Apple need to change the title of we are here in support we are here to listen to

Similar Questions

• Change the title bar

  Can I change the title bar, to record a few additional items in the title bar?

  I need to change the title bar and want to add the search box, basically a text of the entry, and the Cancel button. Y at - it a special component available in the SDK of AIR BB10 or I have to create a custom?

  No, not directly. You will be able to extend, add your new items and replace the updateDisplayList to organize what they way you want.

  Alternatively, you can add your items to the display list at the same level as the title bar and in the container owner, position new items 'above' the title bar. Just make sure that you add the new children after the title bar.

• Change the title associated with my site which is displayed in the results of the research

  I need to change the title of my search results so that it indicates the name of my company. At present it is a draw of names of products and that is that displayed my title when I search in Google, Safari, etc.. I was able to change the title of the Page according to the properties of the Page, but I can't understand how to change the title that appears when I search for my company's website. I've attached an example I found online and circled what I have to change in the event that someone does not understand what I'm talking about.

  

  It is something that is determined by the time when the Google bots crawl your site again to gather fresh information. It can take days or weeks or longer. You try to add your pages with updates here, if that helps: https://www.google.com/webmasters/tools/submit-url?continue=/addurl&pli=1

  See you soon,.

  Vikas

• Impossible to change the title of the document when the browser is opened in mode of dialogue

  Hello experts,
  
  I'm working on a solution that is to open another .jspx dialog page. I need to change the title of the browser dialog window dynamically when the user performs a specific action on the page of the dialog box.
  
  Unfortunately, I can't get this to work. I tried to use JavaScript and not had much luck. I tested this technique on a dialogue page and it works fine. Help, please.
  
  Here's the markup code for the launch of the dialogue page:
  < af:activeCommandToolbarButton id = "actbPreview".
  Icon="/graphics/previewscreen_enabled.gif ';
  Text = "Preview".
  action = "dialogue: weCreate.
  useWindow = 'true '.
  windowHeight = "620".
  windowWidth = "1120".
  Disabled = ' #{empty links. " MapElemUnqId.inputValue}.
  launchListener = "#{backing_weQuery.launchPreviewerListener} '"
  Binding = "#{backing_weQuery.actbPreview} '"
  returnListener = "#{backing_weQuery.returnPreviewerListener} '"
  clientComponent = 'true '.
  windowModalityType = "applicationModal.
  windowEmbedStyle = 'window '.
  disabledIcon="/graphics/previewscreen_disabled.gif";/ >
  
  On the dialog page, here is the markup and javascript to set the title of the browser window:
  < af:commandButton text = "title" id = "cb10" >
  < af:clientListener = "setWindowTitle" method
  type = 'action' / >
  < / af:commandButton >
  
  function setWindowTitle (actionEvent)
  {
  actionEvent.cancel ();
  var doc = AdfPage.PAGE.findComponent ("d1");
  doc.setTitle ("TEST");
  Alert ("title =" + doc.getTitle ());
  }

  I could see a possibility, the document could be in an iframe, try to check the generated HTML structure. If so, try to go to the top of the DOM of the document root tree of the popup and set the title on that one instead.

  Kind regards

  ~ simon

• How to change the title of the report dynamically?

  Hello
  I need to change the title of the report dynamically. The title of the report must contain the value of a particular column in the report.
  
  ex:
  col1 - col2
  ----------------
  123 - abcd
  
  Title of the report should be report123
  
  Thank you

  According to the title, simply specify Report@1. That should do it. Another way would be to add the text Report@1 (add a space between the @1 and report if you wish) in the view of the narration and move it to the top. @1 means Column1.

  Thank you!

• How can I change the title of the folder?

  Im trying to organize my notes and consolidate a bit, but I need different titles. I can't change the title even with edit. Also, is it possible to pass information from one folder to another?

  To change the title of the file, switch to the folder view (who has the list of places, your notes are kept: all iCloud, Notes, file, folder, deleted recently) and press the button change. While in editing, tap the folder you want to change the name to once and it will display a window where you can change it.

  You can move the notes of any place anywhere. Switch to the folder view and click the folder you want to move the notes of. Click on edit, select the notes that you want to move, click on move and then select the folder you want to move.

  See you soon,.

  GB

• Change the title of a PDF copied in iBooks.

  iPad ios 9.3.5

  When I receive a PDF file in mail and copy in iBooks, I can't permanently change the title of the document.  If I try to rename it, when I close and reopen the iBook, the title always comes back to the original.

  What do you mean when you say that you "close" iBooks? I just figured out how to rename files iBooks, and so far the name stuck after an hour of passing around one application to another.

  The I'm renaming of files is to go to the library list, choose the command selection (no need to select your document), then tap the name of the document for a few seconds until that a cursor appears.

• Change the title of the album

  Just to ask if anyone is still struggling to change the title of an album bought on iTunes. A year ago, I myself remember that, although it seemed that iTunes would allow me to change the title, a few days later, it was renamed to its original name.

  Thank you!

  When you ask this kind of question, it is useful to state if you use iCloud services and if the album was bought at Apple...

• Change the title of the film

  Since the upgrade to iTunes 12.4, which occurred automatically when I upgraded to El Capitan, a move, I regret a hundred times a day. I find that I can't edit the title and other information of movies (corporate videos that I use to show potential customers). It was SO easy on the previous version of iTunes but I can't figure out how to do on this version. These movies are saved on my iPad, and when my iPad is connected to my MacBook Pro and I click on the movies under iPad Summary tab - settings, I can't do a right click on the movie to bring up the information (that I could in previous iTunes). If I click on the movies tab slot on my device and make a list of movies, right click on a title, then right click on read the information, the title of the film is gray and I can't change it.

  Does anyone have any suggestions on how to solve this problem, other that go back to a PC and tell Apple where they can put their crappy OS system!

  Thank you. :-)

  If these videos are synchronized on the iPad from iTunes or the Photos app, change the title in these applications, not in the display on my device, and then synchronize again.

• Multi-window Interface operator - change the title of the execution window

  Hello

  I use the operator interface multi-window, obtained from: http://zone.ni.com/devzone/cda/epd/p/id/6372

  I would like to change the title displayed in the windows of the execution to show the test socket number and serial number of the UUT that I am running 6 DUT in the batch process model and it is not obvious from the current title which execution window belongs to which object to measure.  The current title shows: TestStand operator Interface - [Test DUT - Test taken point of entry - SequenceName.seq [#]]

  where # 3 to 8.

  Anyone have any suggestions on how to do it?

  Thank you!

  Notice that I use the UI platforms instead of operators TestStand interfaces because I want are tiled windows execution displayed for each test sockets, and the OIs TestStand don't do that.

  Hi George Mah.

  To change the operator interface, you will need to modify the source code, which is written in c#. To change it, open the solution in Visual Studio and open the MainForm and follow the instructions on the image below:

  

  When you double-click on the "UIMessageEvent" you will have the code for it. In the code, you will need to add a new case to handle the changes you want to make. Here's the code you can use:

  case UIMessageCodes.UIMsg_ModelState_Identified: // This message fires after the serial numbers are entered
                      foreach (Execution value in axApplicationMgr.Executions) // This allows for every socket to be updated
                      {
                          if (value.ForegroundThread.GetSequenceContext(0, out frameId).Root.AsPropertyObject().Exists("Parameters.TestSocket.UUT.SerialNumber",0)) // Checkto see if the serial number exists
                         {
                          FindForm(value).Text = "Index Number: " + value.ForegroundThread.GetSequenceContext(0, out frameId).AsPropertyObject().GetValNumber("RunState.TestSockets.myIndex", 0).ToString() + "      Serial Number: " + value.ForegroundThread.GetSequenceContext(0, out frameId).AsPropertyObject().GetValString("Runstate.root.Parameters.TestSocket.UUT.SerialNumber", 0); // Here are the paths through the teststand API to get to the information.
                         }
                      }
                      break;
  

  This should take care of it. I hope this helps.

  Kind regards

  Perry S.

• Need to change the scale to the default scale my resolution, but the ok button is not visible

  Original title: DPI scaling

  Need to change the scale to the default scale my resolution, but the ok button is not visible

  This help,

  http://answers.Microsoft.com/en-us/Windows/Forum/windows_vista-desktop/want-to-return-DPI-scaling-to-original-96-DPI-but/bd160079-c1e1-47F8-9727-2bc22892dfe0

• How do you determine the steps to use when they need to change the info in the diaglog box "WINDOWS SECURITY" of win 7, which asks the user and the password?

  My background: I can only see this dialog box titled WINDOWS SECURITY when I want to access my log to router with my office router connection. The dialog box refers specifically to my router, and asking a user and a password.

  A long time ago that I asked to remember and, of course, I forgot it and the location that I wrote. Now I am unable to determine what I thought, would be a simple reset and the steps that allow me to perform a reset. After a series of search phrases on Bing, and in the community of the SP as well as Win 7 Pocket administrator index I can't find the steps because the dialog box, it seems with the title of the WINDOWS SECURITY is too general.

  I need to install a new router and need to change the user and password. I don't know if user and password are unique to the company of router or Microsoft Win 7. Nevertheless, I can reset thinking them they are unique to me and Microsoft because there is no query such as, "you forgot your password?', whereby get you a temporary.  These steps are already stationed in the community and I just can't get into the research phase right? (What is related to IE 11?) Thank you.

  > I need to install a new router and need to change the user and password.

  Do you want to connect to your old router?  If Yes, most routers have built-in switch you tripping with a paper clip or similar to force a reset to the factory settings.  You can then access the default connection.

  If it's the new router, it should be accessible with the factory default login. If you don't know please post that make the exact and the model of the router.

• Changing the titles of disk in the library WMP and my folder of music at the same time...?

  Is it possible to sync my music folder (where all my music is stored on my PC) with the WMP library for that when I change that it will automatically update the other.  For example: I tear a disc with WMP;  The disc is saved in my music folder in a subfolder called "Disc One" he also appeared in the WMP library as "A drive" However, if I change the title or follow on one or the other, the change is not made in both places.  It drives me crazy because I do editing even twice.  I don't know if there is something wrong with my setup or if it just can't be done.    Any ideas?  Thank you.

  It should not be a problem with the addition of WMA lossless data... If your rip settings and parameters of the library are correct, any information you enter must apply in all (although you may need to change the name of file separately - always do to the location of the file and not in the library 'explorer').

  I would like to know if the problem persists and we will check things through. -Cheers - Ric

• Need to change the properties of the Clipboard or increase the number of characters that can move from one program to another

  Original title: Clipboard

  Hello

  I use a software and I have the problem with the paper, I need to change the properties of the Clipboard or to increase the number of characters that can pass from one program to another

  where can find Clipboard in windows 7 and how can I change properties?

  There is no user-oriented Clipboard option.

  For 32-bit applications, the Clipboard can allocate blocks up to 2 GB in size or to a maximum of the amount of virtual memory in the PC has, is the least. The Windows Clipboard does not impose any other size limits.

• Unable to play the video due to the incompatible program and need to change the resolution

  Hi, I just bought BBC Get Active in French.  I live in France and I have Windows 8.1.  Video on this CD does not work, or not the speech, and he tells me that the program is incompatible. Having said that, also, I need to change the resolution of screen 1600 x 900, that only about 800 x 600 but when I do the screen becomes too small and the program returns to a large screen at 800 x 600.  He mentions the help of Vista or XP but as Windows 8.1 is more advanced I expect him to be just as compatible.  I changed the country of origin of the CD in the UK and hoped that that would solve the problem but no luck.

  Does anyone have a solution for me please?  I'm a child of 74 years, and not quite abreast with the technical jargon so its simplest form would be appreciated.

  Meg

  Original title: BBC GET INTO WINDOWS FRENCH INCOMPATIBILITY 8.1?

  Sunday,

  Hello again, just to make it count that I finally solved myself the problem by reinstalling QuickTime 6 in version 7, but I think the problem was to DO NOT to install it via the program itself, but to install itself as a separate installation, I think I read this somewhere in the course of my research, but at this point I could not remember which way I had installed it.  Hope this will help someone else in the future.

  Kind regards

  Meg