TMS CCC with driver

Similar Questions

• How can I perform a clean installation of Mac OS x for my iMAC, retina 5K late 2014 with drive of Fusion with the intact Recovery HD partition?

  How can I perform a clean installation of Mac OS x for my iMAC, retina 5K late 2014 with drive of Fusion with the intact Recovery HD partition?

  Pure how to install OSX on a Fusion drive and keep the recovery disc function

  These instructions assume that your iMAC partitions or file systems has been damaged and you want to restore to the way most efficiency with fusion drive and the recovery partition, similar to what was built in the factory.

  These instructions work for the iMAC, retina 5K end 2014 version comes with OSX Yosemite. The scores of major drive of the 128 G SSD and 3 TB of HARD drive has been configured as a logical drive (merger by car).

  WARNING: These instructions here are shared for interest only. Readers to take their own risk by following these instructions. The author is not responsible for any damage caused by following these instructions.

  This is the target disk partitions, and the configuration that we want to achieve.

  Disk0 is the 128 GB SSD - solid state drive and holds the start of the partition (disk0s3)

  Disk1 is the 3.0 to HDD - mechanical transmission and holds the Recovery HD partition.

  There are two EFI partitions to partition table GUID on both hard drives (disk0s1, disk1s1).

  Disk space remaining (partition disk0s2 and disk1s2) are used to create the disc of Fusion 3.1 to named "Macintosh HD".

  / dev/disk0 (internal, physical):

  #: NAME SIZE TYPE IDENTIFIER

  0: GUID_partition_scheme * GB 121,3 disk0

  1: disk0s1 EFI EFI 209.7 MB

  2: Apple_CoreStorage GB LVG 121.0 disk0s2

  3: disk0s3 Apple_Boot Boot OS X 134,2 MB

  / dev/disk1 (internal, physical):

  #: NAME SIZE TYPE IDENTIFIER

  0: GUID_partition_scheme * 3.0 to disk1

  1: EFI EFI 209.7 MB disk1s1

  2: disk1s2 Apple_CoreStorage TB 3.0 LVG

  3: disk1s3 Apple_Boot Recovery 650.0 MB HD

  / dev/disk2 (internal, virtual):

  #: NAME SIZE TYPE IDENTIFIER

  0: Apple_HFS Macintosh HD + 3.1 TB disk2

  Logical volume on disk0s2, disk1s2

  0D807F6E-FB7C-418F-AAF4-EF3EA3525D10

  Fusion unencrypted drive

  Here's how we do it.

  • A. clean reinstallation of Mac OS x.
  • 1. make sure that you back up all your data on the hard drive using Time Machine or other means. The following procedure will delete all data.
  • 2. create the OSX install USB, insert it to the MAC workstation.
  • 3. given that us will be operated on the internal trunk of the reader of the Mac, it must start on OSX install USB (see Y.).
  • 4. in the menu at the top of the screen, select disk utilities.
  • 5. turn highlighted the volume of disk Fusion called "Macintosh HD." Click clear to clean.
  • 6. If his success, then go ahead to install OSX new to that partition, as usual.
  • 7. otherwise, if it does not, that means fusion drive has been damaged.
  • 8 follow the instructions below to fix it.
  • . B. Split disc Fusion in the physical hard disks
  • 1. Since us will be operated on the internal drive of the Mac trunk, assumes that we already have boot up OSX install USB drive (see Y.).
  • 2. in the menu at the top of the screen, select utilities and Terminal.
  • 3. on the screen of the terminal type:
  • Cs diskutil list.
  • You will see something similar to the screen below.
  • 4 copy the long string after Logical Volume and replace the UUID with it in the following command to delete the logical volume of the disc fusion (aka coreStorage of logical volume):
  • diskutil deletevolume cs UUID
  • For example:
  • diskutil deletevolume E59B5A99-F8C1-461A-AE54-6EC11B095161 cs
  • 5 copy the long string after the logical volume group and replace the UUID with it in the following command to remove the drive (aka coreStorage) fusion:
  • diskutil cs remove UUID
  • p. ex. diskutil cs remove E03B3F30-6A1B-4DCD-9E14-5E927BC3F5DC
  • 6. at this stage, the fusion drive has been deleted, and hardsisk SSD and mechanical hard drive will be reappear in diskutil or separate records.
  • 7. If step 5 or 6 takes more than 30 minutes to complete, this means that the fusion drive has been corrupted. You can follow the commands below to clear the table to partition the hard way. First command clears the SSD drive, second command erases the HARD drive.
  • The command does not return a response, after 1 minute, press Ctrl + Z to complete orders. 1 minute is enough data to code and erase the partition table on the disk.
  • cat/etc/random >/dev/disk0
  • cat/etc/random >/dev/disk1
  • . C install a new copy of Mac OS x for the hard drive HDD and tested this disk partition hard recovery work.
  • 1. go on diskutil to create a partition called Macintosh HD HDD hard drive using all the space there.
  • 2 do the same with the mechanical hard drive.
  • 3. follow the usual procedure to boot from the installation of OSX USB and install a new copy of Mac OS x hard disk SSD.
  • 4. This will create the correct priming of the partitions, recovery hard drive partitions and PSX partitions hard disk HDD.
  • 5. once the installation is complete, test if OSX may start successfully, but no need to go through the initial MAC OS x didn't put in place that we're going to waste this and do the installation again later.
  • 6. we must now test if the recovery hard drive partition works.
  • 7. reboot for hard drive recovery (see X - by pressing command and R at the same time during boot right after that you hear sound start and release only a few seconds after you see the apple logo and the progress bar for loading...)
  • 8. it is important to test and make sure that the partition of hard drive recovery.
  • D. recreate the fusion drive
  • 1 since us will be operated on the internal trunk of the reader of the Mac, it must start on OSX install USB (see Y.).
  • 2. in the menu at the top of the screen, select utilities and Terminal.
  • 3
  . on the screen of the terminal type:
• diskutil list.
• You should find that we have a list of disk group hard physical volume only, no logic here still.
• 4. you will see something similar to the screen below.
• 5. search for the largest partition on the SSD hard drive, which should be close to the maximum size of HDD to the SSD (121 G, for example) and mark the name of the device, this will usually be something like/dev/disk0s2
• 6. search the largest disk partition mechanical forming fusion with the SSD hard drive. This should be close to the maximum size of the mechanical hard drive (for example 3 TB) hard disk and mark the name of the device, this will usually be something like/dev/disk1s2
• 7
. Now let's create the merger in car (group alias logical volume) in the Terminal, type: diskutil cs create nom_lecteur driveIDs
• The number of the driveIDs is unlimited, it may be a number of discs, or a number of disk partitions. Always put the faster discs first, for example for our SSD disk0s2
• For example:
• diskutil cs create fusiondrive disk0s2 disk1s2
• diskutil - the version of disk utility command line.
  cs - This calls for Core Storage, which is necessary for the merger.
  create - creates a basic storage group.
  nom_lecteur - is the name of the drive and how you want that he
• appear in the disk utility (not the Finder - that comes later). You can call it what you like; in our example, we named our Fusion table "Fusion".

driveIDs - Here is the Player IDs of the readers you want as part of your Fusion table, separated by a space. In our example, they are 'disk0' and 'disk1', but it may be different in your configuration.
• It is important that the faster hard drive appears first in the command, which in our case the disk0s2 (a partition in the SSD). In this way, drive fusion will use this disk as primary and the cache. The second disc in the command, in this case disk1s2 (a partition on the HARD disk). The secondary disk (HARD drive) is used to store less frequently used files.  Otherwise, the fusion drive performance will be worse that it is designed for.
• 8. you will see something like below appear on the screen:
• Creation Volume logical storage of kernel
• Move isk0s2 storage of carrots
• Disk1s2 of switching for the storage of carrots
• Waiting for logical volume group appear
• Discovered the new group of logical volumes 'DBFEB690-107B-4EA6-905B-2971D10F5B53 '.
• Store LVG UUID: DBFEB690-107B-4EA6-905B-2971D10F5B53
• Finished CoreStorage operation
• 9 copy to the bottom of the string after "Discovering new Volume Logic Group" using the command + C
• 10. next, create the partition of the merger (alias logical volume) drive named "Macintosh HD".
• In the Terminal, type: diskutil createVolume groupString jhfs cs + size volumeName
• For example:
• Diskutil createVolume DBFEB690-107B-4EA6-905B-2971D10F5B53 jhfs cs + 'Macintosh HD' 100%
• diskutil - once again, this is the version of disk utility command line.
• cs - called the basic storage functions, which are necessary for this arrangement.
• createVolume - this is the command to create the storage area real for the reader who is represented by an icon on your desktop.
• groupstring - this is the long alphanumeric string you copied in the previous step. It identifies the table you created such as getting a volume placed on it.
• jhfs + -the format of the disc. It is Apple (journaled) extended Format, which is recommended for drives with an operating system installed on it.
• VolumeName - the actual name of the volume, how it should appear under the icon. If there is a space in the name, you must put the full name in quotes ("name") or put a slash before the (name Drive\) space. In our example, we made these, naming our volume "Macintosh HD".
• size : this is the size of the volume. In our example, we had a 1.1 TB drive. We used '1100g' to describe what 1100 GB (1.1 TB to base 10). Otherwise, we could have also used 1.1 T or even 100% as a size.
• 11. go to diskutil to verify that you can see this new partition on the list.
• 12. test by erasing all the data from it.
• 13. then you can go ahead to start on the USB drive to install OSX and install a new copy of Mac OS x on it.
• 14. This will allow you to keep the recovery disk feature.
• X. how Prime to recover partition
• Press and hold the command and button R set immediately after hearing the bells to boot.
• Only release it 2 seconds after you see the Apple logo on the screen and the progress bar for the start. This will start the partition of hard drive recovery.
• Y. how-to boot OSX install USB
• Press and hold the command and the optionkey together immediately after hearing the ringing of boot.
• Only release it 2 seconds after you see the Apple logo on the screen and it will give you a list of startup disk choice, choose the OSX install USB to boot from.

• Windows 7 on a computer with drive SSD C which has now a windows directory of $. ~ bt

  Original title: Geoff

  I run Windows 7 on a computer with drive SSD C which now has a windows directory of $. ~ bt which I don't want.

  I can't remove this directory despite several attempts!

  Please help me remove this unwanted directory as I do a lot of editing video and need all the HP of SSD disk space.

  PS I enjoy Windows 7 and will eventually pass Windows 10, but not again, I thank you.

  This will help you - http://blog.ultimateoutsider.com/2015/08/using-gwx-stopper-to-permanently-remove.html

  Disk Cleanup also removes temporary files created by Windows 10 - but they will only come back unless you stop the process.

• How can I check the toner level in my HP Laserjet 1320 with driver W7?

  Original title: HP Laserjet 1320

  How can I check the toner level in my HP Laserjet 1320 with driver W7?

  You probably can't, HP does not have software win7 / drivers, so you use drivers win7 default, which has all the features of the HP software

• VBS silent printing won't work with drive X 1

  
  Hello

  For nearly a year I used a VBS script to open and 'silent print' a PDF to the default printer - the script continues to work on machines using drive X but with drive x 1 I see a message saying that the path is not valid

  Set oWsh = CreateObject ("Wscript.Shell")

  oWsh.run ' "" AcroRd32.exe"" / p/h ' & 'C:\MostRecent\MostRecent.pdf",,true '.

  The real message is, 'there was an error opening this document; the file name, volume name, or volume label syntax is incorrect. "

  I can paste the address C:\MostRecent\MostRecent.pdf in windows Explorer and adobe correctly opens the file and I can print it then manually.

  I would point out that this script vbs has worked for a long time before reader X 1 set to day - my client will not consider return to older readers of adobe

  Any ideas or advice from someone?

  Hello

  Thanks for the advice, I have now managed to get this working using the following script... It is good with Adobe Reader X 1 and Adobe Reader DC...

  Set oWsh = CreateObject ("Wscript.Shell")

  «AcroRd32/h/p, C:\MostRecent\MostRecent.pdf",,true» oWsh.run

  Thanks to pseudonymous Test and Bernd Alheit for their advice

• On Windows 7 Ultimate, office with drive C (System), can D K and L labels, I install Adope Creative Suite 6 Production Premium (from cd) for drive D (not C). Thank you.

  On Windows 7 Ultimate, office with drive C (System), can D K and L labels, I install Adope Creative Suite 6 Production Premium (from cd) for drive D (not C). Thank you.

  You can, but there may be some problems and many files will be saved on your drive c, in any case.

• Resilliency planning TMS with driver

  Hi all

  We plan to put our cluster 8710 2 blades behind the conductor, now programmed with WebEx conferences are supported. We also add an additional 8710.

  Here is what I intended with respect to the design of driver:

  Service preference

  Hen Bridge 1-8710 cluster

  Marked for planning

  Used for the CMR / appointment conferences only failing 8710 in pool 2

  Blade 2-8710 pool deck

  Unmarked for planning

  Used for only scheduled conferences if 8710 cluster in pool 1 fails

  If an existing scheduled conference is set to start at, say 10:00 and 09:00 8710 at the Bridge Pool 1 cluster fails, conductor forward this conference automatically to the Bridge Pool 2?

  We all want CMR / appointment conferences to automatically use the default Bridge Pool 2 and don't use Bridge Pool 1 if the 8710 in Bridge Pool 2 fails.

  The above version works for my scenario?

  What you have above, is correct for the planning, see example 2 of the planning section of the examples of the conductor with the TMS Deployment Guide.  However, in the case of a failover bridge, TMS does not guarantee that there are enough resources as the secondary bridge is shared with the announcement of conferences ad hoc it is not enabled for the planning, so TMS will monitor not his ability to do that there are enough resources for scheduled conferences.

  Regarding your failover scenario, if a bridge fails, conductor detects this and start to use either the next bridge in the pool or service preferences.  I'm not sure of the time, but it will happen in a minute or two.

  However, you will need an additional service for RMC preference / conferences appointment containing the pools two bridge in order reverse just like what you listed, but in this case, none of the bridges will be marked for planning.

• TMS CCC and JAVA - Clarification

  I looked through the forums enough to know that MSD is VERY picky about the version of Java installed on the local computer used to access the control of conference center.

  Is there a definitive guide to which versions of Java work with which versions of TMS or how many installations of Java could affect this delicate balance? We got hell keeping Java Update while ensuring that we are able to access MSDS. In addition, in your personal experiences, which browsers you find work best with TMs?

  We run TMS 13.2.1 and usually access the CCC of machines Windows 7 x 64. Any clarification/help would be much appreciated.

  Hi Juan,

  The problem has been fixed on the side TMS in article 13.2.2. This is because the BUG # CSCub01168.

  Here is the excerpt of BUG # CSCub01168.

  [Java 7 introduced a defect (bug 6997116 ID in Java) which caused talks to conference control center is not to load.]

  This has been fixed in Java 7 7 update, but there are still problems loading of the images that have now been resolved with a change of function of rendering Java in Cisco TMS

  See here for article 13.2.2 software installation package and here for the release notes.

  TMS has only been tested with IE and Firefox.

  Please see the installation guide for TMS 14.1.

  http://www.Cisco.com/en/us/docs/Telepresence/infrastructure/TMS/Install_Guide/Cisco_TMS_install_guide_14-1.PDF

  BR/Mahesh Adithiyha

• HP 255 G4: Problem with Driver Usb

  Hi, I have a problem with my HP laptop. Two usb ports do not work because it is not the correct driver.

  Help, please!

  [Personal information]

  Product: M9T13EA #ABZ

  Good bye

  This problem is really stubborn...

  OK, time to pull out the artillery heavy.

  Download and install both of these drivers and reboot and see if that takes care of the issue.

  http://h20564.www2.HP.com/hpsc/SWD/public/detail?sp4ts.Oid=7834528 & swItemId = ob_154066_1 & swEnvOid = 4059

  http://h20566.www2.HP.com/hpsc/SWD/public/detail?sp4ts.Oid=6943835 & swItemId = ob_133037_1 & swEnvOid = 4059 #tab1

• Re: Error with driver Bluetooth Stack on protected Z830

  Error during installation of the Bluetooth stack for Windows 7 (version of 15/05/12): first pilot "Bluetooth USB controller-10" properly installed but the second a "Bluetooth RFBUS" fails.

  Therefore Bluetooth does not work. PC says that it is not enabled (with Fn + F8 or Bluetooth setting running)

  Note: the Atheros driver is up-to-date. I tried with and without the Bluetooth Driver filter Pack 1.0.9.

  What should I do?

  Thank you!

  PS: Protected Z830 PT224E with 64-bit windows 7

  Are you using the original preinstalled OS Hat you got with your Portege?

• Re: Cannot start with driver USB Satellite A40-271

  Hello

  I have a Toshiba Satellite A40-271 and there was a problem with windows and I can not start, so I decided to start with linux. I tried once with a cd and it worked perfectly, now I try with a usb flash pen and it does not work.

  Can someone help me?

  Hello

  As far as I know the Satellite A40 is very old model laptop and I think that the BIOS does not support booting from a USB flash memory
  I know it of possible to start the USB FDD drive

• What to do with driver downloads - SP 6100

  I have recently reinstalled Win XP on my Satellite Pro 6100. I downloaded the WiFi and the Toshiba SD reader drivers support website but can someone please tell me what to do with the files once extracted.
  Also, just because the laptop has the switch Wifi that means it is present?

  Thank you

  Gareth

  Hello Gareth

  Please check in Device Manager if the WiFi card is which are listed there. If you switch the WiFi switch on, the WLAN is led active?

  I didn t try it before but in my opinion you should extract the files to a folder. Put the SD card in the SD slot and if the new hardware is detected, follow the wizard for new equipment installations.

  Also try to install SD Host controller driver by using a right-click on the configuration information and choose the installation option. I really put t exactly how it works on this device, but I'm sure that you'll be able to install it correctly.

• Qosmio F60 - stop slower and a blue screen with driver out of State

  Hello
  I've only had the F60 for a few weeks and although it worked well for 2 weeks, 2 days has been a disaster. First AutoCAD crashes during startup and does not at all.
  So, my Outlook 2007 do not meet 1 / 3 times.
  Finally, whenever I stop, this is a very slow stop (10-20 minutes) and then blue screens, restarts and says that it is a driver fault status.

  Help - what someone else had these problems?

  You'll be lucky if someone else uses the same software as you and you can check this.
  My personal opinion is that all of the problems described are certainly software related issues.

  We do not know how you set up your laptop, what modules are preinstalled, software that runs in the background and all other important info is not easy to discuss these issues.

  I'm sure that you do not have these problems on the first day, right?

  I know you hate me now, but maybe you should back up all your important data and install the OS to help original Toshiba recovery image. After having this software to remove all the preinstalled you do not need (additional Toshiba stuff) and continue with the installation of Microsoft Office. Check the functionality and continue to install your favorite step by step software and watch carefully what happens.

  Also disable automatic Windows Update and change this option to check for updates but let me choose... option. So, you will have full control over updates.

• Problems with drive HARD Toshiba MK1234GSX

  Hello

  I have an Acer with a secondary HD TOSHIBA MK1234GSX 9920.
  Since I installed Windows 7, I have problems with the HD.
  Upon restart, the HD is considered as having problems with windows: when I look in device management, I have this message "Windows has stopped this device cause it has problems. (Code 43) »
  I did a full scan (chkdsk), but no not found errors.
  If I turn off the HD, reactivate and restart, sometimes I can access the HD which works perfectly.
  Does anyone have an idea on this?
  Thank you.

  PS: Sorry for my English :)

  CHKDSK is not good to test a HARD drive for bad sectors, its only good when looking for errors of the filesystem (FAT32 or NTFS).

  Test the hard drive to find errors using DFT.
  DFT download: http://www.hitachigst.com/hdd/support/download.htm#DFT

  Download the ISO file and burn it to a CD - R disc (there is also a version on disk if it's easier).
  If you don't know how to burn an ISO file, read this guide: http://www.petri.co.il/how_to_write_iso_files_to_cd.htm
  Restart your laptop and boot from the disc of DFT.
  Choose the 'Advanced' test and let it run (it may take an hour or two).
  If you see a message in red box, the HARD drive is faulty.
  An error code 0 x 70 means there are bad sectors and the HARD drive needs to be replaced.

• Serious problem with driver i810 Equium A100-306

  I have a new Equium A100-306 and I try to install two different Linux distributions:
  10.1 (x86_64) SUSE and BlueWhite64, but in both cases, I met the same problem:
  When you restart the Xserver, the computer stops responding.

  I used the i810.
  This is not the case with the vesa driver.

  lspci reports:
  00:00.0 Host bridge: Intel Corporation Mobile 945GM/PM/GMS/940GML and 945GT Express Memory Controller Hub (rev 03)
  00:02.0 VGA compatible controller: Intel Corporation Mobile 945GM/GMS/940GML Express Integrated Graphics Controller (rev 03)
  View 00:02.1 controller: Intel Corporation Mobile 945GM/GMS/940GML Express Integrated Graphics Controller (rev 03)

  Hello flora

  Before you wait here for a long time trial learn more about Toshiba Linux pages:
  http://www.Linux-laptop.NET/Toshiba.html
  http://Linux.Toshiba-DME.co.jp/Linux/index.htm
  http://newsletter.toshiba-tro.de/main/index.html

  Good luck!