R210 with PERC H200 will increase the possibilities for HD

Similar Questions

• BSOD drives when adding T110 ii with PERC H200 and SBS 2011 or Server 2008 R2-

  Bought the server next in November 2011

  PowerEdge T110 II

  ManufDate: 24/10/2011 market: 06/11/2011
  RAM: 16 GB (4 x 4) 1333 mhz UDIMM DualRanked
  Processor: Xeon E3-1270 3.4 Ghz, 8 M cache, Turbo, Quad Core/8 t (80W)
  RAID: Map Perc H200
  Drive: 2 x 600GB 15K RPM SCSI 6Gbps 3 .5in - RAID 1 Mirror SA
  SBS 2011 standard x 64 (works on Win 2008R2)

  SBS 2011 installed without a problem and the server works perfectly since December 2011.  Backups occurring twice per day to a USB attached hard drive external 1.5 to and OS patches applied on a monthly basis without problem.

  Company need more storage so it wanted to add 2 drives more (same spec as to purchase). I thought to try to turn the RAID 1 pair in RAID 10 set in order to keep the simple logical configuration (a single large logical volume which now seems to be 1.2 TB in size instead of 600 GB) - could get but not really someone to describe if it could be done for non-destructive way that requires not the complete system installation/restoration - so opted for just add the 2 new drives as a RAID extra 1 pair in order to not reach a stable, boot, partition operating system running on the current RAID 1 pair.

  Contracted for the Dell technician to come out to install 2 new readers, be clear that the service was not complete until I had an extra pair of RAID 1, appearing as a usable operating system.

  Technician arrived, installed readers, set the new RAID pair in the H200 configuration utility, rebooted the system and when the BONES began to load had a blue screen BSOD. Technician then disconnected drives newly associated (the level of the cables) to see if the system would boot - BSOD again on restart (both of now get us this "pleated" feel if you know what I mean). Then went into the raid configuration utility, removed the new raid 1 volume (which, by the way, is appeared above the one existing in the list - which is not very intuitive that one that has been added is Volume 1 and the existing old is Volume 2 in the utility). After the triple-checking that we had the right volume (it showed that 8% initialized over the other which was complete, as well as the corresponding drive port numbers), we have REMOVED the new volume (at this point I don't remember if we had replaced the cables for the readers to perform this action).

  At startup the system rebooted normally - we were all so relieved, don't talk over retries at the moment.

  Talk to Dell there seems to be a problem with the PERC H200 firmware or drivers. Has not affected the config initial of a single pair of RAID 1, however caused problems when you attempt to add another pair. Escalation of Dell support said that has happened several times with Windows 2008 (which comes from the SBS 2011) systems. They recommended that the firmware update and the PERC H200 card drivers.

  I turned to the technician and asked when we could plan the updates of the firmware and driver and told him that they wouldn't do that (not sure that I blame the poor guy, he was sweating bullets after the BSOD 2nd).  I explained that we have contracted for installation services which included ensuring that the pair of extra disk appeared also usable for the operating system and he said that I needed to talk to Dell that.

  You wanted to post information on issues with PERC H200 BSOD when adding disks on Win2008 (or SBS 2011).

  Waiting for response from Dell as to who will come on-site to complete the installation.

  Any info about the question to know if the update of the firmware/driver will solve the problem or if I can do with reliability a disk 2 RAID 1 for a 4 disk RAID 10 conversion without having to reinstall/restore system would be appreciated.

  There is NO migration route TO or FROM a nested RAID levels (10, 50, 60) on one of the PERC H series, so it goes from 1 to 10 of RAID is not an option (without backup/replace/create/restore).

  Firmware release notes do not indicate that a large part is added (although the "bugs" may be enough):

  -Addition of Support for > 2.2 to SAS hard drives

  -Small bug fixes

  I have not seen/heard talk of this problem (I don't have a H200), but it is possible that an update of the firmware can change the way it handles the new disks, newly configured RAID arrays, or even how it presents to the OS.

  Do you know if the technician checked to see if the original VD was marked as boot VD?

• Change tracking (CTK) block is supported for this virtual machine, but was refused. This will increase the CPU proxy and consumption of IOP.

  I have problems with a client of VMware image-level in an EMC Avamar backup.  So far, we have not been able to find information about this message in the backup log file.  It is originally the backup to take a very long period of time (on average 10-11 hours).

  2014-02-28 14:20:57 avvcbimage < 14681 > Info: change tracking (CTK) block is supported for this virtual machine, but was refused. This will increase the CPU proxy and consumption of IOP.

  We cannot determine why CBT is "denied".  Has anyone here run across this issue before or seen any other type of backup VMware image have denied CBT?

  Everything I checked watch that CBT is successfully activated since the file vmx for the customer to the Avamar config.

  ESXi host is Enterprise Plus 4.1.0 260247

  After spending some time on this issue, the ultimate resolution withdrew the Avamar vm and then add it again.  After that, CBT began to work properly.  It seems that there is a parameter that has been 'stuck' pertaining to this virtual machine that wasn't behaving properly.

• If I activate 2 processors in msconfig, it will increase the performance of my computer... !

  If I activate 2 processors in msconfig > advanced > number of processors to 2 it will increase the performance of my computer... !

  Original title: two processors

  In most cases, you will probably have to use these options, but they can come in handy. For example, if you think that a startup problem is caused by the presence of more than one processor, you can limit the number of processors used to boot the system by activating the checkbox number of processors, and specifying a number.

  Mr President I'm on hp xw6400 workstation it has 2 processors and I use windows 10 on it, I want to run the two processors at the same time to improve performance is anyway you can tell me how...

  Hello

  Installation is possible, however, the operating system will use a processor at a single time. There are also the prerequisites if you want this kind of installation. Even if it is possible, we have no advice to use both processors at the same time, because performance will always be bottleneck depending on the hardware and the operating system you are using.

  Kind regards.

• When should update 2015 which will increase the size of the font on our screens? [was: font size]

  When should update 2015 which will increase the size of the font on our screens?

  This is an open forum, not Adobe support... so I doubt that anyone here knows... and Adobe discuss very rarely of the future products in the forums

• How o I increase the volume for headphones.

  Original title: how to increase the wav in windows 7

  I bought a headset and they were of low volume, but I tried on my dads windows xp there was the bar of wav and I increased it and it was fixed on xp but where can I find the wav bar in windows 7 windows 7 y at - it software to do?

  Hello

  This problem only occurs when using headphones?

  You can follow the suggestions and check out them.

  Method 1

  a. right click on the notification area, the volume icon.

  b. click Open Volume Mixer and increase the volume for the headphones.

   

  Method 2

  a. right click on the volume icon in the notification area.

  b. go to playback devices and click with the right button on helmet under playback.

  c. go to properties and set the volume to maximum on the levels tab.

  d. click on apply and OK.

• NVIDIA will update the driver for quadro 4000 for mac? When?

  NVIDIA will update the driver for quadro 4000 for mac? When?

  Not sure when / if they will make an update of the Quadro 4000 driver, but I've been running the current driver with no problems.

  Have you problems? If Yes, please explain.

  Here are links to the latest version of the driver:

  http://www.nvidia.com/object/MacOSX-CUDA-5.5.28-driver.html

  http://www.nvidia.com/download/driverResults.aspx/68439/en-us

  Thank you

  Peter Garaway

  Adobe

  Premiere Pro

• I have phone i6, when I connect the Wi - Fi, it was connected, but in case of auto-lock, when I open the auto lock or if I m not used 2 or 3 minutes more, he will ask the password for Wi - Fi.

  I have phone i6, when I connect the wi - fi, it was connected, but when the automatic locking has occurred or if I'm not used the phone minutes 2 or 3, after that I'll use the phone, once again, it will ask the password for wi - fi.

  What is an i6 iPhone? There are:

  iPhone 6

  iPhone 6 +.

  iPhone 6 s

  iPhone 6s +.

• EventID: 1206 Event Source: Active Directory Web Services ADWS failed to determine whether the computer is a global catalog server. What will be the solution for this.

  EventID: 1206 Event Source: Active Directory Web Services ADWS failed to determine whether the computer is a global catalog server. What will be the solution for this.

  Hi K jtm,.

  Your question of Windows is more complex than what is generally answered in the Microsoft Answers forums. It is better suited for the IT Pro TechNet public. Please post your question in the TechNet Forum. You can follow the link to your question:
  http://social.technet.Microsoft.com/forums/en/category/WindowsServer/

• When Adobe will approve the Acrolinx for InDesign CC 2015 plugin?

  When Adobe will approve the Acrolinx for InDesign CC 2015 plugin?

  [Movement of the general, all Adobe forums lounge to a specific forum - MOD]

  Published last week... that's what you're looking for?

  https://creative.Adobe.com/addons/products/16031#.V7TvM5MrKEI

• RAM 1 GB upgrade will increase the performance of the Satellite Pro M30?

  My ram size is currenty 512 MB.
  I have the model Satellite Pro M30.
  As the old model, my laptop would be faster if I increase to 1 GB

  Hello

  Of course, the 1 GB of RAM would help increase the performance of your laptop.
  It must be useful for faster loading applications.
  You will notice also that your tools and other software will be faster.

  To upgrade to the 1 GB RAM, you would need two 512 MB modules.
  Usually the PC2700 DDR - RAM 512 MB module must be compatible.

  Welcome them

• Star Wars h.e. 15-an000nl: optical drive Swap with a ssd will void the warranty?

  Hi all

  I am a proud new owner of this machine, and since it comes with a 1 TB hard drive 5400 RPM and I am also a happy owner of an SSD, I was wondering if the optical drive with the ssd Exchange void my warranty?

  I read a little the other q / a and I see that if I try to reach the drive, with all the screws and the cover plastic to raise, I'll probably end by unsecured (actually is not very clear if it's for sure or I'll use a ssd tested non hp...) and since then to remove the optical drive , I just remove a screw, buy an adapter and you're good to go...

  So my question is: what limits should I beyond the warranty for you? It's just the opening action itself, or there is more?

  And since I write here, optical drive sata port is a sata3 as (I hope) the hard disk it is? Would you recommend this operation?

  Thanks in advance for any assistance received...

  The optical drive is an authorized user of replacement so you can put an SSD in an optical caddy and will not void the warranty but I do not recommend: 1. the interface is slower; and 2. You cannot start it. Unfortunately, access to the internal hard drive space is verboten and may void the warranty. We can speculate and say if it's done well, nobody would know and likely HP won't guarantee, but we can get official word on this, so the smartest thing is to assume the worst. If you don't care the guarantee and want just your laptop to be quick, we are happy to help you with the understanding that you risk the warranty.

  If it's 'the Answer' please click on 'Accept as Solution' to help others find it.

• Torch: OpenVG will increase the speed in real time for the scaling\rotating image?

  Hello!

  I have such a problem. I need to view the satellite map (not vectored) with the possibility of scaling on in real time. Map is a bitmap either 1500 x 1500.

  I'm doing the scaling that requires 480 * 360 for operations return the second part of the map on a defined scale, but it is not enough - it is slow to make good zoom in real time.

  Maybe someone knows is it possible to increase the speed by using OpenVG? (OpenGL is not supported in the torch)

  Thank you for your attention.

  Realization of OpenVG for play ~ 1500px x 1500px images, rotation & them staggering realtime works pretty fast.

  So if someone needs of fast image processing to use OpenVG

• It is possible to combine hard disks to increase the space for the C: drive?

  My c drive is running out of space. However there enough space in the hard disk in the other readers. Is it possible to combine one or two partitions c and increase the space available in c without formatting. I'm using vista Home premium

  It is possible, if you format a partition you want to combine. If you have some data, you can move them to another place or external drive. Then I say you want to combine the D and C drive (you could do it with any other drive):

  1) go to start, then right click on computer and then click on manage

  (2) then find storage-> disk management

  (3) right click on the D drive, then click on remove

  (4) then right click on C, then click on expand

  Note that in this case, as I said information on drive D will be lost. So make sure you save them. It might be a question that if you install something on drive D, you will need to reinstall it.

  Drive D example right, you have picked any other player.

• My vision is getting worse. How can I increase the font for windows? I mean the part of windows that love he menu bars, you need to select the items? Help

  My vision is getting worse, with difficulties to read the policy on menus.  I changed the resolution and changed the font size that does not affect the police in the menus, how to change that.  When I go to display and look at my make it 9 Sergie I want to increase that to a greater number how do I do that?  I believe that it will solve my problem.

  Hi Janice,.

  I understand that you want to increase the font size.
  Check out the following link and select Larger - 150% on the settings window.

  Make the text on the screen larger or smaller

  http://Windows.Microsoft.com/en-in/Windows7/make-the-text-on-your-screen-larger-or-smaller

  If this does not help, see the section "to create a custom DPI scale" link above.

  If you have additional questions, or if this problem persists, come in and we will be happy to help you.