To access the fields of CRM customized by using {module_data}?

Similar Questions

• Not able to see the fields within a custom resources optimization

  Hi all

  I am not able to see the fields within a custom value.

  Here is my code for the custom resource optimization:

  public class CustomContentContainer extends VerticalFieldManager{
  
      String content_header;
      int container_height;
      int displayWidth = Display.getWidth();
      int displayHeight = Display.getHeight();
  
      public CustomContentContainer(String content_header,int height){
          super(Manager.NO_VERTICAL_SCROLL | Manager.NO_HORIZONTAL_SCROLL);
          this.content_header = content_header;
          container_height = displayHeight-height;
      }
  
      protected void sublayout(int maxWidth, int maxHeight) {
          super.sublayout(maxWidth, container_height);
          setExtent(maxWidth,container_height);
      };
  
      protected void paint(Graphics graphics)
      {
          int X_POS = 20;
          int Y_POS = 20;
  
          int width = displayWidth;
          int height=container_height;
          int[] xPts = {0, width, width, 0};
          int[] yPts = {0, 0, height, height};
          int[] colors = { 0xffffff, 0xf7f7f6, 0xd4d0cc, 0xb0a9a2 };
          graphics.drawShadedFilledPath(xPts, yPts, null, colors, null);
  
          graphics.setColor(0xc0c0c0);
          graphics.drawRoundRect(X_POS, Y_POS, getWidth()-40, container_height-40, 10,10);
  
          int stringWidth = getFont().getAdvance(content_header);
          graphics.setColor(0xF8F8F8);
  
          graphics.fillRect(35, 5, stringWidth+10, 30);
  
          graphics.setColor(0xFF0000);
          graphics.drawText(content_header, 40, 5);
      };
  
  }
  

  Here is the Code inside the class from the main screen

  settingsContainer = new CustomContentContainer("Settings",vodavaultLogo.getHeight());
          contentContainer = new VerticalFieldManager(Manager.VERTICAL_SCROLL|USE_ALL_WIDTH);
  
          passwd1 = new CustomEditField();
          passwd2 = new CustomEditField();
          contentContainer.add(passwd1);
          contentContainer.add(passwd2);
          contentContainer.setMargin(35,35,35,35);
  
          mainContainer.add(vodavaultLogoField);
          settingsContainer.add(contentContainer);
          mainContainer.add(settingsContainer);
          add(mainContainer);
  

  You must call the super.paint (.) in your paint (...) optimization of resources, if you paint all areas which are added.

• I want to send an email manually with the fields email drives custom object? Is this possible?

  I want to send an email manually with the fields email drives custom object? Is this possible?

  Hey,.

  Yes, however, the object record Email custom fields only fill with default values. For the custom field object Record is filled, it must be sent via the event Actions or a generating program so that he knows in which case it is associated.

  Thank you...

• System 32 error (0x00000020): "the process cannot access the file because it is being used by another process.". The operation to open the file will fail with error - 1032 (0xfffffbf8(JET_errFileAccessDenied))"

  Original title: svchost (1020)

  Event type: error
  Event source: ESENT
  Event category: general
  Event ID: 490
  Date: 2010-10-19
  Time: 14:51:34
  User: n/a
  Computer: ROB
  Description:
  Svchost (1020) an attempt to open the file "C:\WINDOWS\system32\CatRoot2\{127D0A1D-4EF2-11D1-8608-00C04FC295EE}\catdb" for read / write access failed with the error System 32 (0x00000020): "the process cannot access the file because it is being used by another process.".  The operation to open the file will fail with error - 1032 (0xfffffbf8(JET_errFileAccessDenied)).

  For more information, see Help and Support Center at http://go.microsoft.com/fwlink/events.asp.

  Hi Robrw,

  1. when exactly you receive this error?

  2. don't you make changes to the computer before this problem?

  You can try to rename the catroot2 folder and check if it helps.

  Step 1:

  a. Click Start and in run type C:\windows\system32 and click ok

  b. find the Catroot2 folder. Right-click on Catroot2 and rename it to Catroot2.old

  If you are not able to do the normal mode, try to start in safe mode and rename

  Check out the link for more information on starting your computer in SafeMode below:

  http://support.Microsoft.com/kb/315222

  Step 2:

  If you are unable to access the catroot2 folder, and then try to change the permissions on the files and check if it helps.

  See the following article:

  How to capture a file or a folder in Windows XP

  http://support.Microsoft.com/kb/308421

  Step 3:

  You can also try to temporarily disable third-party security software and firewalls and check what is happening.

  Note: Activate the security software after the resolution of the problem.

  Hope this information is useful.

  Jeremy K
  Microsoft Answers Support Engineer
  Visit our Microsoft answers feedback Forum and let us know what you think.

  If this post can help solve your problem, please click the 'Mark as answer' or 'Useful' at the top of this message. Marking a post as answer, or relatively useful, you help others find the answer more quickly.

• Error: "the process cannot access the file because it is being used by another process." when treid to install the device driver

  Original title: Windows cannot install the drivers

  I had a lot of trouble installing the drivers on my Windows computer.  I went straight in the Device Manager and deleted the devices I tried to install and reinstalled them, I went into safe mode, I got Windows to run the console and only the basic process and run from there Device Manager... no matter what I do the same mistake.

  "The process cannot access the file because it is being used by another process".

  Even after a restore of the system, he did this, and I don't know what to do anymore.  Only devices that have been previously installed work.

  What's more important install my Blackberry software because my phone is broken.  The software cannot detect my phone because the drivers have not been installed.  Most of the devices I can use with Linux (I have Windows Vista and Ubuntu running on the same computer), but RIM don't make Blackberry for Linux software, so I have to do it on Windows.

  Hi paco2012,
   
  1. did you of recent changes on the computer?
  2. how many user accounts you have on the computer?
   
  Try these steps and check the result.
  Step 1: Install the driver as an administrator
  a. shut down the computer runs.
  b. start the computer and the connection as an administrator.
  c. find the driver configuration file, right-click on the file and click "Run as Administrator".
  d. follow the instructions in the wizard to install the driver.
  e. restart the computer once the driver is installed.
   
  Step 2: Try to install the driver to boot either by disabling all non-Microsoft programs
  a. open the article: http://support.microsoft.com/kb/929135
  b. Article, follow "step 1: perform a clean boot."
  c. restart the computer.
  d. install the driver and verify the result.
  e. follow "step 7: reset the computer to start as usual.
   
  Kind regards
  Syed - Microsoft technical support.
  Visit our Microsoft answers feedback Forum and let us know what you think.

• RunDLL__Error C:\windows\system32\sshnas.dll___The loading process cannot access the file because it is being used by another process.

  When I start windows Vista, I get the error message:

  RunDLL
  Error loading C:\windows\system32\sshnas.dll

  The process cannot access the file because it is being used by another process.

  How can I fix?

  Hello

  It is the result of malware, then do a very thorough check and when the system is
  clean see the following message to remove this error.

  If you need search malware here's my recommendations - they will allow you to
  scrutiny and the withdrawal without ending up with a load of spyware programs running
  resident who can cause as many questions as the malware and may be more difficult to detect as the
  cause.

  No one program cannot be used to detect and remove any malware. Added that often easy
  to detect malicious software often comes with a much harder to detect and remove the payload. Then
  its best to be thorough than paying the high price later now too. Check with them to one
  extreme overkill point and then run the cleaning only when you are sure that the system is clean.

  It can be made repeatedly in Mode safe - F8 tap that you start, however, you must also run
  the regular windows when you can.

  Download malwarebytes and scan with it, run MRT and add Prevx to be sure that he is gone.
  (If Rootkits run UnHackMe)

  Download - SAVE - go to where you put it-right on - click RUN AS ADMIN

  Malwarebytes - free
  http://www.Malwarebytes.org/products/malwarebytes_free

  Run the malware removal tool from Microsoft

  Start - type in the search box-> find MRT top - right on - click RUN AS ADMIN.

  You should get this tool and its updates via Windows updates - if necessary, you can
  Download it here.

  Download - SAVE - go to where you put it-right on - click RUN AS ADMIN
  (Then run MRT as shown above.)

  Microsoft Malicious - 32-bit removal tool
  http://www.Microsoft.com/downloads/details.aspx?FamilyId=AD724AE0-E72D-4F54-9AB3-75B8EB148356&displaylang=en

  Microsoft Malicious removal tool - 64 bit
  http://www.Microsoft.com/downloads/details.aspx?FamilyId=585D2BDE-367F-495e-94E7-6349F4EFFC74&displaylang=en

  also install Prevx to be sure that it is all gone.

  Download - SAVE - go to where you put it-right on - click RUN AS ADMIN

  Prevx - Home - free - small, fast, exceptional CLOUD protection, working with others
  security programs. It is a single scanner, VERY EFFICIENT, if it finds something to come back
  here or use Google to see how to remove.
  http://www.prevx.com/   <-->
  http://info.prevx.com/downloadcsi.asp?prevx=Y  <-->

  Choice of PCmag editor - Prevx-
  http://www.PCMag.com/Article2/0, 2817,2346862,00.asp

  Try the demo version of Hitman Pro:

  Hitman Pro is a second scanner reviews, designed to save your computer from malicious software
  (viruses, Trojans, rootkits, etc.). who infected your computer despite safe
  what you have done (such as antivirus, firewall, etc.).
  http://www.SurfRight.nl/en/hitmanpro

  --------------------------------------------------------

  If necessary here are some free online scanners to help the

  http://www.eset.com/onlinescan/

  -----------------------------------

  Original version is now replaced by the Microsoft Safety Scanner
  http://OneCare.live.com/site/en-us/default.htm

  Microsoft safety scanner
  http://www.Microsoft.com/security/scanner/en-us/default.aspx

  ----------------------------------

  http://www.Kaspersky.com/virusscanner

  Other tests free online
  http://www.Google.com/search?hl=en&source=HP&q=antivirus+free+online+scan&AQ=f&OQ=&AQI=G1

  --------------------------------------------------------

  Also follow these steps for the General corruption of cleaning and repair/replace damaged/missing
  system files.

  Run DiskCleanup - start - all programs - Accessories - System Tools - Disk Cleanup

  Start - type this into the search-> find COMMAND to top box and RIGHT CLICK-
  RUN AS ADMIN

  Enter this at the command prompt - sfc/scannow

  How to analyze the log file entries that the Microsoft Windows Resource Checker
  (SFC.exe) program generates in Windows Vista cbs.log
  http://support.Microsoft.com/kb/928228

  Run checkdisk - schedule it to run at the next startup, then apply OK then restart your way.

  How to run the check disk at startup in Vista
  http://www.Vistax64.com/tutorials/67612-check-disk-Chkdsk.html

  -----------------------------------------------------------------------

  If we find Rootkits use this thread and other suggestions. (Run UnHackMe)

  http://social.answers.Microsoft.com/forums/en-us/InternetExplorer/thread/a8f665f0-C793-441A-a5b9-54b7e1e7a5a4/

  I hope this helps.

  Rob - bicycle - Mark Twain said it is good.

• executable files: cannot access the file because it is being used by another process

  Hello
  I created a file named test.bat on my desk
  baptized "test.bat" and sent the notebook, wrote "REM" and recorded.
  so, I closed my notebook and reopened, has added another "REM" and saved the file again.
  then I tried to rename, move the file to another folder and delete
  everything went without any problems.

  But if I create the file and run it, the command prompt will appear for a while and then disappear.
  I can rename or move the file without any problem,
  But if I try to edit the file in Notepad, I get this error:

  The process cannot access the file because it is being used by another process.

  and the file is not saved.

  also, if I try to delete the file, it seems to be deleted until I press F5, the file appears again.
  When you try to rename/move this new file, I get another error:

  File Access Denied

  You need permission to perform this action

  You need the permission of the administrator of the computer to make changes
  in this file

  It seems the file is opened (or if I choose to delete) after a few minutes, then it is not if I try to access
  the file (I kept pressing F5 every few seconds for 15 minutes and the file is missing)

  the problem appears if occuar with any file name, anywhere, not just the office or home by car, not even on the same disk,
  while I had no problem when I started in an old installation of windows xp and repeat the same steps.

  I tried to use the sysinternals utility handle, that's what I have:

  After creating test.bat:
  C:\Users\User>handle test.bat

  Copyright (C) 1997-2013 Mark Russinovich
  Sysinternals - www.sysinternals.com

  No found the corresponding handle.

  After you run test.bat:

  C:\Users\User>handle test.bat

  Handle v3.51
  Copyright (C) 1997-2013 Mark Russinovich
  Sysinternals - www.sysinternals.com

  System pid: 4 type: file A18: C:\Users\User\Desktop\t
  EST.bat

  has obtained the result above after attempting to remove test.bat also.

  After the creation of othertest.bat:

  C:\Users\User>handle othertest.bat

  Copyright (C) 1997-2013 Mark Russinovich
  Sysinternals - www.sysinternals.com

  No found the corresponding handle.

  After execution of othertest.bat:

  C:\Users\User>handle othertest.bat

  Handle v3.51
  Copyright (C) 1997-2013 Mark Russinovich
  Sysinternals - www.sysinternals.com

  System pid: 4 type: BD0 file: C:\Users\User\Desktop\o
  thertest.bat

  After you rename the othertest.bat:

  C:\Users\User>handle othertest.bat

  Copyright (C) 1997-2013 Mark Russinovich
  Sysinternals - www.sysinternals.com

  No found the corresponding handle.

  C:\Users\User>handle renamedtest.bat

  Handle v3.51
  Copyright (C) 1997-2013 Mark Russinovich
  Sysinternals - www.sysinternals.com

  System pid: 4 type: BD0 file: C:\Users\User\Desktop\r
  enamedtest.bat

  the also occuars when I run any .exe file and delete it after its finished running, I deleted
  the handle.exe and the handle64.exe after the test above and at the same time returned when I updated their records.

  can someone help me?
  IAM using Windows 7 ultimate 64-bit.
  Thank you.

  I struggled with this VERY ENNUYANT thing for a long time on a Windows Server 2008 R2.

  Just found the answer:

  http://superuser.com/questions/260375/why-would-system-continue-locking-executable-file-handles-after-the-app-has-exit

  Activation of the service 'Application Experience' does the trick for me.

  If I got paid for every minute spent dealing with the mysteries of Microsoft... No, wait! Paid!

  Thank you Microsoft!

• How can I fix this error: DF024: unable to preserve the original file to... Error 32 the process cannot access the file because it is being used by another process. SEQ (1352).  ?

  I install creative cloud desktop application Illustrator on a machine with windows 7 64 bit running in a domain environment.  The download begins and takes about runs for a bout 10 minutes and then stops with error: DF024: impossible to preserve the original in "C:\Program Files\Adobe\Adobe Illustrator CC 2014\Support Files\Contents\Windows\AdobeLinguistic.dll" file error 32 the process cannot access the file because it is being used by another process. SEQ (1352)

  I am logged on as network administrator, and there is no other apps except a web browser (Chrome) running.  There is no other users logged in to the machine.

  How can I see what another process is using the file necessary so that I can fix it?

  Thank you

  MelissaB34 if you continue to face the difficulties of installation, you can also try to use the CC cleanup tool to help ensure a clean removal of the software.  You can find more information, as well as a link to download the CC cleaning tool, to use the CC cleaning tool to resolve installation problems. CC, CS3 - CS6 - http://helpx.adobe.com/creative-suite/kb/cs5-cleaner-tool-installation-problems.html.

• Rearrange the order of the fields in a custom battery Manager

  I am creating a custom handler where the content fields overlap between them (like the tabs of the file) and I want the field to appear above the other tabs when selected.

  I've been (but not all)

  • Adds an array of fields to the custom handler in their order, but during the sublayout, I put in the position and arrangement of the field first before all other fields
  • also added the index selected the Manager first, but the order of focus change.

  Does anyone know how to rearrange their display order battery? Is it still possible?

  It is only my understanding...  Not done.

  I think knowing that a Manager displays or paint the fields in the order they are added.  It will also move by default in this way.  When the focus moves, the field is painted with focus, but what this really means is that the area of the screen is redrawn.  The Manager will know which fields are displayed in the box that needs repainted and asked to be repainted.

  So if you have two fields, and they overlap, the second field is always painted on the first field, which is not what you want if the first field is in focus.

  In short, using my 'model', if you want something on top, it must be the last thing added to the Manager.

  So when the focus moves, you need to add and remove fields to the Manager.  This is not an operation that I would actually recommend.  Change of field managers in this way is 'expensive' in regard to treatment and could slow down at all, if in fact it works - I don't know how well a manager could face having the field at point removed and re added.  But this is probably the easiest option, at least the simpler I think.  The only other option I can think of involves a fancy paint treatment.

  You want to give this a go and see how you go?

• To access the fields of the form with between [square brackets] in the name

  Just wondering if anyone has any ideas to access form field values when the field names include media as those of the cfdump of a post form below (it's a webhook from MailChimp)?

  When I try to access the values using the #form.data [list_id] # for example, I get a ColdFusion error, I guess because he thinks I'm trying to access an array element. Any help appreciated.

  struct
  DATA [LIST_ID]	000000000
  DATA [NEW_EMAIL]	[email protected]
  DATA [NEW_ID]	000000000
  DATA [OLD_EMAIL]	[email protected]
  FIELD NAMES	TYPE, FIRED_AT, DATA [NEW_ID], DATA [NEW_EMAIL], [OLD_EMAIL], DATA [LIST_ID]
  FIRED_AT	2010-03-08 17:49:09
  TEMPID	[empty string]
  TYPE	upemail

  You can access the members of struct via dot-noation if the keys are "valid variable names" or through the support rating, for example:

  myStruct ["myKey"]

  Using the notation of support not valid variable name restrictions that dot notation has.

  --

  Adam

• Programmatically access the method of service (customer interface)

  Hello
  
  I work with JDeveloper 11.1.1.6.0. I exposed an ApplicationModule method in the client interface.
  I know I can drag and drop on my view and work with it. But how to access these programmatic method?
  Can I use the bindings, y at - it a "best practice way"?
  
  Thanks in advance.
  Alex

  Check [url https://blogs.oracle.com/jdevotnharvest/entry/best_practice_invoking_business_services] best practices invoking business services methods from JSF beans

• How to access the field parent of the child

  Hi all
  
  I need display the field parent in the child for the loop. Can anyone suggest the proper syntax to do that if you please and also, is there a difference between these two xml tags: <? Field1? > and <? /Field1? >. There are two tabs in the field form, status bar help text and help Key (F1). Can I use an any of them, or is there a difference? Help, please.
  
  Thank you.

  You must type the code in the status bar tab, everything that cannot fit in the status bar overflows to the tab key help.

  Check this: http://74.125.113.132/search?q=cache:AAdZBZpwWpoJ:www.w3schools.com/XPath/xpath_syntax.asp+xpath&cd=2&hl=en&ct=clnk&gl=us

  . means that the current node or level
  .. will take you to a level upwards

  For example, you can use... / as many times as necessary to get to the element you want.

  Thank you!

• We can access the session scope variable just by using its name

  Java EE 6 tutorial contains a "Case Study of the Duke's Bookstore example". I did not understand after statements of this case study:
  
  * bookdetails. XHTML *.
  
  {code}
  < h:outputText value = "#{selected.title}" / >
  {code}
  
  * BookstoreBean.Java*
  
  {code}
  public String details() {}
  Context()
  . getExternalContext()
  . getSessionMap()
  .put)
  "selected."
  getFeatured());
  
  return ('bookdetails");
  }
  {code}
  
  I want to know we can access the defined in bookdetails.xhtml session variable by simply using his name as done previously?

  This is a feature of basic Expression Language (EL), it is not specific to JSF. And it is not specific to the scope of the session, or you can put the beans in any area (page, request, session, application, flash, conversation, regardless of how extensive custom that you create) and reference it using EL only his name. The thing you need to take care of, is that the bean lives in a scope, which can be done using JSF specific or files of configuration, through CDI, annotations or by manually setting the bean in a specific through Java code scope. It is flexible, that is the nature of the Java platform.

• To access the webcenter content/imaging of documents using a URL

  Hello
  I would like to know if there is any possibility to access the content of WC by using a URL.
  For example:
  There is a document called "Invoice1232.pdf" in the content of the WC.
  I want to download from a custom web application.
  Can I open/download using a url similar to "http://myserver:, / Invoice1232.pdf?
  
  Thanks in advance,
  Marc

  . Insert documents, the web application at the WC. I guess with persistent URL or an IdcCommand... I don't know what is the best...

  I would go with CRMI (if your application is written in Java) or web service (other languages). A sample of CRMI is available, for example, here: Re: how to check the file exists in the path specified in the content server or not

• To access the EFS data from another disk using original certificates/keys

  I use EFS on a Workgroup XP - Pro, SP3 and have backed up keys.  I am trying to access the files on this disk now mounted in another machine (also SP3 of XP - Pro and in a working group).  I can load the certificates of the first machine in the second machine by double clicking it.  Once the certificates are loaded, how decipher you?  I get "Access denied" when I right click and try to decrypt the files on the original drive.  The MS help talk about designating a "File Recovery Agent", but this procedure seems to be to area of machines and gets a bit fuzzy for working groups.  BTW, I'm testing my file recovery process.  No data is at risk.  Can you tell me FAQ to decrypt a file on a disk that is moved to another machine using the original (REC & PFX files) encryption certificates/keys?

  Hello Stephen,

  The question you posted would be better suited for COMPUTING public Pro on TechNet. I would recommend posting your query in the TechNet Forums to get help:

  Windows XP TechNet forums