TKProf: 0 user SQL statement trace file
Hello!Please explain, what is the difference of conversion of trace file of user session and a process internal/bottom of tkprof?
I get message 'SQL statement of 0 user in the trace file' cause this difference?
In my target sitting, I published:
startThanks and regards,.
sys.dbms_system.set_ev (...,..., 10046, 12, ");
end;
/
Start
sys.dbms_system.set_ev (...,..., 10053, 1, ");
end;
/
Pavel
Have you tried a 10053 trace of tkprof?
This only goes to show anything. 10053 tracks are supposed to be read as they are. TKProf is here to treat the 10046 trace.
Tags: Database
Similar Questions
-
Cannot generate the SQL * Net trace file on Linux
Oracle 11 g 1 material
RHEL 6.3
--------------------
SQLNET.ora file:
SQLNET. AUTHENTICATION_SERVICES = (DOB, TCPS, NTS)
SSL_VERSION = 0
SSL_CLIENT_AUTHENTICATION = TRUE
SSL_CIPHER_SUITES = (SSL_RSA_EXPORT_WITH_RC4_40_MD5)
LOG_DIRECTORY_CLIENT = / home/oracle
LOG_FILE_CLIENT = SQLNET.log
TRACE_DIRECTORY_CLIENT = / home/oracle
TRACE_FILE_CLIENT = SQLNET.trc
DIAG_ADR_ENABLED = OFF
TRACE_UNIQUE_CLIENT = WE
The sqlnet.ora file above does not create a trace file when you try to use SQL * more to connect to the remote database.
What could be the problem? (The user has write access to the directory where the log file and the Commission of truth and reconciliation must be created)
Answered my own question. It was that o/s was THAT RHEL 5.3 and that caused some compatibility problems. Updated to 6.5 and all is fine.
-
Generate the Trace file to a sql query
Hi all
I want to generate a trace for a sql query file so that I can generate a .out file corresponding I need to check the performance of an application before using it.
Anyone can guide me please how to do this.
I know how do to generate a trace for a concurrent program, but right now, I want to track for a simple sql query.
Kind regards
AnkurHello
Agreed. but I thought that if OP do not have access to metalink then?In any case I not substitute me your answer.
Oops. Sorry I did not read the lines below.
You can turn simple trace for this particular session.
Oracle will generate trace files (.trc) for each session where the value of SQL_TRACE = TRUE and write them to the USER_DUMP_DEST destination. That you can use tkprof to read the generated trace file.Kind regards
TajPublished by: Mohammed Taj on July 14, 2009 10:11
-
Interpreting the Trace file.
Hi, I use 10.2.0.4.0 oracle version.
I have some info to trace file as below, for one of the query. So how should I interpret the trace file? What is the problem in the application and scope of the improvements in the query? Please note that I withdrew the request and plans of the trace file, I've posted only the sections of waiting.
call count cpu elapsed disk query current rows ------- ------ -------- ---------- ---------- ---------- ---------- ---------- Parse 1 0.14 0.13 0 0 1 0 Execute 1 6.63 162.12 33540 72921 383 0 Fetch 17272 178.89 1933.95 274835 3147603 20 259063 ------- ------ -------- ---------- ---------- ---------- ---------- ---------- total 17274 185.66 2096.21 308375 3220524 404 259063 Misses in library cache during parse: 1 Optimizer mode: CHOOSE Parsing user id: 36 Elapsed times include waiting on following events: Event waited on Times Max. Wait Total Waited ---------------------------------------- Waited ---------- ------------ control file sequential read 4 0.00 0.00 db file sequential read 302812 0.62 1913.89 latch: cache buffers chains 3 0.04 0.04 direct path write temp 501 0.01 0.30 SQL*Net message to client 17272 0.00 0.04 db file scattered read 120 0.02 0.63 direct path read temp 608 0.14 1.71 SQL*Net message from client 17272 44.81 31865.74 SQL*Net more data to client 15 0.00 0.00 latch: object queue header operation 1 0.00 0.00 latch: library cache 3 0.03 0.04 latch: library cache pin 1 0.00 0.00 latch: cache buffer handles 1 0.00 0.00 ******************************************************************************** OVERALL TOTALS FOR ALL NON-RECURSIVE STATEMENTS call count cpu elapsed disk query current rows ------- ------ -------- ---------- ---------- ---------- ---------- ---------- Parse 1 0.14 0.13 0 0 1 0 Execute 1 6.63 162.12 33540 72921 383 0 Fetch 17272 178.89 1933.95 274835 3147603 20 259063 ------- ------ -------- ---------- ---------- ---------- ---------- ---------- total 17274 185.66 2096.21 308375 3220524 404 259063 Misses in library cache during parse: 1 Elapsed times include waiting on following events: Event waited on Times Max. Wait Total Waited ---------------------------------------- Waited ---------- ------------ SQL*Net message to client 17275 0.00 0.04 SQL*Net message from client 17274 75.57 31941.39 SQL*Net more data from client 2 0.00 0.01 db file sequential read 302812 0.62 1913.89 control file sequential read 4 0.00 0.00 latch: cache buffers chains 3 0.04 0.04 direct path write temp 501 0.01 0.30 db file scattered read 120 0.02 0.63 direct path read temp 608 0.14 1.71 SQL*Net more data to client 15 0.00 0.00 latch: object queue header operation 1 0.00 0.00 latch: library cache 3 0.03 0.04 latch: library cache pin 1 0.00 0.00 latch: cache buffer handles 1 0.00 0.00 OVERALL TOTALS FOR ALL RECURSIVE STATEMENTS call count cpu elapsed disk query current rows ------- ------ -------- ---------- ---------- ---------- ---------- ---------- Parse 11 0.02 0.01 0 0 0 0 Execute 348 0.20 0.17 0 0 1 0 Fetch 367 0.06 0.37 59 1187 0 3806 ------- ------ -------- ---------- ---------- ---------- ---------- ---------- total 726 0.28 0.56 59 1187 1 3806 Misses in library cache during parse: 11 Misses in library cache during execute: 10 Elapsed times include waiting on following events: Event waited on Times Max. Wait Total Waited ---------------------------------------- Waited ---------- ------------ db file sequential read 59 0.01 0.32 1 user SQL statements in session. 348 internal SQL statements in session. 349 SQL statements in session. ********************************************************************************
But rewrite the SQL code will probably be irrelevant.
If most of the numbers in the file plan and execution of trace is correct, then it is not more time is lost somewhere in the network that you send to 260 000 lines back and forward with a size of 15 lines extraction (the default in sql * more)?
You must increase the size of mining significantly.
And you can watch some of the writings of Charles Hooper on the monitoring network:
http://hoopercharles.WordPress.com/category/network-monitoring/ -
Trace file has many references obj # but this oppose is nowhere in SQL statements
Hi all
Oracle 11.2.0.3 x 64 on x 64 Linux.
No CARS.
I have a trace file (captured with lie = true, wait = true) where inside, I have a large number of obj # references for the object that is not in the above trace file nowhere.
Example of part of the trace file:
...
PARSING IN CURSOR #22 len = dep 52 = uid 0 = 46 oct = cover 3 = 46 tim = hv 43179827168145 = ad 1014772292 = "c00000023baba230" sqlid = "amqq2ncy7sck4."
Select TNC in PF_TRX where (CTN =: b0 and ROWNUM = 1)
END OF STMT
ANALYSIS #22:c = 0, e = 17, p = 0, cr = 0, cu = 0, set = 0, r = 0, dep = 0, og = 1, plh is 2442708035, tim = 43179827168144
LINKS FOR #22:
Link #0
oacdty = 01 mxl = 32 (25) = 00 mxlc bad = 00 = 00 = 00 pre scl
oacflg = 00 fl2 = 1000000 frm = 01 csi = 32 off siz = 32 = 0
kxsbbbfp = 9fffffffbf5faba0 = 32 avl bln = 10 flg = 05
value = "0606015172".
EXEC #22:c = 0, e = 94, p = 0, cr = 0, cu = 0, set = 0, r = 0, dep = 0, og = 1, plh is 2442708035, tim = 43179827168314
WAITING #22: nam ='SQL * Net message to client' ela = 1 driver id = 1413697536 #bytes = 1 p3 = 0 obj #= 775422 = 44216143020385 tim
FETCH #22:c = 0, e = 13, p = 0, cr = 2, cu = 0, set = 0, r = 1, dep = 0, og = 1, plh is 2442708035, tim = 43179827168378
"STAT id #22 = 1 cnt = 1 pid = 0 obj = 0 op = pos = 1' STOPKEY COUNTY (cr = 2 pr = 0 pw = time 0 = 0 US)"
STAT #22 = 2 cnt = 1 pid = 1 pos = 1 obj id = 8236 op ='INDEX RANGE SCAN PF_TRX_1IX (cr = 2 pr = 0 pw = time 0 = 0 US cost = 1 size = 11 card = 1)'
WAITING #22: nam ='SQL * Net client message' ela = 135 driver id = 1413697536 #bytes = 1 p3 = 0 obj #= 775422 tim = 44216143020630
...
obj #= 775422 is an index into a schema user wealth of paintings, consideration of related things.
But the picture, who own index which is never mentioned in the trace file all (DDL, DML, or Select statement).
TKPROF does not display as well without the presence of this table.
How to interpret these topics, as registrations in the event of mine is the biggest event of waiting.
THX,
Damir
«SQL * Net message to client "is in fact a wait on the BONE (layers TCPIP).» Oracle is not clear when the package reaches the customer, he knows only that she has presented the package to the TCPIP services provided by the operating system on the database server.
Hemant K Collette
-
Hi all
We have a problem with the profile option "initialize SQL statement - Custom." We put this at the user level. After awhile, we have erased the value of the this user profile option.
But you can still see the trace files generated are getting updated. We checked this files trc pathname returned at the bottom of the query.
Select name, value
the parameter $ v
WHERE name like 'user_dump_dest;
Please help us on how to solve this problem. We use Oracle Apps R 12.1.2 version.
Thanks in advance
Rambaud
Find the trace file creation session and kill this session
HTH
Srini -
Trace file is not getting created - TKPROF
Hello
the trace file is not created when trying to find the result TKPROF
I did the following steps:
1 ALTER SYSTEM SET TIMED_STATISTICS = TRUE;
2.
@/rdbms/admin/utlxplan.sql
CREATE SYNONYM PUBLIC PLAN_TABLE FOR SYS. PLAN_TABLE;
GRANT SELECT, INSERT, UPDATE, DELETE ON SYS. PLAN_TABLE TO THE PUBLIC;
3.
ALTER SESSION SET SQL_TRACE = TRUE;
SELECT COUNT (*)
DOUBLE;
ALTER SESSION SET SQL_TRACE = FALSE;
So I check USER_DUMP_DEST directory that is mentioned in the init.ora file... but I couln t find any trace file
NOTE: file init.ora
# define directories to store the tracks and alert files
background_dump_dest=%ORACLE_HOME%/Admin/clustdb/bdump
user_dump_dest=%ORACLE_HOME%/Admin/clustdb/
then I created a new directory as USER_DUMP_DEST as below
CREATE or REPLACE DIRECTORY user_dump_dest AS 'D:\app\user1\product\11.2.0\dbhome_1\admin\clustdb '.
GRANT ALL ON DIRECTORY user_dump_dest to THE PUBLIC
then I run the
ALTER SESSION SET SQL_TRACE = TRUE;
SELECT COUNT (*)
DOUBLE;
ALTER SESSION SET SQL_TRACE = FALSE;
Eventhen it is not created. What could be the problem...
Thanks in advance
Concerning
Gowtham
view the results of
SQL > SEE THE USER_DUMP_DEST PARAMETER
-
Oracle Doc ID 11677061.8 mentions in 11.2.0.2 10046 trace / SQL_TRACE displays the address of the instantiation after the # rather than the number of cursor.
Can someone explain what a "address instantiation" is and how to use it to identify the sliders in the trace of the files in an improvement on number of cursor.
I have a theory that it may be useful when dealing with accumulated from several trace files using trcsess trace data.
For the most part, I'm just curious to see if I can improve my performance skills by exploiting this change. I can't find a single reference in the article or the blog describing the change.
An example of the largest number of cursor that I see these days.
PARSING IN CURSOR #48003855878616 len=65 dep=0 uid=370 oct=6 lid=370 tim=1366907498174148 hv=1477430740 ad='209f99a028' sqlid='40hwrntc0zmfn'
ANALYSIS #48003855878616:c = 0, e = 4842, p = 0, cr = 0, cu = 0, set = 0, r = 0, dep = 0, og = 1, plh = 0, tim = 1366907498174146
Pre 11.2.0.2 what it would look like
PARSING IN CURSOR #3 len=65 dep=0 uid=370 oct=6 lid=370 tim=1366907498174148 hv=1477430740 ad='209f99a028' sqlid='40hwrntc0zmfn'
ANALYSIS # 3: c = 0, e = 4842, p = 0, cr = 0, cu = 0, = 0, r = 0, dep = 0, og = 1, plh = 0, tim = 1366907498174146
Here's what I read on the subject in 2010:
The problem is that with the restructured cursor caching in 11g a statement executed again would come by number of different cursor for each run. As the number of cursor and the sqltext did not since the last use of the slider, the sqltext was printed for each execution of a cursor. It's a significant problem for applications like Oracle E-Business, where is typical SQL statement it is many thousands of characters. In some cases, this has increased the size of the file trace of an order of magnitude, and I'm sure it could be even worse.
The solution was to pass the handle of the cached cursor (which is probably the address) and display instead of the cursor number. This should mean that the text is printed only on the first analysis of the SQL statement and the size of the trace file goes back to something reasonable.
I believe you can "join" these new id values cursor from a trace file in a column of address in v$ sql, but I have not checked myself.
I do not think that the change was intended to give the advantage of trcsess you are suspect, but it could turn out to be useful for this.
-
Can generate the file TKPROF without the SQL does not finished?
Hi all:
I want to generate the TKPROF to the trace file file, can generate the file TKPROF without the SQL does not finished? The file TKPROF can be used? because the report is too large. My environment is ORACLE 11.5.9
Concerning
TerryYes, you can run a tkprof on one incomplete (or currently being created) trace file.
HTH
Srini -
is trace SQL - possible to appoint the output trace file?
Hello
I put DBMS_SYSTEM. SET_SQL_TRACE_IN_SESSION in my database. This is the version 10.2 running on Linux.
Now, I want to display the trace file using tkprof. It is in my directory in $ORACLE_BASE/admin/SID/udump. But there are more tracks and they are all the same: instancename_ora_traceid, is very difficult to find the right one.
Is it possible to make the sql trace file to be named by any other means?
Thanks in advance.
SousouHello
Yes, you can change then what is the purpose of this
ALTER session set tracefile_identifier = trace_file_nameAdd with the tracefile_identifier
Select c.value | '\' || d.instance_name | "_ora_" | a.SPID | '.trc' trace_file_is_here
v $ process a, v$ session b, v$ parameter c, v$ instance d
where a.addr = b.paddr
and b.audsid = userenv ('sessionid')
and c.nom = 'user_dump_dest;-Pavan Kumar N
Published by: pounet on December 9, 2008 22:23
-
Can I use function defined by the user in the control file Sql Loader?
Hi Master,
Can I use fuction user-defined in the sql loader control file? Please advise... !!
If you can provide an example... It's very kind of you.
Concerning
AR
Here are a few examples that should give you clues: Sql loader
I seriously wonder if why you use the century previous SQL * Loader instead of a external table:
ORACLE-BASE - external Tables: querying data from flat files in Oracle
-
FDM generated SQL statement in the log file?
Hello everyone, hopefully a simple question:When you perform an import using FDM, I know that behind the scenes of a SQL SELECT statement statement composed and performed on the database server. My question: the actual SQL statement is retained in a newspaper somewhere (so that we can see it?) In our case, it's an Oracle DB server and we use the ERPI adapter; not sure if it's relevant. We would like to enter this SQL statement and use it as a starting point for other things.
Thanks in advance for anything you can offer.
The statement SQL is not written in the journal of the adapter. The only things that are registered are what show in the file card log if you enable loggin to the adapter source ERPi in action 'Get Data'.
-
How to generate Trace files in SQL * more
Hi friends,
How to generate Trace files in SQL * more?
I have no idea
Thank you
REDAhttp://www.orafaq.com/wiki/SQL_Trace
-
Interpretation of Trace files with the following statement: swap_info
Could someone tell me where I can find a way of interpreting the following entry in a trace file:
loadavg: 59,19 53.52 42.27
Exchange of information: free_mem = 1779.71 rsv M = 13442,54 M
Alloc = DISP 12032,48 M = swap_free 12821.84 = 14231,91 M
F S UID PID PPID C PRI OR ADDR SZ WCHAN STIME TTY TIME CMD
0 S 4162 1 3 40 20 oracle? 606691? 14:01:49? 0:39 ora_j001_db.
I need assistance with the headings for the swap_info and columns below?
Thank you
Johnloadavg: 59,19 53.52 42.27
If you have 4 or 8 processors, these are numbers very high!
OTOH, if you have 64 processors, you have still a few idle CPU cycles.Exchange of information: free_mem = 1779.71 rsv M = 13442,54 M
Alloc = DISP 12032,48 M = swap_free 12821.84 = 14231,91 MThese figures depends on how swap is allocated your OS.
Without a context (i.e. without understanding the specifics of the OS and the memory management configured) interpretation of the figures of swap and memory is meaningless.
Hemant K Collette
-
SQL statement to check if a file exists
Good afternoon
I thought I saw once a post that had a SQL statement that would check a table to check if a record exists and return true or false... He would return all records, just a Boolean... Such a function exists? I searched the forums, but I don't remember what I was ready when I found this...
Thanks in advance for any help you can offer.
DonaldHi Donald,.
Oracle SQL is not a Boolean data type (see: http://download.oracle.com/docs/cd/B19306_01/server.102/b14200/sql_elements001.htm#sthref19 for types available).
As a general rule, a custom function returns 0 or 1 or 'Y' or ' no 'TRUE' or 'FALSE' or something similar, like a number or a varchar2.
Depending on what you need to do and where you need to do, there are other options available. For example, a validation of the page, you could do a validation EXISTS of:
SELECT 1 FROM TableX WHERE Field1 = value
This would amount to true or false and validation would be success or failure as a result.
Within a process, you would do something like:
DECLARE vCOUNT NUMBER; BEGIN SELECT COUNT(*) INTO vCOUNT FROM TableX WHERE Field1 = value; IF vCOUNT > 0 THEN do something if there is a record; ELSE do something if there isn't a record; END IF; END;
Andy
Maybe you are looking for
-
Try to perform the update on our iPhone 5s 9.3; Continue to receive error failure to perform the update because I am not connected to the internet. Wifi is in place and I am connected to wifi said. What I am doing wrong
-
Brightness buttons does not.
Well, two control brightness buttons worked very well until I uninstalled the default graphics driver. Now, when I press it I always get the GUI cursor, but the brightness does not change. My brightness can be changed very well in windows power setti
-
How the string output to a common indicator?
Hello I have a sequence of battery with 10 picture sets, there is a wait to delay of 2 seconds between each image. I have a common indicator of channel set and I want to output a string to this indicator in the first framework before the codes betwee
-
Why can I not hear a voice on my laptop?
I hear no song when I use my laptop. It runs Windows XP.All of a sudden my sound is really messed up, I get this weird feedback who resembles outsiders trying to communicate to me.If I go on YouTube to listen to the music, the instruments are watered
-
Question of printer model # ATC705EB
Just bought a new Acer computer and finish all hang on to the top but the printer. No place to fix the printer cable... I downloaded the manual and here, he says, I think, I need a memory card? You want to make sure before I buy one and find out afte