To access the FMS of different (urgent) domain

Similar Questions

• Fonts Typekit works not when you access the site through go daddy domain forwarding.

  Let me start by saying that I am a complete nube. I have a limited knowledge of the terminology and the way that the web works but I'm learning. I have CC, has created a site for a friend and used a typekit fonts. I downloaded the site to my hosting account as a "subdomain" of my website to test and everything seemed to work very well. Once I felt that everything was ready to launch, I went to my account of go daddy friends and did his estate on the site. The site loads very well and all the fonts appear ok except one typekit fonts that I used. When you access the site directly (as a subdomain on my site, example: www.mypersonalsite.com/myfriendssite) I see typekit fonts in all its glory, however when accessing the site of the field pointed no name, no typekit fonts. Very confused. I was under the impression that the two methods to access the site will take you to the same place and yet they net of different results. Any help would be appreciated.

  Hey Danny,

  Web of Typekit fonts are served only for the specified domains to publish on time. You need to specify explicitly field of your friend when the site is published.

  The website URL (s) on the ground in the Upload FTP host and export as HTML dialog boxes take in charge several entries separated by commas as in www.mypersonalsite.com, www,myfriendssite.com

  I hope this helps.

  Abhishek

• Flash as2 cross subject to access the SWF from another server domain

  I have question cross-domain, how do I access the .swf from another swf file without using System.Security.allowDomain() in the swf file, which we are called.

  I use 2 domains and I have 2 files swf is a.com (a.swf) and another is of bcom (b.swf) I want to access the file the a.swf b.swf frames, if I use the system.Security.allowDomain() in b.swf file I can access executives. But without using this way I can access the file from another domain.

  Because I have a risk to change the file b.swf so I vant to go without changing the file b.swf is any other wey to access frames of the file the file a.swf b.swf. Please someone help me solve this problem.

  use a local executable (such as php) to load the b.swf and send it back to a.swf.  for example:

  loadSWF.php:

  <>

  $fh = fopen ("www.b.com/b.swf", "r");

  Header ("Content-type: application/x-shockwave-flash");

  fpassthru ($FH);

  ?>

  a.fla:

  var target_mc:MovieClip=this.createEmptyMovieClip("target_mc",this.getNextHighestDepth());

  target_mc.loadMovie ("loadSWF.php");

• Help! I can't access the BC administration panel after domain transfer...

  I messed up my domain pointers by adding a redirector and now my site points to a different Web site. How can I change this back? Whenever I try to connect to the administration of the province of British Colombia he re - head to the new domain, so I can not administer the site more. The area of the old/original was http://www.palominolarchmont.com and now it redirects to http://www.ironhorselarchmont.com. Let's change the name in the next few days, but for now, I want to be the area of the old/original. Also, can you give me detailed instructions on how to do this correctly when the name change takes effect? I tried to add a .htaccess file, but that no longer works. It's very frustrating, please help.

  Hi Eric,.

  In this case, you can still use the system URL to connect to your site and manage the - palominorestaurant.businesscatalyst.com and palominorestaurant.worldsecuresystems.com

  Adding that a .htaccess file will not work with BC, here's what you need to do in order to delegate a domain on us - redelegation - point your domain to our servers by name with a domain registrar

  Hope this helps,

  Mihai

• Different users accessing the data with different rights

  Hello
  I just started with Oracle and I don't know if
  This is the right way for what I was intending.
  
  I want to allow access to the data (tables, views,...) to different users with different rights.
  For example a user with select only the rights and another with select and insert rights.
  
  Database Oracle 10 g Express Edition is.
  
  Here are the steps I did:
  
  -This user will be allowed to select only
  create user UserSelectOnly...;
  
  -This user will have select and insert privileges
  create user UserSelectAndInsert...;
  
  -This user only contains data
  create user BaseDB...;
  
  -creation of test in BaseDB data
  create the table tdTest (...);
  
  -definition of role in BaseDB for right to select
  create the role RoleSelectOnly;
  
  -granting SELECT privilege for RoleSelectOnly
  Grant select on tdTest to RoleSelectOnly;
  
  -select grant (role) to the user UserSelectOnly
  grant RoleSelectOnly to UserSelectOnly;
  
  -definition of role in BaseDB to select and insert privileges
  create the role RoleSelectAndInsert;
  
  -grant select and insert privilege for RoleSelectAndInsert
  Grant select, insert on tdTest to RoleSelectAndInsert;
  
  -grant select and insert (role) to the user UserSelectAndInsert
  grant RoleSelectAndInsert to UserSelectAndInsert;
  
  My problem is that the definition of user (BaseDB) works as a database.
  Are there more effective ways in Oracle 10 g Express?
  
  Thank you
  Wilfried

  Hello Wilfried and welcome to the forum.

  First of all, it's a property that you have given time to review the security of the database.

  My immediate comments:

  You have 3 users:

  -This user only contains data
  create user BaseDB...;

  Very well, good thing. Use an administrative account/data owner.
  You might consider locking when you do not have administrative tasks in the schema.

  -This user will be allowed to select only
  create user UserSelectOnly...;

  -This user will have select and insert privileges
  create user UserSelectAndInsert...;

  OK, but no need to take account of their privileges in the names. You could simply call their

  SomeUser
  AnotherUser

  You have two roles

  -definition of role in BaseDB for right to select
  create the role RoleSelectOnly;

  -definition of role in BaseDB to select and insert privileges
  create the role RoleSelectAndInsert;

  Seems ok, it's a good thing here for the description of privileges in the role itself.

  Maybe I would call them something like
  RoleSelect or RoleRead or BaseDBSelectRole
  RoleInsert or RoleWrite or BaseDBUpdateRole

  Should be updated (and DELETE), as well?

  Another approach would be to separate between the tables.

  For a group of tables, select, insert, update, delete are granted to a role.

  For another group of tables, different privileges are granted to another role.

  That is, there is no general answer, correct, it depends on your application.

  Often the roles are used for ease of maintenance. In other words, if you have several users who need
  the same set of privilege, these are maintained by a role.

  Maybe you don't want to use roles, but I like them.
  But attention not only

  Select on all tables to a single role
  Insert on every table to another role
  Update on all tables to a third party role.

  Unless, of course, it gives meaning to your scenario.

  My problem is that the definition of user (BaseDB) works as a database.
  Are there more effective ways in Oracle 10 g Express?

  Not sure what you mean. Schema in Oracle and user are often used for the same thing.

  In your case, BaseDB is the owner of (all) the tables, no problem.
  As mentioned, you might choose to block the account.

  The main thing is, no application, or ad-hoc user should log in as BaseDB

  And the users of your system should be exactly the privileges they need to do their jobs
  nothing more, nothing less.

  Concerning
  Peter

• Access the variable in different class

  Hey guys,.

  So I make a program that generates circles where you click, and I want to apply some physics. I was thinking about creating a new class that contains all of the physical code and then apply to the circles that are created, which is the way to do it?

  I can't use the name of the variable of the circle in the physics class. And some stuff on the web that is said to make the variable public, and static, but I create the variable inside of a function, and it wont let me make public or static it. Even if I put it in the class, I get the same error (access from the circle of property not defined). Here is the code:

  ------------------------------------------------------------------------------------------ ----------------------------------------

  package {}

  import flash.display.Shape;

  import flash.events.MouseEvent;

  import flash.display.MovieClip;

  import flash.media.Sound;

  import flash.media.SoundChannel;

  Import fl.transitions.Tween;

  Fl.transitions.easing import. *;

  Import fl.transitions.TweenEvent;

  import flash.utils.Timer;

  import flash.events.TimerEvent;

  SerializableAttribute public class Main extends MovieClip

  {

  var pop: PopSound;

  var soundChannel:SoundChannel;

  var circleReady:Boolean = new Boolean;

  var coolDown:Timer;

  public void Main()

  {

  stage.addEventListener (MouseEvent.MOUSE_DOWN, mouse click);

  pop = new PopSound();

  soundChannel = new SoundChannel();

  circleReady = true;

  cooldown = new Timer (500, 1);

  }

  function mouseClick(e:MouseEvent):void

  {

  If (circleReady is true)

  {

  var theX:Number = mouseX;

  var they: number = mouseY;

  var circle: Shape = new Shape();

  circle.graphics.beginFill ((Math.random () * 0xFFFFFF), 1.0);

  circle.graphics.drawCircle (0, 0, ((Math.round (Math.random () * 40)) + 20));

  circle.graphics.endFill ();

  Circle.x = definition x;

  Circle.y = they.

  stage.addChild (circle);

  var xTween:Tween = new Tween (circle, "scaleX", Bounce.easeOut, 0, 1, 0.5, true);

  var yTween:Tween = new Tween (circle, "scaleY", Bounce.easeOut, 0, 1, 0.5, true);

  soundChannel = pop.play ();

  circleReady = false;

  coolDown.addEventListener (TimerEvent.TIMER_COMPLETE, timeDone);

  coolDown.start ();

  }

  function timeDone (e:TimerEvent): void

  {

  circleReady = true;

  }

  {

  }

  }

  }

  }

  ------------------------------------------------------------------------------------------ ----------------------------------------

  Any help would be great, thanks

  How can ensure me that the compiler finds Collision.as?

  According to the file format that you are using:

  1. . FLA: Collision.as must live in the same folder as the FLA

  2..XFL: Collision.as has to live at a higher level the. XFL file (on the same level as the folder with the same PREFIX as your xfl)

• I have 2 different accounts on the same sites. Whenever I go on this site, one of my usernames prefills the field of the United Nations, and I can't access the other account. I can't replace my pre-filled username. Ideas?

  I have 2 different accounts on the same sites. Whenever I go on this site, one of my two (always the same) identifiers pre fills in the username field and I can't access the other account. The Web site legitimately refuse my password. I can't replace my username pre-populated because the second I hit enter to open a session, the initial username is rewritten in its field. Or user names is registered by firefox anywhere in the "Tools"; Options, security, advanced, or fields from the privacy menu.

  I noticed that this Web site has installed a cookie on my computer called "_rememberme" that contains the user name plaguing me.

  This is a Web site that I have access to very sensitive and important information, and I have to have two accounts available at different times.

  Thanks, Joshua
  XP, sp3; FF3.6.3

  This has happened

  A few times a week

  == I added the second account on this Web site.

  You will need to disable that remember me cookie, and make sure that you remove a tick to remember you on this Web site.
  Tools > Options > privacy > Cookies: "show the Cookies".

  You can disable the automatic filling of a name and a password.

  See:
  http://KB.mozillazine.org/Password_only_filled_after_entering_user_name
  http://KB.mozillazine.org/signon.autofillForms

  To open the topic: config page, type Subject: config in the address bar (address) and press the Enter key, as you type the url of a Web site to open a Web site.
  If you see a warning then you can confirm that you want to access this page.

• I've set up another configuration of TCP/IP, but it does not connect. I need to access the 3 different machine networks. Any ideas?

  I've set up another configuration of TCP/IP, but it does not connect. I need to access the 3 different machine networks. Any ideas?

  original title: alternate tcp/ip

  If by "alternate TCP/IP configuration" you mean the settings on this screen--> http://tinyurl.com/42kbqqz, then, to quote Inigo Montoya, "you keep using that Word. I don't think it means what you think it means. »

  The 'alternative' configuration settings tab, if you select "IP address private auto" (APIPA) or "specified user" is only used IF "obtain an IP address automatically" is set on the tab 'General' (http://tinyurl.com/8p9hn) AND the adapter cannot get an IP from a DHCP server.

  Most cable networks use a DHCP server to automatically assign IP addresses.  In this case, just plug your Ethernet cable and you're automatically configured and connected.

  If the problem is that your network requires a static IP address (that is, they use a DHCP server to automatically assign IP addresses), you will need a third-party network settings manager.  If you have an IBM (Lenovo) ThinkPad, you can use "Dial-up connections." IBM Otherwise, see this Google search (I have no experience with any of the applications shown, so I can't comment about them): http://www.google.com/#sclient=psy&hl=en&source=hp&q=network+configuration+switcher&pbx=1&oq=network+configuration+switcher&aq=f&aqi=g-v5&aql=&gs_sm=e&gs_upl=23l1333l1l1599l12l8l0l0l0l5l278l1344l0.7.1l8l0&bav=on.2,or.r_gc.r_pw.&fp=74e371c96a48f4b&biw=1024&bih=649

• How to access the management of VLANs with a different virtual LAN (Dell powerconnect 6224)

  Hello

  DELL powerconnect 6224 reference.

  I want to access the management of a different VIRTUAL LAN VLAN.

  The management of VLANS is 100 of VLAN. not the routing

  My computer is vlan 60 (192.168.60.10) and I want to connect via ssh or http (192.168.100.1) to manage my switch.

  Thank you for your help on the command line

  The management of VLANS on the 6224 is not routable. So, you will not be able to access VLAN 100 from any other VLAN. However, you can manage the switch from other VLAN IP addresses. So if VLAN 60 has an IP of 192.168.60.1 you can http and ssh to it. And if the VLAN routing is enabled you have access to 192.168.60.1 on the other VLAN.

  See you soon

• Is it possible to access the Data Domain to retrieve records?

  Hello

  I'm using OEID 3.1.

  Today, I was asked if I know not if its possible to access records stored in the domain of data to recover.

  In fact, the question was if there is a way to access the "base" of the field of data to recover the data from there.

  Is this possible? Is there a way to recover the data in the domain of data stored?

  I think only it would be possible to retrieve data but without the column information, only a simple retrieve information by placing a table of results and make an export, but maybe there is a way to make a retrieve data as an export sql, including information on metadata, etc.

  Best regards and thanks for the help.

  Of course, you call the web service server short conversation

  http:// :/short-server/ws/conversation /? wsdl

  with a content application like this:

  http://schemas.xmlsoap.org/SOAP/envelope/"xmlns:ns ="http://www.endeca.com/MDEX/conversation/3/0"xmlns:typ ="http://www.endeca.com/MDEX/lql_parser/types">" "

  en

  RETURN ResultSet AS

  SELECT Attributeto, attributB

  WHERE attributB > 5

  a you will receive a response with content details.

  Is that clear or you need more details?

• How can I access the tutorials that come with Photoshop on a Mac?  I have the "Editor", if that's what it's called, in front of me.  I consulted the tutorials on a Windows computer, but the arrangement on a Mac is very different?

  How can I access the tutorials that come with Photoshop on a Mac?  I have the "Editor", if that's what it's called, in front of me.  I consulted the tutorials on a Windows computer, but the arrangement on a Mac is very different?

  Hi jrjw48109603,

  • I'm really sorry but I still don't know what tutorials you talk.
  • Maybe this can work for you - https://helpx.adobe.com/photoshop/tutorials.html
  • And if you talk about the Welcome screen, please follow the instructions here -Troubleshooting the Welcome screen

  Concerning

  Rohit

• How to access the virtual machines to different physical network?

  Hello

  I'm new to ESXi, can someone tell me how can I access virtual machines on the physical network existing in case I use different IP classes? Physics of the network by using the class C IPs and I assigned IPs to virtual machines of class A? If it is possible, then, what are the steps?

  In fact, I installed exchange 2010 VMs and also want to access the email accounts of physical network.

  Thank you.

  vmjunki wrote:

  You mean there's no way in ESXi to configure the way so we can access the virtual machines to physical network? without third-party applications.

  Because it is impossible for the various networks IP connect without a router, you must have such a device. There is really no difference in that in a pure virtual or physical environment.

  You might think the ESXi host as a box with one or more servers (virtual) inside and one or more layer (virtual) two switches, just like a small server room. This means you will need to provide the same type of connectivity that you would have to a new server room with machines configured with addresses in a different IP network range.

• I'm trying to upgrade a site from Muse and it keeps telling me that the site has been created with a different version of Muse. I have updated Muse and still can not access the site to make changes.

  I'm trying to upgrade a site from Muse and it keeps telling me that the site has been created with a different version of Muse. I have updated Muse and still can not access the site to make changes.

  Hi rgarden95,

  Can you please confirm the exact version of Muse, you open the file with?

  To check the version of Muse, please click Help-> on Adobe Muse CC.

  Kind regards

  Akshay

• To access the controls and their values in different JFrames and forms

  Hi all - is it possible to access controls and their associated information? For example, in my old .NET application, I got a form where users could enter usernames/people with disabilities and also preferences for the launch of other external tools. The user filled in the text boxes and made a few selections on combo boxes etc. - I then recorded in an ini file which is loaded at run time. Then from anywhere in the application I could do something like:
  
  Dim strUserName As String = frmUserSettings.txtUserName.Text//for username
  Dim optLocalorRemote as String = frmUserSettings.cmbLocalorRemote.SelectedItem.ToString () //for selected item in the drop-down list box
  Dim optSomeOption as Object = frmSomeForm.SomeControl.Value //etc etc...
  
  You can call any control in any form and obtain its associated variables and also call any method belonging to him in .NET or void. Is it possible to do in the frameworks for Swing? I did some research but can't seem to find the equivalent in Swing
  
  If it is not possible can then someone point me in the right direction on how to do it? Do I need to define a class and I then have to instantiate each control in the class and have the getters/setters or y at - it an easier way? I essentially have an obligation to access related information across different forms in the application
  
  I found this:
  http://StackOverflow.com/questions/4958600/get-a-swing-component-by-name
  But this seems to return the control names and no values?
  
  Thanks in advance for any advice or help - we appreciate it! :)

  Hello Matt,

  for what you do with files .ini, java provides the java.util.Properties class.
  To access the other JFrames and forms (JPanels), you pass a reference to this framework/Panel to the place (class or method) where you want to retrieve information from this framework/Panel.
  Example:

  public class MyFrame extends JFrame {
    JPanel myPanel1= new JPanel(...);
  ...
    MyVeryOwnPanel mvop= new MyVeryOwnPanel(myPanel1,...);
  }
  

  Now within mvop, you can look at what happened to myPanel1.

  HTH

• access the timeline of a .fla for a different .fla

  Hello: This is a function (belonging to file1.fla) who plays, starting at a specific frame when the user clicks a button.

  function goToFuncMLR(eventMLR:MouseEvent):void

  {gotoAndPlay (11) ;}}

  Instead, what I want to do is to play, beginning a specific image in a different .fla file.

  If the external .fla file is called file2.fla, what should I do to access the schedule of file2.fla of file1.fla?

  I feel that the solution lies in a charger inside file2.fla method.

  Thank you, MLR

  It's ok, we'll do our best to help you get what you need, to make sure that I understand, you want to spend .swf1 to a certain slice of .swf2 when the user clicks a button? If Yes, my suggestion would be to have a main movie (.swfMain) and in load .swf1 and when the user clicks, download .swf1 and load .swf2... If it sounds like what you need let me know and I'll help you get started...