Photosmart 6510 using security EWS

Similar Questions

• EPrint does not print the spare part on Photosmart 6510 using MACBook ro

  When I send an email with attachments to my Photosmart 6510, it prints the email but not attachments

  What type of attachment you send?

  The file types are limited to Microsoft Office (some of them), image files (jpg, gif, tiff, and a couple more) and HTML formatted emails condition are not any dynamic material in them.  File size is limited to 5 MB for e-mail + attachment

  What does say in your ePrint centre?

• HP Photosmart 6510 series connects to the network and Internet, but not the computer.

  Hey all,.

  I have a desktop H8-1228 and 6510 e - printer.  I got both products at the same time.  I did the initial installation, and everything worked perfectly.  I was able to print of my HP Touchpad (the printer was on the floor and my Touchpad was down.).  Recently, I made a trip for two weeks.  I turned off the printer.  This seems to have been a mistake.  Now, he will only contact my network and Internet, but not the computer.  The Setup program keeps telling me that it is 'Impossible to find the printer' and that he wants me to check the IP address of the printer.  I did this many times by printing the HP's Configuration Page from the printer screen.  I also used Windows "Add a printer" without success.

  I have installed and uninstalled the software several times; every time that remove the icon of the printer and the Standard TCP/IP port in the "Devices and printers" section in Control Panel.  A few minutes earlier, I used Regedit to delete any reference to the series of HP Photosmart 6510 in the registry, believing that it could help my situation.  There can be no. :-(  I did the installation with the same problems that I had all the other times that I tried to install it.

  No help from you the printer experts will be greatly appreciated.  I'm not a novice as you can see.  This situation, however, launched my posterior. :-))

  Hi old_geekster,

  You may want to enable disable all startup programs in msconfig until you are able to access the Web integrated printer server. It seems that there is something in the communication with the printer's operating system blocking. It will most likely software firewall or security related.

  HP has designed a quick and easy tool that diagnoses and solves many problems of printing, scanning and connectivity: The HP Print and Scan doctor. HP recommend you to download and install Print and scan doctor no matter what time you need to solve a problem with your HP printer from the link below.

  I would like to know what are the errors you receive?

  http://www.HP.com/go/tools

• Photosmart 6510 does not print in black

  My photosmart 6510 does not print in black. I presume that it was the cartridge but I replaced the cartridge and it still does not print. I cleaned the print heads and the cartridge ink levels are full.

  The printhead, cleaning of the screen failed touchscreen printer running.  But when I sat down at my computer and used the program utility printing, he did.  I ran an initial print head cleaning my computer and then clicking the button indicating that the print heads were NOT clean.  He then ran a deep cleansing process.  Then I lined up the printheads of the same print utility program.  Now it works!

• HP Photosmart 6510 e - all-in on: print a picture

  I want to print on paper photo of android (Samsung Galaxy S6 edge).

  The printer is set to ask what tray. Nevertheless, it prints only on plain A4 of android.

  I used the build-in print function the and place paper 4 x 6 inches, the papertray photo value and finally used the application e-print and paper Photo Paper Type value!

  Any help would be appreciated!

  As I mentioned in the op, I tried the HP e-print application.

  But I found a solution, instead of choosing the Photosmart HP 6510 directly (with ip address), I chose Photosmart 6510 with l'[email protected].

  Apparently printing via hp service it does not accept the chosen paper size (4 x 6).

  It works:

  

  But it does not work:

  

  Any other suggestions?

• How can I create custom with the Photosmart 6510 printers paper sizes

  I want to use paper sizes personalized with Word or Photoshop.

  I have a Photosmart 6510 printer all-in-one.

  While I can find the custom size tab layout in Word and can set this size, I don't seem to be able give the new size a name or save it.

  Is it possible with this printer, or is there a workaround to avoid the message 'paper mismatch '.

  Thanks for the ay help I can get.

  I'm sorry not to come back earlier.  I stumbled across a work around for this problem.  Use a different print driver for the printer.  I'll link the instructions below.  Again, sorry I don't come back with the workaround as soon as possible.

  How to assign other drivers to print in different Versions of Windows

• Photosmart 6510: photosmart 6510 prints blank pages

  Printer was working fine.  Had to change the cartridge. First of all, I didn't have black and now I don't have much color either.  The printer says I had no real HP though now it shows that I do. I never bought my cartridges anywhere but the staples.  Printing October 2012 have changed many cartridges before you buy.  Followed everything I could find.  Still not printing.

  Hi @mjohns390,

  I read your post and see that you can not print in black or color now. I would like to help you today. If this helps you to find a solution, please click on the button "" accept as Solution"" down below this message. If you want to say thanks for my effort to help, click on the 'Thumbs Up' to give me a Kudos.

  Please, try the following steps to see if it will help solve the problem.

  Printer cannot print black ink or color ink or prints blank Pages.

  This document is for the cleaning of the cartridge and the contacts, check the tab on the cartridge and the printer reset. "Incompatible cartridge" or "indicated ink cartridge needs to be replaced" message on the c...

  If the problem persists, perform a power reset. A alphanumeric Code (example: ' 0 x 'r' C2...) ") displays on the front panel when printing. Do not take into account the title.

  This model has a permanent print head, this video shows you how to access the print head, so you can manually clean the printer and soak the printhead, it's my own personal recommendation, not one of HPs, is to use the solution proposed in the following videos.  I suggest only doing this if the printer is out of warranty.

  Once you get to the clock at 3:20 minutes, you can stop this video.

  Разборка HP Photosmart 6510 (disassembly Photosmart HP 6510)...

  This video is for a different model but it will provide the steps to move the print head and cleaning, also if you continue the video it will provide measures to remove the print head and soaking. Play video 01:24 minutes. HP 5510 will not print black and color - print head removed and cleaned.

  If you have completed all the above steps and your product still has a problem, service the product.

  I hope this helps. Let me know how make you out. Thank you.

• Photosmart 6510 - no computer"found" - "Scan to computer" not activated

  Hello

  With the help of HP Probook, with Windows 7 Professional.  64 bit.

  My Photosmart 6510, I cannot scan documents on my laptop. I think that this only started happening recently when I started to use AVG PC Tuneup software, but I have district check if this may be the cause that the scanner is aunable to detect the computer.  I get the following message:

  "No computer was found - make sure that the printer software is installed on your computer and that the 'Scan to Computetr' is enabled via the printer software.

  I uninstalled the software and reinstalled again.  When reinstall it wonder "Enable scan" I agree.

  Previously, the "Enable scan" message popped up whenever I have rebooted, but that has stopped so I think something may have changed.

  Any suggetsions would be welcome.

  TX, Kurt297

  Hello

  Please, download the following tool and run it on your computer:

  http://ftp.HP.com/pub/softlib/software12/COL50849/MP-135113-1/HPPSdr.exe

  Hope he will give some answers if not reinstall full feature software and drivers from following link:

  http://h10025.www1.HP.com/ewfrf/wc/softwareCategory?cc=us&LC=en&product=5058336

  Kind regards.

• Photosmart HP 6510: Personalized printing HP Photosmart 6510 problem

  I have read through a couple of threads and followed the instructions to turn on 'custom' on my HP Photosmart 6510 all-in-one printing. I loaded the driver of HP Deskjet 450, which finally allows me to select a custom size of 5.5 "x 8.25". I'm trying to print on wedding invitations response cards. Wedding invitations made the same paper 5 X and can be printed without adding a new printer driver for the 6510.

  Now that I can get the printer driver (deskjet 450) to recognize the custom format 5.5 "x 8.25" but I can't print. I use a model of design by Staples and get the following errors.

  Errors - the margins of Section 1 are set beyond the printable area of the page. Do you want to continue? I pushed Yes and the printer tries to print the job abd I get the error "paper mismatch". The printer actually determined the size of the paper when I adjusted the paper tray to accommodate custom size paper.

  Troubleshooting - I tried to adjust the margins, but I have little ability to adjust in the template provided. When I adjusted the margins, I always get the error "paper mismatch".

  Any ideas on how to do more troubleshooting?

  Hello

  Please retry the procedure which should solve the problem below.

  (if the printer is connected with USB)

  Click START > device and printer > add a printer > add a local printer >

  Select "Use existing Port" then Virtual USB from the drop-down menu, click on NEXT, in the production list, select HP / Hewlett-packard and in the right pane, select Deskjet 6980 and finish the wizard

  OR

  (if the printer is networked)

  Click START > device and printer > add a printer > add a local printer > choose "Create a new Port" > type in the printer IP address click NEXT, in the manufacture of the list, select HP / Hewlett-packard and in the right pane, select Deskjet 6980 and finish the wizard

• How can I scan with OCR with my hp Photosmart 6510? I want to scan to a text of the parameter file.

  I got a new Photosmart 6510 all-in-one printer. I have the ability to scan to a .jpg file ot a .tiff or a .pdf file - just like the pictures, no form of text that can be edited. On my old photosmart printer (a 2572) I was able to analyze OCR allows you to place the scanned document in a file with the Edition of the text, how can I do that with this new printer? I thought I was adding features, do not remove them. I use the 6510 wireless on a home network. I am also on the Windows Vista system.

  Thank you

  Hi nawa4,

  Software OCR Iris didn't come included with this printer. If you have OCR software installed on your computer, you should be able to scan using this program. If you do not have an OCR program installed you can check the link below.

  http://www.IRISLink.com/C2-2093-189/IRISCompressor---create-and-compress-PDF-files-in-a-click-.aspx?adwp=SAS-IComp-us

• HP Photosmart 6510 alignment Page failure, black ink cartridge not working not

  I'm on Mac OSX using the Photosmart 6510 AIO printer 10.7.4. I had problems before printing (black ink would not introduce yourself, sensor said that there was still a lot) so I ordered new cartridges. I printed a report of quality and the color came out great but black came out uneven. Then I used the align parameter and it printed once more uneven black ink and the screen on the printer read "the alignment page failed. It's frustrating, because the printer was used only at the end of last semester and he has not worked since I set up for this semester. Any help would be greatly appreciated, thank you!

  Ryan

  The steps in this troubleshooting page can help solve the problem.  If it is printing black but spotted I expecially make sure I check the vents and run a cleaning cycle.  If the above does not resolve the issue, see the post here.

• Photosmart 6510: PS 6510 won't print black

  Printer cannot print black ink. I ran the cycle of cleaning several times. The cartridge is new. Gets moderate use with periods where it is not used. The printer is out of warranty. Mention was made in another series of posts on this problem that there may be more specific than just running instructions once again the cleaning cycle.

  Try here.

  http://support.HP.com/us-en/product/HP-Photosmart-6510-e-all-in-one-printer-series---B2/5058334/model/5058335/document/c03760633/

  Let us know.

• HP Photosmart 6510 B211a unable to Scan

  I have a HP Photosmart 6510 B211a e-Print wireless printer/scanner, that I use with my desktop version of Mac OS X Lion 10.7.5 (Mac Mini) and, with the help of Parallels Desktop 7 for Mac, I use it with my Windows 7 PC.  I am not able to scan from my HP Photosmart 6510 to my PC and not able to scan from my PC to my HP Photosmart 6510.  Moreover, I am able to scan from my Mac to my HP Photosmart 6510, but unable to scan from my Photosmart 6510 to my Mac.  I want to be able to save scans on my PC (and not only on my Mac) and be able to scan from my HP Photosmart 6510.

  Also, I am able to print from my Mac and PC.  The State of the results of the wireless network Test, "no problem found.  Congratulations on the successful your printer wireless installation. »

  "When I try to scan from the HP Photosmart 6510 as a document in the file, I get the error message"Unsuccessful Scan"and"... the States please make sure that your computer is connected to the printer and try again. "When I try to scan from my PC (from measures taken by scan - scan a document or photo), I get a long error message title 'inaccessible Scanner.  I temporarily turned off my Mac and PC firewall, but I always encountered these errors.

  Recently, I changed my phone LAN Ethernet line.  Before this change, I had no problem (at the beginning, when I bought my Mac Mini and Parallels Desktop 7 for Mac, it was very difficult to get printing and scanning to work).  Now I don't know what else I can do other than HP Photosmart 6510 to uninstall and reinstall.  Before I do, I want to know if there is anything else I can do, and if someone else had a similar situation, especially those who use Parallels Desktop 7.

  Good news!

  I was not contacted Parallels, I found another HP discussion not being able to scan.  Embarrassing, I also realized that I never properly uninstalled my printer/scanner on Windows and Mac.  Firstly, I correctly uninstalled (i.e. completely) the printer on Windows and Mac, I reinstalled the printer for Windows using the floppy disk, found the site to download the latest firmware of HP, software and tools of the diagnostic utility (http://h10025.www1.hp.com/ewfrf/wc/product?cc=us&lc=en&dlc=en&product=5058336), reinstalled the printer for my Mac, run the tool of diagnosis utlity for printing on Windows (strange that it showed was installed my network printer but gave me an error that it) was not installed, so I clicked 'install'), and finally, I ran the scan on Windows diagnostic utility tool.

  I am now able to print and scan without problems.  Unfortunately, whenever I do a major change (upgrade of Parallels or MAC OS), I must start the process again.  At least now I have the process documented for future use.

  Thank you for your patience and your help.  I am ready to close this discussion as resolved.

• Photosmart HP 6510: HP Photosmart 6510 cannot print in black

  Like everyone, I tried all the reset standard and practices of head cleaning.

  Can anyone send me please the new reset instructions?

  Hi @gpn44,

  Welcome to the Forums of HP Support!

  I understand you have a print quality problem with printer HP Photosmart 6510. I'd be happy to help you and don't forget to come back to this thread and check "Accept as Solution", if I have successfully helped solve you the problem. If you want to say 'Thank you' to my effort to help, click on the "thumbs up" to give me a Kudos.

  Looks like you did a lot of good troubleshooting already. You followed this guide, Printers HP Photosmart 6510 - printer prints blank Page or does not print black or color ink?

  I can send you the steps to perform resets itself, however, I don't think it will do everything for the same problem.

  The cartridge is either dirty, defective or the print head is clogged. This print head is not removable, customer, but if the printer is out of warranty, you can try the steps outlined in these videos.

  This video shows you how to do a manual print head cleaning. I suggest you to watch the two videos before proceeding and use at your own discretion.

  Video: HP 5510 will not print black and color - print head removed and cleaned.

• Print a picture on plain paper with photosmart 6510 iPhone

  Any suggestions on how to print a picture on plain paper from an iPhone or a Mac to a Photosmart 6510?

  Hello

  If you use AirPrint, the default printer for the photo for a photo paper tray. Your best option is to use the application of e-Print HP - with this application, you can select the paper size and source.

  http://WWW8.HP.com/IE/en/campaign/Photosmart/eprint.html?JumpID=reg_r1002_ieen_c-001_title_r0001