Toner bottle collection

Similar Questions

• HP LaserJet CP6015n: Top of the page paper problem pinting

  Hello

  We have some problems by printing CP6015n. We get a green bar on top of paper. You can see the attached picture. Transfer kit have 59% remaining.

  Concerning

  

  The mechanism that cleans the transfer belt is part of the transfer belt.

  There is a long flexible cleaning squeegee that wipe the toner in a channel and then Strawberry goes out the toner bottle for sewage.

  In your case it looks like a section of the blade does not, or perhaps the toner is never out of the channel and so much put in place he'll be back the belt on the weakest point.

  Because it seems that the belt has not and is not at its end of life, you might be able to get it replaced under warranty.

• Videos no longer work once the project is hosted (Captivate 9)

  Hi all
  

  I built, published a hosted online which seems to me to be a fairly simple non - LMS.

  It is pretty much a straight overhaul of an older project was in need of a new look and feel, design and update of content. But the videos I use in Version 2.0 are the same exact files used in version 1.0.

  I appointed carefully and videos (mp4s) organized and placed throughout the presentation using media > video > video event > Browse (progressive download video).

  Preview mode and published project worked fine, however I noticed that at the time of publication, the videos are automatically re-named when tone was collected in the folder "vr" to simple names like "Vi2.mp4".

  Once I downloaded the project on our server any of the videos worked more. You can see what is happening here (hit launch unit, there is a video on slide 1):
  

  Strengthening of the highlights: learning that supports all students

  All you get is this delicious pre-loader Fail:

  

  Now, I thought: hey I can just go back to my project folder and type in absolute links for these vids because they are implemented on the server that is to say: http://UFV.ca/strength-demo/Unit1/VR/Vi2.MP4 ... bon ?

  I can't use the video format progressive download.

  I tried to use 'Adobe media streaming service' as it was the only one who allowed me to specify a http:// link but it wasn't a go.

  'Streaming vidéo' was a no-go.

  So I related to the renowned video in the published folder, and alas, once I re - download the project it still does not work. Hmmm, ideas?

  Thank you!

  Did you check if your server is actually put in place to allow video files of this type?  Sometimes, the problem is that your server administrator must specifically allow the file MIME type.  He could have a few changes in the server environment that have disabled now which previously worked for you.

  First crazy should check if the MP4 videos are directly accessible on the server to prove whether or not the problem is with the server settings.  If the MP4 videos can normally be served, but they are just not work for you, try to download the same zip on SCORM cloud LMS SCORM output to see if they work from there.  If they do, go back to your LMS provider and tell them that the issue seems to be with the LMS. If SCORM cloud has no problem with the content, why their LMS?

• Toner Collection Unit - Laser Jet 500

  Hello

  I have a printer HP Laser Jet 500 and it asks me to replace the toner collection unit.

  What type of toner collection unit is compatible with my printer?

  @iconsiglieri

  Toner collection unit is a replaceable piece by customer. Here is a document that shows how to replace the unit but also gives you a picture of what it looks like. Do a google search > m551 and you toner collection unit will be able to find the right part. Refer to the below document replace the unit.

  Replace Toner Collection Unit

• Why data acquisition in an executable collect fewer samples?

  Hello

  I have LV2012 on Windows and SMU-6341 map in PXI chassis.

  I have a task for the acquisition of data on I-1 on my monstrous application. Well, to get to the point, I have here a case where the task of data acquisition starts, waiting 20ms, reads all available samples and puts an end to the task. For the parameters see the piece attached. Then, the collected data is plotted on a waveform graph. Usually about 200 samples are taken in the case of data acquisition. Then loops shown sequence, until certain conditions are met.

  Unfortunately a problem occurs when I deploy a rack application (exe) on a production PC some 600 miles away from me.

  This is an example of what I get on my development PC (LV and runtime give similar results):

  

  This is an example of what I get on the production of exe PC (13 iterations, bad luck ):

  

  It totally looks like the data acquisition task mentioned seizes one sample to an iteration of the loop.

  I enclose a noodle dragged out of the main program. I'm about to test the version of this noodle on the production of PC in a few hours, but I would like to hear all the ideas that emerge.

  Thanks in advance!

  cubz wrote: from my experience, the continuous 'Samples' mode does not stop when the buffer is full. The loop of 4 seconds (with 10 k samples/s in the sample buffer 40 k)-that is to say samples how finished works IMO.

  If the buffer is filled in continuous mode of the samples, you will get an error.  I'm sure it's something you don't want.  In this example, you have provided, you really should have finished samples and has said the acquisition of data to read samples of N.  It is the only way to ensure you get all the data you want.

  In regards to your differences between development and executable, the executable file tends to only not nearly as happening (Debug stuff for the most part), so it tends to run faster.  If you're depending on a software clock, anything can happen (having a ton of little or no data).  That is why we say you use the clock machine and get the number of samples that you actually want.

• Zoo Tycoon 2; Zookeeper collection does not work on my Windows vista Home Premium 32 bit?

  I just gotton this game and it will not install on my laptop!  The RAM is 3.00 GB.  I just deleted a ton of things so it has avaibible of memory. Each time, it starts to install for a few minutes and then tells me it can not read.  I searched a lot of things online but may not know how!  So, if you have an idea of what I can do please let me know! And also, does anyone know if zoo tycoon complete collection works? Ok thank you.

  Hello

  
  1. What is the full error message you get when you try to install Zoo Tycoon 2: Zookeeper collection?
  2 are you able to install any other games or applications?
  You can read the following article and check if it helps.
  Microsoft games: InstallShield Error Messages
  http://support.Microsoft.com/kb/910816
  See also:
  Articles on Zoo Tycoon 2
  http://support.Microsoft.com/zootycoon2faq
  Zoo Tycoon 2 does not start or you receive an error message: "another instance of startup.exe is already running.
  http://support.Microsoft.com/kb/968309
  For reference:
  Zoo Tycoon 2: minimum system requirements
  http://support.Microsoft.com/kb/889368

• Collect project without changing the file structure?

  Hi all, anyone know if there is a way to collect a project without overlapping of images in a folder (film)? I organize my pictures in a folder with the files to the appropriate subcategory, I work, but like to use collect in order to reduce my folder of images at the end, as often, I have tons of items to choose from that I, or items left behind by the previous revised project, in the end, States I always end up with a folder of images in a folder of images. (I know that I have worked with all my images to the same level as my project, but what a waste.) I don't work that way.)  How other to face this? Looks like there must be a simple way that I'm not aware of. Thank you for your comments!

  If you just want to clean up your ASP project so that only the images used in the project remains in the project Panel, then simply use the Reduce function. The collect function has no option to recreate the same folder structure you have in the AE project Panel.

  If you want to manage the content of your files by removing the assets then you must use the collect function and then find a way to reorganize the structure of your file on your hard drives. I only use the collect function when I say someone to work on a project that has been approved. If they have access to the original images I'll let worry about duplicates on their own system.

  For all of my clients, all assets (videos, photos, pictures, scripts, notes, project management, billing - everything to do with this customer) go into specific folders and the original documents and the revised documents are never deleted. I have a carefully designed project of numbering and system files I used for many years going back to my days of working with film. Basically I have folders arranged like this by job under each customer number so I can watch my logs of project or an invoice or an e-mail with the project included number and go directly to resources for this job years later.

  • Docs
    • Invoices
    • Scripts
    • Production notes
    • Search
  • Video
    • The original film Date data / scenes
    • Intermediaries / scenes
    • Rendering of effects / scenes
    • 3D rendering / scenes
  • Audio
    • Production date / scenes
    • Scratch titles
    • Audio processing / scenes
  • Project files
    • After Effects / scenes
    • First / scenes
    • Illustrations
      • Air currents
      • Approved

  You get the idea. Personally and I learned this the hard way, I have never intentionally remove any work product or communication that I used to create any work for any client, I just organize files in a way that puts all the work approved in the approved appropriate folder and that the customer has access to the work approved.

• Multidimensional collection

  Hi all

  ORCL Version:

  Oracle Database 11 g Enterprise Edition Release 11.2.0.3.0 - 64 bit Production

  PL/SQL Release 11.2.0.3.0 - Production

  CORE Production 11.2.0.3.0

  AMT for Linux: Version 11.2.0.3.0 - Production

  NLSRTL Version 11.2.0.3.0 - Production

  I created a collection of size 2 and trying to fill the data in it.

  Object types and structure:

  DROP TYPE v_typ_obj1;

  CREATE or REPLACE TYPE AS OBJECT v_typ_obj1 (number of c1, c2 number, public STATIC FUNCTION getobject RETURN v_typ_obj1);

  CREATE OR REPLACE

  BODY TYPE v_typ_obj1

  AS

  Public STATIC FUNCTION getobject RETURN v_typ_obj1

  IS

  new_obj v_typ_obj1;

  BEGIN

  new_obj: = v_typ_obj1 (null, null);

  RETURN new_obj;

  END;

  END;

  /

  DROP TYPE v_typ_tab1;

  CREATE or REPLACE TYPE v_typ_tab1 IS TABLE OF THE v_typ_obj1;

  DROP TYPE v_typ_obj2;

  CREATE or REPLACE TYPE v_typ_obj2 AS OBJECT (col1, col2 v_typ_tab1, STATIC FUNCTION getobject RETURN v_typ_obj2 number);

  CREATE OR REPLACE

  BODY TYPE v_typ_obj2

  AS

  Public STATIC FUNCTION getobject RETURN v_typ_obj2

  IS

  new_obj v_typ_obj2;

  BEGIN

  new_obj: = v_typ_obj2 (null, null);

  RETURN new_obj;

  END;

  END;

  DROP TYPE v_typ_tbl2;

  CREATE or REPLACE TYPE v_typ_tbl2 IS TABLE OF THE v_typ_obj2;

  /

  DECLARE

  v_tbl v_typ_tbl2: = v_typ_tbl2();

  CNT1 NUMBER: = 1;

  CNT2 NUMBER: = 1;

  BEGIN

  I'm in 1.3

  LOOP

  CNT2: = 1;

  FOR j IN 1.4

  LOOP

  v_tbl.extend ();

  v_tbl (i) .col1: = cnt1;

  v_tbl (i) .col2 (j) .c1: = cnt2;

  CNT2: = cnt2 + 1;

  END LOOP;

  CNT1: = cnt1 + 1;

  END LOOP;

  END;

  When I run the anonymous block I get the following error,

  ORA-06530: Reference to the composite uninitialized

  ORA-06512: at line 12 level.

  Please help/guide me to fix this.

  THX

  Shan.

  Tons of errors. In any case:

  DECLARE

  v_tbl v_typ_tbl2: = v_typ_tbl2();

  CNT1 NUMBER: = 1;

  CNT2 NUMBER: = 1;

  BEGIN

  I'm in 1.3

  LOOP

  CNT2: = 1;

  v_tbl.extend ();

  v_tbl (i): = v_typ_obj2 (cnt1, v_typ_tab1 ());

  FOR j IN 1.4

  LOOP

  v_tbl (i).col2.extend;

  v_tbl (i) (j) .col2: = v_typ_obj1 (cnt2, null);

  CNT2: = cnt2 + 1;

  END LOOP;

  CNT1: = cnt1 + 1;

  END LOOP;

  END;

  /

  PL/SQL procedure successfully completed.

  SQL >

  SY.

• Delete the files under C:\Users\MyAccount\CS6 Master Collection\Adobe CS6

  After installation, I was left with a ton of files under C:\Users\Nathan\CS6 Master Collection\Adobe CS6 - 8.3 GB.

  These files are really needed? They seem to be mostly from the installation files. I can remove them right after the installation?

  Hi Nathan,

  The default location for the installation of the software is the folder program files and the default location for the extracted files is the desktop where the installation is launched. You could have chosen the folder above for extraction.

  If you have already installed the software, you can go ahead and delete this folder.

• tone curve correction

  where is this patch for the tone curves? I guess for 4.1rc with effect retroactive did not solve this

  He does.  When you start for the first time, you should see him.  If she finds something to do, he will do and put the pictures, he did it in in some special collections in a collection set, aptly named.

• Flex not including ArrayCollection collection passed to PHP

  First of all, I use Flex Builder 3, Wamp with 5.2.9 - 2 PHP and MySQL 5.1.33.  I also use the Zend Framework to retrieve data from MySQL.

  I have Flex using an HTTPService to send a request; the server is running then some PHP that reads a database MySQL, written each row in a table, all rows in a table.  Although I changed the actual data, here's what my returns a call on my MySQL database:

  SELECT  *
FROM  `table1`
LIMIT 0 , 30

  1 video filename.flv

  otherDescription 2 filename2.flv

  thirdDescription 3 filename3.flv

  The names of the columns are 'id', 'title', and 'source', respectively.

  Arrays in php seem to work very well, because in PHP,

  Print($result[1]['title']);

  We will give "otherDescription", and we can see that easily in Flex.

  The problem is I don't want "otherDescription; I want the whole table passed to Flex as a collection of table.

  I am able to pass the array from php, and then it's just a 'table' that I can't do anything with.  No matter what I trace him, he always says "Array", or it just doesn't work... Why is this?  Why can't I get anything out of it?  The thing is useful I can switch from PHP to Flex is a string, and it's awkward for what I do.

  Here is my PHP code:

  <? PHP

  require('Zend/DB/adapter/PDO/MySQL.php');

  $arr = array ('host' = > '127.0.0.1', 'username' = > 'root', 'password' = > ", 'database_name' = > 'videolist');

  $db = new Zend_Db_Adapter_Pdo_Mysql ($arr);

  $db-> getConnection();

  $sql = ' SELECT * FROM 'table1' LIMIT 0, 30';

  $result = $db-> fetchAll ($sql, 2);

  $resultArray = array();

  {foreach ($result as $resultItem)

  {foreach ($resultItem as $itemFragment)}

  [] $resultArrayFragment = $resultItem;

  }

  $resultArray [] = $resultArrayFragment;

  }

  echo $result;  or else, to illustrate how the collection of table, we can put "$result [1] ["title"]; ', in which case, Flex will show «otherDescription»

  to the traces below

  ? >

  Here are my relevant ActionScript:

  private function onResult (): void {//this is drawn, we get a result after calling the HTTPService send()

  var result = userRequest.lastResult;

  trace ("trace 1 =" + String (userRequest.lastResult));     product: 'table '.

  trace ("trace 2 =" + result [1] ["title"]);                           product: 'table '.

  trace ("trace 3 =" + result [1] ["title"] [0] [0] [0] [0]);            Product ALWAYS just: 'table '.

  var someDataProvider:ArrayCollection = new ArrayCollection (userRequest.lastResult.valueOf ());

  trace ("trace 4 =" + result [0]);                                     product: "RangeError: Index '1' specified is out of range...". »

  .

  .

  .

  }

  XML is fine for small amounts of data, you can use the object of the authority which is fast and lightweight. In my opinion, by far the simplest is Jason.

  PHP can encode and decode Jason, you can load a library in flex jason and decode and coded.

  Works perfectly, is now my main way to communicate with PHP.

  Google flex and jason there are tons of projects there.

• Garbage Collection, external swf and XML

  I did tons of research on the AS3 garbage collection. I have a decent knowledge of it, but I CAN'T find any info about the deletion of xml data. The worst thing is, I have no control over the version of the file (AS2 or AS3) swf file I'm loading. Unfortunately, I'm loading AS2 swf (with an outside provider that will not show you any code) in a film of AS3. When I run garbage collection, the data from the xml file / is not deleted and I can't understand how get rid of it. The problem is, once a file is loaded which calls an xml file, no other files cannot load an xml.
  
  If anyone knows how to clear the XML, please fill me in.
  
  Thank you!
  
  Heather
  
  The code is:

  **************UPDATE*************************************

  Hey people,

  Good news. I just read an announcement of Grant Skinner regarding what my problems were.

  For more details, go to his blog @ http://www.gskinner.com/blog/archives/2008/07/unloadandstop_i.html

  Be sure to read the update as well.

  See you soon,.

  Heather

• Order of items in a collection

  Hello!

  Make changes to the order elements within a synchronization of collection between a mac and ipad iBooks?

  I'm arranging my books (ePub from the ibooks store) in the collections and the order in which I choose in ibooks (mac) does not synchronize with that of ibooks on the ipad.

  In addition, anyone knows who is the 'key' to include in the itunesmetadata.plist that itunes create inside your ebook when you add it to your library that manages collections? (I mean: what to include in this file to make the ibooks to know this book is part of a collection, and where the order on that?)

  Hey alexeiei,

  I think it can be arranged by your style "sort by", that it either by most recent, title, or manually. That being said, it must the synchronization between your devices. In addition, make sure that you are allowing your devices to share the book metadata information.

  On your Mac

  • Open the iBooks app.
  • Select iBooks > Preferences > General.
  • Select "Sync bookmarks, facts highlights and collections across devices.
    This setting is enabled by default.

  On your iPhone, iPad or iPod touch

  • Go to settings > iBooks.
  • Select the Collections of synchronization and synchronization of bookmarks and Notes.
    In iBooks 3.2 or earlier, select Synchronize Collections and synchronization of bookmarks.

  If you don't see all your information on all your devices, check your settings:

  • Make sure that you have turned on sync above settings on all of your devices.
  • Make sure you use the same Apple ID in the store, iBooks on all your devices.

  See the link, here, Apple's Support pages.

• iPhone 7 tones don't synchronize from a backup of the iPhone 6

  I've just updated to iphone 7 + a 6. I got ringtones on my iPhone for the years I've done previously. But now I can't have them on the new 7 +. I made a backup of the 6, but they did not transfer. When I plug the 6 I see them in "ringtones" in iTunes, but I can't bring it to drag-and - drop or move anywhere in a library in iTunes to put them on the 7 +. I'm really frustrated! Someone knows how to fix?

  Steffal wrote:

  I've just updated to iphone 7 + a 6. I got ringtones on my iPhone for the years I've done previously. But now I can't have them on the new 7 +. I made a backup of the 6, but they did not transfer. When I plug the 6 I see them in "ringtones" in iTunes, but I can't bring it to drag-and - drop or move anywhere in a library in iTunes to put them on the 7 +. I'm really frustrated! Someone knows how to fix?

  your tone should already by in your ITunes library...  I guess that are customized to you have created... you should be able to synchronize them via iTunes on your new phone.

• change of tone of WhatsApp after update to ios 10

  Hi all

  All have you any idea how to use back the previous your whatsapp after update to IOS 10? I m using your glass for the whatsapp but any change in three tones.

  Thanks for the info if you...

  Hi there, Sching! Thank you for using communities of Apple Support.

  I have different sounds for different reasons. So I can understand how I would look back to how I liked it. I'll be happy to help you with this.

  How can I change my ringtone for WhatsApp? -WhatsApp foresaw this situation and provided the information you need.

  Take care!