How to get the sound on Toshiba 32L6353DG using D - sub?

Similar Questions

• How to get the frame number current timeline using jsx?

  How to get the frame number current timeline using jsx?

  Thanks for the link!

  Clarification: I was looking for the current image on the timeline of the video. OP he mentions that he had found how to get that so I searched a bit more and found this thread: Re: can I inpoint in read/write and out-point of the clips in a group of video with scripts? They have the following functions, I have not tried yet, but it seems like it should work.

  function getCurrentFrame() {}

  try {}

  Var ref = new ActionReference();

  ref.putProperty (charIDToTypeID ('Rprp'), stringIDToTypeID ('currentFrame'));

  ref.putClass (stringIDToTypeID ('timeline'));

  var / / desc = new ActionDescriptor();

  desc.putReference (charIDToTypeID ('null'), ref);

  var TC = executeAction (charIDToTypeID ('getd'), desc, DialogModes.NO);

  Return TC.getInteger (stringIDToTypeID ('currentFrame'));

  } catch (e) {return null ;}

  };

• Satellite A200 - how to get the sound on the TV?

  Hello

  Im trying to set up my laptop through the TV so I can watch videos via my TV, I have the part well display using an S-video cable but I do not know how to switch the sound of the TV/Surround Sound System.

  Someone can give me a guide or helps to do this?

  Thank you

  Merrry Christmas and happy new year

  Very interesting thread about a similar problem that you find under http://forums.computers.toshiba-europe.com/forums/thread.jspa?messageID=69026

  Check what Miro wrote and what he uses to get the transfer of audio and video signals to external devices.
  If you still have any questions please let us know.

• How to get the CPU usage in LabWindows using C program

  Hi all

  Please help me...

  How to get the CPU usage and the use of the RAM in LabWindows CVI 12.0 using C.

  Any help with this will be appreciated.

  Thank you in advance

  
  

• Qosmio G40: How to get the sound on 4 speakers rear

  Here's the thing, 3 days ago, I bought the G40 model. I needed a laptop on which I can work with Photoshop, Illustrator and Corel Draw.

  When I bought it, I went on site update from toshiba to see what is new and what I need to be updated. Afterwards, I checked on a few other sites of manufacturers (realtek, nVidia, etc.) which is new, because they get the first pilots.

  I noticed that there is a new driver for sound card for this computer so I decided to donwnload it and run the drivers. Everything went well, but after installation I lost the option DolbySurround and instead of all 4 bass speakers, only 2 speakers worked so I decided its better to revisit the original Toshiba drivers.

  After that I downloaded the drivers from the Toshiba site, installed and put to day all, I noticed that the software for audio, downloaded from Toshiba site has no dolbysurround option. Help, please!

  Secondly, I also removed the TOSHIBA accessibility option, which is to control the 'F' keys After that, I can't turn the Touchpad mouse. Help, please? Ideas, suggestions?

  What to say dude. Seems to be something wrong with any system files or registry entries
  Why change something if you have no problems?

  Take my advice and never change a running system ;)

  So now your problem and some advice how to solve this stupid question!

  I would recommend to restore the operating system to the point of time at the beginning. Use the tool from Microsoft called system restore.
  Eventually, you know this tool since the MS XP OS.
  You should find somewhere in accessories.

  If this procedure is not enough, you could use the Toshiba Recovery CD and could reinstall the whole OS!
  But before you make the installation of the recovery CD don t forget to back up your important data! ;)

  Good bye

• How to get the sound on my laptop

  Hi Paul, I have the same problem on my DV2700TV Windows Pro 64-bit 10. There are two listed hardware ID. An id seems to be complete while the 2nd id is a part of the identification. I don't know how to remove this partial code. I think that this is the reason why I have no sound from my speakers by default. In addition, my system came with a digital HDMI connection. It seems that all the sound is routed to the digital connection, even if the speakers are set by default. I have tried everything I know and the recommendations of this site, but no joy. I hope you can help.

  Plenty of ID = HDAUDIO\FUNC_14F1 & DEV_5051 & SUBSYS_103C30CD$ REV_1000

  Partial ID = HDAUDIO\FUNC_14F1 & DEV_5051 & SUBSYS_103C30CD

  In addition, I updated the driver and now the identifiers are:

  HDAUDIO\FUNC_01VEN_14F1 & DEV_5051 & SUBSYS_103C30CD & REV_1000

  HDAUDIO\FUNC_01VEN_14F1 & DEV_5051 & SUBSYS_103C30CD

  I tried everything you say, but still no joy. Attempt of reaction to update the driver, a dialog box States that the best driver is already installed. I ran the resolution of problems and he couldn't identify the problem.

  Well Paul, I made sure I have the latest drivers installed, just click the sound icon in the taskbar and opens "playback devices". I selected "Speakers" as the default device selected then the device properties I selected the 'Advanced' tab and selected to any quality format that recognizes the soundcard. I chose 16 bit, 41000Hz. I clicked on apply and then chose the "improvements" tab and put a tick in 'Disable all improvements' and click apply then OK to close the dialog box that brought me to 'Read' settings I clicked on 'Configure' and click on the test button and guess what... I got better I got front and sound. No scratching noise. More funny thing is, I went back to the Advanced tab in the properties, and the default format has been set at 24 bit, 48000 Hz... so better sound quality.

  I think I made this a thousand times over several months, uninstalling and reinstalling drivers with no joy. Maybe it has something to do with the order, in that I did... I don't know but I'm a happy camper. Thanks for your help and your patience.

• Satellite Pro A300 - how to get the sound on the TV with VGA cable?

  Hello world

  I have a real problem connecting my Satellite Pro A300 to my Samsung HDTV.
  The video works fine - I used a VGA connection on the laptop and the TV.

  The problem I have is healthy.
  I want the sound either also come from the TV. I tried a jack of 3.5 m from the headphone jack of the laptop to a red and white connection RCA audio on the TV, but it doesn't seem to work.

  Does anyone have any ideas or advice?
  I need of additional drivers, etc., or do some settings need to be changed etc etc.

  Hello

  Normally, to use the 3.5 mm jack plug in the headphones, you need an adapter cable.
  At one end, it has a 3.5 mm jack and the other side to connect red and white audio RCA connections.
  Here is an example of what I mean:
  http://www.optimization-world.com/IMG/prod/3_5_mm_rca_audio.jpg

  I m using such an adapter without any problem. You n t need an additional driver, or something more. It's the same as if you were using a helmet. :)

• How to get the gif file hosted by using the Http connection?

  Hello

  I have an application that downloads animation gif from a server by using the http connection. Here is the code I use to download the image.

  try {
  
              httpConnection = (HttpConnection) Connector.open(url, Connector.READ_WRITE);            httpConnection.setRequestMethod(HttpConnection.GET);
  
              if (httpConnection.getResponseCode() == HttpConnection.HTTP_OK) {                DataInputStream dS = httpConnection.openDataInputStream();
  
                  byte[] data = new byte[dS.available()];                dS.read(data);
  
                  gifImage = (GIFEncodedImage) EncodedImage.createEncodedImage(data, 0,data.length);
  
              } else {                throw new Exception("ResponseCode:" + httpConnection.getResponseCode());            }        } catch (Exception e) {                        gifImage = null;            e.printStackTrace();        }
  

  the problem with this code is, when the gif file is 1175 bytes above, it does not load the gif.

  example:-If the gif on the server is 1500 bytes, this code retrieves only 1175 bytes.

  I think that the rest of the bytes are sent in a different package. But how to get them.

  can someone please provide a code for buffering the inputstream?

  any help is appreciated.

  Dieye

  Hmm, nobody seems to know how to do, it seems. Here's how I did it.

              httpConnection = (HttpConnection) Connector.open(url, Connector.READ_WRITE);
              httpConnection.setRequestMethod(HttpConnection.GET);
  
              int responseCode = httpConnection.getResponseCode();
              if (responseCode == HttpConnection.HTTP_OK) {
                  inputStream = httpConnection.openInputStream();
                  ByteArrayOutputStream byteArrayOutputStream = new ByteArrayOutputStream();
  
                  byte[] buffer = new byte[256];
                  int len = 0, imageSize = 0;
  
                  while (-1 != (len = inputStream.read(buffer))) {
                      byteArrayOutputStream.write(buffer);
                      imageSize += len;
                  }
  
                  byteArrayOutputStream.flush();
                  byte[] imageData = byteArrayOutputStream.toByteArray();
                  byteArrayOutputStream.close();
  
                  gifImage = (GIFEncodedImage) EncodedImage.createEncodedImage(imageData, 0, imageSize);
  

• How to get the storage allocated profile and used the plugin vCloud 5.1 Vdc

  How can I get the storage allocated and used for a Vdc in vCloud 5.1 plugin?

  VCloud plugin 1.5, there was a property of VclVdc.storageCapacity give us the space allotted, limit, use (s) and overhead costs.

  VCloud plugin 5.1 we allways null VclVdc.storageCapacity. Then VclVdc.getStorageProfiles () but presents the objects, there is that the "limit value".

  ¿WHERE are the other values?

  I have attached two screenshots. vCloud console shows the data, but not vCloud plugin.

  Thank you very much.

  Damian

  Tell me if this work. This was written in a few minutes.

  var host = vdc.getHost();
  
  var queryService = host.getQueryService();// toAdminObject().getAdminQueryService();
  
  var profs = vdc.getStorageProfiles();
  
  for each (var prof in profs) {
  
      var expression = new VclExpression(VclQueryAdminOrgVdcStorageProfileField.HREF, prof.getReference().href  , VclExpressionType.EQUALS);
      var filter = new VclFilter(expression);
      var params = new VclQueryParams();
      params.setFilter(filter);
      var resultSet = queryService.queryRecords(VclQueryRecordType.ADMINORGVDCSTORAGEPROFILE,params);
  
      while (resultSet != null) {
          var records = resultSet.getRecords(new VclQueryResultAdminOrgVdcStorageProfileRecord);
          System.log(records.length + " records found");
              for each (var record in records) {
                  //obtain data from record
                  System.log("storageUsedMB : " + record.storageUsedMB);
                  System.log("storageLimitMB : " + record.storageLimitMB);
              }
      resultSet = resultSet.getNextPage();
      }
  
  }
  

• How to get the code PIN Blackberry 10 using javascript for BB10 Webworks App?

  Hi all

  I have developed web application for blackberry 10 using the emulator to ripple and Blackberry 10 Webworks SDK 1.0.4.11.Here I put the automatic connection of my web application... So I want to get the Pin 10 of Blackberry number using javascript... Please help me... Someone knows... Thank you very much...

  Kind regards

  Marimuthu_P

  Which is documented here for WebWorks 2.0: https://developer.blackberry.com/html5/apis/beta/blackberry.identity.html#jbo1385148789774

  and here for WebWorks 1.0:

  https://developer.BlackBerry.com/HTML5/APIs/gold/BlackBerry.identity.html

  You want the uuid property.

• How to get the details of VM settings using cli power?

  Hello

  I went through the link http://communities.vmware.com/thread/325036?tstart=0 which has been very helpful. However I want to know is there anyway I can get the details of the VM?

  I want Hardware, tab Option and details tab resources of the virtual machine that we see in the VM-> change the settings.

  My main concern is to get the details of the memory of the virtual machine. There are several virtual machines in my infrastructure on which memory is limited to less amout then what is given to the virtual machine.

  As for example in one of the virtual machine, we had problem where after troubleshooting, I discovered the memory assigned on Hardware tab is 16GB while the resource tab it is limited to 8 GB, which caused the driver lock memory to have other tools to use.

  Concerning

  Do you get the version number?

• How to get the webservices project customer specific use Oracle.

  I have a Web services project I developed in VS2005 where I use the Oracle.DataAccess.dll provided by Oracle 10 g ODAC to connect to an Oracle 8.1.7.4 database. I add a reference to the dll in the folder c:\oracle\product\10.2.0\client_1\ODP.NET\bin\2.x. I create and publish Web services and checked that Web services are working correctly. I ran into problems when I installed the latest version of the ODAC for Oracle 11, where the webservice Gets the following error ORA-03134 - this version of the server connections are more supported. Based on what I read here and ther panels, it seems that when I installed the ODAC for Oracle 11 he installed a policy file that redirects all calls to use Oracle 11 components data access rather than that I've specified explicitly in my project.
  
  Is it possible for me to always have the components of Oracle 11 working side by side with Oracle 10 g and forced my project to always use the components of Oracle 10 g?
  
  Published by: lordharlock on March 3, 2010 07:17

  Hello

  I just did a quick test with binding in an app.config file redirection, and has precidence over policy in the gac file.

  Here's my app.config. I compiled with 2.102.2.20, the app ran with 2.111.7.0, despite the 2.111.7.20 policy in the gac file.

  It will be useful,
  Greg

• How to get the sound of my computor when watchig itv/player

  How do you get sound on your computor, when you look at itv/player

  Hi Valerie,

  ·        You go to ITV Player via Internet Explorer or a different browser?

  ·        You are able to hear sound on other Web sites and applications?

  In more than the suggestion of David, if you use Internet Explorer to play ITV and confrontes face the question, try the steps below and check to see if it helps:

  A. open Internet Explorer and click on tools

  B. click on Internet option and click the Advanced tab.

  C. scroll to multimedia and select the option "play sound in web pages".

  D. click on apply and Ok.

  Restart Internet Explorer and check if you can hear the noise in the ITV player.

  You can also navigate to the link below and follow the steps in the article to solve his problem in ITV player. http://www.ITV.com/help/itvplayervideohelp/videofaqs/#10

  Hope this helps and let us know the result.

  Thank you and best regards,

  Srinivas R

  Microsoft technical support.

  Visit our Microsoft answers feedback Forum and let us know what you think.

• Camileo Clip as a webcam: how to get the sound from the microphone?

  Hello.
  The * Camileo Clip * might be a nice * webcam * _If there... the sound_ with the video.
  Is it possible to have the * microphone * the task force Camileo Clip when used as a webcam?
  Thanks in advance for your help.

  Hello

  Unfortunately I m not the Camileo Clip owner but according to details that I found on the Web pages, the camcorder can be used as a webcam so I guess you can also record sound by using the Clip as a webcam.
  Usually, you choose the default microphone for recording.

  Maybe you should check the settings in:
  Panel-> Audio-> recording (2nd tab from left) tab

  If the webcam mic would be visible, choose this option by default.

  I also recommend you to check the webcam settings and choose the video mode.

• Compaq Presario R3000 how to get the sound to work with Windows 7 RC

  (1) download SP29586.exe: ftp://ftp.hp.com/pub/softpaq/sp29501-30000/sp29586.exe

  (2) execute, create a swsetup c:\ directory

  3) once all files are extracted DO NOT INSTALL

  (4) now Goto the Start Menu click on devices and printers, click the name that you called your machine this will mark will be a yellow triangle as the audio driver windows 7 already installed is a realtek ac 97, which does not.

  (5) once your Machinename, you will see a general tab and then Hardware tab select the Hardware tab.

  (6) seeking the Realtek ac 97 under the functions of the device, select it and click Properties,

  (7) tab now the driver, now click on update driver.

  (8) select Let me pick from a list of device drivers, now click on disk

  9) click Browse, select the following Swsetup\SP29586\SMAXWDM\W2K_XP location and click smwdmCH6.inf

  (10) the Soundmax driver should come now select ok and next year. Now your sound will work

  Go on the side of Support HP and look for drivers for Presario R3000 and download the driver for Audio "SP28552" but do not install it. After you download the driver, search for the driver on the folder file download you too and right-click on it and select properties and then select "Change the setting for all users", once the pop-up window, select Compatibility Mode and select it for Window XP Service Pack 3 all the and click ok. Once you ok it click on the file to put in place and follow the steps.
  
  I did it on my Compaq Presario R3000 which has Window XP and I installed Windows 7 Enterprise 32 bit on it and it awesome except for the Audio that I just decided to work, but I still have problems with the Base system device drivers.
  
  I hope this help you with the problem of noise.