Title/Action safe areas

Similar Questions

• Title and Action Safe areas?

  1. where is the option to activate these 5.5?

  2 would you use for a project intended for webcasting? Is it necessary for video on the web?

  Thank you.

  .. .and they are activated by an icon under each monitor

• Is there a way to hide/show the title safe area in Illustrator?

  Is there a way to hide/show the title safe area in Illustrator?

  I know that I can turn on or off by using the options of work plan, but to facilitate the workflow, I wish I could spend it power I can do using the "Cmd:" for guides?

  I know I can show/hide video leaders and I it was mapped as shortcut... but could not find a way to do the same thing with title/action safe?

  Any ideas would be appreciated?

  I am completely new to scripting, so it took a bit of trial and error, but here is one that will turn on and off for all work plans:

  for (i = 0; i

  If (app.activeDocument.artboards [i] .showSafeAreas == true) {}

  app.activeDocument.artboards [i] .showSafeAreas = false

  }

  else {}

  app.activeDocument.artboards [i] .showSafeAreas = true

  }

  }

• How to hide the title safe area?

  HI - q Quick - I created a project in cs5 with the new video settings - how hide security title/action guides?

  Hello

  The toolbar should say "work plan" - after the input box marked: name, there are a few small icons, the second to the long said 'Display Options' If you go over it. Hidden under this icon are options to display and hide the various aspects of the video grid if I am mistaken in understanding what you ask for.

• I'm trying to schedule a task, but when I open the buttons/tabs 'Action' & 'View' are missing.

  I'm trying to schedule a task, but when I open the buttons/tabs 'Action' & 'View' are missing. I tried just clicking around to see if the options menus/come to bring back the buttons/tabs or change the display to do this. But nada. Could you please help? Thank you

  Puzzled.

  Original title: Task Scheduler

  I solved it in fact reading the complete list of the options when I right click at the top of the window.

• Apple need to change the title of we are here in support we are here to listen to

  Apple need to change the title of we are here in support we are here to listen to

  Say to Apple.

  https://www.Apple.com/support/feedback/

• avoid to perform actions that are in the presentation at the beginning of the workflow layer

  Hi all

  Is it possible to perform NO actions, that are defined on the presentation layer, at the start of a workflow?

  On our supply workflow contains a step where we select the cluster to build the virtual machine. Once all the other objects required has been selected will be calculated automatically.

  This means that in the next drop you now get a list of all the hosts that are members of the selected group. We do the same thing with the networking and all data warehouses that we use for a virtual machine.

  All actions are mainly related to the 'list of preset of elements', "Data Binding" and "Default"

  The problem is that when I start the workflow I have, of course, a lot of error messages in the log file because I did not choose a cluster at this stage. Also it takes a while until the presentation layer will be shown.

  Can I do to avoid actions that are related to the presentation of the workflow? And make them run when I chose a cluster object?

  Thank you very much!

  The best practice is that the first line of your action must be one if (cluster == null) return null;

  This will speed up the presentation a lot.

  Another more complex way is to use a disclosure ognl expression, but they are difficult to maintain and may not give any gain on the action and returns null.

• Titles tab favicons are confused and do not stick to accurate data - how to solve?

  Since a few days now FF does not display the favicon and the titles of the tabs properly more. (see below for screencast)

  • Instead, a few 'standard' - sites appear in the tab titles and favicons:

   - google
   - wikipedia
   - get involved (firefox)
    - Firefox central
  

  • as soon as I activate a tab, it's favicon and symbol is updated immediately.
  • most favicons updateto their correct data, as soon as he gets in the background, it is erroneous data.
  • all titles to date for its correct title once activated. But againfalls at the time where to start at bottom.
  • in some tabs the favicon disappears completely during activation (including the placeholder for the icon)
  • also in mode 'tabs to group' securities favicons are not valid. Ironically, just most of them (some favicons are correct) - which makes it more difficult for me to understand.
  • in the group-tabs-view some of the tabs pins/apps favicons simply lack.

  empty the cache, cookies, offline, restart FF data, restart the machine did not help so far.

  As much as I love my history and profile of the data, I don't want to do new FF-profiles.

  I have not changed the configuration of AddOns in recent weeks, but off Sync a few days ago (because Sync messed up my favorites completely - as described here https://support.mozilla.org/en-US/questions/1023070 )

  Video of screencast:
  https://Flic.KR/p/qMVf2p
  can add screenshots, if necessary. But the video shows better behaviour in my eyes.

  It looks like it is caused by an add-on (which you have many, a recent update of either of these modules could be the cause). Have you tried to test in a profile of costs? Use the Profile Manager to create and delete profiles Firefox

• Even with AV software, how safe are passwords in T-bird, worried?

  With the threat of the Zeus botnet and even with the AV software and vigilance for the phishing emails, how can secure passwords in TB you, if even a master password is effective only for a single session?
  Surely, TB is not safe in itself against such an attack.
  Comments please, Steve.

  Point 1. If they cannot follow, they have a problem.
  Thunderbird 17 November 20, 2012
  Thunderbird 24 September 17, 2013
  Thunderbird 31 later in 2014

  I hope they can keep up with new versions of the virus, because Thunderbird is almost up to once a year.

  Point 2. Thunderbird stores your e-mails on your hard disk in plain text format.

  Point 3. Zeus is dead. http://www.USATODAY.com/story/news/nation/2014/06/02/global-cyber-fraud/9863977/

  Point 4. Nothing will protect you against malware. Nothing less than your computing device to disconnect from the internet, all networks and all media. That's put the machine in a glass bubble. Anything that can be done is reduce the risk, not remove it. A few years ago new USB keys have been sold at retail by malware on them. How do you want to know, how would your anti virus program know, if it was the first appearance of such.

  Point 5. Your data can be encrypted, there are a lot of account and there entire disk encryption products, but the data useless even to you in this State. So when you connect to your computer data is decrypted, so you can use it. Crypto locker or as happens and encrypts your data. When you disconnect from your operating system with renew your already inaccessible encrypted data encryption.

  Point 6. «Please do not use the term good AV software.» Famous, yes but nothing anti virus programs we have are good. They rely on questionable heuristic engines lists value and the search for known viruses. Some of them have not been seen in the wild for 30 years and daily updates. In some cases more frequent to broadcast their new definitions to the infections.

  Point 6. Thunderbird is written with security in mind. So, no support for remote images by default, no vbScript, javascript code and not Flash. All the HTML is analyzed and disinfected before reaching even to see. So the risk of read any mail is very very low. I'm sure that there is an unknown exploit here somewhere, but the 6 weekly releases of security and stability Gets the most serious closed in due course.

  Point 7. Most anti programs anti-virus analyzes the flow of data, whether HTTP for the web, IMAP or POP for mail, so if your anti virus program does not only and requires some sort of program plugin, maybe you need the other.

  Point 8. The biggest risk is the spare part, because they are sent as they were sent. However, to open an attachment, it must first be re-created as a file and saved in your temp folder and then executed in the same way that if you double click on a file on your desktop. If your antivirus can't find out and stop a problem either through the writing of the file, or it is later opening will be useless for this threat in any case. For what is does or does not email is irrelevant.

  Point 9. I have the challenge of security on why companies e-mail Scanner even exist, the best I can get from them is "another line of defense." It's true, they are aware because their scanners residents should detect anything that arrives in the mail, the email stuff is just "another line of defense' very annoying which causes most of the problems of electronic mail. Regarding outgoing mail, that was really me. They certify your machine clean and then scan outgoing mail for, I have no idea what. Your machine is clean.

• Safe area of the Vibe P1

  I had spent in the security zone in order to implement but left. Now when I open the safe zone, it is asking password. But ibdid not give any password in the first place. Now how to recover the password or get the password

  For security reasons, we do not allow the user to remove it without password.
  You need to do factory reset to reuse the secure area.

• Apex 5, call a modal page, set page elements, in values referenced title page elements are not the same (correct) than the item itself

  Hello

  Apex 5.

  IR (departments) on page 2 I want to open a modal page 3 (classic report) with the detail data (from emp) for a Masters depno via a link on depno column.
  In Page 3, I created two elements P3_DEPNO and P3_DNAME. These elements are defined in modal page 3 of page 2.
  When I do these two visible elements on page 3 I can see, the values are set correct according to the value in column (depno) link on page 2.
  However, I would like to place these element values in the page title of page 3
  Title: PGE for DepNo: & P3_DEPNO., DepName: & P3_DNAME.

  It happens that the values mentioned in the title of the page are not the same (good) as in the items himself.
  Initially, they are NULL. Only when I refresh page 2 the values change but remain the same (last called depno) as long as I'm doing a new refresh of page 2.

  I wonder how I can run to display the values of the correct point in the title of the page corresponding to the values of the correct page element (that I have hidden).

  Y at - it something more to do, or it could be a small bug?

  I've created a little demo app on
  https://Apex.Oracle.com/pls/Apex/f?p=75955:2

  WS: AMLWS001

  Demo/demo (developer is)

  Please see the report 1.

  Thank you in advance!

  André

  Hi andremi,

  andreml wrote:

  Hello

  Apex 5.

  IR (departments) on page 2 I want to open a modal page 3 (classic report) with the detail data (from emp) for a Masters depno via a link on depno column.
  In Page 3, I created two elements P3_DEPNO and P3_DNAME. These elements are defined in modal page 3 of page 2.
  When I do these two visible elements on page 3 I can see, the values are set correct according to the value in column (depno) link on page 2.
  However, I would like to place these element values in the page title of page 3
  Title: PGE for DepNo: & P3_DEPNO, DepName: & P3_DNAME.

  It happens that the values mentioned in the title of the page are not the same (good) as in the items himself.
  Initially, they are NULL. Only when I refresh page 2 the values change but remain the same (last called depno) as long as I'm doing a new refresh of page 2.

  I wonder how I can make it work to display the values of the correct point in the title of the page corresponding to the values point right page (what I have hidden).

  Y at - it something more to do, or it could be a small bug?

  Page title is rendered before the page elements, that is why is not highlighted in your title.

  I don't think directly, we can use the page as a page element value.

  Creates a copy of yours and made the change it new App id - 45390

  There, I created a static area without a model before your report area and put your article into that.

  then displayed title PGE for DepNo: & P3_DEPNO, DepName: & P3_DNAME. for the area of your report.

  Kind regards

  Jitendra

• How safe are the latest CC? (2015.3 HAVE broken plugins)

  I've already discovered that HAVE 2015.3 breaks clever plugins and you will need to back up and reinstall the plugins just to aid the operation. A warning would have been better.

  Before installing any of these "minor" improvements, I would like to know if they will affect other plug-ins.

  These are dot-release updates and cannot be installed next to an existing version as an upgrade complete, so that they cannot be put to the test.

  If they are going to affect the plugins I don't think that Adobe is currently at all the Manager to release this way. If they are a full upgrade, rather than a point-release so this is how they should be released.

  Dv8kiwi you have posted in the forum creative cloud download & install.  If you have any questions about the behavior of plug-in and compatibility, I would recommend posting in the forum there is, to this software title.  You can find a list of available forums at https://forums.adobe.com/welcome .

• Why my actions keep deleted? When I open Photoshop save the only actions that are there are my first I watched with little action and duplicates of them each time.

  I have adobe Photoshop CS6 and whenever it stops when I go to open the program again my actions aren't there. The only ones they are on my original actions that I started with. These actions are also doubled. I have three of them, and I have to go and delete them every time. But I have many more shares that I used to have in Photoshop and they are is no longer there. I have to keep their reopening every time. Someone know why she would do that because it's very frustrating when I go to edit photos and I need to get my actions again, and then open them upward.

  Maybe a permissions issue, see this link for general troubleshooting techniques for Photoshop:

  t http://blogs.Adobe.com/Crawlspace/2012/07/Photoshop-basic-troubleshooting-steps-to-fix-MOS - issues.html

• 'Safe area' apply to flat screens?

  Hi, can someone tell me the significance of the "Security Zone" today (e.g. denoted by the rectangles on the screen when adding titles)? When viewing videos on screen flat 16:9, are details of the inner rectangle may be lost, or is - this only likely when viewers forget set the correct proportions? Was 'Security area' more relevant when he looks at an old TV older than flat screens LCD/LED of today? Should the essential details on flat screens, I wonder about the outer rectangle rather than internal when adding titles to display on flat screens? I'll put together a slide show of old family photos and enough Interior narrowing of frame to add titles in the black under the photos so that the names can be read more quickly than if superimposed. I like the chic look of gold inscription on a black background under the old black and white photos. When the heads are near the top of the frame in the photos, images must be narrowed a bit more maybe desirable adjustment lettering under the photos in the inner rectangle when titles are added. The photos may not be so shrunk if it is OK to insert all in the outer rectangle for the flat-screen display.

  With the help of PE10, Windows 7 64 bit, 377ok i7, 16 GB RAM, Geforce GTX 650, ASUS 21 inch 16:9 LED screen.

  sheltiefriend

  Have you seen this article online on Overscan?

  http://en.Wikipedia.org/wiki/overscan

  RTA

• Using "Keylines" to help make the titles broadcast safe in Premiere Pro

  Hello

  I use the following great link provided by Bill Hunt to help make downrezzed to look reasonably good SD HD titles.

  http://library.CreativeCOW.NET/articles/hodgetts_philip/titles.php

  I have a question about the screenshot below, taken from the link above:

  

  I understand the notion of "keylines" here, but I'm not sure how to make that happen within my title options menu.

  Does have another name in Premiere Pro?  My search for "keylines" in the Help menu has been in vain.
  
  In addition, in this context, the "80-204/204/204" numbers mean mean?

  Thank you!

  Matt

  No, probably just outside. They are useful here, while the Interior would be just if you need a specific look.

  The numbers, by the way, are the RGB values.