TopLink Grid: Create EntityManager fails when running on WebLogic

Similar Questions

• Grid Infra configuration failed when running root.sh on the second node

  Hello world.

  I am new guy on RAC environment. When you try to install Oracle RAC on the local environment, I had this problem:

  -J' have run root.sh successfully on a local first node

  -After that, the first node, there are 3 cards of virtual network created to SCAN listening addresses

  -After the success of action on the first node, I tried to run this script on the second node, but the error occurred:

  CRS-2676: Start of 'ora.DATA.dg' on 'dbnode2' succeeded
  PRCR-1079 : Failed to start resource ora.scan1.vip
  CRS-5017: The resource action "ora.scan1.vip start" encountered the following error:
  CRS-5005: IP Address: 192.168.50.124 is already in use in the network
  . For details refer to "(:CLSN00107:)" in "/u01/app/11.2.0/grid/log/dbnode2/agent/crsd/orarootagent_root/orarootagent_root.log".
  
  CRS-2674: Start of 'ora.scan1.vip' on 'dbnode2' failed
  CRS-2632: There are no more servers to try to place resource 'ora.scan1.vip' on that would satisfy its placement policy
  PRCR-1079 : Failed to start resource ora.scan2.vip
  CRS-5017: The resource action "ora.scan2.vip start" encountered the following error:
  CRS-5005: IP Address: 192.168.50.122 is already in use in the network
  . For details refer to "(:CLSN00107:)" in "/u01/app/11.2.0/grid/log/dbnode2/agent/crsd/orarootagent_root/orarootagent_root.log".
  
  CRS-2674: Start of 'ora.scan2.vip' on 'dbnode2' failed
  CRS-2632: There are no more servers to try to place resource 'ora.scan2.vip' on that would satisfy its placement policy
  PRCR-1079 : Failed to start resource ora.scan3.vip
  CRS-5017: The resource action "ora.scan3.vip start" encountered the following error:
  CRS-5005: IP Address: 192.168.50.123 is already in use in the network
  . For details refer to "(:CLSN00107:)" in "/u01/app/11.2.0/grid/log/dbnode2/agent/crsd/orarootagent_root/orarootagent_root.log".
  
  CRS-2674: Start of 'ora.scan3.vip' on 'dbnode2' failed
  CRS-2632: There are no more servers to try to place resource 'ora.scan3.vip' on that would satisfy its placement policy
  
  start scan ... failed
  FirstNode configuration failed at /u01/app/11.2.0/grid/crs/install/crsconfig_lib.pm line 9379.
  /u01/app/11.2.0/grid/perl/bin/perl -I/u01/app/11.2.0/grid/perl/lib -I/u01/app/11.2.0/grid/crs/install /u01/app/11.2.0/grid/crs/install/rootcrs.pl execution failed
  
  

  I tried again with several times (with left-hand) but the problem was still there. Can you explain to me?

  -Why, after running root.sh on the first node, all IP SCANNER interfaces was created on this node? This is the reason why root.sh fails on the second node.

  -How to solve?

  I use the server for address scan local DNS resolves to 3 IPs, and I can run script runcluvfy.sh with success on both nodes.

  I thank in advance

  PS:

  I use two virtual machines in vmware. After running root.sh on the first node, I checked and found this funny information:

  [oracle@dbnode1 sshsetup] $ / sbin/ifconfig

  eth0 Link encap HWaddr 00: 0C: 29:BC:43:1 B

  INET addr:192.168.50.66 Bcast:192.168.50.255 mask: 255.255.255.0

  ADR inet6: fe80::20c:29ff:febc:431 b / 64 Scope: link

  RUNNING BROADCAST MULTICAST MTU:1500 metric: 1

  Dropped packets: 249814 RX errors: 0:0 overruns: 0 frame: 0

  Dropped packets: 2956882 TX errors: 0:0 overruns: 0 carrier: 0

  collisions: 0 txqueuelen:1000

  RX bytes: 24913472 (23.7 MiB) TX bytes: 4369984705 (4.0 GiB)

  eth0: 1 link encap HWaddr 00: 0C: 29:BC:43:1 B

  INET addr:192.168.50.120 Bcast:192.168.50.255 mask: 255.255.255.0

  RUNNING BROADCAST MULTICAST MTU:1500 metric: 1

  eth0:2 Link encap HWaddr 00: 0C: 29:BC:43:1 B

  INET addr:192.168.50.122 Bcast:192.168.50.255 mask: 255.255.255.0

  RUNNING BROADCAST MULTICAST MTU:1500 metric: 1

  eth0:3 Link encap HWaddr 00: 0C: 29:BC:43:1 B

  INET addr:192.168.50.123 Bcast:192.168.50.255 mask: 255.255.255.0

  RUNNING BROADCAST MULTICAST MTU:1500 metric: 1

  eth0:4 Link encap HWaddr 00: 0C: 29:BC:43:1 B

  INET addr:192.168.50.124 Bcast:192.168.50.255 mask: 255.255.255.0

  RUNNING BROADCAST MULTICAST MTU:1500 metric: 1

  eth1 Link encap HWaddr 00: 0C: 29:BC:43:25

  INET addr:192.168.29.10 Bcast:192.168.29.255 mask: 255.255.255.0

  ADR inet6: fe80::20c:29ff:febc:4325 / 64 Scope: link

  RUNNING BROADCAST MULTICAST MTU:1500 metric: 1

  Fall of RX packets: 471 errors: 0:0 overruns: 0 frame: 0

  Dropped packets: 664 TX errors: 0:0 overruns: 0 carrier: 0

  collisions: 0 txqueuelen:1000

  RX bytes: 82216 (80.2 KiB) TX bytes: 107920 (105.3 KiB)

  eth1:1 Link encap HWaddr 00: 0C: 29:BC:43:25

  INET addr:169.254.75.201 Bcast:169.254.255.255 mask: 255.255.0.0

  RUNNING BROADCAST MULTICAST MTU:1500 metric: 1

  Lo encap:Local Loopback link

  INET addr:127.0.0.1 mask: 255.0.0.0

  ADR inet6:: 1/128 Scope: host

  RACE of LOOPING 16436 Metric: 1

  Fall of RX packets: 10626 errors: 0:0 overruns: 0 frame: 0

  Dropped packets: 10626 TX errors: 0:0 overruns: 0 carrier: 0

  collisions: 0 txqueuelen:0

  RX bytes: 7942626 (7.5 MiB) TX bytes: 7942626 (7.5 MiB)

  I think it's because of the failure on node 2

  UPDATE:

  That thing is normal, I ignored it and the installation can continue normally. Thank you all for your help.

• Creating a checkbox when running?

  So I'll make a list of items from a database, each with a checkbox. Of course, I don't know how many elements there will be, so I have to create the boxes when running. I'm having a hard time getting anything to appear. Can someone tell what I do wrong?
  
  Thanks for any help!

  Test method for the component createClassObject(). You must
  to create a new instance of the component, not new().

• Photoshop CC 2014 crash when you open or create new files when running with Cintiq 13HD.

  I have a problem where Photoshop CC 2014 crashes when you try to open or to create a new file while the Photoshop window is displayed on my Cintiq 13HD.
  When Photoshop is displayed on my main screen, it does not crash.

  I am running Windows 7 (64-bit) and have updated my graphics and wacom drivers in their latest versions and Photoshop is completely up to date. (I'm under the 30 day free trial)

  
  Here is the log of the events of the accident:

  The failing application name: Photoshop.exe, version: 15.2.1.257, time stamp: 0x543dbc5e

  The failed module name: atig6txx.dll, version: 8.14.1.6398, time stamp: 0 x 54176130

  Exception code: 0xc0000005

  Offset: 0x00000000000122b7

  ID of the process failed: 0x23dc

  Start time of application vulnerabilities: 0x01d0030b1092334e

  The failing application path: D:\Program Files (x 86) \Adobe\Adobe Photoshop CC 2014\Photoshop.exe

  Path of the failing module: C:\Windows\system32\atig6txx.dll

  Report ID: 61680f48-6efe-11e4-aeeb-bc5ff45851ea

  Next, you need to communicate with AMD/ATI to see why his latest driver is crashing on your system and not on the other user's systems.

• Flash Player v9 installation MSI fails when running as & quot; Local System & quot;

  Hello
  
  I will distribute Adobe Flash Player 9 by SMS. I use the own Adobe msi package: "install_flash_player_active_x.msi." All browsers are IE6 (Internet Explorer v6). All systems are running Windows XP SP2 + all updates.
  
  I'm well aware of the number of ISScript 10.50 with DCom RUNAS keys.
  
  The MSI package works very well as long as it is performed by a user with administrator (running in the user environment) rights.
  
  But as it is installed by SMS (running as "Local System"), it fails.
  I tried to run it as 'Local System' with the User Interface. I get the following error message:
  
  The wizard was interrupted before that Adobe Flash Player 9 ActiveX could be completely installed.
  Your system has not changed. To complete installation at another time, please run the installation again.
  Click Finish to exit the wizard.
  

  I dropped the original Adobe MSI package. Made a new and working, using the FlashPlayer Merge Module.

• Error when run embedded weblogic

  Hello

  I have JDeveloper 12 c, when I run application this error pops up

  oracle.security.opss.tools.lifecycle.LifecycleException: JPS-01047: cannot persist the wallet. Reason for java.io.IOException: ICP-02010: invalid MAC for the portfolio. Portfolio audit has no...

  Try to rename the file cwallet.sso (for example rename cwallet.sso_bkp) you can find it in (\config\fmwconfig)

  because of use you embedded Weblogic, you will find the path of the field like this:

  C:\Users\\AppData\Roaming\JDeveloper\system12.1.3.0.41.140521.1008\DefaultDomain\config\fmwconfig

  After you rename the file as run Weblogic once again the new cwallet.sso file should automatically created

  refer to this link:

  The main idea of the blog is to share solutions to the problems that I had before: Weblogic Admin Server issues

• Create new Pixelbender filters when running

  Anyone know if it is possible to create PixelBender filters when running?
  I want to be able to load any kernel of .pbj during execution to create a new filter.
  I think that the problem is with the embed tag. There is no way that I know how to dynamically generate the path of the CBC to the embed tag, it must be hard-coded.
  

  The following example is from the documentation from Adobe on the Shader. You can easily switch the PBJ you wanted to load it into the application. Once loaded, you can then apply or use it as an instance that has been incorporated.

  http://help.Adobe.com/en_US/ActionScript/3.0_ProgrammingAS3/WSB5D89F6A-065F-4b18-A163-D421 90DB7ABE.html

  var loader: URLLoader = new URLLoader();
  loader.dataFormat = URLLoaderDataFormat.BINARY;
  loader.addEventListener (Event.COMPLETE, onLoadComplete);
  Loader.Load (new URLRequest ("myShader.pbj"));

  var shader: Shader;

  function onLoadComplete(event:Event):void {}
  Create a new shader and set the data loaded as its bytecode
  Shader = new Shader();
  shader.byteCode = loader.data;

  You can also pass the bytecode to the Shader() constructor like this:
  Shader = new Shader (loader.data);

  do something with the shader
  }

• What page template will change when change of page template when running?

  Hi all
  
  When we create a portal that have not only a model for example my portal has 4 pages, each page use different page template.
  Which pages will be changed in the new template when we use the model of change running page?
  How to frame these page should change?
  
  Thank you.

  I understand.
  It all depends on how you have selected the model. If you selected explicitly model A, B, C or D for your pages and you change the default template, none of the pages will be updated.

  If your current default template is set to A and you create a page when running, you can choose from all models, but you can also select default Application. If you select this, your page will get you the model that has been set by default in the config tab.
  When you update the default template in the config tab, only the pages that have the model request by default assigned will be updated which means that as soon as you select a template to explicitly, the default template is not serious and he will not change your page.

  Is this clear?

  Just try, put your default template on A and create two pages:
  Page to where you select default APplication as model
  Page B, you select A model as
  Do not change the model by default in the config to B tab and look at page A and B. You will notice that A page will be updated and uses the B model while page B will always use the model A.

• How to create a reference in the schema when running?

  Hello

  I make a program and I would like to create references to objects at run time, y at - it a function in labview that lets do?

  Thanks in advance!

  It of maybe just me, but what do you mean by "cluster objects"?

  What is a cluster as terminal? If this is the case, then just to let you know, that a cluster cannot change the size/number when running, you need a table for this.

  Where are you what to change the visibility for?

  If it's a 'high-level' orders/lights vi you what to change the visibility on a Subvi, then you must provide the sub - vi with an array of references to the controls/indicators.

• Profiles of DRM fails when creating EPMA Interface

  Hello

  DRM getting authentication failed when creating profiles of EPMA.

  I tried several times but his failure to get. do I need to do something in DRM. Please some guide.

  Hello

  Please follow him below the steps and, hopefully, this should solve your problem

  1. connect to the DRM application server.

  2. launch the DRM configuration console

  3. click on the Application to change

  4. on the register EPM tab, click the button cancel the registration.

  5. in the identification information section change of user name and password for the correct credentials (as a general rule, the user is epm_admin)

  6. click on the button Save

  7. Enter the credentials of the user CSS (as a general rule, the user is epm_admin)

  8. click on Save Configuration

  9 restart DRM Services

  10. try to create an import profile in EPMA

  Thank you

  ~ KKT ~.

• How to change text labels that created when running?

  Hello

  I am creating label dynamic runtime controls and adding them to a group element. This component of the group is in another custom component and I have a lot of comp. custom in my application.

  My question is how to access (via id) and change a text whict labels created when running?

  I can change it, but I am the creation of the id and that you want to reach via id.

  var lbl:mx.controls.Label = mx.controls.Label (subMenu5.group_subMenu5.getElementAt (1));

  LBL. Text = "good job."

  Thanks, have a nice day.

  First of all, if you already use a group of Spark, I would say that you use a label of the spark instead of a label of MX. If you want to refer to the label of the group, to loop through the elements of the Group and check if the id of the item corresponds to the label that you want to assign text.

  var lbl:Label;

  var n: int = myGroup.numElements;

  for (var i: int = 0; i< n;="">

  {

  LBL = myGroup.getElementAt (i) as Label;

  If (lbl & lbl.id == "myLabel")

  {

  LBL. Text = "newText";

  }

  }

• mxmlc - fails immediately when run at the command prompt

  Yes, I'm under flex 2 with java 1.6.
  I am able to write and run applications using the Flex Builder 2 IDE without problem.
  Wanted to compile the style sheet to use when running.
  He worked through the setting without problem.
  
  When I run mxmlc from the command prompt, Windows prompts with 'JAR Launcher has encountered a problem and needs to close. We are sorry for the inconvenience. »
  
  I launched the debugger VS, where I was able to get the violation, an unhandled 0x5c62696c in mxmlc.exe exception: 0xC0000005: reading location 0x5c62696c access violation.
  
  No idea or help is appreciated.

  My user error. Just removed all the following settings. It was a config problem.

• Ripple Build: [ERROR] Failed to run launching java.exe.

  Hello BB community

  I have a problem with the Chrome Ripple 0.9.8 extension I could not find such an error in google.

  When I click on the build, it shows error:

  Oh, Snap! Build request failed with the message: [ERROR] failed to run java.exe launch.

  and create the file .zip in the output folder

  I have Java 6, 7 and 7 installed SDK

  The problem was that I moved manually SDK Webworks directory to another location.
  the solution is to change the path to the bbwp.properties file in:
  C:\...\BlackBerry SDK software WebWorks for Tablet 2.2.0.5\bbwp\bin

• Create process failed code 740 requested operation requires an elevation

  After installing the trial version Everest (material ID software), I get this message "create prosess failed code 740 requested operation requires a rise." This was followed by a crash after x'ing out.  Funny things are gone. Mouse came out the other day (possibly not related), yesterday lost keyboard driver. Then downloaded regcure and all the he'll is unleashed. I have Mcafee dumped (which was), installed and run AVG and one - quared and found nothing. I also run Microsoft malicious software last week and found nothing. last night when I was trying to get rid of regcure - which I downloaded from the site of microsoft in connection, it would pile up a hundred windows on my screen and then told me that he was no longer at the location. I don't know where he is. . I know it's a lot of things, but just try to ask for one. I'm afraid that I'm digging deeper.

  The Everest product is certified for Windows 7? I note on their web page to claim "BOLD", it adapts to all versions of Windows, I tend to doubt since Windows 7 places many restrictions on software, especially when it comes to probe the material. I would like to use the system restore to return Windows to a point before the installation of Everest.
  _________________________
  ID #0211. If this answer was helpful, you can vote by clicking on the green triangle. If it solves the problem, click 'propose as answer. Thank you.

• TimesTen - 7001: user authentication failed when using XLA

  I installed TimesTen 11.2.1.8.0 on AIX 5.3 System.* user 'oracle '. I created another user of the application 'risk' to use in my application with TimesTen.

  When running my application with the user 'risk' to connect with TimesTen it is OK. But when I want to use the XLA feature, when I call the createDurableSubscriber function, it returns the error

  javax.jms.JMSException: failure of SQLDriverConnect (XlaCommon.c, line 48): S1000 7001 [TimesTen] [driver ODBC of TimesTen 11.2.1.8.0] TT7001 [TimesTen]: user authentication failed - file "db.c", lineno 9722, procedure 'sbDbConnect '.

  It is strange that if I switch to user 'oracle', it works fine.

  Can someone please help understand the reason why.

  Thank you

  You created the user 'at risk' within your TimesTen database?

  CREATE a USER risk IDENTIFIED BY 'some password'?

  You granted the privilege of the user risk to use XLA?

  XLA GRANT at risk;

  Have you used this user name and password in the JDBC URL when connecting to the database application JMS/XLA?

  The 'oracle' user is probably your admin user of the instance (which is the database root) and therefore can use all the features without special action (but of course you never run application as that user).

  Chris