tnsping is not running client 12.1

Similar Questions

• Core i7 - both vmware and hyper V not running any X 64 Machine virtual (X 32 VM Client works on vmware Xp/vista) built on Windows Server 2008 X 64 basic

  The vmware and hyper V not running any X 64 Machine virtual (X 32 VM Client works on vmware Xp/vista) built on Windows Server 2008 X 64 Basic.

  Windows (pre install UI) error code install (0xc000035a) that the processor does not support X 64 Mode

  Any of that with core i7 system any help would be much appreciated, thanks

  -Software VMware Server 2.0.0 122956 - OR - VMware Workstation 6.5.1 126130 - OR- Microsoft Hyper V

  -Tried - BONE at BASE of MATERIAL AND the VM ENVIRONMENT

  X 64 Windows Server 2008 6001 - OR - X 64 Windows Server 2008 6002 - OR - X 64 Server Windows 7 6801

  System - Core i7 920 + X 58 (GA-EX58-UD5) + 6 GB DDR3 + OCZ SSD

  Intel Core i7 920 Webpage - http://www.intel.com/products/processor_number/chart/corei7.htm

  Gigabyte GA-EX58-UD5 - latest version of the Bios F3

  Web page - http://www.gigabyte.com.tw/Products/Motherboard/Products_Spec.aspx?ClassValue=Motherboard & ProductID = 2958 & ProductName = GA-EX58-UD5

  Advanced features of MB Bios CPU - tried Both ON and OFF

  Hyper Threading - Threading 4 AND 8

  Intel Virtualization - ENABLE AND DISABLE

  Looked in the VM Bios as well

  6 GB DDR3 3X2GB 1600

  Please, see troubleshooting problems of Intel VT - x.

  Also note that you can not the role Hyper-V installed in the parent partition, if you want to run the VMware using VT products, as Hyper-V virtualizes the parent partition, but it only virtualizes the VT CPU features.

• Service Windows Update is not running - but it should!

  Windows 7 x 64.

  For 20 days, as far as I can see in the Application and Services > Windows Update, Windows Update Client did not work.

  I have no explanation.

  Whenever I try to start it manually, it argues that the service is not running. I'm not even sure that there should be a service called WindowsUpdate in services.msc, but in any case there isn't.

  And when I tried to get full support for my perfectly legitimate Microsoft online and paid for W7Pro he tells me some bull on the expired product ID?

  Help please?

  Info: AV is Eset Nod32 BEING v. 4, fully updated. Windows has been installed on a hard drive that is empty, no upgrade.

  Update stand-alone Wu

  FixIt50192

  FixIt50202

  That fixed it. He had been pretty with a FixIt, but I ran it. Is no evidence of any Virus.

  Cause of this still unknown.

• My computer is not running a version of Windows (Windows 7

  Separated from this thread.

  Hello

  Since a few days I also get the message that my computer is not running a version of Windows (Windows 7). It'Windows 7 Enterprise and we have a KMS host on our network. I checked on the spot and on the KMS host and Windows is successfully activated. I ran MGADiag:

  Diagnostic report (1.9.0019.0):
  -----------------------------------------
  Given WGA-->
  Validation status: genuine
  Validation code: 0

  Cached Validation code: n/a, hr = 0xc004f012
  Windows product key: *-* - 2VJC9 - XBBR8-HVTHH
  Windows product key hash: k/l/EMDQdwK9OvdCkPtHG1YdosE =
  Windows product ID: 00392-918-5000002-85135
  Windows product ID type: 1
  Windows license Type: customer KMS
  The Windows OS version: 6.1.7601.2.00010100.1.0.004
  ID: {B18119A5-53CF-4AB2-B6A4-EF24F5EB9024} (3)
  Admin: Yes
  TestCab: 0x0
  WGA Version: N/a, hr = 0 x 80070002
  Signed by: n/a, hr = 0 x 80070002
  Product name: Windows 7 Enterprise
  Architecture: 0 x 00000009
  Build lab: 7601.win7sp1_gdr.150427 - 0707
  TTS error:
  Validation of diagnosis:
  Resolution state: n/a

  WgaER data-->
  ThreatID (s): n/a, hr = 0 x 80070002
  Version: N/a, hr = 0 x 80070002

  WGA Notifications data-->
  Cached result: n/a, hr = 0 x 80070002
  File: No.
  Version: N/a, hr = 0 x 80070002
  WgaTray.exe signed by: n/a, hr = 0 x 80070002
  WgaLogon.dll signed by: n/a, hr = 0 x 80070002

  OGA Notifications data-->
  Cached result: n/a, hr = 0 x 80070002
  Version: N/a, hr = 0 x 80070002
  OGAExec.exe signed by: n/a, hr = 0 x 80070002
  OGAAddin.dll signed by: n/a, hr = 0 x 80070002

  OGA data-->
  Office status: 109 n/a
  OGA Version: N/a, 0 x 80070002
  Signed by: n/a, hr = 0 x 80070002
  Office Diagnostics: 025D1FF3-364-80041010_025D1FF3-229-80041010_025D1FF3-230-1_025D1FF3-517-80040154_025D1FF3-237-80040154_025D1FF3-238-2_025D1FF3-244-80070002_025D1FF3-258-3

  Data browser-->
  Proxy settings: N/A
  User Agent: Mozilla/4.0 (compatible; MSIE 8.0; Win32)
  Default browser: C:\Program may Explorer\iexplore.exe
  Download signed ActiveX controls: fast
  Download unsigned ActiveX controls: disabled
  Run ActiveX controls and plug-ins: allowed
  Initialize and script ActiveX controls not marked as safe: disabled
  Allow the Internet Explorer Webbrowser control scripts: disabled
  Active scripting: allowed
  Recognized ActiveX controls safe for scripting: allowed

  Analysis of file data-->

  Other data-->
  Office details: {B18119A5-53CF-4AB2-B6A4-EF24F5EB9024}1.9.0019.06.1.7601.2.00010100.1.0.004x 64*-*-*-*-HVTHH00392-918-5000002-851351S-1-5-21-1641470721-628834375-4120914880Dell Inc.. E5540 Latitude Dell Inc.. A06 20140501000000.000000 + 00016AC3307018400FC04130409Europe West Standard Time(GMT+01:00)13DELL CBX3 109

  Content Spsys.log: 0 x 80070002

  License data-->
  The software licensing service version: 6.1.7601.17514

  Name: Microsoft(r) Windows(r) 7, Enterprise edition
  Description: operating system Windows - Windows (r) 7, VOLUME_KMSCLIENT channel
  Activation ID: ae2ee509-1b34-41c0-acb7-6d4650168915
  ID of the application: 55c92734-d682-4d71-983e-d6ec3f16059f
  Extended PID: 00392-00170-918-500000-03-1033-7601.0000-3302014
  Installation ID: 015011933405421291189261946141904156228985935273896085
  Partial product key: HVTHH
  License status: licensed
  Volume activation expiration: 252060 minute (s) on (175 day (s))
  Remaining Windows rearm count: 1
  Trust time: 06/02/2015 12:34

  Customer Service key management information
  Client machine ID (CMID): 0fd91054-47f2-44fd-bb40-390d790e92bb
  The KMS computer DNS name:
  KMS machine extended PID: 55041-00168-314-228432-03-2057-7600.0000-2282012
  Activation interval: 120 minutes
  Renewal interval: 10080 minutes
  Cached KMS host is activated

  Windows Activation Technologies-->
  HrOffline: 0x8004FE22
  HrOnline: 0x00000000
  Beyond: 0 x 0000000000000800
  Event timestamp: 6:1:2015 12:06
  WAT Activex: registered
  WAT administration service: registered

  --> HWID data
  Current Hash HWID: MgAAAAEAAAABAAIAAgABAAAAAwABAAEAln2IZ05dRneEVQJaQJG2Y2b2zLl + Oqhouno =

  Activation 1.0 data OEM-->
  N/A

  Activation 2.0 data OEM-->
  BIOS valid for OA 2.0: Yes
  Windows marker version: 0 x 20001
  OEMID and OEMTableID consistent: Yes
  BIOS information:
  ACPI Table name OEMID value OEMTableID value
  APIC DELL CBX3
  FACP DELL CBX3
  HPET DELL CBX3
  MCFG DELL CBX3
  DELL CBX3 FPDT
  CBX3 DELL SLIC
  LPIT DELL CBX3
  SSDT INTEL sensrhub
  SSDT INTEL sensrhub
  SSDT INTEL sensrhub
  SSDT INTEL sensrhub
  SSDT INTEL sensrhub
  ASF! INTEL HCG
  MSDM DELL CBX3
  LAURENCE INTEL HSW

  Also checked the regkeys:

  c:\>reg QUERY HKLM\SOFTWARE\Classes\Wow6432Node\TypeLib\ {EE574957-4077-4AD6-8658
  -327C2C86C5AA} /S

  HKEY_LOCAL_MACHINE\SOFTWARE\Classes\Wow6432Node\TypeLib\ {EE574957-4077-4AD6-8658
  -327C2C86C5AA} \1.0
  (Default)    REG_SZ SPPUI 1.0 Type Library

  HKEY_LOCAL_MACHINE\SOFTWARE\Classes\Wow6432Node\TypeLib\ {EE574957-4077-4AD6-8658
  -327C2C86C5AA}\1.0\0

  HKEY_LOCAL_MACHINE\SOFTWARE\Classes\Wow6432Node\TypeLib\ {EE574957-4077-4AD6-8658
  -327C2C86C5AA}\1.0\0\win32
  (Default)    REG_EXPAND_SZ %SystemRoot%\System32\slui.exe

  HKEY_LOCAL_MACHINE\SOFTWARE\Classes\Wow6432Node\TypeLib\ {EE574957-4077-4AD6-8658
  -327C2C86C5AA}\1.0\FLAGS
  (Default)    REG_SZ 0

  c:\>reg QUERY HKLM\SOFTWARE\Classes\TypeLib\ {EE574957-4077-4AD6-8658-327C2C86C5A
  AT} /S

  HKEY_LOCAL_MACHINE\SOFTWARE\Classes\TypeLib\ {EE574957-4077-4AD6-8658-327C2C86C5A
  AT} \1.0
  (Default)    REG_SZ SPPUI 1.0 Type Library

  HKEY_LOCAL_MACHINE\SOFTWARE\Classes\TypeLib\ {EE574957-4077-4AD6-8658-327C2C86C5A
  A} \1.0\0

  HKEY_LOCAL_MACHINE\SOFTWARE\Classes\TypeLib\ {EE574957-4077-4AD6-8658-327C2C86C5A
  A}\1.0\0\win32
  (Default)    REG_EXPAND_SZ %SystemRoot%\System32\slui.exe

  HKEY_LOCAL_MACHINE\SOFTWARE\Classes\TypeLib\ {EE574957-4077-4AD6-8658-327C2C86C5A
  A}\1.0\FLAGS
  (Default)    REG_SZ 0

  c:\>reg QUERY HKLM\SOFTWARE\Wow6432Node\Classes\TypeLib\ {EE574957-4077-4AD6-8658
  -327C2C86C5AA} /S

  HKEY_LOCAL_MACHINE\SOFTWARE\Wow6432Node\Classes\TypeLib\ {EE574957-4077-4AD6-8658
  -327C2C86C5AA} \1.0
  (Default)    REG_SZ SPPUI 1.0 Type Library

  HKEY_LOCAL_MACHINE\SOFTWARE\Wow6432Node\Classes\TypeLib\ {EE574957-4077-4AD6-8658
  -327C2C86C5AA}\1.0\0

  HKEY_LOCAL_MACHINE\SOFTWARE\Wow6432Node\Classes\TypeLib\ {EE574957-4077-4AD6-8658
  -327C2C86C5AA}\1.0\0\win32
  (Default)    REG_EXPAND_SZ %SystemRoot%\System32\slui.exe

  HKEY_LOCAL_MACHINE\SOFTWARE\Wow6432Node\Classes\TypeLib\ {EE574957-4077-4AD6-8658
  -327C2C86C5AA}\1.0\FLAGS
  (Default)    REG_SZ 0

  Also checked the Windows Activation connects:

  Log name: Application

  Source: Windows Activation Technologies

  Date: 27/05/2015-07:46:37

  Event ID: 10

  Task category: no

  Level: Information

  Keywords: Classic

  User: n/a

  Computer:

  Description:

  Genuine validation initiated.

  Log name: Application

  Source: Windows Activation Technologies

  Date: 27/05/2015-07:46:44

  Event ID: 1

  Task category: no

  Level: Information

  Keywords: Classic

  User: n/a

  Computer:

  Description:

  Health check initiated.

  Log name: Application

  Source: Windows Activation Technologies

  Date: 27/05/2015-07:46:45

  Event ID: 3

  Task category: no

  Level: error

  Keywords: Classic

  User: n/a

  Computer:

  Description:

  Health check failed:

  HR = 0x8004FE22, beyond: 0 x 0000000000000800

  Log name: Application

  Source: Windows Activation Technologies

  Date: 27/05/2015-07:46:45

  Event ID: 5

  Task category: no

  Level: Information

  Keywords: Classic

  User: n/a

  Computer:

  Description:

  Healing process began.

  Log name: Application

  Source: Windows Activation Technologies

  Date: 27/05/2015-07:46:45

  Event ID: 7

  Task category: no

  Level: WARNING

  Keywords: Classic

  User: n/a

  Computer:

  Description:

  Result of the healing process:

  HR = 0x8004FE22, beyond: 0 x 0000000000000800

  Log name: Application

  Source: Windows Activation Technologies

  Date: 27/05/2015-07:46:45

  Event ID: 13

  Task category: no

  Level: Information

  Keywords: Classic

  User: n/a

  Computer:

  Description:

  Result of the genuine validation:

  hrOffline = 0x8004FE22, hrOnline = 0 x 00000000

  I haven't added any hardware lately, so I don't really have any idea why this is happening all of a sudden.

  Almost forgot to mention, the last days I'm on another Site of our society and it seems that some users more have this problem here.

  At the beginning we had some problems with rogue KMS hosts (clients installed with the wrong key, and then they began to behave like a KMS host), but this has been fixed.

  I see activation all requests come to the KMS host.

  Someone at - it an idea?

  Kind regards

  Mario

  It's the source of your problem

  Windows Activation Technologies-->
  HrOffline: 0x8004FE22
  HrOnline: 0x00000000
  Beyond: 0 x 0000000000000800
  Event timestamp: 6:1:2015 12:06
  WAT Activex: registered
  WAT administration service: registered

  With luck, validate the installation using Internet Explorer to www.microsoft.com/genuine/validate simply deletes this error and the machine turns real new.

• I have a new HP Envy with Windows 8 desktop computer that still does not run properly. I rebooted, restored, ran chkdsk, sfc/scannow, uninstall/install update etc...

  I have a new HP Envy with Windows 8 desktop computer that still does not run properly. I have rebooted, restored (im doing this), ran chkdsk, sfc/scannow, malware, virus, uninstall/install etc and my machine wil always do not run for a long time without going through some sort of problem after an hour or two.  Can anyone suggest what to do about this? I read a lot of information online on all the windows 8 and fixes bugs, etc, but anything Microsoft/Windows, which ensures its customers, a hotfix or compesating their customers with software that still works. This isn't a hardware problem, and I can't keep day and bad shooting and trying to fix the day things in?

  Sincerely,
  A client who is a loss for words.
  Here are some problems in no particular order.
  1.) apps to not install it, and/or Windows saying they are when they are in fact not. The fix to install / uninstall, or get on the site of windows directly in general does not, and or does not at all.
  The change permissions 2.) does not work on files that you should be able to access in changing oxnership, permissions, etc.
  3.) Google chrome won't let me access my account of microsoft (or fact rarely) trying to access assistance. But internet Explorer doesn't?
  Randomly will increase from Internet 4.) a previous connection wired to wireless to a reboot.
  5.) my 8 'key' windows was only shown to me after that I have let Windows scan my machine online? Why? I paid for this... I restarted it and it says: service not available (it worked the third attempt which was 1-3 minutes after the initial analysis). Windows only showed my product ID not the key. I know that my victory. 8 was OEM when preinstalled I bought it new, but why didn't we files on it that had nothing to do with activation, appearing on dates for three weeks, or so before I bought it. What is the 'activation of the factory'?
  6 :) Windows Essentials does not hang for a long time, and the troubleshooterprogram of update simply does not work (I had to go to the website to try tp operate, the bluetooth functionality is not good that there is an error.
  7.) windows scan and repair gets stuck at 27% (Im not the only one with this problem).
  8.), avery MS Office 2013 Disappears so often and not easy to reload "we have encountered a problem.
   

  The computer manufacturer is responsible to see that it works properly with Windows 8. It says that it is a new computer I contact HP and make these problems their. If you don't get satisfactory results I turn and look elsewhere for a computer. Hope this helps and if you need another post to help and we will be happy to help you.

  The above opinion is mine and mine nothing and does not necessarily reflect that of Microsoft, it's employees, or any other Member of this forum.

  "When we try to take anything by itself, we find it hitched to everything else in the universe." -John Muir

• Cannot start the unit because the authorization service is not running - cannot start service

  I'm weirded out. When I try to start the unit on my VM, I get the following message:

  The Virtual Machine cannot be set to Unity mode because:
  -The VMWare authorization Service is not running.

  So, after a little checking, I realize that indeed, the authorization Service is not running on my host. I am trying to launch and get the following message (translated from the french, sorry):

  Windows cannot start the VMWare authorization on your local server. For more information, see Event Viewer. If this isn't a Microsoft service, contact your service provider indicating the service specific error code: 6000002.

  Event Viewer is a little more detailed... But not really useful:

  Unable to retrieve the token for the user to VMware: unknown error 1385 (0 x 569) (1385)

  NONE of these error messages to display more than a few visits on Google, especially not in exact search (with quotes around the exact phrase) mode. I'm at a loss as to what I can operate the unit.

  Technical details:

  Host: Windows XP SP3 (French)

  Dell Optiplex 760, Intel Core 2 Duo E8600 @ 3.33 GHz. 3 GB of Ram.

  VMWare: 7.0.0 build-203739

  Client: Windows XP SP3 (English)

  I have attached my log of vmware just in case. Will be extremely grateful for any help!

  Thank you!

  The only other thing I can think is a reinstallation of the vmx86 service. Rerun the batch previously posted like this, with the extreme detail;

  Tracking Add "HKLM\SOFTWARE\VMware, Inc." /v loglevel /f /t REG_DWORD /d 0 x 36

  "%programfiles%\vmware\vmware workstation\vnetlib.exe" - stop vmx86

  "%programfiles%\vmware\vmware workstation\vnetlib.exe" - uninstall vmx86

  "%programfiles%\vmware\vmware workstation\vnetlib.exe" - install vmx86

  "%programfiles%\vmware\vmware workstation\vnetlib.exe" - beginning vmx86

  Tracking Add "HKLM\SOFTWARE\VMware, Inc." /v loglevel /f /t REG_DWORD /d 0 x 3

  and repeat once more for authd thereafter;

  Tracking Add "HKLM\SOFTWARE\VMware, Inc." /v loglevel /f /t REG_DWORD /d 0 x 36

  "%programfiles%\vmware\vmware workstation\vnetlib.exe" - stop authd

  "%programfiles%\vmware\vmware workstation\vnetlib.exe" - uninstall authd

  "%programfiles%\vmware\vmware workstation\vnetlib.exe" - install authd

  "%programfiles%\vmware\vmware workstation\vnetlib.exe" - beginning authd

  Tracking Add "HKLM\SOFTWARE\VMware, Inc." /v loglevel /f /t REG_DWORD /d 0 x 3

  If this does not help I suggest you reinstall workstation completely from your own account. Don't forget to note your serial number if your IT Department has already given it you.

  Joakim

  BTW, it might be that your group policy to prevent something. Check with your IT, if others have the same problem.

• LOGFF triger does not run when customers end abnormally

  Here's a triger to logoff:
  
  create or replace TRIGGER scott.before_logoff_trg
  before logoff ON database
  declare
  ......
  
  If customers come out normally, it is executed (just delete some rows in a table). But if the customers is crushed, the triger will not run.
  
  Is there a way I can run code pl/sql, when a client log normal or abnormal?

  BluShadow wrote:

  EdStevens wrote:

  Antares wrote:
  Thanks for your response!

  I'm working on an application for the edition of map of GIS, which should allow several users to edit the same map. Client A and B change the different parts of the map, but that they would like to see the result of the other. Change operations are stored which will be inserted in the staging table. When a customer edit, he must choose to save or ignore for this time editing operations. If he has abandon the changes, it has no impact on others, because these changes are useful for others, but not very important.

  No effect? Unless Customer B made a decision based on what he saw of A, make a change based on what he saw of A, so he saw has went, destroy the basis of its decision and action...

  Well Yes, as I said above...

  Which suggests that client B can act on something that is not yet truly engaged in the process of the company. This sounds like a serious gap in the business process and therefore the database design.

  Yes, it seems that the question should the cropping - how to allow collaborative editing of GIS data within maps that allows changes to be resistant and modified before to be published?

  This sounds like the O/P is in need of a kind of shared workspace that can be superimposed on an existing map changes without making public changes. The workspace must be shared between multiple users at the same time. Turns in the workspace would be committed and those changes, once accepted (and closed maybe?) must be published in the underlying plan so that everyone can see. If they are not published, they remain in the workspace.

  The idea of catering to an abnormal termination seems largely unnecessary if there is a concept of workspace. If a user ends abnormally, when they reconnect, they may choose to reuse the existing workspace or create a new. The old workspaces that have not been touched for x time could be archived or purged.

  This does not seem withdrawn too far from what the op said here...

  Change operations are stored which will be inserted in the intermediate table

  He thinks that it is mainly a question of changing the process...

  Published by: Bravid on March 7, 2012 15:49

• How to live a database, if not running, if not enrolled in the Listener.or

  Dear gurus.
  God bless you all.
  
  I am facing the problem that my database is not running. I always had this problem. ORA-12505 TNS-Listener could not resolve SID in connect descriptor.
  My Listener.ora and Tnsnames .ora files are like here.
  
  listener.ora # Network Configuration file: E:\oracle\product\10.2.0\db_1\network\admin\listener.ora
  # Generated by Oracle configuration tools.
  
  SID_LIST_LISTENER =
  (SID_LIST =
  (SID_DESC =
  (SID_NAME = PLSExtProc)
  (ORACLE_HOME = E:\oracle\product\10.2.0\db_1)
  (= Extproc PROGRAM)
  )
  )
  
  LISTENER =
  (DESCRIPTION_LIST =
  (DESCRIPTION =
  (ADDRESS = (PROTOCOL = TCP) (HOST = OraServer.lan)(PORT = 1521))
  )
  )
  
  ****
  LISTENING PORT. ORA.
  listener.ora # Network Configuration file: E:\oracle\product\10.2.0\db_1\network\admin\listener.ora
  # Generated by Oracle configuration tools.
  
  listener.ora # Network Configuration file: E:\oracle\product\10.2.0\db_1\network\admin\listener.ora
  # Generated by Oracle configuration tools.
  
  SID_LIST_LISTENER =
  (SID_LIST =
  (SID_DESC =
  (SID_NAME = PLSExtProc)
  (ORACLE_HOME = E:\oracle\product\10.2.0\db_1)
  (= Extproc PROGRAM)
  )
  )
  
  LISTENER =
  (DESCRIPTION_LIST =
  (DESCRIPTION =
  (ADRESSE = (PROTOCOL = TCP) (HOST = OraServer.lan)(PORT = 1521)) *)
  )
  
  **************
  Mr President, I have repeatedly changed like that (host = 192.168.1.70) but to no avail.
  Whenever I create a new listening port, it automatically takes (Host = Server.lan) why?
  **************
  Here is the
  
  Status of the listener:
  Microsoft Windows XP [Version 5.1.2600]
  Copyright (C) 1985-2001 Microsoft Corp.
  
  C:\Documents and Settings\nom > lsnrctl
  
  LSNRCTL for 32-bit Windows: Version 10.2.0.1.0 - Production on March 13, 2011 12:38
  : 21
  
  Copyright (c) 1991, 2005, Oracle. All rights reserved.
  
  Welcome to LSNRCTL, enter 'help' for more information.
  
  LSNRCTL > status
  Connection to (DESCRIPTION = (ADDRESS = (PROTOCOL = TCP)(HOST=192.168.1.70) (PORT = 1521)
  ))
  STATUS of the LISTENER
  ------------------------
  Alias LISTENER
  Version TNSLSNR for 32-bit Windows: Version 10.2.0.1.0 - production
  ction
  Start date March 13, 2011 12:14
  Uptime 0 days 0 h 24 min 27 sec
  Draw level off
  Security ON: OS Local Authentication
  SNMP OFF
  Listener parameter File E:\oracle\product\10.2.0\db_1\network\admin\listener.o
  RA
  Listener log file E:\oracle\product\10.2.0\db_1\network\log\listener.log
  
  Summary of endpoints listening...
  (DESCRIPTION = (ADDRESS = (PROTOCOL = tcp)(HOST=192.168.1.70) (PORT = 1521)))
  Summary of services...
  Service 'PLSExtProc' has 1 instance (s).
  Instance of 'PLSExtProc', status UNKNOWN, has 1 operation for this service...
  The command completed successfully
  ******
  Status of services:
  LSNRCTL > services
  Connection to (DESCRIPTION = (ADDRESS = (PROTOCOL = TCP)(HOST=192.168.1.70) (PORT = 1521)
  ))
  Summary of services...
  Service 'PLSExtProc' has 1 instance (s).
  Instance of 'PLSExtProc', status UNKNOWN, has 1 operation for this service...
  Managers:
  "DEDICATED" set up: 0 denied: 0
  LOCAL SERVER
  The command completed successfully.
  
  *****************************
  U please justify it is that my database is in place, proper running.
  I'm unable to connect to SQLPLUS / NoLOG command prompt.
  Error meesage came that TNS could not connect to the destination.
  
  *************
  
  Please do hurrry.
  
  Thank you.
  
  
  Abbas

  So why you use 8.0.6 client?

  You have installed Forms 6i or something like that on your machine? That's the only reason why I can imagine for this old software.

  In a command window:

  Set ORACLE_HOME=E:\oracle\product\10.2.0\db_1
  Set ORACLE_SID =

  In the variable PATH check E:\oracle\product\10.2.0\db_1\bin comes first or directly call sqlplus

  E:\oracle\product\10.2.0\db_1\bin

  sqlplus / as sysdba
  startup

• Purchase Apple Store app will not run. It keeps freezing at the top. Help please what I do

  I bought an app and the application will not run. It keeps freezing at the top. He asks me on a plus to enter info Apple then he said I bought it but will not open the app

  Delete the app first, only then it re-download again.

  If not, try these standard troubleshooting steps.

  Reset: hold the Home and Power buttons until you see the Apple logo (10 to 20 seconds).

  If this does not help, you may need to restore your iPhone.

  https://support.Apple.com/en-us/HT204184

  If your backup in iTunes, make sure that it is an encrypted backup.

• Updated to the latest version. Now that firefox is not running.

  dated firefox now firefox will not run.
  Have to use the dreaded IE for that matter.

  The point on the issue. Need to do a restart and FIrefox now works. GO figure. Problem solved.

• Applications are not running correctly

  I installed the iOS Update 9 and therefore count my applications do not run the way they were accustomed to, something fishy is going on in the back end, I guess. If anyone has an idea about this then please let me know. I need your help

  Hi Shayadri!

  I understand that your applications do not work properly after installing iOS 9.  I understand how important it is to have your apps working correctly, and I am pleased to offer you some advice.  Please try all the tips in this article to support, and if you're still having problems with third-party applications, you will see instructions to contact the developer of the application of aid.

  If an application you have installed unexpectedly closes, unresponsive, or does not open

  Thank you for using communities of Apple Support.

  See you soon!

• I have the latest version of Java and the addin card is not there. I have a mac. I'm not running on 32-bit. I had so many problems with this new java updat

  I have updated java 7 up to 45 (by mistake, this version of java does not work with vpn and according to apple, I can't revert to the previous version). The applet plugin does not appear in my Add ons. I'm not running 32-bit. I have read and tried every article I can find. I uninstalled and reinstalled still no luck. I have an iMac, just put update to maverick.

  See if anything here is useful:

  • http://KB.mozillazine.org/Java#If_the_Java_plugin_does_not_appear_in_the_Add-ons_Manager_even_though_Java_is_installed

• Firefox 17.0.1.4715 currently running on Windows XP SP3, I was asked to upgrade to Firefox 18, ran the update, asked to restart, gotten no restart and can not run Firefox

  Installation has been apparently successfully, I got a prompt to reboot and says OK. Firefox 17 closed, but there is no restart. Attempts to launch Firefox to icons or start menu get no reaction.

  The Firefox.exe in Program Files is the 17.0.1.4715 version. It will not run.

  Avast antivirus (but I did a lot of Firefox updates before this installation and no conflict).

  on this site, you can choose a download to the location you want: https://www.mozilla.org/en-US/firefox/all/ (again, it just to install on top of your current version and it will replace it)

• Re: Driver for Toshiba system do not run after instalation

  Toshiba system driver not running after instalation in 64-bit windows 8

  Please post more information. Model of laptop, OS, what you're doing and which driver exactly make trouble.

• Print Spooler service is not running

  I'm trying to re - install my printer, but I get a message that says "operation could not be performed. Print Spooler service is not running.

  Hi pyq718,

  Follow the steps below to check the print spooler.

  1. type services.msc in run (XP) or search programs and files (Win 7 and Vista)

  2. click on the (local) Service

  3. scroll down until you get to the print spooler, and then click on it once to select it.

  4. in the top left corner, you can stop and then start the spooler to make sure it is running.