TimeZones West Australia. Vista/Win7 with 1 HR calendar of January 6, 2010 with the Vista OS PRE.

Similar Questions

• Can I downgrade Satellite C875-13F of Win8 to Win7 with the same license?

  I bought a Satellite C875-13F in hury with 8 to WIN, but I would go back to win7. Is this possible with the same license code?

  With greetings, Aart

  Hello

  Check out this Microsoft page to understand the downgrade right:
  http://www.Microsoft.com/OEM/en-GB/licensing/sblicensing/pages/downgrade_rights.aspx#fBid=6jf3dZU2VW0

  Windows 8 * Pro * includes downgrade rights to:
  Windows 7 Professional
  Windows Vista Business

  I think you win 8 and is NOT Pro... so you canoe downgrade... you must purchase a license for Win 7

• j6410 over wifi is detected but not settled it on Win7 with the new installation of OJJ6400_Full_13.exe

  Dear all,

  I try to install my printer all in one HP Officejet J6410 (connected to an access point) wireless to my HP Pavilion dv5-1155eg laptop running Windows 7 Professional (ENG). I am trying to install using the new "HP Officejet Full Feature Software and Driver" (OJJ6400_Full_13.exe) for the specified printer. ""

  The rest of the HP software installation succeeded it. I am able to see the web interface of the printer from my browser. In the past, before the release of this new driver I could even print wirelessly, using the base driver provided by Win7.

  What fails is the installation of the printer itself:

  I use the software to 'Add a device' the HP that successfully locates my printer wireless in the screen "found network printers." I selects the printer, press 'Next', Network Diagnostics seems to run ok and then start the installation of the printer, it is firstly says 'printer detected... ". "but she eventually fails with the message:" printer setup is not complete - click Retry to try install again... blah blah. "

  To make richer information, I use a firewall of G Data Internet Security 2010 that I followed him and I can see that it is not blocking anything. I even tried installing with the firewall disabled, anyway...

  In addition, I tested my printer with HP Network Diagnostic Utility. The utility comes with all the information correctly (network configuration, configuration of the computer, HP printer running services, found wireless).

  Any help is appreciated to make it work because it's a major drawback, as you can understand...

  Thank you in advance...

  Thanks for the reply, but that was not the solution... As I mentioned earlier, I had tried in the first place without the firewall installation.

  But, I found a good solution to the problem, and because it might be useful to others I write it here:

  After the movie with the help of HP without success, I managed to find a workaround for the problem:

  1. I uninstalled everyhting about printer software/drivers & restarted windows.
  2. I installed the begin shape everything (the file I downloaded on the site of HP), using the USB option this time and not a wireless.
  3. RESTART WINDOWS (sucks bigtime - respect for unix/linux "reboot is for material changes!")
  4. After you have installed successfully with the USB cable, I chose the option 'Configure wireless settings' Installer extracted files resulting from the file I downloaded frrm the HP site (if after installation, the installer window is closed you will need to locate the extracted in your Temp folder files or just run the file again..). Just follow the instructions of the installer.
  5. This should make the thing! REBOOT (again) and you're ready to go!
  6. (OPTIONAL) For me, the installer actually worked at the last moment, where he stuck permanently. But that was ok, because it's stuck after you set up the printer and corresponding software. After some time, the installer came out with the usual submit an evaluation form. Just ignore it, reboot and everyhting should work. At least it did for me...

  See you soon

• Help connect Dextop Remote queue (win7) with the Iphone 5 by using the client RD

  Hello

  I can connect my iphone 5 to my laptop (OS windows7) with client RD while my iphone is connected also with my laptop wifi hotspot. And I can operate my laptop with the iphone well while I'm in the laptop wifi range.

  Is it possible to control my laptop iPhone while my phone is not connected to the laptop computer wifi hotspot?

  I use 3 G internet in my phone so I get out of the House.

  Hello Sanjidreza,

  Thanks for posting your query in Microsoft Community Forum.

  The issue you mentioned could better answer the support of Apple iPhone. According to your description of the problem, you are able to connect and control Windows 7 computer using iPhone whose parameters are in the iPhone, so you don't have to get in touch with the support of Apple iPhone.

  https://www.Apple.com/ca/support/iPhone/

• With the help of pre-build action to display the svn version number

  Hi people.

  I was thinking about using a pre build action to display the current number of svn on the front panel. I have a vi that can get the current number of svn. However, the problem is how to establish links with the application. Is there a way that before the generation can provide the data to the executable file, or what I have to write to a file and then the executable read each time it starts.

  Thank you

  Select this option.

  
  

• With the help of pre with Airrave

  My Airrave finally synchronized after 5 hours (wow). I jumped and turned on my phone and started testing. If I make a phone call, my phone will be ranging between 3 to 5 bars. I called a friend, walked around the House and she reported 2 or 3 times that I cut out, for a second, there was a noise of static electricity, and then I came home. Aside from that, she said I was fine. The strange thing is, it remains pretty solid 5 bar with EV unless I actually make a call.

  Data are another story. Sitting right next to the Airrave, it shows EV and quite well if I walk so. If I start using the data, however, it is really strange. It will show EV and full signal, and then if I try to use YouTube, it will reduce my service of 5 bars 3. Then it will start to potentially load a video, but when he tries, it does not load anything, and if I reduce to map view, it shows that I'm in 1 X, instead of EV.

  I just tried to go back on Youtube just now again, and it took more than 20 seconds to load just the main screen with the most popular videos on this subject. He showed EV and a full service and then during this loading, EV light flashed, all my service bars disappeared and then reappear, then the loaded zone. When I click on a real video, video is coming, then the spinning grey circle. He sits there for a while and when I put them to the top of the map display, it shows 1 X with full service and the video never loads.

  So yes, it is not so great.  I'll call Airrave tech support tomorrow and see if they say anything.  If I can't solve this problem in 30 days and these battery problems are not resolved (and I don't know if my battery is at fault, or I have a defective phone) I will return the Pre and ask if I can just get a Blackberry or something.  This is getting ridiculous.

  "Support made AIRAVE Sprint Mobile Broadband (EVDO)? ."

  AIRAVE does not support data speeds Sprint Mobile Broadband (EVDO).

  Your mobile device will continue to receive Sprint Mobile Broadband (EVDO)

  services directly from the Sprint network in the country while in the sector of the

  AIRAVE. »

  page 4 - http://www.nextel.com/assets/pdfs/en/services/sprint_airave_faqs.pdf

• How to convert dvd win7 with the ISO on my office installation files so that I can again use the iso file to make an installation key bootable win for my net book which has no dvd player.

  I bought a proffessional win7 genuine dvd of microsoft I received today. the dvd has no iso file but only installation files. I need to install win 7 on my dell inspiron mini 1018 10 net accounting that only has usb ports and no dvd support. So I want to use a microsoft tool (if it is possible to avoid 3rd party tools) and firstly convert the files in the bootable dvd into an iso file on my desktop which has the dvd player. so I want to use the iso file and use the windows download dvd tool from microsoft to make a bootable USB key and use it to install win 7 on my netbook usb ports. I need urgent links to the microsoft tool if it is available or any reliable free tool to convert DVDs to iso. Help, please

  You can use iSO recorder:

  ISO Recorder v3

• save data LabVIEW2010 in Excel (Win7) with the xlsx format

  Hi all

  
  

• problems with the graphics card after installing windows 7, code 43

  I installed windows 7 & my ATI-RADEON XPRESS 200 SERIES is stopped by windows 43.It code stipulates that drivers are ok... but it is not recognized... I also downloaded a few 3d Screensavers & they worked very well now, it is not able to open the screensaver because of the video card or to be compatible with Direct 3D... This question has not pop up until after you have installed windows 7, I have checked & found a lot of problems with windows 7 & ATI-RADEON XPRESS 200 SERIES drivers or recognition. Tried to update the driver but the States, it is far, but windows 7 is having a problem with drivers... Y at - it a fix for this, looks like it should be a matter of windows & microsoft should have action corrected problem because windows is caused this problem... Have installed all windows updates & all up to date... Can someone try to give me a solution to fix this problem? Not sure if they have an upgrade or accelerator program 3d graphics that may have to be installed... & again thanks if anyone can help... Have a great day...

  ATI-RADEON XPRESS 200 SERIES is an accelerator of limited DirectX 9 graphics (integrated graphics), which was

  published in ' 07 and apparently is not compatible with Win7.

  Old hardware with a Windows version compatibility isn't something that never gets fixed by SM.

  It is the mfg of the material to support the product through a driver updated, and trend of integrated graphic card

  not be supported as long as a dedicated graphics card.

  In this case support drivers apparently stopped with Vista.

  If you try to get drivers via Device Manager or Windows Update they can provide incorrect information

  What about drivers who are up to date.

  These two methods are a little known does not install the proper drivers for the graphics.

  I read that some people have had luck on Win7 with the Vista drivers for various materials. Doesn't hurt to try.

  You can download the drivers for XPRESS 200 SERIES from the AMD website below-

  http://support.AMD.com/en-us/download

  .

• I have a problem with the password admin on XP/SPe

  When the computer that I use now was bought a few years ago for my husband, he created an administrator with a password account. He did not have a password reset disk that I can find (he died a few years ago) and its index for the password means nothing to me. I know that I can reinstall the sys op but who loses a lot of put the info that I don't know and would not be able to restore.

  I guess I have two questions:

  1. is it possible, other than of the reinstall, to pass the admin password so that I can connect to the admin account?

  2. If I export my settings to transfer them to my new computer Win7, with the admin password transfer to the new system?

  Unfortunately, the only way to change the password for the admin on a computer is with specialized programs that are generally not available. If someone you know IT, they are able to help you.

  Are you using another user account and just have not tried the admin account in the last couple years?

• Compare a date with the date system

  Hello

  I use the script (that I found in this forum) in below in order to obtain a date of datefield1, add a year and give the date of datefield2.

  It works very well.

  Kai var = util.scand ("yyyy-mm-dd", this.rawValue);
  var sFullYear = oDate.getFullYear ();
  var sMonth = oDate.getMonth ();
  sDate var = oDate.getDate ();
  Datefield2.FormattedValue = util.printd ("JJ", new Date ((sFullYear+1), sMonth, sDate));
  Datefield2.RawValue = Datefield2.formattedvalue;

  But now I would compare the new date (David [added a year]) with the date current system (cDate).

  Does anyone have an idea how to compare dates? The result should change color as below.

  If (David < cDate) {}
  Datefield2.fontcolor = "255,0,0";
  }

  Thank you very much.

  Kind regards

  ra_be

  Try to use the Date of Javascript object:

  var myDate = new Date();
  myDate.setFullYear (2010,0,14);
  var today = new Date();

  If (myDate > today)
  {
  Alert ("the date is before January 14, 2010");
  }
  on the other
  {
  Alert ("today, it is after January 14, 2010");
  }

  If this does not work, try the analysis on the month, day and year, and then do a comparison on all of them (without forgetting to convert strings of months an integer. For example if you store the release date: February 2, 2009, February goes to 2).

  Then your comparison would look like:

  if(myYear == sysYear) {}

  if(myMonth == sysMonth) {}

  if(myDay == sysDay) {}

  days are equal

  }

  Else if (myDay<>

  myDay is before sysDay
  }

  else {}

  myDay is after sysDay

  }

  }

  }

  essentially to follow this same logic for comparisons of month and year and it should work as well.  It would be certainly cleaner and much easier using this Date however (http://www.w3schools.com/jsref/jsref_obj_date.asp)

• Satellite Pro P200 - 1KE Vista loses contact with the second internal HARD drive

  Vista Business SP2. I have a Satellite Pro P200-1KE, with two 160 GB drives: a Hitachi configured as C: (operating system, programs, etc.) and E: (data, other programs). The second is a Toshiba MK1637GSX. This little about it and nothing of any importance and is normally configured as d. Unfortunately this hard drive has now become invisible to Vista, although it is still recognized by BIOS and Device Manager. In managing computer does not appear in the list in the upper pane, it comes without a letter from reader below. I have tried everything I know to get recognized, including the following:
  (In no particular order):

  * Remove computer - managed, reset as a single Volume: it always fails
  * Reformat to NTFS using Linux GParted or utility disk Linux (via a USB stick with Linux ice Peppermint on that nerd), sometimes combined with the restoration of the system - it works, but only for a single session. She always disappears again when you restart
  * Remove the driver from Device Manager and pointing plug-and-play with Windows System 32 and Windows Update - which seems to return the driver - but does not recognized disk, unfortunately
  * Meanwhile, throughout all this, Vista insists on finding a driver for "unknown device" that she sometimes found and (allegedly) installs and sometimes find one fails to install.

  Bah!

  Anyone know anything else I can try - preferably without having to reinstall the entire operating system, or run the risk of using Toshiba Hardware Setup that does not seem to come with all the instructions and enigmatic, who wonder if I want to delete stuff 'selected', without showing me what kind of things I am alleged to have selected for removal!

  Best
  David

  If this second HDD is not so important to try to start the original installation disk Microsoft (Vista or Win7) to see if the second HDD will be recognized for the installation procedure.
  You can also try to install Win7 on this second HDD to see if the installation is correctly finalized. Later, you can check if you can start the second HARD drive preinstalled OS.

  Test just to see if this problem is related to Vista only.

• I have two vista windows oem sctatch disk at home. You can download it for me, these two are with the product key to the House.

  I have two vista windows oem sctatch disk at home. You can download it for me, these two are with the product key to the House.
  It is upgraded, the other is an integer telling Windows Vista;
  and the little hard up and down, mouse from left to right,.
  or can you please sent a copy of a disc to my address, this is the right path for fixed my windows vista online.
  (try to contact technical support of the direct Vista operating system)
  How about upgrading to windows 7? Give me the vista on 'the base drive OEM' continues for facilities?
  ----------------

  Replacement OEM or software support of system manufacturer in most cases, you must contact the OEM (OEM) manufacturer or the manufacturer of the system directly to replace Microsoft software that was distributed by your computer. However, an exception is made for operating system service pack media *, for which you can contact us directly.

  • Contact information for the manufacturer of the computer, see the Microsoft Web site at the following address:
    http://support.Microsoft.com/default.aspx?pr=oemphone (http://support.microsoft.com/default.aspx?pr=oemphone)
  • If the product has been distributed by an OEM or a system integrator, the product ID contains the letters "OEM". Visit the Microsoft Web site at the following address, select the appropriate product family, and then follow the steps to find the product ID:
    http://support.Microsoft.com/default.aspx?PR=notsureoem (http://support.microsoft.com/default.aspx?pr=notsureoem)
  • For OEM software, the certificate of authenticity (COA) lists the name of the manufacturer of the computer under the software version name. For more information on the certificate of authenticity, see the Microsoft Web site at the following address:
    http://www.Microsoft.com/resources/howtotell/ww/FAQ.mspx#1 (http://www.microsoft.com/resources/howtotell/ww/faq.mspx#1)

    If you have System Builder software, the COA lists "OEM software" or "OEM product" under the software version name.

  * Note Service pack support only includes what is associated with the service pack itself.

  More information: http://support.microsoft.com/kb/326246

  Regarding Windows 7 - frequently asked questions - Upgrade Options
  http://www.Microsoft.com/Australia/Windows/buy/offers/upgrade-FAQ.aspx TaurArian [MVP] 2005-2010 - Update Services

• Win7 with FF 31, smart phone 4.2 with FF letest ver. using the same account with 1 email. But the phone is not getting any collar, Bokmr, etc.

  Brother.
  We use win7 with Mozila 31, 4.2 with Mozila Android smart phone latest google app store on 04/10/0214. Using the same account with the same email. But the phone does not get any new information of win7 with Mozila 31. PL z give useful information.

  Hi w3ur_team,
  Thank you for your question. I understand that there are two features that are documented in the sync account. However the Android is not synchronized.

  There are two places we can check:

  1. In the Android settings, under accounts is the Firefox Sync or Firefox Sync (discouraged) joint account?
  2. Credentials work on accounts.firefox.com on the mobile device and are there any error messages in the synchronization of the settings menu > sync?

  See also Firefox Sync troubleshooting and tips for more troubleshooting steps.

• Geolocation has stopped working in Firefox 24 after update (Win7 64). Downgraded to FF 23.0.1 solved the problem. Even with the other installation of FF to another PC.

  Visit this page: https://developers.google.com/maps/documentation/javascript/examples/map-geolocation or any other website using geolocation to track my location shows a blank map and no prompt "share location: allow, block, not now."

  This has happened since upgrading to FF 24 (Office Win7 64). Decommissioning of FF 23.0.1, solves the problem: FF before 24 supports geolocation without problem. Tried in my desktop and laptop with separate FF, using different plugins installations.

  Thank you in advance.

  [NOTE: now using Firefox 23.0.1, the problem does occur only after upgrading to Firefox 24]

  Uninstalling Firefox completely from my laptop and install it again, solved the problem.

  I have not yet tried with my office.

  The laptop uses whereas the ethernet office wifi. The problem exists in the installation of the laptop FF 24 too, so I don't think it was the root of the problem, at least in my case.