Toshiba E-Studio printer - want to manage user impression in HIGH-LEVEL

Similar Questions

• Toshiba e-Studio 206 - I want to install local printing to Cent OS 6.4

  I have Toshiba e Studio 206 and 207 and Cent OS 6.4.

  and I see in the building after command lsusb

  [root@m4-novnik ~] # lsusb
  Bus 001 Device 002: ID 8087:0024 Intel Corp. integrated rate matching hub
  Bus 002 Device 002: ID 8087:0024 Intel Corp. integrated rate matching hub
  Bus device 003 002: ID 08 6:8012
  Bus 001 Device 001: ID 1d6b:0002 Linux Foundation 2.0 root hub
  Bus 002 Device 001: ID 1d6b:0002 Linux Foundation 2.0 root hub
  Bus 003 Device 001: ID 1d6b:0002 Linux Foundation 2.0 root hub
  Bus 004 Device 001: ID 1d6b:0003 Linux Foundation 3.0 root hub
  Bus 001 Device 003: ID 0749:1000 never Electronics Corp.
  Bus 004 Device 002: ID 093a: 2510 optical mouse Pixart Imaging, Inc.

  CUPS, version 1.4.2

  connected USB 2.0. -Bus 003 Device 002: ID 08 6:8012
  I want to install local printing.

  Help, please.

  I'm quite skeptical and I do not think that someone on this forum will be able to help with this.
  In my opinion, you have more chances of getting help on Linux forums.

• Does not print without the rights of administrator - Toshiba e-studio 2

  Excuse for my English.

  A question: does not print without administrator rights.
  I do not know is that a problem?

  As it is possible to allow for the press with the rights of the user.

  Toshiba e-studio 206

  Hello

  You intervene on the Toshiba printer

  According to your message, the printer does not and doesn't print because the user does not have authorization right.

  You can change try to assign the admin right to the user account.
  You can also try to assign only a right to the user account.
  In this case go to-> printer & faxes Control Panel
  Choose the printer-> right click-> properties-> tab security

  There you can assign printer preferences

  Welcome them

• Toshiba e-Studio 3040c continues printing from other sources

  Hello together

  In our society, we have a Toshiba E-Studio 3040c next to other printers.

  It prints and basically works well, but we have the issue that if a source document is empty, it continues printing from other sources, even if there is another paper out there.

  The only point in the Web interface with: "Change the paper source automatically" is set to NO then it theoretically it should continue printing.

  Any suggestions I can try next?

  Thank you for your adived

  Erik

  You solved this problem?
  I m asking because this community forum talking about Toshiba digital products like laptops, tablets, and TVs
  I doubt that you will find here a few specialists printer.

  However, I recommend you to check this page from Toshiba for printer product information and specifications
  https://electronicimaging.Toshiba-Europe.com/

• Toshiba e-Studio Ghost Prints

  Hello world
  I have a very strange problem ever happen before... I use Win 7 and I have toshiba e studio 351 in my local network with other computers, until a few days ago, I was using eStudio-451 drivers and work perfectly for 1 year. A few days ago it stop printing, quite strange because:

  -the works of Copier
  -works to scan
  -J' use a static local IP address and I ping, all packed went well
  -tcp/ip active and all the other stuff, everything is OK
  -I can access the printer by IP address in any browser and change the settings
  -drivers installed/uninst etc seems to be OK in my PC

  Windows displays printing OK, the document "printing" to disappear, it's as if the printer eat. No jobs are showing in the job_status the printer...

  Any problem like this before?

  Thanks for your time

  Hi mate

  I m do not know if someone here in the forum would be able to provide support here since it is a laptop computer and the multimedia forum.

  But I found a nice page of Toshiba, where you could find support for printers and faxes:
  http://business.Toshiba.com/USA/support/training/index.html

  Here's a nice training for the priner video, you own
  http://www.toshibamedia.com/451C/CBT-451c031-load.html

  Hope this might help you a bit

• Toshiba e-Studio 167: printing documents ODT LibreOffice 4 Linux problem

  Hello

  I'm trying to solve a problem when I try to print some documents ODT of LibreOffice 4 (13.04 Ubuntu operating system) on a Toshiba e-Studio 167 printer.

  I have not received any response from my service technical so I hope someone can help me here.

  When the document contains fonts as liberation, liberation Serif, etc., I get a printed page with the following error:

  ERROR:
  invalidfont
  THE OFFENDING COMMAND
  $definefont
  BATTERY:
  --nostringval--
  WASRNP + LiberationSerif
  --nostringval--
  WASRNP + LiberationSerif
  --nostringval--
  --nostringval--
  17

  However, if export ODT file in PDF format and print PDF files or if I print another PDF Acrobat file, it is not a problem. It works too, if I print a document Word (doc) opened to LibreOffice (usually with a Times New Roman font); in this case, LibreOffice indicates that the document has Times New Roman font, although it is not installed on the system, at least I can't see fonts in the drop-down list. In these cases, that the document prints well, but the new ODT documents with fonts system fail, what happens?

  If I print in a local printer (HP Laserjet 1020), he has no problem with any document.

  I tried to apply the solution given in the son, but if I change the type of PostScript printer language, I get the same error:
  https://AskUbuntu.com/questions/69014/unable-to-print-from-LibreOffice
  https://AskUbuntu.com/questions/68909/problem-printing-in-LibreOffice-writer-but-not-in-Adobe-Acrobat-Reader-or-Evolut

  This is how I installed the printer driver:

  https://localhost:631
  Administration-> "Add printer".
  The wizard has automatically detected the network printer: Toshiba e-Studio 167 Foomatic / Postscript (en)

  This site says that the printer works under linux:
  https://www.OpenPrinting.org/printer/Toshiba/Toshiba-e-Studio_167

  Any help would be apreciated.

  Thanks in advance
  Juan José Alonso

  News about your problem?

  I found this page from Toshiba on e-STUDIO167
  http://business.Toshiba.com/USA/product/multifunction/small-workgroup/e-STUDIO167.html

  This brings me to the managers for e-STUDIO167
  http://business.Toshiba.com/support/downloads.jsp?SELCTD_MODEL=e-STUDIO167&AXN=SELCTD
  Unfortunately, there is no driver official Linux so can't say for sure if this printer is compatible 100% linux.

• Toshiba e-studio 206 does not print USB cable

  Hello! We have Toshiba e studio 206 which is installed with the usb cable.
  Official drivers for e-studio 206 granted official website (here and later - a Russian) had been installed without error, the device shows any errors as well and can be used as a copier or even scan via the usb cable.
  But when I try to print at least a test page - an error in the spooler window.

  Install the drivers, the printer as a COM-device. I read on the official website that this is normal.

  If Windows 7 (32 bit) - in the window 'Printers and devices' there is the printer itself AND a strange unknown device called TOSHIBA e Studio 206 (COM3).
  On Windows XP, it is all of the same except there is not that strange device.

  I'm sorry if I posted in the wrong forum, but given that this thing is a copier at the top (or so I think...) ...

  P.S:I tried using different USB cable - no effect. I guess, I'll try another while you wait for your kind answerrs... Thank you!

  Hello

  Have you installed other printers or drivers next to Toshiba e-studio? If Yes please try to remove them and test it again.

  In addition, I would recommend to reinstall the drivers for the e-studio again. Delete the current version and restart the computer. Then install the latest version you can find on the page of Toshiba.

• Toshiba E-studio 163 printer - cannot print

  Hello
  Google Translator :)

  I have a photocopier / printer, Toshiba e-studio 163

  My computer can no longer print and no error message for him the file is received by the printer.
  I try to install the printer on another computer, and the result is the same.

  Is there a hard reset on this printer?
  A card with a fuse to test?
  driver update doesn't change anything.

  The "data" indicator does not illuminate when sending a file to print.

  Thank you for helping me

  Hi reliefmicro,

  To be honest, I can t say much about here and printers Toshiba it computer s system forum so most of the chatter are on laptops and Windows...

  But I found something that might be interesting for you:
  http://copiers.Toshiba.com/support/index.jsp

  It s a special page of Toshiba on printers and maybe you will find your answer there! :)

• What is the Toshiba e-STUDIO C 2540 print photos?

  I was wondering if it will print on photo paper, good or not?

  Hello

  Yes, you can print photos on Toshiba e-STUDIO C. 2540

  For more information, contact Toshiba:
  http://copiers.Toshiba.com/USA/support/training/index.html

  Check if that helps.

• I have a toshiba laptop with vista, somehow, I managed to move the taskbar from the bottom to the side, I want to put down once again. How do I do that? Thanks in advance

  I have a toshiba laptop with vista, somehow, I managed to move the taskbar from the bottom to the side, I want to put down once again.  How do I do that?  Thanks in advance

  I have a toshiba laptop with vista, somehow, I managed to move the taskbar from the bottom to the side, I want to put down once again.  How do I do that?  Thanks in advance

  First, make sure the taskbar don't are not "locked"...
  Right-click on an open space of the taskbar > make sure there is no checkmark at "lock the taskbar".

  Now, make a left click inside of a space open to the taskbar and HOLD > drag the slider down until he goes back down > drop PREY > lock the taskbar. For the benefits of others looking for answers, please mark as answer suggestion if it solves your problem.

• printer drivers for toshiba e-studio 605 64-bit for Windows 7.0

  I need to install tohsiba e-studio 605 in the 64-bit version of windows 7.0, thank you for giving me the location

  Hi Magnoor,

  Download and install the Toshiba e-studio 605 from the link below and see if it helps.

  http://www.Estudio.com.SG/download.aspx

  Good day!

• Toshiba e-studio 5540C acting weird

  On our 32-bit vista computers, I have a Toshiba 5540C (with latest drivers) when a user tries to print a word or pdf doc it bizzar error error codes.

  In my opinion, you're on the wrong place here. This is a forum for computer systems and maybe you should contact your local dealer or service dealing with printers and ask for help.

• PROBLEMS of FAX Toshiba E-Studio 250

  Hello!
  I don't know if this is the place to post my problem...

  I have a Toshiba E-Studio 250, and I have a problem of fax.

  I have a fax / Tel (RDS & RCS - my local provider) connection

  Now, my problem:

  When I am reciving a FAX - my 'PHONE' will Flash for a few seconds and nothing happens.
  When I'm sending a FAX same old story, the 'PHONE' flashes and nothing happens.
  If I press the "MONITOR" button, I heard the fax tone.

  My Toshiba has a 'LINE' jack so I divided the two-1 cable cable goes on the phone and the other in the Toshiba.

  Hope you understand my English is not so good. Thank you one Please HELP! (I'm desperate)

  Hello

  It is a forum on the problems of laptops and options & Accessories questions.
  If don t think that if someone would be able to help you here, but I found a manual for the 250 e - Studio
  http://www.Toshiba-SA.NET/download_operator_manuals/e160_200_250/e-STUDIO_160_200_250_Operators_Manual.PDF

  Here you can find the Support from Toshiba page to print, copy, Fax, Scan and e-mail devices
  https://electronicimaging.Toshiba-Europe.com/

• Re: Drivers for Toshiba e-STUDIO 160

  Hi, I have an old toshiba e-STUDIO 160 MFP and I was wondering can I use it with Ubuntu Linux.
  I am looking for drivers, but without result.

  You can help me because all my PCs are Ubuntu Linux, and they cannot function without a printer.

  But you now that Toshiba doesn't support Linux, right?

• How to run the Manager user interface programmatically

  I am looking for a method to run programmatically (from Labview), the Manager user interface, and then to connect it.

  Is there an API from .net to who?

  Thank you

  Note: I developed for earlier versions of VeriStand, a high-level application that manages projects of test benches and their versions. I want to update with the new manager of the user VeriStand interface.

  It is not a .NET API to control UI Manager, but there are some command line utilities, you can use to launch the user interface Manager, open a specific project, specify the IP address of the gateway to use and connect automatically.

  Try the following command line arguments:

  /nivsprj 'c:\project.nivsprj' Gateway localhost / connect

  They are documented in the online profile of Stimulus help editor.