Toshiba NB550D - using security in Asia.

Similar Questions

• TOSHIBA drive HARD Secure Erase and performance improvement

  I have 2 years Toshiba laptop with a HARD drive. I want to improve its performance. I need help on this.

  I've heard that "secure erase command will restore you the SSD for plant.
  write performance. What Toshiba HDD? Is it possible to restore Toshiba HDD to
  performance of the plant or at least significantly improve its performance?

  Can I use Secure Erase for this? I know some third-party programs
  who can run the secure erase command ('Parted Magic': [http://partedmagic.com/], "HDDErase": [http://cmrr.ucsd.edu/people/Hughes/secure-erase.html]). Are they enough secure, can recommend you? What is the best? Is there any Toshiba software that can do the same thing?

  I know a few standard methods to HDD in a healthy state as hard drive defragmentation on a regular basis.

  HARD drive model: Toshiba MK5075GSX

  Thanks in advance.

  PS: I'm new to this forum, so if this is not the right place to ask redirect me when this.

  > I have 2 years Toshiba laptop with a HARD drive. I want to improve its performance. I need help on this.
  I have 5 years Toshiba laptop and I had the same plan. I've swapped original HDD with SSD and upgraded RAM to the maximum level (8GB). After doing this I installed the original recovery image and optimized it preinstalled version of Windows.

  The difference is simply amazing. For example, start Windows went from 2 minutes 30 seconds. I think I don't need to write more info on laptop's performance now.

  SSD and RAM upgrades can be done in most cases, by the owner of the laptop and without any risk.

  If you need some good advice do not hesitate to ask.

• Ubuntu 10.04 Toshiba NB550D Bluetooth and the microphone does not

  I use Ubuntu 10.04 on Toshiba NB550D. I like it. I've updated to 4 GB of RAM so... 1 GB seemed crazy to me... and I am a user of power... but not a gamer. The laptop has replaced my work computer. I have plug into my 24 "LCD at work and get beautiful HD resolutions.

  My only frustration at this stage is that the microphone and bluetooth both do not seem to work. Until someone told me that Toshiba does not support linux on this hardware... I know. However, someone at - it this work themselves? I'd love to hear about your experience.

  THX,

  Fenton

  Hi Fenton

  With regard to the Bluetooth - I think the NB550D uses a list drop-down-card Atheros WLAN and Bluetooth. Am I wrong?
  If so, there seems to be general problem getting the BT works correctly, wireless works well however.
  I filed a bug on Fedora Bugzilla regarding this problem on a R830 - uses the same module I think.
  Link: [https://bugzilla.redhat.com/show_bug.cgi?id=734369]

  Concerning firstly the mic - basics:

  -did you check the audio input settings and increase the logging level?
  -have you tried an external mic? You can for testing purposes use a headset / headphones as a microphone as they work exactly the same. You may have to shout to get any input however :)

  If the external mic works you can try to start the machine on 11.04 or maybe even a pre-release version of 11.10.
  This is to see if the MIC - the problem is resolved.
  If so, I think that a few searches on Google will provide you with a solution!

  In any case, let us know your findings, so we can help you.

  See you soon

  Tom

• I bought an iphone6s from Lithuania, EU. At the back of the box, it is printed "Aproved for use in all countries of the EU". Does this mean that I can't use it in Asia?

  I bought an iphone6s from Lithuania, EU. At the back of the box, it is printed "Aproved for use in all countries of the EU". Does this mean that I can't use it in Asia?

  It does not mean that you cannot use it in Asia. It cannot be repaired in the European Union, however, and may not work with LTE networks in other parts of the world.

• Connection by using the stack of Toshiba BT using Service GUID.

  Hello
  I need you connect using the battery of Toshiba BT using Service GUID.
  Can someone help me with this?

  Hello

  Yes, maybe someone can help you if you offer more details about you and your problem:
  -Portable
  -Operating system

  In addition, it would be interesting to know what device you want to connect, and you understand under Service GUID

• How to remove virus alive security Platinum my win xp32 sp3 and using security essentials

  How to remove virus alive security plate of my Windows XP32 SP3 and using Security Essentials ANTI VIRUS SOFTWARE

  Here's a removal guide specifically for the infection:

  http://www.bleepingcomputer.com/virus-removal/remove-live-security-Platinum

• Block traffic using security groups.

  I want to block all traffic between two virtual machines, for which I created the security in Service named composer SG-WEB group.

  In the DFW, I have two simple rules:

  

  One rule that block traffic between the SG-WEB security group and another which helps everything. But I can still ping WEB1, WEB2 and vice versa. Of the ESXi if I look in the log of the FW I see traffic is allowed for the L2.

  If instead of security groups, I use subnets, everything works fine. I know I have used security groups to identify the DFW traffic, but here does not at all, is this a bug or I'm missing some configuration required to achieve this?

  Thank you.

  What is the status of the VMware Tools in these virtual machines?

• Problem of recovery of TOSHIBA NB550D-111 due to the error of the stormwater management

  I own a NB550D-111 (pre-installed W7 Starter 32-bit SP1, av Security Essentials), used mainly for navigation, chat and Skype. After the updates of July, BONE began to greeting me with blue screen every startup. I chose "Startup Repair", and after twenty minutes and a reboot, the operating system was running. On the next reboot, the same scenario. Whenever I ran "Startup Repair", sometimes 3 or 4 times to get the system working.
  I did a system restore, but no luck. Still the same blue screen at startup. I ran past check disk at startup of the prompt and/f/r, no error found. After four days, the startup repair couldn't solve the blue screen, although I spent almost 4 hours of restarting and either Startup Repair choose or do the system restore.
  I went to Restore Factory Settings OS since the recovery partition. I wanted to keep the My Documents folder, I changed the location of the second partition). ImageX gave an error to 70% in application of the image (a .ttc file that cannot be copied), and after that restart BOOTMGR is missing. I used the recovery usb key made shortly after I bought the netbook via Toshiba Recovery Media Creator, wich wiped clean the HARD disk (possibly lost my files, she), re-partitioned and copied the .swm files into the folder HDDRecovery. When you apply the C: partition image, Imagex also gave an error at 70%, the same ttc file.
  I installed a clean copy of starter, installed SP1 and updates and activated online using the serial number of the COA sticker. Initially, the newly installed operating system was incredibly fast (I only have drivers and card Flash not installed, no other application from Toshiba), but after SP1 update start time three times. My previous experiences with Windows XP, an integrated installation of Windows SP behaves better than an update with windows update. I think of a way to reinstall the Toshiba Windows, still full of bloatware as it is, then stop the programs that I don't use services.msc and msconfig hollow (just like I did when I bought the netbook).

  Post edited by: bogdanmardare

  I thank very you much for your detailed job offers.

• Satellite P300D - problems with WLAN using security 'WPA '.

  Hello everyone.

  I need your help. My new laptop Satellite P300D makes me angry.

  I want to use the WLAN using "WPA" security on my router, but this seems to be a problem.

  The notbook is able to find the WIFI network, but there is no possible connection.
  Then I tried to switch to 'WEP' and now it works!
  But there is always a problem: I have a Nokia Cellphone and this equipment use 'WPA '.

  So please help me: are there any known issues using "WPA security?

  What can I do?

  Best regards

  Sven

  Hello

  What operating system do you use?
  It is the operating system preinstalled by Toshiba or have you changed your Win XP?

  If you are using Win XP, see this MS site:
  http://www.Microsoft.com/windowsxp/using/networking/expert/bowman_03july28.mspx

  PS: You should also check if your BIOS is up to date and should update the Wlan driver.

  The WLan drivers can be found here:
  http://APS2.toshiba-tro.de/WLAN/

  There are different drivers for Intel and Realtek WLan Atheros card. Therefore, it must first check the WLan card you to ensure that you have chosen the right driver!

  See you soon

• How to get the sound on Toshiba 32L6353DG using D - sub?

  Hello

  I own a Toshiba TV model 32L6353DG I want to connect with my laptop via D - sub! What I did OK! No problem at all! Now, I want to hear the sound of the TV and not cell phone... that's the problem!

  I can't find a solution!

  As far as I know using this connection, you can transfer a video signal only. If you want sound on the TV you use another cable to send the audio signal to your TV.
  What you need is cinch cable.

  On one side you have to connect it to your laptop using headphone jack and on ports audio-in TV (red/white).
  You need something like this double Cinch RCA (1/8 to RCA).

• Some problems with Toshiba 40LV933G using the Serbian language settings

  Hello

  I have Toshiba 40LV933g TV a few months already.
  The firmware version is finally a 1.00.08.
  And I have some problems with it, which I think can be corrected in some of the new firmwares (if there is one).

  First of all, when I select Serbian language 'Move' in media player is not translated.

  Secondly when I select the Serbian country in the menu I can't automatically scan for DTV and ATV ATV just of channels.

  Third and the greatest problem is medial Player do not support these last Serbian latin in subbtitles as:? šŠ?? žŽ
  and there is no possibility of changing the size of this last subbtitle. Things like this other brands are already supported.
  * also the time between changing channels is long enough *.

  Best regards.

  I noticed the same problem with subtitle on my TV Toshi when I use the media player (movie recorded on USB key). These Latin letters are not displayed correctly.

  I also hope that this can be corrected with new firmware.

  By the way: do you know where you can download the latest version of the firmware?

• Toshiba NB550D Wireless-N

  I have a router Linksys WRT120N today that uses 802.11n (2.4 ghz) but I had problems connecting my NB550D to the router, I can connect to the wireless G project of course but when I put the router Wireless N mode, the netbook still sees and recognizes the router wireless 802.11 g but it is impossible to connect the netbook uses the Atheros AR9002WB-1NG built into the adapter, but I see no configuration option to switch to the project.

  Large. ;)

• Bought the model demo Touchpad, should I use Secure Full Erase WebOS account?

  Hi all

  Just picked up a new Tablet from HP Touchpad today and work out the kinks in there. Pretty good so far, but on a new snag has WebOS to come. The Tablet I bought was the store demo model that is apparently already set up with a generic soil profile demo. Unfortunately apparently you can create a new account WebOS via the Setup Wizard initial turning on the new device for the first time. At this point it would be better for me to use the "Secure full erase" options in the system settings to a factory default mode and would it prompt me to create a new account/profile as if I just bought new store?

  Thank you!

  DJ

  WOOT! Worked thanks a lot! On the waiting game now also for WebOS servers.

• Photosmart 6510 using security EWS

  After you have set a password for the security in the Photosmart 6510 Embedded Web Server (EWS), how one login for the Server Web integrated to make changes? and

  1. What does putting a password prevents other users to do exactly?

  2 are there instructions or examples using SAP?

  I'm new to this Photosmart 6510 and explore the SAP environment.

  Hello mcb-beginner,

  Once you have entered your password that you want to close and reopen the SAP. When you click on a tab as parameters or network, you will get a window asking for the password to access the password tab. If you set the password and then click on apply it is defined. If you enter it once again he will give you the update message.

   

• ADF Mobile | using secure web services

  
  Hi all

  I'm pretty new to ADF Mobile, I use JDev 11.1.2.4.

  In my Mobile application I want to use the secure web service.

  Here's what I do:

  1. creation of a data control based on the WSDL binding.

  2. get the web service methods in the data control.

  3. during the race, I'm getting that error "oracle.j2ee.ws.client.jaxws.JRFSOAPFaultException: Client from server SOAP fault: Missing < wsse: Security > in the SOAP header.

  When trying to run the WSDL binding in SOAP UI, I need set request username and passwordproperties, then only I will be able to invoke this web service.

  Here, my question is where can I set these properties for the data control to the web service ?

  Please suggest.

  Thank you

  Vieu

  Hi Shay,

  Thank you very much for the reply, I'm able to resolve the problem with the approach mentioned user guide.

  I forgot to set it up for the first time: ADF Mobile allows you to specify a custom provider class in your DataControls.dcx file. This custom class extends oracle.adfinternal.model.adapter.webservice.provider.soap.SOAPProvider . You can use it to specify an implementation of the SoapHeader[] getAdditionalSoapHeaders() method

  Example 9-1 shows how to extend the SOAPProvider and create a custom header has shown in example 9-2

  package provider.ebs.soap;

  Import oracle.adfinternal.model.adapter.webservice.provider.soap.SOAPProvider;

  Import oracle.adfinternal.model.adapter.webservice.provider.soap.SoapHeader;

  SerializableAttribute public class EBSSOAPProvider extends SOAPProvider {}

  SoapHeader public getAdditionalSoapHeaders() {}]

  SoapHeader header [] = SoapHeader News [2];

  SoapHeader token = null;

  SoapHeader user = null;

  SoapHeader pass = null;

  header [0] = new SoapHeader ("http://xmlns.oracle.com/apps/fnd/soaprovider/plsql/fnd_user_pkg/",

  "SOAHeader");

  header [0] .addChild (new SoapHeader)

  "http://xmlns.oracle.com/apps/fnd/soaprovider/plsql/fnd_user_pkg/,"

  "Responsibility."

  'SYSTEM_ADMINISTRATOR'));

  header [0] .addChild (new SoapHeader)

  "http://xmlns.oracle.com/apps/fnd/soaprovider/plsql/fnd_user_pkg/,"

  "RespApplication,"

  'SYSADMIN'));

  header [0] .addChild (new SoapHeader)

  "http://xmlns.oracle.com/apps/fnd/soaprovider/plsql/fnd_user_pkg/,"

  "SecurityGroup."

  'STANDARD'));

  header [0] .addChild (new SoapHeader)

  "http://xmlns.oracle.com/apps/fnd/soaprovider/plsql/fnd_user_pkg/,"

  "NLSLanguage,"

  'AMERICAN'));

  header [0] .addChild (new SoapHeader)

  "http://xmlns.oracle.com/apps/fnd/soaprovider/plsql/fnd_user_pkg/,"

  "Org_Id."

  "0"));

  header [1] = (new) SoapHeader

  "http://docs.oasis-open.org/wss/2004/01/oasis-200401-wss-wssecurity-secext-1.0.xsd,"

  'Security');

  Token = new (SoapHeader

  "http://docs.oasis-open.org/wss/2004/01/oasis-200401-wss-wssecurity-secext-1.0.xsd,"

  "UsernameToken");

  User = new (SoapHeader

  "http://docs.oasis-open.org/wss/2004/01/oasis-200401-wss-wssecurity-secext-1.0.xsd,"

  "Username."

  "sysadmin");

  pass = new (SoapHeader

  "http://docs.oasis-open.org/wss/2004/01/oasis-200401-wss-wssecurity-secext-1.0.xsd,"

  "Password."

  "sysadmin");

  Header [1]. AddChild (Token);

  token.addChild (user);

  token.addChild (pass);

  Returns the header;

  }

  }

  Kind regards

  Vieira