Re: Wireless not connect / search for router - Satellite P305

Similar Questions

• 15 - r074TU: laptop does not connect to the router

  Day sum... .my laptop (model No. 15r074TU) with window 8.1 does not connect to the router that is D-link

  I uninstalled my driver reinstalled again, but it didn't work... even if I formatted my laptop, reconfigure the router and... done with all possible measures to overcome this problem, but have ultimately failed. Please suggest ways to tackle this problem as soon as possible...

  Follow the wizards in the following forum sticky and troubleshooting.

  http://h30434.www3.HP.com/T5/notebook-wireless-and-networking/common-fixes-for-wireless-connectivity-issues/m-p/4831601#M86871

• While trying to install a Linksys E1500 he repeats that my computer is not connected to the router.

  Computer problems and the router

  I have a windows xp 2002 with service Pack 3. While trying to install a Linksys E1500 he repeats that my computer is not connected to the router. Ive tried a new cable and it does not solve the problem. He also said that my computer does not have wireless capabilities. Any suggestions?

  You'll be much more likely to get useful (or even possible) suggestions if you provide the full text of the error messages you get, without paraphrasing.

  For example:

  He repeated to me that my computer is not connected to the router. --> What is the real error message?

  He also said that my computer lacks wireless capabilities--> what is the error message itself?

  You are "trying to connect via a cable" to the router or you're talking about your Internet service (for example, the router is connected to the Internet via a cable)?

  You think that your computer has "wireless capabilities?  Open the Device Manager (start > run > devmgmt.msc > OK), then click on the + sign next to "network adapters."  Please provide the names of any devices listed there.

  Is your computer without a name, a laptop?  There a name of brand anywhere (for example, Toshiba, HP, Dell, etc.)?

  Open System Properties (start > run > msinfo32 > OK)
  Click Edit > select all
  Click Edit > copy
  Right-click in your response here and select Paste
  Be sure to hide the "System name" or "User Name" if it makes you feel better, but please do not remove anything else.

• There is an error with my computer, it does not connect with my router. It works with my usb 3g modem, but not with my router. My router works with other devices.

  There is an error with my computer, it does not connect with my router. It works with my usb 3g modem, but not with my router. My router works with other devices.
  I tried to connect my xbox to my computer to xbox live via the 3g router, but I was unable to. According to me, there is something wrong with the network card, since neither the wifi (wlan?) nor the lan connection seem to work.
  I harnessed connected my iPod, Xbox 360 and Nintendo DS for her, but not my computer. Please help me, what wrong with my computer?

  original title: problem with the map?

  Hi GustavTak,

  1. you have made no changes to the computer before the broadcast took place?
  2. do you get an error message?

  Try the steps from the following link:

  Windows wireless and wired network connection problems
  http://Windows.Microsoft.com/en-us/Windows/help/wired-and-wireless-network-connection-problems-in-Windows

  Additional information:
  Network connection problems
  http://Windows.Microsoft.com/en-us/Windows-Vista/troubleshoot-network-connection-problems

  Set up a wireless router
  http://Windows.Microsoft.com/en-us/Windows-Vista/set-up-a-wireless-router

• Lexmark printer will not connect to the router

  Original title: HELP

  I switched to Fios and now have a new modem/router and I don't know how to get my Lexmark printer to recognize. How can I solve this problem?

  Hello

  Thanks for posting the question in the Microsoft Community!

  The Lexmark printer will not connect to the router/modem.

  Because the problem is with the Lexmark printer cannot connect to the router, I suggest contact you the Lexmark support team in order to get help with this question.

  You can try to get help on the site:

  http://support.Lexmark.com/index?page=productSelection&channel=supportAndDownloads&locale=en&UserLocale=en_US

  If you need any help or if you encounter problems with Windows in the future, let us know and we would be happy to help you.

• ORA-16191: customer main newspaper not connected waiting for shipment

  I'm getting this error after you start to roll forward in real time from standby and connect primary swtich. Using Oracle 10 g on RHEL 5 2 in vmware
  
  Excerpts from shows trace files-
  
  ORA-01017: name of user and password invalid. connection refused
  
  Logging of 1017 errors received on the eve
  ------------------------------------------------------------
  Verify that the primary and standby use a password file
  and remote_login_passwordfile shared or EXCLUSIVE.
  and the SYS password is the same password files.
  error ORA-16191
  It may be necessary to define the DB_ALLOWED_LOGON_VERSION
  the value "10" initialization parameter
  ------------------------------------------------------------
  Error connecting to host 16191 Eve destination LOG_ARCHIVE_DEST_2 "stdg1".
  16191 error attaching to standby host of destination LOG_ARCHIVE_DEST_2 "stdg1".
  ORA-16191: customer main newspaper not connected waiting for shipment
  2010-06-30 10:45:28.885 60679 kcrr.c
  Heartbeat PING [ARCP]: Unable to connect to the day before "stdg1". The error is 16191.
  
  Well the error refers to the password file. I created the file using the orapwd primary and copied standby utility using the scp command.
  
  Even after you rebuild the password file, it continues with the error.
  
  A solution for this much appreciated.
  
  Also need to know if can see the contents of the files of password somehow.

  Please follow the password file name conventions.if is Linux then the password file name should be like:

  For Unix (Shell)
  orapwd file = $$ ORACLE_HOME/dbs/orapw SID password = password_for_sys
  For Windows (command prompt)
  orapwd file=%ORACLE_HOME%\database\PWDsid_name.ora password = password_for_sys

  I think this can help you in... considering that I also encountered the same problem.

  Kind regards
  Shitesh Shukla

• 305 a HP desktop printer: J611 Wireless Desktop HP 305 a series will not connect to new router to talktalk (using Chromebook)

  A new router through Talktalk and since then my printer Wireless does not connect.  It shows on my chromebook as this has already been added as a printer of cloud, but blue light wireless flashes.  Not had any problems before this that he was that we got the new router.  Tired to connect by using the method of the button/PIN button still no joy.

  Please note using Toshiba chromebook on windows/mac.

  Please help as I am ready to scream! Laughing out loud

  Longess

  Hello @longess,

  Welcome to the HP support forums.

  I understand that you have acquired a new router and get your Deskjet 3050 has connected to your new network.

  I would like to help.

  The blue light is flashing on the printer indicates that the wireless radio is on, but the printer is not connected to a network. This is the situation. You have a new router. The printer must be on the network.

  So the next step is to get the printer on the network.

  The deskjet printers family is usually USB wireless setup.

  This causes an obstacle when you use only a Chromebook.

  Chromebook does not support the software needed to turn the printer on the network.

  If you have access to a Windows or Macbook notebook, the following link will help you place the printer on the network.

  Configure the printer to a wireless network for the HP Deskjet 3050 a and 3070 e-all-in-one printer series

  I have something you can try.

  Check out this post from Sunshyn2005.

  Re: Deskjet 3050 does not connect to my wifi network

  If this message does not help to get on the new network printer, you will need to borrow a Mac or Windows computer.

  Good luck

• New wireless adapter does not connect to my router

  at home, I have a wireless router WRT120N set up for wireless internet connections, I also use the wireless adapter that comes with it. I recently bought a new adapter wireless like this: http://global.level1.com/product_d.php?id=891 and it connect to the router? Help, please

  I think that the wireless connection on your router may not work properly.

  Create a new wireless network.

  Connect the computer to the router with the Ethernet cable. Open the router setup page and go to the Wireless tab, change the name of the SSID wireless network to create a new wireless network. Change the channel to 11. Save the settings.

  Go to the tab of sup of wireless security and check the security settings. Make sure you have the key/password network correct.

  Go to the sub-tab to Wireless MAC filter and make sure that it is disabled.

  Go into the settings wireless Advanced tab change the interval of tag to 75, RTS and Fragmentation threshold to 2304. Save the settings.

  Now ty to connect to the new wireless network.

  If this does not work then try upgrading/re-Flash the firmware on your router.

  Connect the computer to the router with the Ethernet cable.

  Download the latest firmware from the site Web of Linksys and save it to your computer. Open the router configuration page and update the firmware on your router. After upgrading the firmware of your router, reset the router and reconfigure.

  Press and hold the reset button on the router for 30 seconds. Release the reset button and wait 30 seconds. Power cycle the router and reconfigure.

• WRT120N Wireless laptop connected to the router, but does not connect to internet

  I have a HughesNet HN9000 modem connected to a Linksys WRT120N router. I have two desktop computers, both running XP Home, connected to the router via ethernet .5e cables and work perfectly. I have a laptop running Vista Home Premium, I am trying to connect to the internet via the internal wireless card. According to me, the laptop connects with the wireless router, as it connects but says 'Local only' - it won't let me access the router IP/control panel. I tried to reset the router / modem as well as the parameters of the laptop, but I keep getting the same question.

  If I connect the laptop and the port #3 on the router via a cable .5e I can browse the Internet. But I need to be able to use the laptop throughout the House so electrician is not an option.

  I found this article which directed me to this download , which worked. If your help is most needed. Thanks anyway.

• C410a - wireless not connect to the Verizon FIOS router - fails MAC filtering

  I just bought an all-in-one HP Photosmart Premium C410a printer.  It does not connect to the Verizon FIOS Actiontek MI424WR router, failed the test of MAC filtering.  Spent half an hour on the phone with Verizon (no resolution as they checked the filtering MAC is turned off in the router) and 3 hours with HP (no resolution).  Sharing the printer on a home network defeated the purpose wireless and is not acceptable because I don't want to have another PC switched on just to get to the printer.  Someone was able to resolve the failure "MAC filtering" wireless?

  Without the MAC address filtering test indicates the problem is inconsistent with other available error messages.

  There may not be a real problem of filtering.  I saw this message associated with WEP key mismatches secutiry and a host of other issues.

  To what extent do you have on the installation.  We can work from there.

  Host family

  P.S. I saw messages asking people to try to disconnect the router from the internet while doing the configuration of the printer.  Have you tried?  Sometimes the router check with the service provider before it will allow a device to join the network.  It bypasses this audit.

• Equium M40x - wireless not connect not

  I recently changed ISPS to Orange for Virgin [cable] I used the Orange Livebox provided with my laptop and there is no connection problem. Virgin provided me with a Netgear WGR614 wireless router.

  Now my Equim will not connect to it. Can anyone offer a beginner assistance or advice? Is there a necessary driver update or do I have to buy a new wireless card for my laptop? My wireless network connection is currently via an Atheros AR5005GS.

  Don't you see your router's WiFi network and can connect? Don't forget, you must enter the key again to your new router.

  If this isn't the case, I think that the thing with Netgear router is to activate the wlan functionality.

  To do this, you must connect the router with normal lan cable. Then enter the IP address of the router in the internet browser, you can find this information in the manual with user name and password too.
  Try this, as I don't know what exactly is your problem with your wireless connection.

• laptop older does not connect to new router

  Hello

  I have a laptop Compaq Presario A940NR which is several years old.  Until last week, it was connected through a router.  The router has stopped working on all devices (printer, 2 other laptops).  Replaced with a Netgear N150 router. -connected to a desktop computer, wireless to the printer and 2 new laptops.  Most old laptop listed above does not connect to the network.  I tried (wired) connection directly to the ISP modem via ethernet.  He does not even recognize this connection.  I may need a driver updated, but unable to connect to the internet on the laptop.

  Help! and thank you,

  Hi, Darlene:

  Here are more recent (MARCH 2011) a version of the driver for your Atheros wireless card. I suggest you use it since you have a new router. There was a lot of connection problems with your Atheros card and new Linksys E series routers, for example.

  http://h20000.www2.HP.com/bizsupport/TechSupport/SoftwareDescription.jsp?lang=en&cc=us&prodTypeId=12454&prodSeriesId=472276&swItem=ob-91782-1&mode=4&IDX=1

  Paul

• Home wireless network connections cut - a router issue?

  I have 2 PC:

  1 desktop running XP (SP3) on a H61DE/S3 Asrock mobo and Intel G620 2.6ghz CPU. RAM = 2 x 2 GB.
  2. laptop running Windows 7 + Intel i3 CPU
  3 wireless router D-Link DSL-2680 =
  The office is directly connected to the router via an ethernet cable wireless.
  I created a wireless network which consists of my office and cell phones with the help of a USB and the XP Wizard on my desk. I then clicked on "Network Setup Wizard" in the Control Panel on my desktop (XP) and created the network connections.
  When I boot-up the two machines, I can see and access the connections network of desktop and laptop.
  HOWEVER, if I let the machines for a while and then come back, although I can see the icon for "DESKTOP" in my network places on my laptop, when I click the icon, the cursor looks like this market, but then an error window appears stating that it cannot find the device and I want to diagnose the connection. When I click YES, sometimes, it detects the OFFICE and sometimes it doesn't.
  The same thing happens on the desktop when I click on the "PORTABLE computer" icon in "My Network places".
  The strange thing is, when I try to connect via Start Menu / run / \\'IP address on the laptop or desktop, I can connect usually either to the PC.
  The questions are
  1 can you explain why I should b affected by these connection question - is this a problem of compatibility between window7 and XP?
  2. what type of home network, maintained by the router or directly between the laptop and desktop computer without involving the router?
  Thank you

  I assume that the HOMEDESKTOP, in this case, XP is the master browser because it is physically connected to the router and it is this machine that I created the wireless network and local.

  N ° master of domain is chosen in an election.  All devices have an equal chance of being elected little matter how they are connected. (A domain controller can always win, but that's neither here nor there).  The problem here is that the Win 7 machine doesn't listen to the broadcasts and therefore think that it is the only device on the network and therefore chooses himself as master of go.  The XP machine is involved in a normal election except that the Win 7 machine does not participate because he is not listening.  They both choose and for a while, you have two masters to browse.  The only listening to computer (XP) finally gets tired of hearing machine Win7 and abandoned as a master browser.  Win 7 becomes the only browser then, but it does not work because he doesn't listen to any computer on the network.  You can check this by bringing a window prompt (start-> Run-> "cmd") and enter the command:
  nbtstat - a HOMEDESKTOP
  or
  nbtstat - a ROMANLAP1-PC
  If the targen computer thinks that he is a master of travel, you will see a line "__MSBROWSE__".

  For some reason, keeping the folders "My Documents" opened on both machines maintained the connection for 15 hours that day.

  Anyway that you can keep the active connection, the machines will partner with the other.  Once a connection is idling, then it must re-establish contact and is when the master browser or a response of diffusion is necessary and the Win 7 machine is unresponsive.

  Try following all the steps in the article according to which apply to your configuration:

  "Networking of computers running different Versions of Windows"
    <>http://Windows.Microsoft.com/en-us/Windows7/networking-home-computers-running-different-versions-of-Windows >

  I don't think there is a firewall in itself, but the way Windows 7 manages 'Home' vs networks 'Public' that can do behave like a firewall and cause problems with firewall-like. Article states that ' the network location is a setting that allows Windows to automatically adjust security and other settings according to the type of network to which the computer is connected. "  --they don't talk a firewall, but this is part of what makes a firewall...

  HTH,
  JW

• HP deskjet 2540: HP 2540 printer will not connect to new router

  Hi, we just changed internet service providers and the printer will not connect to the new router, our HP laptop computer presents the printer in the list of network devices / wireless, but will not accept the password of network to the router when I ask him to connect. Makes me crazy! I have re-installed software etc. to connect the drive and make me anywhere I hope someone can help!

  Dave.

  Replacement/change your wireless router, try here.

  http://www.HP.com/global/au/en/wireless/reconfiguring-system-Help3.html

  Make sure that your router is set to a fixed channel wireless as the 1, 6 or 11, never 'auto '.  Try channel 1 first and then the other one at a time.  Make sure that the printer and the router are spaced at least 5 feet.

  However, if you have a gateway device (modem + router), all gateway devices are terrible for connectivity and wireless performance.   If this does not work, suggest you put this bridge in full bridge mode device and install your own router of high quality that YOU have full control over.

• PSP is not connecting to my router

  Hi, I have a model: router WRT110 wireless and my PSP 3000 do not connect to it.  I tried several times and sometimes the PSP Gets the signal, but only for a few seconds.  I have a Playstation 3 and it almost always works fine with the router, so I don't know why it will not work with the PSP.

  What are the settings you made on the router...?

  Do you receive an error message on PSP...?

  As you say, you can try to change the WEP security. Also, try to manually enter all the information network in the PSP and check if that helps... !!!