginning
Original title: Vista processor
Stupid Vista goes to 50% CPU usage and connects the computer for hours after the start. Cannot run anything with any request of CPU without getting bogged down and crashing. It is not windows defender, I suspend this service and the machine is ok for another 1/2 hour, them I'm up to 50% of the CPU. The idle process said Task Manager is > 90%, still indicates 50% CPU usage and the cooling fan looks like a 747 taking off. Should I just pull the machine and go for Linux, or what? Cannot run games or whatever it is, totally disgusted with vista of POS and microsoft can it Deep and do not get windows 7, it is probably worse. Is that all I can turn off to get the same performance than, say, windows 3.1? It would be preferable to the current situation. MSCKMA.
Hello
What antivirus/antispyware/security products do you have on the machine? Be one you have NEVER
on this machine, including those you have uninstalled (they leave leftovers behind which can cause
strange problems).----------------------------------------------------
Follow these steps:
Start - type this in the search box-> find COMMAND at the top and RIGHT CLICK – RUN AS ADMIN
Enter this at the command prompt - sfc/scannow
How to analyze the log file entries that the Microsoft Windows Resource Checker (SFC.exe) program
generates in Windows Vista cbs.log
http://support.Microsoft.com/kb/928228Also run CheckDisk, so we cannot exclude as much as possible of the corruption.
How to run the check disk at startup in Vista
http://www.Vistax64.com/tutorials/67612-check-disk-Chkdsk.html==========================================
After the foregoing:
How to troubleshoot a problem by performing a clean boot in Windows Vista
http://support.Microsoft.com/kb/929135
How to troubleshoot performance issues in Windows Vista
http://support.Microsoft.com/kb/950685Optimize the performance of Microsoft Windows Vista
http://support.Microsoft.com/kb/959062
To see everything that is in charge of startup - wait a few minutes with nothing to do - then right-click
Taskbar - the Task Manager process - take a look at stored by - Services - this is a quick way
reference (if you have a small box at the bottom left - show for all users, then check that).How to check and change Vista startup programs
http://www.Vistax64.com/tutorials/79612-startup-programs-enable-disable.htmlA quick check to see that load method 2 is - using MSCONFIG then put a list of
those here.
--------------------------------------------------------------------Tools that should help you:
Process Explorer - free - find out what files, key of registry and other objects processes have opened.
What DLLs they have loaded and more. This exceptionally effective utility will show you even who has
each process.
http://TechNet.Microsoft.com/en-us/Sysinternals/bb896653.aspxAutoruns - free - see what programs are configured to start automatically when you start your system
and you log in. Autoruns also shows you the full list of registry and file locations where applications can
Configure auto-start settings.
http://TechNet.Microsoft.com/en-us/sysinternals/bb963902.aspx
Process Monitor - Free - monitor the system files, registry, process, thread and DLL real-time activity.
http://TechNet.Microsoft.com/en-us/Sysinternals/bb896645.aspxThere are many excellent free tools from Sysinternals
http://TechNet.Microsoft.com/en-us/Sysinternals/default.aspx-Free - WhatsInStartUP this utility displays the list of all applications that are loaded automatically
When Windows starts. For each request, the following information is displayed: Type of startup (registry/Startup folder), Command - Line String, the product name, Version of the file, the name of the company;
Location in the registry or the file system and more. It allows you to easily disable or remove unwanted
a program that runs in your Windows startup.
http://www.NirSoft.NET/utils/what_run_in_startup.htmlThere are many excellent free tools to NirSoft
http://www.NirSoft.NET/utils/index.htmlWindow Watcher - free - do you know what is running on your computer? Maybe not. The window
Watcher says it all, reporting of any window created by running programs, if the window
is visible or not.
http://www.KarenWare.com/PowerTools/ptwinwatch.aspMany excellent free tools and an excellent newsletter at Karenware
http://www.KarenWare.com/===========================================
Vista and Windows 7 updated drivers love then here's how update the most important.
This is my generic how updates of appropriate driver:
This utility, it is easy see which versions are loaded:
-Free - DriverView utility displays the list of all device drivers currently loaded on your system.
For each driver in the list, additional useful information is displayed: load address of the driver,
Description, version, product name, company that created the driver and more.
http://www.NirSoft.NET/utils/DriverView.htmlFor drivers, visit manufacturer of emergency system and of the manufacturer of the device that are the most common.
Control Panel - device - Graphics Manager - note the brand and complete model
your video card - double - tab of the driver - write version information. Now, click on update
Driver (this can do nothing as MS is far behind the certification of drivers) - then right-click.
Uninstall - REBOOT it will refresh the driver stack.Repeat this for network - card (NIC), Wifi network, sound, mouse, and keyboard if 3rd party
with their own software and drivers and all other main drivers that you have.Now in the system manufacturer (Dell, HP, Toshiba as examples) site (in a restaurant), peripheral
Site of the manufacturer (Realtek, Intel, Nvidia, ATI, for example) and get their latest versions. (Look for
BIOS, Chipset and software updates on the site of the manufacturer of the system here.)Download - SAVE - go to where you put them - right click - RUN AD ADMIN - REBOOT after
each installation.Always check in the Device Manager - drivers tab to be sure the version you actually install
presents itself. This is because some restore drivers before the most recent is installed (sound card drivers
in particular that) so to install a driver - reboot - check that it is installed and repeat as
necessary.Repeat to the manufacturers - BTW in the DO NOT RUN THEIR SCANNER device - check
manually by model.Look at the sites of the manufacturer for drivers - and the manufacturer of the device manually.
http://pcsupport.about.com/od/driverssupport/HT/driverdlmfgr.htmHow to install a device driver in Vista Device Manager
http://www.Vistax64.com/tutorials/193584-Device-Manager-install-driver.htmlIf you update the drivers manually, then it's a good idea to disable the facilities of driver under Windows
Updates, that leaves about Windows updates but it will not install the drivers that will be generally
older and cause problems. If updates offers a new driver and then HIDE it (right click on it), then
get new manually if you wish.How to disable automatic driver Installation in Windows Vista - drivers
http://www.AddictiveTips.com/Windows-Tips/how-to-disable-automatic-driver-installation-in-Windows-Vista/
http://TechNet.Microsoft.com/en-us/library/cc730606 (WS.10) .aspx===========================================
Refer to these discussions because many more excellent advice however don't forget to check your antivirus
programs, the main drivers and BIOS update and also solve the problems with the cleanboot method
first.Problems with the overall speed of the system and performance
http://support.Microsoft.com/GP/slow_windows_performance/en-usPerformance and Maintenance Tips
http://social.answers.Microsoft.com/forums/en-us/w7performance/thread/19e5d6c3-BF07-49ac-a2fa-6718c988f125Explorer Windows stopped working
http://social.answers.Microsoft.com/forums/en-us/w7performance/thread/6ab02526-5071-4DCC-895F-d90202bad8b3Hope these helps.
Rob Brown - MS MVP - Windows Desktop Experience: Bike - Mark Twain said it right.
Maybe you are looking for
-
Hi all Update (9.2.2) my Apple TV cannot turn on my TV if I wake mode standby with the remote control. Before it was no problem and he can turn off if I tap on the sleep.
-
Anyone know what is the maximum memory for desktop H410 W7. Thank you
-
need picture of recovery for hp slate 10 3500us
I have a slate 10 hd which froze, so I turned it down and back, but it will not load past the HP logo. I can enter the recovery menu and tried to do a factory reset, but it does not help. When I search site hps, he tells me that he is there no softwa
-
Compatibility with software OR related issues
Q1.GUARANTEED OR the fact that several (based on several engines of execution) LabVIEW EXEs wun simultaneuosly ono the same Windows XP computer, without fault?If not, what are the constraints?ex.LabVIEW EXE application created with version 7.1LabVIEW
-
I tried to help a friend with a computer slow (XP, SP3). I pulled up the Task Manager and noticed a curiosity: a process that is called 'wowexec.exe' (note the space at the beginning) and apparently with no memory has been noted. I killed him but h