Incorrectly recognized CD-ROM

Similar Questions

• Satellite Pro U200 - incorrect checksum error (ROM (data block))

  Hello when I run my Satellite Pro U200 Toahiba
  I have an error

  Incorrect checksum (ROM (data block))
  PRESS ANY KEY TO CONTINUES.

  Pleas Help

  The most common cause for the mistakes of "Bad Checksum" is the CMOS battery on the motherboard failure.
  The battery may be empty or could have been dead. But it's really not easy to say exactly what's wrong!

  Therefore, I recommend first to access the BIOS and set it to default settings. Don t forget to save the changes.
  More you must connect to the AC adapter and should leave it plugged during on 24 hours to recharge the battery CMOS.

  Maybe it helps to get rid of this error message.
  If it doesn't help, then you should contact a technician for laptop!

• Firefox is incorrectly recognized as mobile device

  The use of Firefox in version 9.0.1
  Some sites are considered if I where using my mobile phone – for example, if I go to DirecTV.com, I see their Mobile site design... This does not happen with IE or Chrome.

  Also the sparatic problems with the site style sheets shows does not correctly.
  Gmail.com is also not recognize as valid browser firefox

  You have a user agent that is corrupted by the general.useragent.override pref and which identifies you as: undefined GoogleToolbarBB

  See:

  • https://support.Mozilla.com/kb/finding+your+Firefox+version
  • https://support.Mozilla.com/kb/websites+or+add-ons+incorrectly+report+incompatible+browser
  • http://KB.mozillazine.org/Resetting_your_useragent_string_to_its_compiled-in_default

• Incorrectly recognized USB key

  I have a Kingston DT 101 G2 flash drive.  One day, Windows stopped to recognize the it.  I started in an environment of Ubuntu and Ubuntu recognizes that he is very well, though divided into four 4 GB drives.  I deleted the partitions, it reformatted to NTFS and tried to connect back on Win7.  Nothing.  I left it for a while, but I recently got an iMac, so I thought I would give it a shot.  OSX acknowledges the reader flash very well.  I reformatted the drive flash again, this time with a FAT partition.  Plugged into my old Vista machine, and she appeared on the right.  Tried to connect on the Win7 machine.  This time, I was able to get Windows give me sound system to plug and unplug a device, but it does not appear in my computer as a storage device.  I looked in Device Manager - it's showing as a "USB Mass Storage Device" under "USB controllers", but it is interesting, it appears also under "Drives" like "Kingston DT 101 G2 USB Device", just next to my main hard drive.  If Windows recognizes now... but still cannot use it.  I tried all the methods given here (Mr. FixIt, performance store, plug into another computer) does not.  Drivers are working properly, and my USB ports work fine with other devices and media.  Can anyone help?

  Solved.  Apparently, Windows was not affecting the flash drive a drive letter.  Once I took care of it in disk management, it worked very well.

• 12.1.1 Easy Install workstation does not support Windows 10 education?

  When I jumped into an ISO of the education of 10 Windows, Easy Install Windows 10 detected but asked me to choose between family and professional edition. On the other hand, when I pop in a company of 10 Windows ISO, Easy Install correctly recognizes as Windows 10 Enterprise edition.

  Hi Benjamin,

  I apologize for the error. Easy to install for versions of 1511 was fixed so that 1511 ISOs distinguished to be Win10 (before this fix, the ISO 1511 files was unknown easy install), but ISO 1511 education files are incorrectly recognized to be multiple-version as you can see. This problem still exists, we have a bug to follow him.

  We intend to support the latest version of RedStone Win10 once it is released. I'll push the development team to solve this problem of recognition of education of 1511 at the same time.

  Kind regards

  Shawn

• How can I correct a text 'hidden' in a searchable PDF file?

  This seems to be a simple question. However, the answers are always complex, do not give the desired result and often answering a different question altogether. I say all this just to warn people at the outset that the 'problem' is easier than how many people and PDF application developers, including Adobe, generally it include the proposed "solutions" are invariably a total... Well, botch a reasonable word if somewhat underestimated.

  Here's the real problem:

  I have "searchable" PDF files created by scanning documents and their implementation through an OCR process. I create "searchable" PDF files to archive, index and possibly allow search for scanned documents. A "searchable" PDF file meets these criteria better than any other commonly used, 'portable' archive format - although I'd be happy if someone could indicate an obvious alternative I can remember. I don't have a perfect OCR results. If I need a document to edit or maybe feed in a spreadsheet or a database, I expect to be able to reprocess the page images in a given "searchable" OCR PDF and convert the content Word, RTF, Excel or another file format as needed with more carefully to the results for the archived document itself. Therefore, the "searchable" PDF document is scanned page images making it up while the OCR generated 'text' is secondary, but still important. Therefore, each file must contain images of the scanned page in sufficient detail to be efficiently converted by OCR if possible and quite readable for people who consider the images to be able to establish a process of OCR can not understand. Once scanned, these pages are the 'document' and so 'immutable '. However, OCR is not perfect. For an archive of searchable documents, it doesn't have to be, but some mistakes are important because they can prevent the document to be found by a search. Therefore, there must be a way to view and, if necessary, change the text 'hidden' in a "searchable" PDF file without changing the view of a document or how it is printed. No redaction. Not visible "corrections." None of the PDF stuff publishers want to insert in a PDF file when you edit it. I don't want to modify the document without exporting to a format suitable for an editable document. I just want enough 'correct' text hidden in a PDF "searchable".

  I apologize for the length and redundancy in my description of the problem. However, past attempts to explain my problem and objectives as well as what I've seen in response to similar questions through the Internet indicate that most people trying to answer this question coming home the same point of view shared by most, if not all, sellers PDF tool or application. They seem to think that all desire to edit a PDF file is a desire to have a PDF processing any. Or, they assume that the process of OCR employee may need tweaking of the means by which people apply and then a process like 'find the suspects' is sufficient to deal with errors. But no, it's not what I'm trying to accomplish and the responses that deal with these subjects do not meet this issue.

  In short, what tool or the application of any provider will reveal "searchable" hidden text in a file PDF produced by any OCR or any other process and then enable corrections to the text hidden without changing the document display settings at all? Note, includes hidden text generally limit the information in the box which indicates the portion of the picture that the text has been recognized. This information must be lost or changed when you change the text "available".

  Thus the tools or applications that can do that? If Adobe Acrobat Pro XI can (use of a copy of the trial showed that hidden text content may be revised, but publishing has failed by any simple way I work while trying the application), fine. However, list $ 500.00 or even a $200.00 can update a copy of Adobe Acrobat X Standard that came with my scanner is a lot of money for personal use when reviewing and changing the hidden text in a PDF "searchable" OCR is the only function I need. Therefore, other instruments suggested or applications that make what I need for less would be greatly appreciated.

  I scan a document directly or starting with a PDF "only images", no Adobe product offers a convenient way to examine and correct the 'hidden' text generated by either the process Adobe Acrobat OCR OCR tools or third-party applications. When you use Adobe Acrobat, the 'Find the Suspects' function will allow correction of the flags of Acrobat OCR results, but a lot of mistakes-for example the names are a particular problem because incorrectly recognized the outcome of the names of "viewable" files that could not be found when looking for files containing the text elements that are among the most likely entered search terms - will not be reported as "suspect" and cannot be corrected in a file to be saved as a file PDF 'searchable' where 'searchable' is Image indexable () 'Exact)"- that is a PDF file containing images of scanned documents original, no altered page - with the"searchable"text written in the file as text 'hidden' 'under' the images on the page.

  For scanning and archiving paper documents with text 'hidden' to enable computerized research, products from other suppliers should be used. Adobe Acrobat products are insufficient to the task.

  If you want to scan documents, treat them with OCR, and then convert the results to other formats - for example Word, RTF, etc. - to be edited by hand, then Adobe products can be used. However, just at how they perform this task is outside my experience and is beyond the scope of my original question.

• Apply a signature in Acrobat 9 Pro to close.

  

  Whenever I try to apply a signature to PDF it causes Acrobat I get an error window that says, 'the instruction at "0x00000000" referenced memory at "0x00000000". "The memory could not be"read" Acrobat then closes and when I re - open and try to work on the document even if I click on the signature I get another message indicating that signature, "contains incorrect, recognized, corrupted, or suspicious, data support information: given ilegal SigDict/content. On the user PKI certificates are good and are the same as those who are in the signature. Any ideas? Thank you.

  I see that you have the toolbar installed in your image TerraGo

  I found that the toolbar TerraGo conflicts trying to digitally sign a PDF file - I did not understand why.

  The only solution I have for the moment is to uninstall the TerraGo toolbar.

• How can I fix my CD-ROM drive or a DVD drive that is not recognized by Windows or other programs, so I can't play or access a CD or a DVD.

  How can I fix my CD-ROM drive or a DVD drive that is not recognized by Windows or other programs, so I can't play or access a CD or a DVD. Sometimes, when I click on one of the disks that it opens, but the page for the drive is empty. It also says to insert a disk, sometimes when there is a disc in the drive. How this can be fixed.

  Hi vtdubu,

  ·         Did you do changes on the computer before the show?

  Follow the steps in the article.

  Your CD or DVD drive is missing or is not recognized by Windows or other programs

  http://support.Microsoft.com/kb/982116

  Note: This section, method, or task contains steps that tell you how to modify the registry. However, serious problems can occur if you modify the registry incorrectly. Therefore, make sure that you proceed with caution. For added protection, back up the registry before you edit it. Then you can restore the registry if a problem occurs. For more information about how to back up and restore the registry, click the following link. http://support.Microsoft.com/kb/322756

• Satellite Pro M70: Update Bios - ROM size Error Message is incorrect

  I downloaded the BIOS updated but a message "ROM size is incorrect" when I try to run the installer.

  This, according to the web site, should be a simple process! I know I'm a beginner but.

  I have a real struggle

  Hello

  I think you chose the wrong BIOS.
  You should be careful with these updates because the bad BIOS and bad upgrade procedure can bring a lot of trouble with the laptop and the motherboard.

  Check all the details before you start any update

• Tecra S1: DVD ROM not recognized burner (Plextor PX-608AL)

  Hi all

  I bought a DVD ROM Writer (Plextor PX-608AL) that is not recognized by my Tecra S1 with XP Pro.

  I installed the latest BIOS v2.50 as well as the latest Windows patches.

  To the search, in the Setup of the BIOS (ESC during startup), the drive is not available.

  I tested the drive in my old non - Toshiba with Win2k laptop with no problems.

  Mounting frame is also OK (tested with the original Toshiba DVD ROM)

  Y at - there a trick to getting a 3rd disc part DVD working in a Tecra notebook?
  What is generally a problem

  Thanks for reading my ad and you answers or advice

  Klaus

  Hello

  It won't be very easy get your new work of drive on your S1, I will explain why:

  Most DVD players for laptops (including your Plextor 608AL) do not have jumpers to set
  their place according to the requirements of the laptop.
  Three settings are available: master/slave/CableSelect

  Most Toshiba laptops require the CD to react as a secondary master drive, unfortunately
  a disc factory settings in bulk comes as a disk Primary Master or CS.

  There are two options how to get to missing jumpers to make it work.
  (1) thanks to a new firmware patch that has this option defined by the software based on Toshiba standard or
  (2) by a bridge of material on some pins to the back of the drive.

  As you can see, both options will cancel the guarantee of the reader and are not easy for a techie/technician.

  As for option 1) on the search for a suitable firmware... no there are none available now. I checked the official site of Plextor, but also sites of patch firmware... NO CONCLUSION.
  According to another Forum, business Plextor responded to a request for a firmware adapted with this answer:

  start of quote:
  Dear Sir.

  The drive is detected beeing as a master drive.
  This setting cannot be changed. Are there no rider to do so.
  How mount you the device to your laptop, it's up to you.
  It of different for every laptop and either found in the manual of books or you can request that information from the manufacturers for your laptop.

  Kind regards
  end quote (source: http://club.cdfreaks.com/showthread.php?t=199145 )

  As in option 2), it requires some skills with soldering and I do not think that this forum is suitable for me to explain this procedure. You should google around to find the procedure "pin 47 ashore" on your own, taking all the risks of losing the warranty and/or the drive on your own.

  Concerning

  chain

• Update BIOS Qosmio X 300 has failed - the size of the ROM file is incorrect

  Hello

  I use TEMPRO, and he suggested to update my BIOS.
  I downloaded the file and run the Setup file. Unfortunately, it says "the size of the ROM file is incorrect.

  This means I m doing wrong? or I have the latest BIOS in my system.

  Please advice.

  Thank you.

  Hello

  First of all I don't do everything what said Tempro!

  Secondly, this message was posted here in the forum several times and if you are looking for the size of the ROM file is incorrect, you would find that:

  http://forums.computers.Toshiba-Europe.com/forums/thread.jspa?MessageID=120455
  and this, for example:
  http://forums.computers.Toshiba-Europe.com/forums/thread.jspa?MessageID=73284

  The problem is that you have unzipped the Cabinet correctly!

  In any case, I think that it s not useless to put anything, if the laptop runs without problem!

• Satellite A200 - 1BW PSAECE: update BIOS: size of Rom file is incorrect

  Hello
  I tried to update the bios from the Web site.
  But when I flash, it is said that "file size Rom is incorrect and does not update to the Bios.

  How can I sort this problem?

  First question:
  Why do you update the BIOS?

  The update of the BIOS is not necessary if the laptop works properly!

  But back to your problem.
  Found a solution and an answer why the error message: size of the Rom file is incorrect is displayed:

  Check this box:
  + I can't update my BIOS with the function BIOS Phoenix-file ZIP Windows XP Windows. +
  + I always receive following error message: the size of the ROM file is incorrect. +
  http://support.toshiba-tro.de/KB0/TSB59014X0000R01.htm

  Good luck

• Update the BIOS of the A110 to satellites--> the size of the ROM file is incorrect

  I tried upgraing BIOS download from Toshiba site but error message.
  The size of the ROM file is incorrect - suggestions for moving forward.

  Hello

  Today, it seems it's your lucky day...
  Have looked into the Toshiba, basic knowledge about the Toshiba support home page and found this FAQ document:

  http://support.toshiba-tro.de/KB0/TSB59014X0000R01.htm

  It should help you

• Update the Bios of satellite P10-304:-the size of the Rom file is incorrect

  P10 - 304 - downloaded Update Bios, but when I went to run it I get the message "the size of the.
  ROM file is incorrect. What can I do now?

  One question; Why you want to upgrade the BIOS?

  I studied on the knowledge base of the Toshiba site and found this:
  I always get an error message: the size of the ROM file is incorrect.
  http://support.toshiba-tro.de/KB0/TSB59014X0000R01.htm

  It will be useful.

• SP2100 CD-ROM not recognized

  Suddenly my CD (Teac) is no longer recognized.
  Message in Device Manager - properties:
  Windows has loaded the driver in memory, but can not find the device (Code 41)
  With an external DVD-writer/CD-ROM (HP) on USB and Firewire, I get the same message.
  Starting fron CD is also not possible.
  Any suggestions?
  Paul

  Hello

  41 code means that the driver has been installed successfully, but the material was not found!

  Normally, the material is damaged with this error message, but your external drive has got the same message!
  So, there is a deeper problem with the support of CD player!

  If you set a system point before occure failure for the first time of restoration, start the System Restore tool and return to this point!

  Then it should work again! Otherwise post again!

  Good bye