Toshiba power saver disappeared completely

Similar Questions

• Problem with Toshiba Power Saver Tecra S1

  Hello

  I have problem with Toshiba Power Saver (GST).
  I installed SP2 on my WinXP Pro, and after this operation, all works well. After a few days GST on icon disappear from the task bar. When I open the Console from Toshiba, then GST I can see only incomlete standard dialog box. There is no configuration icons, but initially were, and I set all the settings. Now, there are 4 black boxes (2 small as a small icon) and 2 large as icon bigest at the bottom and a large black on the right.
  I try to reinstal GST, but it had no effect.

  Can someone help me

  Alex

  Hello Alex

  I have never seen anything like it. There is obviously some problems that doesn t allow the graphic illustration of the ATP. The first step is always reinstalling the software. I don't know what you need to do exactly. In my opinion, you should try to remove the GST and SP2. Install SP2 again and after this GST.

  If there is not the worst success solutions are preinstall the device using the recovery CD.

• Portege R500: Impossible to install XP in Toshiba Power saver

  Hello

  I have a protégé R500 PPR50E which had Vista on it, but now has XP on it.

  I installed all drivers etc for the laptop and everything works fine except that I can't get the toshiba power manager to install.
  Whenever it installs programs it shows as 0.00 mb and installation when you click to open the control panel in the Add box, or move the section it says "a fatal error has occurred. This program will be terminated - code 0 x 0 - and then if I try to uninstall it to try a reinstall it says: "1628 - could not complete the installation.

  Any ideas anyone?
  I downloaded the correct driver of course - I tried a redownload and it made no difference.

  Also - I may pluching at straws but in the Bios before I made the construction - I turn the controller as opposed to ACHI ACHI compability mode - don't know if it could have an impact on it? -If I turn that on XP blue screens because I never installed the driver in the windows install (f6 prompt)

  Hello

  I believe that you are unable to install the Toshiba power saver.

  We should focus on this error message:
  * 1628 - cannot complete installation *.

  Usually, this message may appear when installing any software that uses the InstallShield Setup program. According to InstallShield, this is a general error message indicating that the application has not been installed successfully.

  Solution check this:
  http://knowledge.Macrovision.com/selfservice/viewContent.do?externalId=Q108464&sliceId=1

  Best regards

• TOSHIBA Power Saver - fatal error OX50

  Hello

  Recently, I have a big problem, my Toshiba power saver.
  It triggers a fatal error OX50 and I tried reinstalling several times and it doesn't work.
  Please how can help me solve this problem?

  Hello

  Fatal error with Power Saver hmm I read a few threads on similar problems and it does seem that the completely OS restore Toshiba recovery CD could help settle the energy saver

  But may I ask if you install all the drivers in the correct order?
  Usually the installation instructions are always placed on the page of the Toshiba driver and it s necessary to follow this guideline.

• Portege S100: How to restore the system TOSHIBA Power Saver setting

  When I had to test my battery and created a new setting of power on my laptop, I accidentally deleted the default schema TOSHIBA Power Saver of my those listed on my utility on Control Panel Power Options.

  I tried to restore the Toshiba utility, by recreating a power scheme called "TOSHIBA Power Saver" - but Power Options says that there is already a framework plan of the same name.

  When I start the laptop, I get an error message saying that the TOSHIBA Power Saver utility has experienced a fatal problem and he has completed the program.

  Can anyone advise me on what I do:

  -restore default TOSHIBA Power Saver setting.
  -stop the runtime error occur
  -put things the way they were back.

  Thank you very much

  Seems so ;(
  I would recommend the recovery CD because the whole procedure takes about 10 minutes only.

  But don't forget to save your data if it's important.

• Vista 32 bit Toshiba Power Saver does not work - Satellite L300 PSLB0E

  I have problem with Toshiba power saver - it does not work.
  I have not found a driver for Vista 32 bit here.

  Toshiba Satellite L300 PSLB0E-04R012RU VISTA HOME PREMIUM

  Thanks for your help

  Hello

  What do you mean with it does not work?
  What energy savings you used?

  The Vista operating system uses clean power options and there is no special Toshiba Power saver for Vista as for Win XP

  Maybe you tried to install the saver of energy for Win XP?

• P30: I need a 32-bit version of toshiba power saver Setup

  Hello

  I need a 32-bit version of the installer of toshiba power saver for the P30 please, I hope that it is possible :)

  Thanks in advance :)

  Sincerely, James.

  Post edited by: jamespic

  Hello

  I put t know why you need a gain of power in particular but I found a Power Saver for Win XP on Toshiba website. I think it's running at 32 bits.
  See the page:
  http://EU.computers.Toshiba-Europe.com/cgi-bin/ToshibaCSG/download_drivers_bios.jsp?service=EU

• Satellite C850-1E7 - need Toshiba Power Saver for Windows 8 64 x

  Where can I download Toshiba Power Saver for Windows 8 x 64?

  Hello

  C850-1E7 satellite was already pre-installed with Win 8.
  All Toshiba drivers and tools must be preinstalled too so I t understand your request because the energy saver

  However, Windows Notepad 8 preinstalled don t contain the value added package plus this package was for Win Vista and Win 7 and Win 8 upgrade, but there is no PPV for units that are already pre-installed with Win 8.

• Re: Toshiba Power Saver and administrative rights

  I have set up another user with administrative rights but cannot access toshiba power saver to change settings.
  I have to open a session as long as the original user to change anything either.

  Help

  Hello

  As far as I know the admin can only change the settings to save energy and can assign and configure power profiles.
  The user then, else can not change. It is not possible

  Greetings

• Utility TOSHIBA Power Saver for Satellite L40 - 17R

  Hi all...

  Firstly, thank you for the answer to my previous question, which got much help. I have another question. I had a laptop Tecra A4 before that ships with Toshiba Power Saver utility that can control the brightness and the different profiles of power for Windows. I now L40 - 17R computer laptop, which I cannot find the same utility for?

  Can someone tell me if there is a tool for the management of power supply for model L40 - 17R profiles, and where can I download it?

  Hello

  As you know for Toshiba WXP gave Toshiba Power Saver utility, but for Vista, this tool does not exist in the same format. Many functions now is in the Vista power settings. Utility TOSHIBA Power Saver is also there but just with several options.

  You can find it if you open the power options > change plan settings > change advanced power settings. You will find Toshiba Power Saver Settings V8.02.00.

  Good bye

• TOSHIBA Power Saver for Qosmio F50?

  I am owner of a Qosmio F50-108 and I can't seem to find Power Saver utility from TOSHIBA.

  What is the same thing that the utility options of power on the control panel? I've seen screenshots of power saver utility from Toshiba which is supposed to be delivered pre-installed on their laptops, but the one I saw was on a Qosmio G10.

  The series F50 there as well? If Yes, where can I find it?

  Hello!

  As far as I know that the Qosmio F50 comes with Windows Vista and not XP.

  TOSHIBA Power Saver is only available for Windows XP because Vista has the same functions as energy savings. The energy saving features are now an integral part of Vista.

  I've created an interesting article here in the forum for you:
  http://forums.computers.Toshiba-Europe.com/forums//thread.jspa?MessageID=142522

  Good bye

• TOSHIBA Power Saver replaceable by SpeedSwitchXP?

  Hi people,

  as I've seen here in the forums a lot of users of Toshiba laptops has the problem of a noisy and often fan running. The Toshiba Power Saver 1.27.2.1 installed on my satellite M30X-167 seems to not have the feature of switching on the CPU to load dynamic processor.

  There SpeedswitchXP - CPU frequency for mobile control Windows XP on http://www.diefer.de/speedswitchxp/index.html

  Does anyone of you have a positive experience with the help of other register controls as the original from Toshiba?
  Doing dynamic CPU speed control significantly reduced the activities of fan?

  Best regards and greetings from the Germany
  Joerg

  Hi Joerg

  I had already installed on my Tecra M1. It worked fine, but I n t notice a big difference. Can you please tell me what laptop do you have?

  In my opinion, you can try to install it. On my unit SpeedSwitch works properly without any problem, but AFAIK the tools as it works well on laptop computer desktop map mother don t allow this tool may have information on the temperature or things like that.

  As I said you can try it.

• TOSHIBA Power Saver - SP6000 question

  Hello

  I recently had to reinstall the Toshiba Power Saver on my SP6000 utility. Since then, I can't find any possibility to change the method of 'cooling' ('optimized battery', 'performance' etc.).

  Can I have EVER had, so I could be talking nonsense here :-) It's just that I seem to remember having this option before. I'm trying to force my laptop shorten the CPU rather than keeping the cooling fan marketing every few minutes, and I thought that was possible using the method of "cooling".

  Any help would be appreciated.

  See you soon!

  Hi, Jerry

  First of all, I hope that you have installed the appropriate for your model energy saver. ;)

  Launch the energy saver and Power Save Modes tab there is an option called FULL POWER subsector first. It must be marked, and then click details. At full power, properties select tab power saving Mode and there is option method of cooling. On this site, you can choose between three options:

  -Maximum performance
  -Performance and
  -Battery optimized

  I hope this little description to help you.

  Good bye

• How to make Toshiba Power Saver working in Vista?

  Hello...
  Is there a way to make toshiba power saver works on vista?

  If not, is there any other 3rd party program that does the same thing? Or y at - it news that toshiba is developing this program for vista?

  thanx

  Hello

  you will laugh, but do you know who developed the powersaver for vista?
  It's toshiba (Yes :)), and all functions are adapted from current saver original toshiba XP. If you don't need to download anything, because all functions are already supported. :)

  So, just the question why do you ask? ;)

  Welcome them

• Receive the error message when you try to install Toshiba Power Saver

  Toshiba power saver recently stopped working - I deleted and it redownloaded this site, now whenever I try to start the installation, I get a message "Cannot be the computer id" and stops the installation.

  For the first time post here so if I'm on the wrong forum or you need nothing else apologies in advance.

  Hello

  where you´ve have downloaded the powersaver? Maybe you downloaded a bad for your machine. It s absolutely important to download EXACTLY this software that fits your type of machine.
  When you download stuff on toshiba Web sites you will have to keep an eye on the version on your machine (for example the Satellite A100 - 552-> download software of type '552' of the Satellite A100 series).

  Sometimes, this solves a lot of mistakes and clarify some not very nice situations.
  Please, more details on your problem. :)

  Welcome them