to display the message 'number of records updated in s m n'

Similar Questions

• How to get the original number multi-record block registration

  Hi all
  
  
  I know how to find the item duplicated in several record block.
  
  For Ex:

  Line_Num            Item_Name             Quantity
  1                           AA                      10
  2                           BB                      20
  3                           AA

  Here record 3rd nom_element is duplicated, I can able to check and display the message that "point is duplicated", I found [sheikyerbouti.developpez.com/duplicates/duplicates.htm].
  
  but I want to show as well as the original line to be number 1 when the nom_element came.
  
  Here I want to check the original Line_Num and display the message
  
  "Item is duplicated, update quantity in the original 1' line."
  
  Can someone help me find it?
  Thank you.
  
  Kind regards
  Guru.

  In the following key trigger write code like this I think it will help you

  declare
  v_Text varchar2 (20);
  NUMBER OF V_REC;
  BEGIN
  v_Text: =: test;
  V_REC: =: SYSTEM. CURSOR_RECORD;
  premier_enregistrement;
  loop
  If v_text =: test V_REC AND <> : SYSTEM. CURSOR_RECORD then
       
  GO_RECORD(:SYSTEM.) CURSOR_RECORD);
  RAISE FORM_TRIGGER_FAILURE;
  END IF;
  WHEN THE OUTPUT: SYSTEM. LAST_RECORD = "TRUE";
  NEXT_RECORD;
  END LOOP;
  GO_RECORD (V_REC); NEXT_RECORD;
  -v_Text: = NULL;
  EXCEPTION
  WHEN FORM_TRIGGER_FAILURE THEN
  RAISE FORM_TRIGGER_FAILURE;
  END;

• Disable the button new add tab CSS specifications of the trade while displaying the Notification number GTIN message duplicate

  Hi Ron,

  I need to disable the Add button again in the CSS tab on specification of the trade while displaying the Notification number GTIN message duplicate.

  If it does not duplicate notification displayed GTIN message not necessary to disable the Add button again in the CSS tab. Please see the screen shot for more information.

  You said same thing as below mentioned in bold.

  2. you can lock whole sectors, such as the CSS section, you use an extension called SectionLevelEditing. You can read about it in the Guide of extensibility, which will guide you to a more detailed document.

  If you are wanting to keep lock editable, but section towards the bottom/remove the button Add a new one just so you can use the UIe feature Extensions, also documented in the extensibility Guide.

  As suggested, I had crossed the SectionLevelEditing document. but I don't get anything in the document.

  Even my requirement is condition based on the button Add a new on the CSS tab.

  I tried another way

  (1) I got to add new button id with developer tools (ctl01_CtlInitialPublication1_ctlCollapsibleContentContainer_ctl00_btnAddNew)

  (2) what properties should be used by pulling the new id button.

  I am faced with the question. Please let me know some suggestions.

  Thank you

  Floquet

  In the JavaScript code, could you try to filter by some special keywords in your notification of duplicate instead of code GTIN number # .writing C NET.

  In user interface Extensions, it has only allowed to extend the JavaScript code.

• Hi all, I have 5 LR I purchased with a serial number and a week ago I got the message about a new update, I want to get LR 6 but not the creative cloud, LR4 LR5 to last time it was just an update without having to buy the creative cloud ,

  Hi all, I have 5 LR I purchased with a serial number and a week ago I got the message about a new update, I want to get LR 6 but not the creative cloud, LR4 LR5 to last time it was just an update without having to buy the creative cloud is it possible to LR5 LR6 to? Thank you very much.

  Jeffrey

  Yes, you can buy Lightroom without subscribing to Adobe Creative Cloud.

  To purchase an upgrade to Lightroom 6 from a previous version, please see this link: products .  Scroll to lightroom and click 'buy '. Then click on the selectable text next to "I want to:" and select "upgrade". In the drop-down list, select the version that you are upgrading.  I hope that help.

  Best regards

  Guinot

• All the sites SSL Web I visit displays the message "this connection is untrusted" and shows me a false SSL certificate for a different domain name.

  When I visit a Web site that requires SSL I displays the message "this connection is untrusted". Any Web site that I visit, it's always exactly the same message and the same SSL certificate that she is no longer valid for www.thawte.com

  support.Mozilla.org uses an invalid security certificate.

  The certificate is not approved, because no sender string has been provided.
  The certificate is valid for www.thawte.com
  The certificate expired on 11/11/2011 23:59. The time now is 11:46 28/01/2012.

  When I click "Add the Exception" on a Web site and view the certificate, it is exactly the same certificate with the exact same serial number.

  I had a similar problem with Internet Explorer showing a 404 error when I visited SSL protected pages but to do a restore of the system a month ago to correct this. All other bowsers are / were very good.

  I installed Firefox 3.x month last to test something that is when the problem started. I have since uninstalled Firefox 3.x and reinstalled the latest version. I deleted all the preferences/settings, disabled modules and reinstalled many times. I did a Windows system restore to before that the problem started with no luck.

  The time / Date on my computer are correct. I have no firewall other than the windows one. I had no antivirus (netbook) until I installed a (Avast) yesterday to see if a virus was causing issues (found nothing). This problem arises on any internet connection (tested to work and home).

  Try bypassing the caveat

  or try to use the module Skip Cert error (to jump to the SSL/TLS certificate error page)

  Thank you

  Please check 'Resolved' the answer really solve the problem, to help others with a similar problem.

• HP Pavilion dv2700 laptop displays the message "system CMOS checksum failed" every time you start

  

  Hi @all,

  I have a HP Pavilion dv2700 - kh933ea laptop computer #abv (it is a HP Pavilion dv2799ee Special Edition Entertainment Notebook PC to be exact) that displays the message "system CMOS checksum failed. Press F1 to continue"every time you start the system. My OS is Windows 7 / 32 bit.

  Then I updated my BIOS to version 2.4e, 01-dec-08 Phoenix (the SMBIOS version remained the same before 2.4), but the issue is not resolved. I have attached a screenshot for processor and BIOS versions.

  Can someone guide me on how to solve this problem?

  Thank you very much in advance.

  I don't see the screenshot of your post attachments. Please repost them.

  This error message means that WHAT BIOS is damaged. You will need to have the BIOS flashed in a mobile shop, repair a BIOS or an HP Service Center. Do a search online with Google or Bing repair for a BIOS.  If you keep trying to update the BIOS there will come a time where everything you have a black screen.

• Unable to get the total number of records processed by the processor of trade rules

  Details of the environment

  ======================

  Disqualification Version: 12.1.3.0.0

  
  

  I use a business rules processor to implement multiple business rules on one record and I am looking for a summary of the number of records increased and does not have a specific rule.

  
  To illustrate:
  Suppose there are 2 rules, invalid number in Column1 and valid number on Column2.
  10 records to process and 3 folders don't rule 1 (valid on column1) and 9 entered failure of rule 2 (valid number on Column2).

  In the browser of result of the processor Business, the number of past records and failed is displayed but is not part of the output of the processor itself. In the example above, there will be 1 pass and 9 fail records and given the values of said the total number of records can be derived which is 10.

  This is why the expected output will be:
  Success of failure
  Rule 1:7 (10-3) 3
  Rule 2: 1 (10-1) 9
  Note: The number of records that failed can be derived from the table of the rule ID but I don't know how to get the total number of records in order to calculate the number of records that a given rule.

  I tried to publish the County of acceptance and rejection in the browser of result of the processor Business in an intermediate table and ask the same intermediate table to get the pass and fail values but Disqualification does not allow to write and read the same intermediary object in a single process. What is the best way to get the number of records total handled by the processor business rules? This kind of attributes (that do not exist only in the browser of result) can be included in the output of the processor in the next version of the Disqualification?

  In addition, the intermediate table contains only 1 sheet with pass and failure values while the exceptions which have individual failure on each rule contains 12 Archives. What would be the best approach to merge a single record into multiple records according to the example below?

  Staging table
  Success of failure
  1 9

  Exception table
  Single ID ID rule
  Rule 1 Record1
  Rule 1 Record2
  Rule 1 record Record3
  Rule 2 Record1

  Exception table with: staging Table data merge
  Rule ID ID Unique Pass Fail Total
  Rule 1 1 9 10 Record1
  Rule 1 1 9 10 Record2
  Recording rule 1 Record3 1 9 10
  Record1 rule 2 1 9 10
  
  Please notify.

  Hi Jason,

  The best way to explain how to do this is with an example project (DXI). I'll send you one in offline mode.

  -Mike

• Can I get the total number of records that meet the conditions of a query using the Table API?

  Hello

  A < row > TableIterator is returned when I ask operations using the index of tables. If I want to get the total number of records, I count one by one using the returned TableIterator < row >.

  
  

  Can I get the total number of records directly meets the conditions of the query?

  I can get the total number of records directly the request of the meeting of the conditions of CLI using the command Global table - name tableName - count - index index-name-field fieldName - start startValue-end endValue.

  Can I get the same results using the Table API?

  I used MongoDB and NoSQL Oracle for about a year. According to the experience of the use of these dbs, I think mongoDB querying interface is powerful. In the contras, the query interface is relatively simple, which results is a lot of work that is usually a long time in the client side.

  Hello

  Counting records in a database is a tricky thing.  Any system that gives you an accurate count of the records will have a hotspot of concurrency on updates, namely the place where the counting is maintained.  Such a count is a problem of performance in addition to competitive access problem.   The problem is even more difficult in a system widely distributed such a NoSQL database.

  The CLI has overall command that counts, but does so by brutal force - iterate keys that correspond to the parameters of the operation.  This is how you must do this within the API.  There is not a lot of code, but you have to write.  You certainly want to use TableIterator TableAPI.tableKeysIterator (), because a key iteration is significantly faster than the iteration of lines.  Just one iteration and count.

  If you use TableAPI.multiGet () and a key with a touch of brightness full then, in fact, count the results as they are returned in a single piece (a list).

  Kind regards

  George

• perdir media that came with the license, and I made several downloads of the version most always displays the message is not valid

  perdir media that came with the license, and I made several downloads of the version most always displays the message is not valid

  Error: "serial number is not valid for this product". Adobe Creative Suite

• How to display the total number of rows in the dashboard

  Hello
  
  I have a dashboard report for retrieving the list of projects and details, it grows on a daily basis, instead of users downloading the report and find out the total number of projects, I want to display 'the total number of projects' alone in the dashboard. How can I do?
  
  Also is it possible to do like a pop up or something a little flash news - not necessary, but will be very good if I can do it.
  
  Thanks for your time and your help.

  create a report and a column to write a column invert the function max (rcount (1)). Call this column depending on the position of the column (as @1) in narrative mode.
  You can view only the narrative in the dashboard.

  for flash type of report, you can use the ticker view and call the same column in the view.

  refer to this link to view the total number of records
  http://Siebel.ITtoolbox.com/groups/technical-functional/Siebel-Analytics-l/display-row-count-in-top-of-the-table-view-3704999

  assign points if found useful.

• display the Total number of lines in the first page of the report

  Hi, in obiee, paging will be 1-25. Is there any possibility in obiee to display the total number of lines next to paging. Ex: If the result contains the 120 lines. It should show after paging
  
  Documents 1-25. Total records: 120

  User,

  If this is the very simple case go in narrative display

  In the Narrative section give

  No.Of.Records: @4

  in my case is 4th column: No.Of.Records where fx = max (rcount (1))

  GoTo Compound display click the button Add and align narrative view down to see table

  Thank you
  Saichand.v

• How to display the line number in the form?

  Hi guys,.
  First I fll you in the story so far...
  
  I have a block of data in database named: V_PAYUPLOADHEADER_HP, in the property palette I put in order by facility and warehouse.
  
  I want to display the line number for each record of recoveries, so I do: V_PAYUPLOADHEADER_HP. NUMB, which will contain the line number.
  
  
  Here are some methods I've already tried:
  -First I tried to make a database of field element = O, column name = ROWNUM.
  The result is the jump of integer (1, 2, 5, 3, 4 etc. instead of 1, 2, 3, 4, 5) I think it is because of the agenda that I set.
  I have to keep this order by setting, so I look for another way to display the rownum.
  
  -Then I tried to set the data item = N, column name = null, mode of calculation = formula, formula =: system.trigger_record.
  When I run the value of: V_PAYUPLOADHEADER_HP. NUMB is 1. For all recovered records is 1, 1, 1, 1 instead of 1, 2, 3, 4.
  
  -J' also tried to use the trigger after QUERY attached to the block.
  In relaxation, I have this code:
  : V_PAYUPLOADHEADER_HP. NUMB: =: system.cursor_record;
  When I run the value of: V_PAYUPLOADHEADER_HP. NUMB is 1. For all recovered records is 1, 1, 1, 1 instead of 1, 2, 3, 4...
  
  
  
  Is there something I missed?
  What can I do to display the rownum?

  Hello
  Maintain this point NON-base of DATA and create a trigger on the block called after REQUEST level and use the code below...

  :FIELD_NAME:=:SYSTEM.TRIGGER_RECORD;
  

  -Clément

• How display the date of my last update of OSX in my Mac?

  How display the date of my last update of OSX in my Mac?

  If it was in the last 30 days, the updates will often (not always) show the Mac App store on your page of updates, under the heading "updates installed in the last 30 days.

• Copy from HDD to disc results external hard of different sizes but the same number of records

  Backup hard drive to external drive, 800 GB in total. When finished copying the file on the external drive size is smaller than 40 GB, but there is the same number of records.

  Different disks often present of thisdue fragmentation on each disk and the differences in the block sizes used on each disc. As long as all your data are present then there is no need to worry.

• Display the line number in TextEdit

  I'm trying to twist around the preferences and browsing the web, if there is a way to display the line numbers in the TextEdit application. I could not find, how is it possible to display the line number?

  OS: Mac OS X El Capitan

  No, but the free TextWrangler has add/remove line numbers in the text menu, you could copy of TE & paste in TW.