To connect to a router Linkskys WRT1900ac

Similar Questions

• iMac connects to the router of Linkysys WRT1900ac

  I am trying to help a friend get his iMac 12.1, that is running 10.11.4, to connect to a new Linksys WRT1900ac router.  The router is a novelty in this House, is in the same room of 10 x 12, as the computers listed below, and the installer was using the Linksys recommends the method, which is to let the Linksys to make adjustments.

  Here are its configuration;

  The router is connected to a cable modem, ISP and the following devices are connected to the router and works well;

  Via ethernet

  Windows 10 PC

  AT & T cell phone extender

  Ooma VOIP

  Wireless

  iPhone

  iPad

  Notebook PC

  While troubleshooting my MacBook 5.1 also allows to connect without problems to the Linksys router.

  Note that her iMac connects without problem to the wifi network Netgear Guest unprotected from its neighbor.  I also installed in his room my 1st generation Airport Express, which has added a second wifi network but without access to the internet and his iMac connect without problems to this wifi.

  Here are the steps I took to try to solve this problem, and they were unsuccessful;

  ➔ Scanned for malware/adware with Malwarebytes and found nothing.

  ➔ Ransacked after the files in/Library/Preferences/SystemConfiguration and restarted

  com Apple.Airport.Preferences.plist
  NetworkInterfaces.plist
  Preferences.plist

  ➔ When the previous did not work I trashed all the files in the folder/Library/Preferences/SystemConfiguration except "com.apple.boot.plist', which would not remove and rebooted

  ➔ Created a second user account and still not able to connect to the Linksys router

  ➔ Repaired permissions

  ➔ Created a new location in System Preferences > network and added the OpenDNS addresses and in the material value MTU 1453

  ➔ restarted in safe mode and not still could not connect

  Firmware on the router Checked ➔, which is updated

  ➔ Reset SMC

  ➔ reinstalled El Capitan via the App Store

  That's all I could think about.  I'm puzzled.

  I checked the router and everything seems ok, but I'm no expert.  There may be something I'm not contagious.  I have seen that he has no MAC filtering set up in the router, so this isn't everything.

  Please tell me if there is something that I'm on.  Is there something in the router, that I need to change?  There are other files in the Mac, I need to delete?  Is there any other troubleshooting steps I can take to identify this problem.

  Any help would be appreciated as it is a total mystery to me.

  There are a lot of variables, but start with some basic info. So on her iMac, if you click the wifi at the top right, you can see his router listed?

• 9.3.4 disabled wifi on an Ipad, but it connects to the router. Just don't download at all

  IPad was working fine, but I've updated to 9.3.4. Now Wireless does not work. Shows connected to the router, but nothing happens, but say unable to connect to the server, error trying to access the internet or by mail. Also turn continuous flashing VPN gray to green, then again, but we have never set up a virtual private network. Don't know if it is connected. Have you tried

  1 disconnection / reconnection to 2 routers that work very well for other devices

  2 reset wireless via settings > general > reset > reset network settings and then hang up again

  3 airplane mode on, wait a few minutes, then shut off again

  Overall, the router will connect to any time, we put the password, but there is no transfer of data. 3 other devices work fine with the router. Don't know where to go from here, or if it is possible to back out from the upgrade. Anyone else having this problem? A research increase the same problem.

  Thank you

  Anything that causes the problem is not specifically 9.3.4, which fixes just a security breach. Have you tried to restart routers?

• Firefox prevents the connection from the router

  WRT120N router Linksys-Cisco, Firefox 22.0

  I discovered that my router rejects all attempts at connection (192.168.0.1, 401 authentication failure "browser can not perform authentication or authentication failed") when you browse to it from Firefox. It allows the connection when the attempt is made of Chrome.

  I remember having long ago something similar with Firefox, but resolved by disabling the option "say it me not to follow the sites", following what connections made; just looked and it is still not verified - if this isn't it.

  I looked a the packet capture and the password IS sent to the router, but it rejects the connection.

  Any ideas?

  "BUT IT WORKS CORRECTLY BOOTED IN SAFE MODE."
  Which prompted me to check the extensions.
  I called, guess what... TAKE STEPS TO TRACK ME.

  (Why is there such an extension if it is built in function?)

  Disabling, allowing the router to connect! I don't know why twice now, try to activate Do not not track eliminated the possibility to connect to the router... but this is the solution.

• HP Envy 4500: Printer connected to the router, but will not print wireless Macbook

  I want my wireless printer to work on my macbook, but I can't. I tried setting up on the HP utility to connect with the router as the mac and printer on but it does not work! It indicates that the download was successful, but the device was not reachable. I don't really know where to go from here and any help would be really appreciated. Thank you.

  Hey @miriamnimmo,

  Welcome to the Forums of HP, I would be happy to help you! I understand that you have the printer set up on your network, but the software says that the device is not accessible. Sometimes the IPv6 may interfere with the connection, and I suggest we disable that before anything else. On the fornt of the printer Panel, scroll down to and then select Wireless. In the wireless Menu, select Advanced settings, then IPv6 and.

  Now we are going to let the router and unplug the power cable (NOTE: do not reset the router), then do the same with the printer and shut down the computer. After a minute, plug in the router, wait to fully turn on, then plug the printer back in and wait for the wireless light become solid. Once the router and the printer are on, go ahead and re - turn on the computer. This will refresh the network connection.

  Please let me know if this solves the problem by marking your post as solved (click on Accept as Solution button below). If the problem persists, let me know, I'll watch for your reply.

  See you soon!

• 15 - r074TU: laptop does not connect to the router

  Day sum... .my laptop (model No. 15r074TU) with window 8.1 does not connect to the router that is D-link

  I uninstalled my driver reinstalled again, but it didn't work... even if I formatted my laptop, reconfigure the router and... done with all possible measures to overcome this problem, but have ultimately failed. Please suggest ways to tackle this problem as soon as possible...

  Follow the wizards in the following forum sticky and troubleshooting.

  http://h30434.www3.HP.com/T5/notebook-wireless-and-networking/common-fixes-for-wireless-connectivity-issues/m-p/4831601#M86871

• Satellite L300 - unable to connect to my router

  Hi guys,.

  I got this laptop a few days ago, everything works as it is supposed to be except for one thing, I try to connect to my wireless internet signal and it picks up the signal itself as a strong signal, but when I go to enter my WEP it never connects. I can't actually connect to the signal.

  I have another laptop which I can easily connect to my wireless signal.

  I have a wireless cable modem so it Wouldnat be my internet service,.

  Someone at - it ideas? Purchase of an additional Wi - fi adapter would work instead of using the built in Wi - fi? Also, the laptop came with Vista Home Basic installed.

  Any help would be greatly appreciated.

  Thank you guys.

  Hello

  Can you connect to the router, if you disable WEP encryption?
  In addition, WEP encryption is not safe and can be cracked in a few minutes, then you should choose another encryption WPA or WPA2.

  In addition, I would recommend updating the driver WLAN. On the Toshiba site, you can find the most recent version.

  What OS do you have? If you have Vista try disabling the WLAN card feature in Vista Power Management for energy savings.

  Good luck!

• Re: My Satellite C660 is connected to my router but did not have access to the internet

  Hello

  I have a Satellite C660 (Windows 7) that I've had for more than a year. I had no problem with the connection to the internet before, but last week I went online and had a small yellow triangle down, at the bottom right of my screen against the bar of connectivity. When I click to connect to my router, it says that it is connected with a signal excellent but says that I have no internet access.

  Can someone please?

  Have you tried to reboot your router?
  Please, do it and check if the problem still persists.

• Connection to the router

  Good then sorry in advance if I'm really stupid and just missing something, but I just bought a HP p2-1343w desktop PC and I'm doing it to connect to my router. Following the instructions here led me to the impasse. As he does in the walk through, there is no option 'manually connect to a wireless connection'. And choosing the "set up a new network: set up a new access point or router ' brings me to a page where nothing never appears." I guess it's starting to find my router, but it never does. My router is just in the other room, and I have no problem connecting at all when using my laptop. So I'm just wondering if it's something escapes me. I know not all the information from my router, I just can't understand how to actually say that on my computer. If it makes no sense at all. Any help much appreciated.

  Hello

  Is your machine at the following link?

  http://h20000.www2.HP.com/bizsupport/TechSupport/document.jsp?objectID=c03520552 & lang = to & CC = US & TaskID = 101 & ContentType = SupportFAQ & prodSeriesId = 5295976

  If so, there can be NO of wireless, it has only:

  Networking

• Unable to connect to the router WLan - Satellite L300D

  Please help me so that I have still a few hairs left!

  I installed WLAN driver on my laptop Satellite L300D with Vista Home installed.

  I see my network in the available connections, but when I go to connect, it will not connect.

  My other two desktop computers can connect to the router without a problem.

  Any suggestions?

  Thank you
  Neil

  Hello

  I think that you didn t try updates. Right?
  Therefore, my first recommendation would be an update of the BIOS and driver WLan.

  Check the current version of the BIOS that is available on your laptop. If the latest version has been released then update the BIOS.
  In addition, to download the latest WLan driver from the Toshiba WLan portal and to update:
  http://APS2.toshiba-tro.de/WLAN/

  On this Wlan site, you will find three different WLan drivers for three types of WLan cards. First check your wireless network card, and then use the right driver!

  See you soon

• Satellite A300 - unable to connect to my router

  Hi all

  I have a Satellite A300 and a Satellite A300D. Since a year im dealing with a problem and eat my heart. I have problems to connect to my router, for the moment I have a Netgear ADSL modem router wireless. When I am looking for a wireless network it seems to find the network, but when I want to connect I get the message network is no longer in the area.

  The distance between my modem and laptops are 3 meters in an apartment, even when im sitting on my router :-) this is not not possible to connect to the wlan. Tried to connect without any wep/wpa encryption, no effect. Played with communication channels @ the properties of the wireless network adapter and the router, but this isn't a solution.

  Before I got the Netgear, I had a Linksys / Sweex / Cisco pro / router Wlan from HP. I tried all brands of wlan, with all routers routers of this I had the same problem.

  Frustrating him of is that I can connect to my neighbors without any problem, but not my own network.

  Anyone having the same problem or know a solution?

  Have you tried to update the WLAN driver on two laptops? You can find it on the Toshiba site and I would update the BIOS too:
  http://EU.computers.Toshiba-Europe.com-online decision-making supported Downloads & => Download drivers

  What operating system do you use? If you use Vista, you must disable the WLAN to save energy card. You can do it in Vista Power Options.

  You use the same standard WiFi on your laptop as on the router? For example I mean project. G check this!

  At the moment it is not easy to say what is the reason for this, but I hope that I could help you a little. :)

• Re: Wireless not connect / search for router - Satellite P305

  Hey all, I hope that I can help.

  As I come back from uni, my laptop has decided that its wireless won't work. When I scan, it cannot find the router in my house and the icon in the taskbar has a cross inside. When I plug my laptop into the router via ethernet, it connects very well then and the wireless takes over even the router, but as soon as I unplug the wireless dies again.

  My laptop is a Toshiba P305 and has an Atheros AR9281 wireless card.
  My OS is Windows Vista Home Premium 32 bit SP1.

  I know that's not the router, since everything else connects fine - my PS3, this old PC XP (so I do this thread), etc.

  Sometimes when I start the laptop it finds my router (and a neighbor), but when I try to connect to it it says "Windows cannot connect to this network" and it simply disappears. Also sometimes I can connect to the router after that the Ethernet cable is disconnected, but it is limited to the connectivity (i.e. I can't get on the internet) and soon the tomb with the message "Windows has not received a response from the access point or router" and can not find yet

  What I've tried so far.

  -Restart.
  -Leave the portable island for awhile.
  -Switch wireless switch and turn it back on.
  -Check I have the latest drivers for the card.
  -Reinstall these drivers.
  -Check if the WLAN or other network services are disabled.
  -Restart some services.
  -Disabling and then re-enabling the adapter.
  -Physically sitting right next to the router and it still can't find it.
  -System restore
  -Disable the WEP encryption on my router and use another method of security, even turn off security completely.
  -Reboot the router.

  I have not had any problems with the wireless front, he has just started happening yesterday.

  Thanks for any help/advice, I'm out of ideas.

  Hello

  I see you didn't update the BIOS
  Well buddy, I think you should do this!
  Update the BIOS, and then try again

  If you notice more WLan connectivity issues then I would recommend changing the WiFi channel! This has been useful for me in the past!

  I know that you tried to update the driver WLan but check this Toshiba page for the latest version of the WLan driver!
  http://APS2.toshiba-tro.de/WLAN/

• No connection with the router

  After doing a scan of normal viruses with avast anti-virus suddenly my network card started going crazy. I have had no connection to my router. When I checked my network connection there was nothing... no ip without dns server addresses nothing. Also no packets were sent or received. I have a toshiba tecra S2 and I reinstalled my card three times already everytime with the latest network drivers. It #s also no problem not related to my router because the two other home pc only works very well.
  hope you can help me

  Hello

  you said that you already reinstalled the NIC. And it did not work.
  So, I have a small suggestion for you:
  To test if your card is not working properly, download "UBCD4WIN Live CD" (Live - very easy to use Windows XP CD from the XP CD) and burn it to a CD.

  www.UBCD4Win.com

  After that starts with it and try to establish a connection with your laptop to your router. If you get a connection, then something in your BONES is broken and I suggest you do a system
  recovery.
  If no connection is given, try a Biosupdate and replace the network cable.

  If nothing will work, bring your machine to an ASP (Authorized Service Partner) for repair or at least a material balance.

  Good luck &
  Welcome them

• How to limit the bandwidth for each different devices connected to my router

  Hello

  Thanks in advance!

  Can you help me to limit bandwidth on perticular devices, I use NETGEAR (WNR1000v2 - N150 wireless router) and the version of the firmware of the V1.1.2.58, like almost 4 devices are connected to this router, I want to limit the speed of bandwidth to each device.

  I have not found the Qos in my Netgear.

  It might help if you provided in details with screenshots.

  Thank you

  Samira

  Not possible with this model of router

• Samsung S6 connects to the router but no internet

  When I switched to xfinity I bought a C6300. I had problems with the first not allowing my NAS to connect so I exchanged against another. My phone would connect to the router and work fine for awhile then lose Internet connectivity. The only way to get it back is to reboot the router. I tried several different units, and I am now on a C3700. The problem still exists and seems to be deteriorating. All of the suggestions.

  I solved my problem by replacing the Netgear with a Zoom. It was the only one that I could find who said it would work with Android. I hope that Netgear will get things straightened.