To get this message when trying to install itunes. Help, please

Similar Questions

• ' C:\WINDOWS\SYSTEM32\RUNDLL32. EXE'getting this message when trying to open files and the control panel.

  This is the message I get when trying to open a file or trying to access the control panel

  Hi NANCYPERRY,

  See the article after some troubleshooting:

  http://support.Microsoft.com/kb/812340

  I hope this helps!

• I get this message when trying to open the catalog, lightroom version 6 unexpected error opening I use a mac. I tried to use an earlier version of lightroom still get the message.

  I use lightroom 6 and cannot open my catalog, I get a message ""unexpected error opening catalog " I have a mac OS X version 10.10.4 Yosemite I tried to use an older version of lightroom and am still getting the error message."

  Jackie, try to open the new catalog, and then 'import of catalogue' the problem we... Let us know how it goes, or how far you get with it.

• I get a message saying "the service cannot accept control messages" when trying to install AVG. What could be the cause?

  I get a message saying "the service cannot accept control messages" when trying to install AVG. What could be the cause?

  original title: error message

  Hello cd1968,

  Here's what he says about this error in the MSDN library (http://msdn.microsoft.com/en-us/library/ms833805.aspx):

  Explanation:

  There is a lag between the requested control and service control status. The service may be in a State of waiting to start, shutdown - pending or stopped.

  User action:

  Wait a few minutes and try your operation again.

  In other words, wait a bit and try again.  You can also try to reboot (be sure to allow time Windows to load completely) and then try to install it.

  Thank you
  Darin

• After you install a Foxfire 5.0 update, I get this message when you try to open Mozilla: the procedure entry point sqlite3_db_status could not be located in the dynamic link library mozsqlite3.dll.

  I get this message when you try to open Mozilla: the procedure entry point sqlite3_db_status could not be located in the dynamic link library mozsqlite3.dll.

  Do a clean reinstall.

  Download a new copy of Firefox and save the file to the desktop.

  • Firefox 5.0.x: http://www.mozilla.com/en-US/firefox/all.html
  • Uninstall your current version of Firefox.
  • Do not remove the data of a personal nature when you uninstall the current version.

  Delete the program folder Firefox before installing newly downloaded copy of the Firefox installer.

  • It is important to remove the Firefox program folder to delete all the files and make sure that there is no problem with the files that were the remains after uninstallation.

  Your bookmarks and other profile data is stored in the Firefox profile folder and will not be affected by a relocation, but make sure that you do not select delete data of a personal nature if you uninstall Firefox.

• We are unable to validate this serial number for adobe lightroom. I just bought the upgrade to lightroom and get this message when installing

  We are unable to validate this serial number for adobe lightroom. I just bought the upgrade to lightroom and get this message when installing

  Fortunately the Adobe customer service has been able to help me by making a change to my hosts file.

• I try to install my software bought, but I get this message when I try to install

  I just bought the Production Premium for my Macbook Pro, but I get this message, I tried to restart my system and tried to install the software several times without success. Any ideas?

  Exit code: 7 - Summary - 1 fatal Error (s), 2 error (s), 3 warnings WARNING: DW031: payload: Adobe XMP panels CS5 3.0.0.0 {6A2E619B-E4AC-433B-A648-D458CE543A96} has been updated and has been selected for repair. The {5C0FEBDA-5A0E-4FC8-91CB-229A4C1561E9} patch Adobe XMP panels CS5_3.1_AdobeXMPPanelsAll 3.1.0.0 are uninstalled now. WARNING: DW031: payload: camera profiles Installer 6.0.0.0 {3F023875-4A52-4605-9DB6-A88D4A813E8D} has been updated and has been selected for repair. The {A189C479-C7CD-4E08-8CCF-D999B68C0C71} patch camera profiles Installer_6.3_AdobeCameraRawProfile6.0All 6.3.0.0 are uninstalled now. WARNING: DW031: payload: Photoshop Camera Raw 6.0.0.0 {37AB3C65-E02C-4DCF-B0E0-4C2E253D8FA3} has been updated and has been selected for repair. The {FD58D99B-9927-4226-8E00-959A4F76BD89} patch Photoshop Camera Raw_6.3_AdobeCameraRaw6.0All 6.3.0.0 are uninstalled now. ERROR: DW020: found payload conflicts and mistakes: ERROR: DW020:-Adobe Flash CS5.5 depends on Flash Player must be installed. FATAL: DW020: conflicts were found in the selected payloads. Stop the installation. -------------------------------------------------------------------------------------

  I had to uninstall adobe stuff (software free trial) and after that, it worked fine. Thank you very much

• I can't connect to the internet, get a message when trying to connect it says windows cannot access the specified device

  I get a message when trying to connect it says windows cannot access specified device.you may not have permissions appropriate to access them on my laptop

  Hi MelissaBoltik,

  ·         What is the exact error message?

  ·         Did you do changes on the computer before the show?

  Follow these methods.

  Method 1: Temporarily disable the security software.

  Note: Antivirus software can help protect your computer against viruses and other security threats. In most cases, you should not disable your antivirus software. If you do not disable temporarily to install other software, you must reactivate as soon as you are finished. If you are connected to the Internet or a network during the time that your antivirus software is disabled, your computer is vulnerable to attacks.

  Method 2: Perform a clean boot to see if there is a conflict of software like the clean boot helps eliminate software conflicts.

  How to configure Windows XP to start in a "clean boot" State

  http://support.Microsoft.com/kb/310353

  Note: After the boot minimum troubleshooting steps, follow section How to configure Windows to use a Normal startup state of the link to return the computer to a Normal startupmode.

  After the clean boot used to resolve the problem, you can follow these steps to configure Windows XP to start normally.

  (a) click Start and then click Run.

  (b) type msconfig and click OK.

  (c) the System Configuration Utility dialog box appears.

  (d) click the general tab, click Normal Startup - load all services and device drivers and then click OK.

  (e) when you are prompted, click on restart to restart the computer.

  Method 3: Follow the steps in the article to reset the TCP/IP settings.

  How to reset the Protocol Internet (TCP/IP)

  http://support.Microsoft.com/kb/299357

• "Can not open AsIO.sys (2)" I get this message when I log in after a reboot. I have search for the file, but can't find it with the research or the command prompt. What do do in this file, and can be created and put into the appropriate folder?

  "Can not open AsIO.sys (2)" I get this message when I log in after a reboot.  I have search for the file, but can't find it with the research or the command prompt.  What do do in this file, and can be created and put into the appropriate folder?

  Hi Jack,

  This driver belongs to AsIO.sys Asus Probe. Try to uninstall Asus Probe and if you need, install again. If this does not help, uninstall Asus Probe and other tools of control such as Speedfan. Open the registry (regedit.exe) editor and search for AsIO.sys and remove all the entries that you can find.

  André
  "A programmer is just a tool that converts the caffeine in code" Deputy CLIP - http://www.winvistaside.de/

• Just bought an upgrade to LR6 and get this message when I try to download: there was an error loading your downloads

  Just bought an upgrade to LR6 (DESKTOP VERSION) and get this message when I try to download: there was an error loading your downloads

  It's very annoying! Anyone know what I need to do?

  Hi HT_photo,

  We will be happy to help you, but before that, there are a few information such as:

  What is the exact error code/message? Please attach a screen so that we can help you better and fast. See, the specified item was not found.

  What operating system you are using the version?

  Until then you can you please consult the links below:

  Troubleshoot Adobe download

  Installation and launch log errors | Adobe Creative Suite 6, Adobe Creative Suite 5.5, Adobe Creative Suite 5

  Error in downloading, installing or updating Adobe Creative Cloud applications

  Let us know if that helps.

• After a virus scan I now get this message when I go to my Outlook Express: error number: 0x800CCC90

  After a virus scan I now get this message when I go to my Outlook Express... I can't bring in mail or send... Thanks a lot for all the help... Dave

  The server responds with an error. Account: "pop.embarqmail.com', server: 'pop.embarqmail.com', Protocol: POP3, server response: '-ERR cannot establish TLS with POP server 208.47.184.129:110, SSL_connect error 5', Port: 110, secure (SSL): no, Server error: 0x800CCC90, error number: 0x800CCC90

  In addition to the suggestion of Firedog, after disabling email scanning (see www.oehelp.com/OETips.aspx#3) you may need to remove your e-mail account, close and reopen OE and then add it back back.

  Steve

• I need help fixing error 340... only, I get this message when I try to send an email... there at - there a way to fix this error free?

  I need help fixing error 340... only, I get this message when I try to send an email... is possible to fix this for free?

  You must ask Yahoo.
   
  Yahoo support
  http://help.Yahoo.com/l/us/Yahoo/helpcentral/ 

• I keep invited by the missing "sliprt.dll" message when trying to install Adobe flash player

  I keep invited by the missing "sliprt.dll" message when trying to install Adobe flash player... Please help!

  Original title: sliprt.dll lack of any help?

  You can take a look at the following link:

  http://answers.Microsoft.com/en-us/Windows/Forum/Windows_7-hardware/how-to-install-missing-sliprtdll-file/27830979-e1cf-4c94-A074-12f6d7272065

• Why I get this message when you use the magnetic lasso tool: "WARNING: no pixel is selected to more than 50 percent."  The edges of the selection will be not visible. ?

  Why I get this message when you use the magnetic lasso tool: "WARNING: no pixel is selected to more than 50 percent."  The edges of the selection will be not visible. ?

  See here:

  WARNING: no pixel is selected more than 50%

• because I get this message when I load my site "may be missing some files on the server or incorrectly" help me please

  because I get this message when I load my site "may be missing some files on the server or incorrectly" help me please

  "Some files on the server may be missing or incorrect" Warning Message