To maximize independence, should I fully charge my case smart battery before the first use?

Similar Questions

• What should I enter for "User Name" when you install the first 12 items on a Windows 7 computer?

  What should I enter for "User Name" when you install the first 12 items on a Windows 7 computer?

  Thank you

  TS

  Kglad

  I used the default value presented to me (computer username) and installed fine.

  Thanks for your comments.

  Concerning

  TS

• charge battery for the first time and the best practices for maintaining the life of the new PC laptop battery

  Received my first laptop as a gift today (Pavilion touchsmart 15-n287cl).  You need to know 1.  How long to charge it for the first time or first several times; 2 do you need to unload and reload between each use completely and how long should it take to charge an average before being used again.  3. Since no instructions is a good idea to leave it plugged when you use all the time or the battery should be removed to improve the conservation of life?

  Thank you in advance, it has taken a lot of time to migrate from the desktop.  Want it to be a positive experience.

  Hello

  Modern batteries and chargers are now smarter than you.

  1. you can plugin and immediately to use the machine, the machine will stop charge when the battery is fully charged.

  2. No, we don't need to unload completely between uses, then as above. The recommendation is sometimes we run machine on battery until that up to 10%.

  3. when using AC is a way to protect the unit during the failure of current, all of a sudden, leaving battery on laptop.

  Please read the following article:

  http://BatteryUniversity.com/learn/article/how_to_prolong_lithium_based_batteries

  Kind regards.

• New slate6 never been charged or can be downloaded on the first day

  Today I bought and the dealer asked me to load it and mobile 6 Slate, but after 3-4 hours of battery charge is always 0% and my brand new laptop today I bought cannot be turned on. ... no use load than the charger works well on other mobile...

  Please return to the dealer and request a new one in Exchange. You shouldn't have to deal with repairs under warranty on a new device. HP will more than likely replace by a unit "delivered to nine or re-certified factory", not a new.

  Kind regards

  Louis

• OLIVIER 11.1.1.7.1 - load Plan "From field only and charge (SDE and SIL)" fails at the first stage

  Hello

  I'm BIAPPS 11.1.1.7.1 configuration and her charge leading "extract domain only and charge (SDE and SIL)" (started in Confugration Manager) fails with the following error.

  ODI-1519: series step 'Load start Plan (InternalID:683500)' failed because step 'Refresh Global Variable (InternalID:684500)' child is in error. ODI-1529: updating of the variable 'BIAPPS.13P_CALENDAR_ID' failed: to select WHEN "Refresh of the Global Variable" in (select distinct group_code from C_PARAMETER_VALUE_FORMATTER_V where PARAM_CODE = '13P_CALENDAR_ID') THEN (select param_value in the C_PARAMETER_VALUE_FORMATTER_V where PARAM_CODE = '13P_CALENDAR_ID' and group_code = 'Global Variable Refresh' and datasource_num_id = ' #BIAPPS.) WH_DATASOURCE_NUM_ID') ELSE (select param_value in the C_GL_PARAM_VALUE_FORMATTER_V where PARAM_CODE = '13P_CALENDAR_ID' and datasource_num_id = ' #BIAPPS.) WH_DATASOURCE_NUM_ID') END of the double ODI-1533: Error refreshing variable 'BIAPPS.13P_CALENDAR_ID': could not get a link to the logical schema "CM_BIAPPS11G" using the OVERALL context.

  Investigation when I looked for info of logical connection diagram CM_BIAPPS11G (Physical schema BIAPPS_BIACOMP) in the topology Manager, JDBC connection string is empty and name of user and password is set up. My questions are so

  (1) is this a normal behavior that CM_BIAPPS11G receive the JDBC connection string & name of user and password of dynamically at run time?

  (2) If yes then how this string is passed and where it get stored?

  (3) I'm tempted to the name of user and password string / JDBC hardcode in the ODI topology manager and kickoff of work load here. Do you see any risk in doing this?

  Any pointer/suggestion will be highly appreciated.

  Thanks and greetings

  JDBC and name of username/password used to store in rather logical physical then diagram... its ok to hardcode those details under physical schema...

  Just logic diagram retrieve this information at the time of execution to load data in temporary tables...

  Please let me know if I'm wrong...

  See you soon!

  SH! going

• I am in charge for the first time.  How long should it take?  I check battery during the charge percentage?

  I'm charging my Apple Watch 1 for the first time.  It has been more than 2 hours, and it shows the green lightning when I touch the face.  How long does take to recharge?  Is there a way to check the level of the battery during charging?  How can I tell when it is fully charged?

  You can take a look at this page of the Apple Watch user's Guide. http://help.Apple.com/watch/#/apd2b717523a

• Satellite L650D: how long I leave it on charge for the first time?

  recently bought this computer series Toshiba Satellite L650D and I was wondering how long I leave on the royalties for the first time to power?

  Help, please

  Hello

  My laptop is still connected to the power adapter, so would always charge the battery.
  But usually the battery led turn green if the battery should be fully charged.
  Let the adapter connected until this witness would turn to green or blue (based on the model that you bought for)

• Question on the first battery charge on Satellite A110-195 times

  Hello!

  I just bought an A110-195, and I heard that I have to charge the battery for the first time without operating the computer. If it is true, how much time I have to load it? Thank you!

  Hello

  I recommend you to check the user's manual page 6-8. It is described that you need about 4 hours (charge time) if the device is OFF.

  Please read any battery notice you will find.

• Watch is not lit and it is fully charged

  Hi, my watch is fully charged, and I went to put it on and noticed it is empty and it lights up at all.

  Hello

  Follow the instructions below...

  If your screen is black or frozen

  If your Apple Watch is in the reserve market or has a low battery, it will not respond to the action of the wrist or taps on the screen. To reactivate your Apple Watch, press the side button. You should see the time on the screen.

  • If you see all the time, you should leave the Power Reserve. Continue to hold the button until you see the Apple logo. It may take up to 10 seconds.
    
  • If you see next time, you need to load your Apple Watch.
    

  If you still need help, try to force your Apple Watch to restart. Hold the digital Crown and side button at least 10 seconds until you see the Apple logo. Force your Apple Watch to restart will not erase information or return your unit to the factory settings. If you see the Apple logo, but your Apple Watch shows a black screen after it restarts, and you hear a description of what is on the screen, the VoiceOver screen curtain may be on. To turn off VoiceOver:

  1. Open the application shows on your iPhone.
  2. Tap general > accessibility > VoiceOver.
  3. Turn off screen curtain, then disable VoiceOver.

  If you do not have your iPhone, you can ask Siri to turn off VoiceOver:

  1. Press and hold the digital Crown until your Apple Watch taps you.
  2. Say 'Disable VoiceOver.'

  If your Apple Watch lights up but hangs when starting

  If you see the Apple logo or a red exclamation when starting and your Apple Watch seems to restart or never completely starts up, contact Apple technical support.

  Above information from here > If your Apple Watch does not respond or won't turn on

• HP ENVY notebook - 15 t-q400 CT: fully charged battery must be disconnected or not?

  Hello

  I have a battery of reagarding question. I want to know when my complete device charged then its load stopped? and his converts to the direct power? or again, it loads is not good for my battery?

  What should I do when my HP Evny fully charged device? Should I do it unplugged or not?

  Thank you.

  Hello:

  Here is a link to the HP battery care Guide... It will give you advice on how to get the life the most out of your laptop battery.

  http://support.HP.com/us-en/document/c00596784

• Battery fully charged but Equium M50 starts

  Hello

  I'm looking for some help with a battery problem.

  A couple of days, I was using my pc and is going to move in the kitchen, but as soon as I unplugged the AC cable unplug the laptop has been cut.

  I checked and it says the battery is 100% / full power.

  This happened to someone else or someone know what is causing this / how to fix it?

  Thank you.

  Hello

  First of all, if the laptop is connected to the power adapter then it should run and it lights without the use of the battery!

  Second, if the battery is old it might happen that he was running only for a few minutes even it s fully charged.

  Happens to me too my battery is about 6 years old and he says that a single minute. Then it s empty.

  I know that I have to replace it, but the battery is not very important for me because my old laptop is still on the table and still connected to the power adapter.
  If I can live with the bad battery

• HP pavilion x 360: works with a fully charged battery

  Hi, when I work connected to AC with the battery fully charged, it damages the battery? or the load is stopped and I get HQ directly to the PC?

  Thank you!

  Hi @avisaf,

  Thank you for your inquiry.

  There is no harm in the use of current alternative when the battery is fully charged. Once the charge is completed it stop the load until the battery again reached a specific parameter, date on which it will begin to load it again.

  He stops the load cells when they are full and gives more power when they are too weak. Prevents them from short circuit or having too much power from their part. The best thing about Li - ion cells is that you can just reload them here and there, giving them a bit of power every so often, a full charge. They are how to always have a life expectancy of so many cycles and so eventually lose their charge max (read once you run the battery for).

  One thing essential to consider (depending on where you live) East of power cuts, if the computer you suddenly lose power, it is not healthy. Ditto for your laptop, if you have removed the battery. The battery works as a UPS (uninterrupted power supply) so you can always use your laptop and turn it off safely.

  All rechargeable batteries have a limited number of charge cycles and should be replaced.

  Here is a link to HP - laptops test and calibrate the battery (Windows 8) if you need.

  To say thank you for the reply, please click on the thumbs upwards the button below.

  If you think that I addressed your concern, please choose the solution provided to help other people to find this information

  Concerning

• How to detect that Illustrator.Application is fully charged (VB)

  Does anyone have a trick they use to determine that the app is fully charged? There is a method available that I might be missing? I got most of the time, but I'd like to get this issue caught in the trap. Looking for a method available in the API to script Illustrator preference. In VB Try/Catch does not in this case...

  Thank you!   -TT

  (CC2014, VB.NET on WIndows 8.1.)

  If after investigation a little more and understanding (and little sleep), I came with a VB code to solve my dilemma. Here is the code:

  

  Actually, my biggest problem was self-inflicted, as I had somehow the updated UI VS throwing exceptions, even on exceptions handled, leaving virtually no one to blame but myself. :-(

  ImageCollection wrote:

  I should more with vb as it has potential external JS.

  Let us know how you go.

  Qwertyfly... -Thanks for your response here. I really hope you do more in VB, because it gets pretty lonely here on this forum. :-)  Please let me know if you ever decide to get involved with VB. I'd be happy to help you to help you get started. :-)

  -TT

• If the battery is fully charged charge can it continue to be plugged?

  Maybe the battery can be damaged if she continue to be plugged to the charger unit once it has been fully charged?

  No, it will not damage the battery.

  You can reload at any time, for any period of time.

  You can use the computer while loading.

  Don't deplete the battery at a low level.

• My IPad sudenly turned off and will not restart. It is fully charged.

  My IPad sudenly turned off and will not restart. It is fully charged.

  What you have tried so that he could begin until For example you soft-reset/reboot trieda? Press and hold the home button and sleep for about 10 to 15 seconds, then the Apple logo will appear if all is well and it will start.