To filter the data according to the year of the field date of a table

Similar Questions

• Dynamic action on the fields of forms in table form

  Hello guys.

  That I can see on the form fields in a table, I can't perform dynamic actions. What I want is to have an element of the selection list when in the change event, it changes the values for all the records in the report. For example if I have 40 records in this tabular form and I change the value of 'Open' to ' near the field called State, I want to see this change (status value of 'Open' close ') all rows in this tabular presentation. Is this sensible?

  Thank you very much, Bernardo.

  Hello Bernardo.

  There are several ways to accomplish what you want.

  -You can create a PL/SQL procedure to manage an update on all the rows according to the value of the value of your column. I wrote once a blog that can help you with that:

  http://vincentdeelen.blogspot.nl/2013/06/custom-multi-row-processing-using.html

  -You can create a dynamic action with javascript or jQuery to handle the change event.

  The first option is more secure because it is managed by the database, the second is more simple and example adjustable all the entire column for all rows displayed, without the need to refresh your tabular presentation, or your entire page. For course work, you should however have little validation at the end of the database. I also think that it is not possible to set the values of the rows that are not displayed, which would again require some PL/SQL for handling.

  If you need help setting up the dynamic action, please set up an example on apex.oracle.com.

  Kind regards

  Vincent

• Setting the width of the field label

  I have a form on which I have two of my fields (columns) in the same row, using the start on new line = No and field = No parameters for the second field. However, this second field label is has no spacing at each end, so that it starts really close to the value for the first column area and really ends close to the area of the value of its own column. I want to add a bit of space, perhaps to increase the width of the cell holding the 2nd label.
  
  The first obvious option did not work: add empty spaces to the label itself.
  
  I tried to enter s tyle = "width: 275px" and width = 275px in the field attributes of HTML table cell, but none who does nothing.
  
  Running on 4.1.0.00.28.
  
  Any thoughts?

  Mark T. says:
  Any thoughts?

  Providing the following information always helps:

• Full version of APEX
  
• Edition and the full version of DB
  
• (EPG, SST or APEX listener) Web server architecture
  
• Browser (s) / version (s) used
  
• Theme
  
• Model (s)
  
• Region (s)

  Just like any code published in packaging tags\

  ...\
  

  Tags to preserve the formatting and special characters

  Creating an example of apex.oracle.com is the best way to present a problem, especially those related to the HTML structure, page layout and form, the visual style and JavaScript.

  I tried to enter s tyle = "width: 275px" and width = 275px in the HTML table cell attributes field, but none of these makes anything.

  Which HTML attributes table cell? With start on new line = No and field = no. 1 point of control, the point label 2 and the 2nd point control will appear in the same cell, with only the attributes of the 1st checkpoint applied.

  width=275px 
  

  The width for cells in a table attribute is deprecated: use CSS instead. "275px" is also an invalid value for this attribute: value is a number that represents the width of the cell in pixels or percentage.

  The first obvious option did not work: add empty spaces to the label itself.

  Specification HTML load user agents to collapse the white space characters, so several areas will be grouped together in a single space.

  Round this is to use the non-breaking space character entity & nbsp; instead of standard spaces:

  {noformat}&{noformat}nbsp;{noformat}&{noformat}nbsp;Foo{noformat}&{noformat}nbsp;
  

  Another approach would be to apply CSS padding to the label by wrapping it in a spanstyle:

  Foo
  

• Mobile Firefox is unable to filter the results of google by date

  I have mobile Firefox installed on my Nexus 4 side by side with Google Chrome browser. When I do a search on google in mobile Firefox I can't filter results by date, but I can't in Google Chrome browser.

  What Miss me?

  The function to filter the results of google by date is missing from the mobile firefox browser?

  Thank you

  It seems to be part of Google's strategy to dominate the world to retain some features of other browsers. I don't know if there is a solution to force search tools to display in mobile Firefox, but you can try the strategy adopted by another user faced with a deficit of function and use the fake extension to lie to the sites on which browser you use.

  See: Google local search does the same in Firefox as in Chrome. How to repair?

• It is no longer possible to fill in the field "year" (Dutch: "jaar" with a date "1600" or an earlier version.)

  I used to fill in the field "jaar" with the date of origin of a piece of classical music. Many years before 1600 original parts. I spent many hours to fill the years because I have som 35000 tracks in my library. 2015 they was tgo is no longer possible to fill a date prior to 1600. Even worse: all already filled dates are missing.

  I ask reinstall the opportunity.

  lvhout wrote:

  I used to fill in the field "jaar" with the date of origin of a piece of classical music. Many years before 1600 original parts. I spent many hours to fill the years because I have som 35000 tracks in my library. 2015 they was tgo is no longer possible to fill a date prior to 1600. Even worse: all already filled dates are missing.

  I ask reinstall the opportunity.

  Lvhout,

  You seem to be the first person to notice him, but I just tried with iTunes 12.3.2 and found the same problem.

  You can send comments directly to Apple at this link:

  http://www.Apple.com/feedback/itunesapp.html

• How can I filter the data and display it in the html table?

  Hello

  How do I filter data that contains the database table and already displayed in html table, then when the user write a data to filter or search, it will automatically display the data in html table. ?

  can someone help me to do this? Here is my php code for the table that will display the data:

  <?php
    $servername = "localhost";
    $username = "root";
    $password = "pass";
    $dbname = "ses";
     
     
    // Create connection
    $conn = new mysqli($servername, $username, $password, $dbname);
    // Check connection
    if ($conn->connect_error) {
    die("Connection failed: " . $conn->connect_error);
    }
     
    $sql = "SELECT No, Calon, ID, Jurusan FROM candidates";
  
    $result = $conn->query($sql);
    ?>
  
  <?php
    if ($result->num_rows > 0) {
    echo "<table >
  
    <tr>
    <th>NO</th>
    <th>Candidate</th>
    <th>ID Number</th>
    <th>Programme</th>
    <th>Edit</th>
    <th>Delete</th>
    </tr>";
    // output data of each row
    while($row = $result->fetch_assoc()) {
    echo "<tr>
    <td align='center'>" . $row["No"]. "</td>
    <td>" . $row["Calon"]. "</td>
    <td>" . $row["ID"]. " </td>
    <td>" . $row["Jurusan"]. "</td>
    <td align='center'><a href='main2.php?edit=".$row["No"]."'>Edit</a></td>
    <td align='center'><a href='delete.php?del=".$row["No"]."'>Delete</a></td>
    </tr>";
    }
  
    echo "</table>";
    } else {
    echo "0 results";
    }
    $conn->close();
    ?>
  

  hope someone can help me with this.

  Thank you.

  You must first create a search form for the user to enter a search word:

  First name

  Search

  Then create a page named search_page.php and insert the following code into it and save it. The code in red below Gets information from the search form field name = "Calon" and the SQL query finds in the "Calon" database field for a game.

  <>

  $servername = "localhost";

  $username = 'root ';

  $password = "pass";

  $dbname = 'his ';

  Create the connection

  $conn = new mysqli ($dbname, $servername, $username, $password);

  Check the connection

  If {($conn-> connect_error)

  Die ("connection failed:".) $conn-> connect_error);

  }

  $Calon = trim($_POST['Calon']);

  $sql = (' SELECT no, Calon, ID, Jurusan candidates WHERE Calon = "'.") $Calon.' » ") ;

  $result = $conn-> Query;

  ?>

  <>

  If ($result-> num_rows > 0) {}

  ECHO '.

  ";

  each line output

  While ($row = {$result-> fetch_assoc())}

  ECHO '.

  ";

  }

  ECHO '.

  NO.	Candidate	Identification number	Program	Edit	Delete
  " . $row ["no"]. "	" . $row ["Calon"]. "	" . $row ['ID']. "	" . $row ["Jurusan"]. "	Edit	Delete

  ";

  } else {}

  echo "0 results."

  }

  $conn-> close();

  ?>

• Invites you in a view to filter the data of the other view

  All,
  
  I have 2 displays (bar and pie chart) in the same report. I put a prompt on the report where the user can select a date.
  
  Now, I want to display this quick only once on report and use this prompt to update the data in the two views. Where will I put this prompt and how to use it to filter the data in the two views?
  Must be the guest on the report so that the user can select date and time while displaying the report.
  
  Thanks for your help.
  
  Concerning

  I don't think so.
  Perhaps you want to reduce the dialog box, which will force the vertical alignment. No doubt put a logo in the Virgin region or something.

  Concerning
  Poyard

• How do I filter the JTable lines such as changing data

  Hello
  
  all suggestions are welcome, I'm at a bit of a dead-end at the moment.
  
  So, I have a JTable supported by a table model. The data in the table are likely to change while the system is running, when it does certain events are triggered. Table pattern listen to the appropriate events so he could work on what line in the table must be updated, I can call then through the
  

  int row = determineWhichRow( changedDataObject );
  fireTableRowsUpdated( row, row );

  Correctly, this causes the row in the table to be updated. Now, the bit that's not going to. The user is able to activate filters on the table, more precisely on an attribute of the data in this table that changes. So when I raise the updated event I need to my line (with the filter set) re sorter - sort the table. Have a look there is a method on line sorter:
  

  getSortsOnUpdate()

  that the Javadoc, I thought I would create the behavior that I needed - assuming that I told it to return true. This after trying the functionality remains the same, that the data model changes, update the values in the table but the filters don't are not reapplied.
  
  Debugging in the code of the jdk to get an idea of what might happen on this subject seems that filters are called and it determines that the modified line must be filtered, but gets to a point where it was decided that because the event from the table model was an event of update should not call a repaint and resizing method and nothing seems to happen.
  
  I think that simply re-defining the line on the table sorter would cause the desired effect but would be incredibly inefficient with a data model that can potentially change at any time. I can put the specific line number and the jdk version if this will help anyone, but I hope that you all will be able to give me an idea of what I might have missed.
  
  Thank you
  
  Dan.

  Hello

  Thanks for the update and the NBS.

  I tested my 'Hammer' solutions in the SOFTWARE, and they work.

  then sorterChanged is true, nothing is being edited so the first block is not entered, then the second block when a method of resizeAndRepaint - that sounds more useful since it seems that repaint correct is missing - is not entered because the event is an UPDATE.

  It reminds me that referred explicitly to the javadoc for setSortsOnUpdate + "by example, if this is true, and that the user modifies an entry the location of this element in the view can change." The default value is false. ' +, so apparently they had mounting in mind and not other consequences, such as filtered lines by changing the number of lines and the line of the table positions.

  The resizeAndRepaint is only call revalidate and which I've tried first JTable #tableChanged repaint (earlier in the call tree) and call revalidate and paint - I don't know how much of the impact that could have on performance.

  Probably the same impact on one than the other methods of Hammer (I don't know paint involves sorting and filtering, which would frustrate the purpose of caching the results of sorting; have you tried and it works?).

  I also notice in the private method DefaultRowSorter.shouldOptimizeChange () , which is called somewhere at the treatment of the update of the line, that the code checks to see if the change is over one-tenth (and Yes, the ten are hardcoded!) lines and doesn't force not re - sorting so this isn't... With the explicit comment 'changed too, sort all this '. I really wonder how much they paid the consequences of updates when sorting/filtering...

  Tables in general should not have more than a few hundred lines, but there are four of them in the client at any time. There are two different branches of data types and two different periods, the tables are for.
  As you say if this does not work, "hammer" approach is all that remains... Thanks for having the eye well.

  Revisit this point: I don't see how you could save a full repaint anyway: If the results of change of model in the first row being filtered, all lines must be repainted (a place), and even a new line can be displayed at the bottom. Yet once if painting involves sort, has no way around sorting in any case, this isn't worth trying to avoid the kind.
  I agree that this should be handled automatically (and I consider a bug because it's not).

  In fact if you fireRowUpdated (i-1, i) (test quick hacky-ish), you will notice that the two rows are properly painted and shift, but not the rest of the table (which should be moved to the top line). This is clearly a bug, it seems that the JTable only redraws the line range in the case of the update, not taking into account that changes of impluies new kind other indices of line outside this range.

  * In short: rowupdated in the presence of a sorter/filter should involve the use/filtering and if necessary to repaint, of the whole table. and this should be in the stock of JDK, not imposed the application code to find

  Published by: jduprez on June 29, 2011 13:23

• The years between 2 fields calculation date

  I have am trying to create a form in LiveCycle Designer 7 missing persons report.  I want to fill in a text field with the number of years between two dates entered in date/time fields; specifically using the DOB of a missing person and the date they have been seen to calculate their age during the last time.

  Any help would be greatly appreciated.

  Thank you

  Drew

  FormCalc has a "A Value()" function that returns "true" only when the field has been updated, you can add an if statement uses the function 'Value() a' for both fields and return a true result only when both fields have given.

• Update the field Date according to the date of another field

  Hi I have a field called "contract end Date" which I update manually according to the contract, and a field called "notify contract end Date" I want to be updated automatically with the "end of contract date" - 45 days.
  Is this possible via workflow? can someone give me the syntax that works? If I want to manually insert the value of the field 'Date to end the contract to notify' it will overwrite it?
  Thank you, David

  Hello!

  Create your workflow on your object type, select the before saving the trigger modification event, put the following condition:

  [< contract end date >] <>MEADOW ("< the contract end date > '")

  And in action, update the field End Date of the contract to notify with end Date of contract - 45 and check the replacement value. You contract end Date field must be with the type date.

  I hope this will help, do not hesitate to ask for more!

  Max

• How to filter the XML related to drop-down list data source?

  Dear all,

  I quiet new to LiveCycle designer ARE for a few weeks I am working on it.

  Right now I have problem with filering XML Datasource with the drop-down list.

  I have XML files which includes data for the States and the city. I have one of my drop-down list associated with the State. My requirement is that I chose the 'State' the corresponding city names must appear in the second drop-down list.

  I searched the net and got two or three samples on it. But I failed to do my job of form as a requirement. Even if I generated the XML file structure given in the examples.

  Please check the attached xml file that I created.

  I have struckup right away. So, help me do this.

  Very much thanks in advance.

  Kind regards

  Sree Harshavardhana.

  Hello

  Your xml structure is virtually identical to one the week last with a similar question, http://forums.adobe.com/thread/518731.

  I've renamed the fields required in the attached example.

  It will be useful.

  Bruce

• Filter the data that you enter.

  Hello.. I have a task... I want to do the simple text field, that filters the data as I type in...
  It's a kind of research that shows indicators of data in a table
  
  is it possible to do in apex?
  
  I can do without javascript? any suggestions?
  
  THX.

  Hello

  You must download on statistics to workspace files
  http://download.Oracle.com/docs/CD/E14373_01/AppDev.32/e11838/UI.htm#sthref1493

  Then the file is located in the wwv_flow_files table, and you can reference as #APP_IMAGES # #WORKSPACE_IMAGES or # depend on you did file or specific workspace request

  BR, Jari

• Kindly help me with the request to find the data in two tables

  Hello Guru
  
  Kindly help me to recover the data from two tables-
  
  BASEBALL
  LEGAL_ENT_ID (PK)
  GAME_ID (FK)
  LEGAL_ENT_NM
  INACTIVE_DT
  DATE OF INS_TS
  INS_LOGIN
  DATE OF UPD_TS
  UPD_LOGIN
  
  
  FOOTBALL
  GAME_ID (PK)
  BRKR_NM,
  BRKR_ISR_ID
  BROKER_SYMBOL
  INACTIVE_DT
  BRKR_SWIFT_FLG
  BRKR_INTERNAL_FLG
  BRKR_CATEGORY
  UPD_TS
  MINORITY_FLG
  BROKER_TYP
  STATUS
  INS_TS
  INS_LOGIN
  UPD_LOGIN
  APP_USER
  ACTIVE_FLG
  
  and if I want fecth data from these two tables according to the following condition then it is fine with the suite of applications.
  
  1 select distinct values only table of BASEBALL by using the following query.
  
  SELECT DISTINCT B.GAME_ID as 'CLEARING GAME ID', B.BRKR_NM "NAME of THE GAME of COMPENSATION" OF BASEBALL A, FOOTBALL B WHERE A.BROKER_RELATION_CD IN ('FUTBRKR1', 'FUTBRKR2') AND A.GAME_ID = B.GAME_ID
  
  2 Select all the table BRKR_NM OF FOOTBALL as well by using the query - next
  
  SELECT GAME_ID "RUNNING GAME ID", 'NAME OF THE GAME OF EXECUTION' BRKR_NM SOCCER
  
  Now, my query is that--
  
  I want a query that gives me a combination of above mentioned queries... and if I tried to use Union or Union All, then she is not giving me the result as expected.
  
  I like the result to look like who has a few conditions such as -
  1 - the records in the table Football are high vs Baseball table because there is no condition to filter the records of the Football.
  2 - football is a superset of records and Baseball is a subset.
  3 - COMPENSATION NOM_JEU and RUNNING NOM_JEU may return the same values as well.
  
  I want the result to be in the following form-
  
  EXECUTION ID GAME | NAME OF THE GAME TO RUN. COMPENSATION ID GAME | DELETE THE NAME OF THE GAME.
  2123 test1 2345 test5
  2456 test10 2456 test10
  
  
  Thanks in advance. Kindly help me.
  
  Published by: user555994 on January 4, 2011 23:48

  In the output you want.
  All the values of baseball;
  Values of football that are matched;
  But on what condition you want to match?

• How to filter the traces of tension TDMS after acquisition?

  Simple question. We have acquired a lot of electrophysiological data with express signal. We now need to filter data after the acquisition for later analysis. I can import the files TDMS tension of previous experiences, but can't seem to run the filters we used on the side of the acquisition to filter the existing traces. Is there a simple way to do this?

  -smb

  Hello Chinchilla,

  I enclose a few screenshots on how to add a step to an analog input filtering. You can select the type of filter and order too.

  

  In this screenshot you can check how to change the configuration of the filter

  

  Finally, you can access the TDMS of LabVIEW file with one of the examples of PDM. Please follow these instructions:

  1. open LabVIEW

  2 - go to help > find examples to open the Finder 'example '.

  3 - Go to Fundamentals > file Input and Output > TDMS > Standard Read and Write and select the VI named TDMS read Events.vi

  

  You will need to know the data present in the file to read correctly. For this, you can use the leading PDM Viewer VI:

  http://zone.NI.com/reference/en-XX/help/371361K-01/Glang/tdms_file_viewer/

  Or you can use the Toolbox for excel: http://www.ni.com/example/27944/en/ (allows you to transfer the data to Microsoft Excel).

  4. After reviewing the data, you will need to apply a filter. You can find the filter functions in the range of Signal Processing.

  

  Please let me know if you have any questions on this subject.

  Kind regards

• The PXI-8512 does support the series 2 filter or a similar mechanism to filter the messages?

  Hello

  I need to buy a couple of cards CAN interfaces for my test application and I wonder what you choose

  I already used a PXI-8461 to obtain data of the customer model under test, and due to the fact that sometimes the client bus can be very busy, but most of the messages is not interesting for my system that I use currently series 2 comparator/mask/filter to filter only the interesting messages.

  Without this filter, the PXI-8461 often returns an error due to overloading of the bus. With the filter, everything works perfectly

  Now I need to implement several testbeds with this same feature, and I plan to move to the new PXI-8512 for new.

  My question is: is the most recent PXI-8512 a device series 2 institutions? Support the filter 2 series or any other mechanism to avoid problems on the busy bus?

  Thank you for your support.

  Kind regards

  Davide

  Hi Davide.

  the PXI-8512 isn't a series 2 device. The PXI-8512 is a device of the X-NET family. X-NET is the technology whose use OR in support of CAN, LIN and FlexRay with a driver API. Series 2 devices use the former NI-CAN driver that only supports the CAN. All of the new devices are devices X-NET.

  Take a look to the following document:

  NI-CAN for NOR-XNET application migration
  http://www.NI.com/white-paper/9717/en

  On this page you will find the following statement for the function that you are already using:

  Transceiver filters were traditionally indicated for applications where only a few CAN IDs have been considered on a bus high load. In some cases, material NI-CAN support the bandwidth of the full bus, which leads to a buffer overflow. The hardware architecture OR XNET uses the engine NOR-XNET DMA-driven to eliminate the occurrence of buffer overflows. CAN of NOR-XNET interfaces are able to handle high load bus and transmitting at the maximum rate without coupling to buffer overrun. If your applications use the hardware filters extensively, NOR recommend setting up CAN opposes, or by reading the bus while using Network Interface objects. The best option for these applications is to modify your code to use the API OR-XNET native.

  Best regards, Stephan