Toggle the Synaptic touchpad

Similar Questions

• Difficulties to download the Synaptic touchpad

  My touchpad is very sensitive, and in the search for a solution, the HP Web site guided me the following instructions:

  Make sure the Synaptic TouchPad software is in use

  Hello

  This would seem to relate to the ALPS to the device which is strange!  I think it would be interesting to try to reinstall the driver ALPS.

  First, download the driver from the link below and save it to your desktop.

  FTP://ftp.HP.com/pub/SoftPaq/sp37501-38000/sp37794.exe

  Now, open windows control panel, open Device Manager, open "mice and other pointing devices, right-click on the pointing device and select Properties. Click the driver tab and then click on uninstall.  Once done, do not restart the laptop.  Go back on the desktop, right-click on the Setup program and select "Run as Administrator" to launch the installation.  Once this done, restart your computer, open windows control panel and open the mouse settings to see if you have a tab on the ALPS pointing device available now.

  Looking forward to hear from you.

  Kind regards

  DP - K

• Cannot perform the specified command when I try to install the synaptic touchpad driver

  My led pen touchpad on my net book of HP compaq 2710p has stopped working. I downloaded the latest version of the HP driver, but when I try to install it I get the message "synaptic touchpad driver v13.2.6.2 could not execute the specified command line.

  A question for HP support, or their forums

• TouchPad Driver installed, but the synaptic ClickPad not found

  I have a problem with my touchpad. I already install the synaptic Touch pad. The touchpad is not more intelligent (can not perform gestures / sensitivity adjustment).

  When will 'Control Panel' > 'Mouse', the "Synatic Clickpad" tab isn't there.

  Please answer as soon as POSSIBLE. TQ.

  Hello:

  See if you install the most recent driver directly from synaptics works.

  http://www.Synaptics.com/resources/drivers

• Pavilion dv6 synaptic touchpad disable the shortcut no longer works

  Hello

  I had a few problems with this computer, tried everything finally uninstalled and reinstalled windows (7).

  I used to use the shortcut fuction - double click on the upper left corner of the synaptics touchpad to turn it on and the.

  Because windows was re-installed the shortcut works more I can't turn it off! typing is horrible cause I keep hitting the button accidentally and my mouse goes everywhere, but I need to turn it on as well for when I do stuff on the show without the mouse.

  I think the guy who re-installed windows for me disabled an option because I cannot get the biometric finger-key thing to work now.

  Please someone tell me how to activate the shortcut touchpad option on! I looked under "mouse" in the control panel and tried to search for "touchpad", etc. "synaptic" in the start menu;. but no dice.

  Please, this is driving me nuts (taken as 20 minutes to write this)

  Hello

  First, download the latest installer driver Synaptics, on the link below and save it in your downloads folder.

  http://ftp.HP.com/pub/SoftPaq/sp55001-55500/sp55107.exe

  Then, open windows control panel, open programs and features, If you see an entry for "Synaptics Pointing Device Driver", right click and select uninstall.

  When this has completed, restart the laptop.

  When windows has completely recharged, open your download folder, click with the right button on the setup of Synaptics and select "Run as Administrator" to launch the installation.  When this has completed, restart the computer again.

  Now, you need to configure the touchpad as described in the HP document on the following link.

  Configure the ClickPad.

  Kind regards

  DP - K

• Satellite P200-1 has 2 - utility to toggle the touchpad for Windows 7

  Hi all

  I have recently installed Windows 7 on my Toshiba Satellite P200-1 a 2.
  I always have an optical mouse connected to my laptop and every time I write, that I keep hitting the touchpad with my palm/finger any. The power touchpad device [pilot | http://nordic.computers.toshiba-europe.com/innovation/download_driver_details_smp.jsp?LNG=19&service=ND& SelCategorie = 2 & selFamily = 2 & selSeries = 152 & selProduct = 746 & selShortMod = 533 & language = 11 & selOS = all & selType = 167 & yearupload = & monthupload = & dayupload = & useDate = n ull & mode = allMachines & search = & action = search & macId = & country = 6 & selectedLanguage = 11 & type = 167 & page = 1 & part _number = PSPB6E-02J023N5 & product_id = null & ID = 60770 & DISO = 10 & driverLa = 13 language] is only for WIndows XP and when I tried to run on my Windows 7 x 86 , he told me that * EBLib.dll* was absent.

  * Is there a way I can turn off my touchpad? Either through software/driver etc.*
  Thanks a lot guys

  -Simon

  Hey Buddy,

  As far as I know the utility power touchpad is designed only for Windows XP and not Vista or Windows 7...

  Usually the touchpad off automatically when a USB mouse is connected. This option can be set in the touchpad driver. If you need to install the driver for the touchpad Synaptics and Alps Electric of Vista for your model.

  After that, check the settings for the touchpad for this option!

• HP g6-1b68nr KNOW SYNAPTIC TOUCHPAD...

  SYNAPTIC TOUCHPAD TIPS g6-1b68nr - function still portable great!  EXCEPT -

  It's 3 years since I purchsed 2 exactly the same Pavilion g6-1b68nr notebooks. One that I have used myself and it has TOUCHPAD intact SYNAPTIC functions; works very well.

  The other I just started to use again (different House) but Synptics are still missing from the search menu.

  Looking for the right HP or any other link secure, to reinstall the software, or perhaps, all that is needed is update driver? I'm not sure.

  Thnx for any advice. Today is December 10, 2014

  Hello:

  All I can say is that your laptop is supposed to have a Synaptics touchpad/mouse.

  http://h10025.www1.HP.com/ewfrf/wc/softwareDownloadIndex?softwareitem=ob-100216-2&cc=us&DLC=en&LC=en&OS=4063&product=5128912&sw_lang=

  If you want to try the latest version of the driver you can get it to Synaptics on the link below.

  http://www.Synaptics.com/en/drivers.php

• Synaptic touchpad on gateway tablet is not recognized by windows 7

  I have a gateway tablet that uses a Synaptic touchpad.
  I downloaded the latest synaptics drivers and installed but it seems that Windows does not recognize that I have a touchpad.
  Under the hardware in the mouse properties I see that:
  HID: Fine Point Innovations Tablet: my pen
  HID: USB input device: mouse USB My
  I think that there should be a 3rd device in the list that says HID: Touchpad or something
  There is a Synaptics device settings, but all the buttons are grayed, as it does nothing to actually apply the settings to.

  I am aware that there is a shortcut: Fn + F7 to enable and disable my touchpad. I tried both ways and tried to search the hardware changes but NO luck :(

  I had Win 7 RC b4 and had the same problem. I tried several methods at that time to fix it, but none of them worked. I have since made a clean install and don't have my mouse touchpad not working at all.

  Help, please... I'm pretty sick of carrying a mouse everywhere

  Hi nivurad,
  
  In the Web of Synaptics site, it is mentioned that the Synaptics device driver is customized to meet the specific requirements of the manufacturer of your device. To make sure get you the device appropriate for your system, driver download your device driver Synaptics support to your system manufacturer's website.
   
  See: http://www.synaptics.com/support/drivers
  
  You may need to contact the manufacturer (Gateway) laptop to download your Synaptics device driver.
   
  See: http://support.gateway.com/s/Mobile/Gateway/M280/1008547nv.shtml

  Also, check if the laptop Gateway (exact model number) is compatible with Windows 7 and check if the drivers are available for Windows 7 by using this link: http://www.microsoft.com/windows/compatibility/windows-7/en-us/default.aspx

  
  Aziz Nadeem - Microsoft Support

• Installation of the synaptic driver failled why?

  Hello

  I have question... days ago .few I bought a new HP PAVILION core i3 laptop 3rd generation... after 1 day pad doesnot work properly then I uninstall the synaptic driver and install the new one synaptic Web site compatible with windows 8.but after installation it says "installation failed"... kindly solve...

  one last thing after having removed the synaptic driver my touch pad working properly like before

  Hello

  Thank you for your help... my touchpad works with the default driver of victory 8 and it works much better than synaptic...

  I am very pleased that you have taken interest in my question... .thank you for your concern :)

• How to toggle the FN button without pressing FN on Satellite Pro

  Hello

  I use my laptop Toshiba Satellite Pro for coding and to do the key on the keyboard F11 to debug code.
  The problem I have is I hold the FN button before I can press the F11 key.

  I would like to know if there is a way to toggle the FN button on so I don't have to hold it down?

  Thank you

  You use Win8?

  What model of laptop do you have?

• Re: How to reset the HP Touchpad

  I have a ProBook s 4540 with windows 7 porfessinal and want to set the sensitivity of my touchpad, but impossible to find the properties of touchpad anywhere

  roferosa wrote:
  

  I have a ProBook s 4540 with windows 7 porfessinal and want to set the sensitivity of my touchpad, but impossible to find the properties of touchpad anywhere

  Hello and welcome to the HP support community.

  Your question is about a HP laptop, and this card is on the HP TouchPad tablet.  I'm moving your suitable position on the Board of Directors.

• G780 keyboard does not work, but ONLY if the Elan Touchpad driver is installed.

  I have a bad surprise today--unlike other manufacturers, which offers one year free tech support, Lenovo does not. $179 for a contract or $89 to cover an isolated incident. Thank you, guys. :-/

  Here's my problem.

  G780, bought last October. Upgrade to Win7 Home Premium Win8 Pro.

  A few days ago the integrated keyboard has stopped working. It works in the BIOS, but when you start in Windows, Windows does not recognize it.

  There is a PS/2 keyboard driver and device keyboard HID that appear in Win8 Device Manager. I guess these are the drivers for the built-in keyboard. If I plug in a USB keyboard, it appears in the device as an additional device keyboard HID Manager.

  By trial and error, I discovered that the keyboard still works fine when the Elan touchpad driver is not installed. The problem with THAT: I can not disable the touchpad unless the driver is installed, and if the touchpad is not disabled, it will screw me up because I accidentally brush my hand against the touchpad while typing.

  I also noticed that sometimes the touchpad in the system tray icon with a WARNING icon overlaid on top of it (you know, the little yellow triangle with exclamation point). I can't understand why, and I can't understand what has changed on my computer that caused the keyboard to stop functioning properly.

  I tried uninstalling the Elan touchpad driver, download the latest driver from support G780 web page and put it back. No luck.

  I make do with a USB keyboard at the moment, but I really need this problem is resolved.

  Thanks in advance.

  So I had uninstalled the drivers of momentum earlier... yesterday I tried to reinstall those supplied with the computer.

  At least the keyboard worked now, but the drivers have not been properly disable the touchpad when I plugged the mouse.

  Then I hit Fn - F6, not really thinking that he would do anything, but it fixed the problem.

  I would have but the pilot would have overridden some setting I put with Fn - F6, but... maybe not.

  Problem solved.

• Toggle the scrollbars application programmatically

  Hello

  Right now, I need to change some of our customized in LabVIEW 2010 tools to work on lower resolution screens. The auto resizing feature is not really an option that it distorts most of the features of the user interface. I looked at the addition of a vertical/horizontal scroll to the application bar, and that seems to be what I need reasonably well. Unfortunately for those who do not have screens high resolution, I would like to really as for the scroll bars to activate. Is there a way to toggle the scroll bar vertical or horizontal of an application programmatically? I can see what is possible for the controls, but did not find the option for effective enforcement.

  Thanks in advance for any help you can offer.

  Kind regards

  Shane

  Hello!

  Check to see if it can do the trick

• How to create a shortcut to toggle the sound device?

  Anyone have any suggestions on how to create a shortcut to toggle the USB audio device in Device Manager?

  A shortcut is to enable this device, and the other shortcut is disable this device.

  Thanks for all the suggestions

  Hi oem7110,

  · Why you want to create a shortcut to enable or disable an audio device from Device Manager?

  You will be able to create the shortcut to Device Manager but no shortcut to enable/disable a device in Device Manager:

  a. right-click on the space empty where you want to create a shortcut

  b. click the shortcut

  c. in the type of space empty in devmgmt.msc

  d. click Next and follow the instructions in the wizard.

  With regard to:

  Samhrutha G S - Microsoft technical support.

  Visit our Microsoft answers feedback Forum and let us know what you think.

• The Synaptics Touchpad in Acer Aspire One does not not after the installation of the wireless mouse.

  After you install a HD on my Acer Aspire One wireless mouse, the Synaptics Touchpad works not at all even if feataure troubleshooting indicates it works correctly.  Default is always to the wireless mouse. I tried to deavtivating the wireless mouse and reset to factory manufacturer.  This does not re-enable the Touchpad.

  Try Fn + F7. This option turns the touchpad on and outside.