Toshiba Tecra 9000 noise

Similar Questions

• Tecra 9000 - BIOS block 1 damaged

  I have a Tecra 9000 with a broken BIOS.

  I looked at upgrading the BIOS FAQ [1] and searched the forum (found [2]). However, I have no Windows installation and at least my Toshiba Tecra 9000 doesn't have a floppy drive, so I can't follow the procedure described here.

  You will find my update of the BIOS for the laptop with the serial number 32222375G: http://de.computers.toshiba-europe.com/innovation/jsp/supportMyProduct.do?service=DE&userAction=SMP_RESU LTS_PAGE & partNumber = PT900E-08YZG-GR & serialNumber = 32222375 G & USER_ACTION = Serial % 20num ber

  So, what should I do?

  BTW: I can't real poster on this forum. I can't post the exact BIOS error message because the forum software claims that I used profanity. The relevant part is contained in the subject line of the thread.

  [1] [http://eu.computers.toshiba-europe.com/innovation/faq.jsp?FID=TRO0000000b07 |] http://EU.computers.Toshiba-Europe.com/innovation/FAQ.jsp?FID=TRO0000000b07]
  [2] [http://forums.computers.toshiba-europe.com/forums/thread.jspa?threadID=46581&tstart=0 | http://forums.computers.toshiba-europe.com/forums/thread.jspa?threadID=46581&tstart=0]

  Hi uAyjYdKT,

  Download a version on diskette in the bios called "trad.
  -You can always start your machine?
  -You can install anything on hard drive?

  If both answers are Yes, follow these steps:
  -do a back on your hard drive installation (this can be done on another machine)
  -unzip / uncompress the bios disk do a hard drive
  -Insert the hard drive of your machine and run the bios update

  If the responses were not: see one servicepartner to have made

• How to change minPCI WLan on Tecra 9000

  Hello

  I have a Toshiba Tecra 9000 with 11b wireless.
  I bought a minPCI 54g card, but I don't see where is the mini on the Tecra 9000 pci card,

  My question is how do I change the WiFi card mini pci please?

  Thank you all

  Hello

  I think that if you can't find the WLan slot at the bottom of the unit, then it must be hidden somewhere under the keyboard!

  The keyboard is usually fixed with two screws that are hidden under a thin plastic above the F1 - F12 buttons cover.
  If you remove the two screws, you should be able to loft the keyboard.

  But be careful; It s to connect to the motherboard with a flat cable

• Tecra 9000 - left speaker does not work

  Hello

  the left speaker of my Toshiba Tecra 9000 no longer works.
  Strangely, the right one still works perfectly.

  As far as I can tell this is not a problem concerning the links between the speaker and the motherboard.
  I disassembled the laptop to check if the connection and firmly plugged it.

  Any ideas what the problem may be?

  Thank you.

  Hello Peter

  As I see that you started several threads with different themes on your old Tecra 9000. I don't know where the condition is your Tecra but according to your assignment, you have disassembled the laptop integer. Have you taken some disassembly instructions or you did at your peril?

  What about the speaker? Check all sound settings or player settings you use. Maybe left speaker off ot the sound is set to the right speaker only. If nothing is done it is possible that left speaker is defective. Tecra 9000 is old enough for laptop and everything is possible.

• Tecra 9000 display driver

  Hello

  I recently acquired a Toshiba Tecra 9000. I added a new 40 GB hard drive and installed Windows XP. The standard display driver does not allow me to connect an external monitor to extend my Windows desktop on 2 screens, so I downloaded the latest driver on this site. However, when I try to install the driver (S3 Graphics SuperSavage/IXC 1179) a hardware setup error appears saying this driver has not passed Windows Logo testing to verify the compatibility with XP. There is no other driver to select on the Toshiba site, so I installed the driver. At first, everything seemed ok, but today my laptop has projected Blue 6 times within the last hour. I've now uninstalled the driver and have not had any problems. However, because I have everything installed display drivers display is basic at best.

  No one else has this problem with the display driver for a Tecra 9000 with XP? Or anyone knows other drivers compatible with my model?

  Thank you

  It's very strange! All the drivers on the Toshiba download page are the same as the CD Utility & Tools.
  Is your TECRA 9000 a European model?
  Try using the driver CD tools & utilities. On this way, you'll be sure to use a right.

• Update video controller (VGA Compatible) on Tecra 9000

  Recently, I bought a used Toshiba Tecra 9000.
  The computer has WIN XP SP2, and I would like to know how I can update (video controller/VGA Compatible).

  Thanks for your help

  Hello Isabelita

  Sorry, but I didn't understand your good ad. You wrote on a problem, but from your description, you just want to update the display driver. I'm wrong, or maybe I misunderstood something? I put t see any problem here.

  Good driver, you can find on the download page of Toshiba Tecra 9000 has® S3 SuperSavage/IXC video card. Install it and graphics card runs correctly.

  If you think that I misunderstood your ad please explain exactly what is the State of the graphics card in Device Manager, and you want to do exactly.

  Good bye

• Tecra 9000 running W2k - driver for the Audio controller problem!

  Help, please!

  I have a laptop Toshiba Tecra 9000 and recently discovered that the sound was no longer working. I'm not sure exactly when he first stopped working, but believe it was with MS Windows 2000 Updates or when cleaning PC after spyware attacks. While they inspected the real device (Yamaha AC - XG Audio Device), it has each if useful ""! "with a ' Code 10 - device cannot start", in the "Device status" screen
  I removed the device and allowed windows to detect & install, without success, then downloaded and tried many devices and generic drivers, drivers and
  even later as suggested on a Web of Toshiba site, I find
  http://EU.computers.Toshiba-Europe.com namely;

  Driver date: 22/05/2001 Version: 5.12.1.2138

  I'm at a complete loss as to why it has stopped working and what to try next to try and solve the problem. Any
  help or advice would be greatly appreciated.

  Concerning
  K

  Hello

  It is possible only after the installation of the MS Updates that the audio driver is blocked by a load of your system and no sound can be heard.

  If you want you can try to install this driver:
  http://drivers.Soft32.com/driver/download-Yamaha_AC_XG_Generic_Drivers_for_YMF753_743_752-24609.html

  It is useful after installing SP2. I don't know if this will help in your case, but you can try it.

  Good bye

• How can I reinstall on Tecra 9000 VGA card

  Hi I recently had to format my toshiba tecra 9000 hardrive.
  After that, I discovered that the graphic card was not installed.
  I'm guessing it uninstalled during the reformatting process.
  I found the driver I was looking on (http://eu.computers.toshiba-europe.com/cgi-bin/ToshibaCSG/download_drivers_bios.jsp?service=EU)
  but I have no idea on how to install it so I was wondering if someone can help me.

  Thank you very much

  Very simple;

  -Download the XP driver from the Toshiba page
  -Unzip the ZIP driver package
  -Go to Device Manager, select the graphics card and the update (the driver installation)
  -then choose the option install from list or specific location, then Don t find. I will choose the driver to install
  -Choose the driver downloaded and unzipped file
  -to complete the installation and restart the laptop

  Enjoy

  By the way; check out your first assignment on the same topic!
  http://forums.computers.Toshiba-Europe.com/forums/thread.jspa?threadID=25914

• Tecra 9000 upgrade question!

  Hello my name is tom and I have a toshiba tecra 9000.
  My problem is that the original toshiba 20 GB hdd is vice
  and I want to buy a new toshiba HARD drive.
  My question is:
  Gigabyte how can I install it on my laptop?
  I want to buy a 40 GB, 60 or 80 GB HARD drive
  is one of this size HARD drive compatible with my toshiba tecra 9000?

  EDIT:
  I forgot:
  The laptop has:
  1000 MHZ
  512 MB of Ram
  standard 20 GB HARD drive
  WLAN to edge (default external PCMCIA netgear Wlancard)
  16 MB S3 Graphics card
  14.1 "display

  Thanks in advance for answers

  Thanks apco. Great info! :) You have to test it on your Tecra? I hope that you did not notice any problems here.

• Tecra 9000 wireless (WPA)

  I try to get a Toshiba Tecra 9000 working on our network has just changed from WEP to WPA Wireless. Is there an updated driver, etc. for this?

  Hello

  Well, your ad is a bit confusing to me.
  Encoding methods if I know the WEP (Wired Equivalent Privacy) and WPA (Wireless Protected Access) are different. In this case you don t have no driver to install. The WEP key is a method of watching as WPA because WEP used 128 bit and WPA 48 bit coding.

  Good bye

• Tecra 9000 - Download the software for new installation

  Hi there;

  I lost the disc for my Toshiba Tecra 9000 laptop.

  Exactly what software needs to be downloaded to the default configuration for one of these?

  Thank you very much

  Hello

  What 9000 model do you have?

  All the required drivers and utilities are available for download on the web, but if you mean you want to put the machine in its factory condition, you need the recovery disc that came with the machine.

  If you provide the machine part number I can let you know what software has been bundled with it.

  Kind regards

  Nick

• Wireless with Tecra 9000 does not work

  Hi, I have a toshiba tecra 9000, in the last weeks that I had problems with my windows xp, so I decided to install win 2000.

  2000 is more stable, but I had a problem with the wireless card... I installed the latest drivers downloaded from the toshiba Web site... wireless card is installed successfully, but when I run the client Manager there is no way to find my access point...

  I have no signal and cannot find any network... can you help me?
  Thank you

  The laptop is connected to the access point with the installed XP?

  First, please be sure that your card wireless network has been activated on the laptop in the right way.
  The switch on the side of the laptop and the FN + F8 should be used to activate the wireless card.

  Does AP support the same standard as minPCI installed wireless network card wireless. I mean A. B or G standard.
  The router and the card should support the same standard to pair properly

• Tecra 9000: Agere minPCI wireless network card does not work

  Hello

  I can't get my Toshiba Tecra 9000 to work with the Agere wireless Mini-PCI card.
  The Wifi card is 100% working since I've tested in Tecra 9000 my friend.
  The drivers are properly installed.

  But when I switch the equipment on the side of books, the led remains dark. In addition, Agere MiniPCI Wlan Card is not displayed in the XP Control Panel.

  All solutions?

  Tanks.

  > the Agere MiniPCI Wlan Card is not displayed in the XP Control Panel.
  And what is with the Device Manager? The card is listed there?

• Sound problem with Tecra 9000 on Win XP SP2

  Hello!

  First! Excuse me for my English!

  I am trying to install a Tecra 9000 with Windows XP SP2. The problem is the noise. My XP does not recognize the sound card, I am trying to install the drivers, but the system answer me 'the driver was not installed' and I don't know how can do to his works.

  I read a few post on the forum, but I can't solve this problem.

  Could someone help me.
  Thank you!

  I think this doc Toshiba should help you:

  [Windows XP Service Pack 1 and 2 incompatible with existing Yamaha driver sound | http://askiris.toshiba.com/ToshibaSupportSite/search.do?cmd=displayKC&docType=kc&externalId=2772 91xml & sliceId = & dialogid = 54976777 & stateId = 0 0 52121258]

  There is a link to a driver that should help to address this problem.

• Tecra 9000: SD card reader does not work with XP

  I've made some progress on this issue, it seems that Cardbus devices cannot share IRQS, although the main problem is that FFDFB200-FFDFB3FF memory address is shared by the SD card controller and device memory SD card. Unless we find a way to edit the registry to resolve this conflict of memory, the simple answer is that the SD card reader does not work under XP.

  I think that it would take a major surgery of the register or re-writing of drivers to move the address of memory used by the SD card device, I always work on this for now.

  Can someone support Toshiba or Toshiba Marketing explain to me why my Tecra T9100 has a "Designed for Windows XP and Windows 2000" sticker on it, when Toshiba does fully support XP on the 9000 series?

  David

  [Edited by: admin]

  Hi David

  Unfortunately, I n t think that you will find here a Toshiba marketing person or other departments. It is ONLY a user to user forum.

  What you say, it is simply NOT true.

  The Tecra 9000 was delivered with 3 different OS.
  It was delivered with Windows XP Pro, W2k and Win98. You can order all the images of this Toshiba home Toshiba service partner. That's why Tecra 9000 does support Windows XP!
  Tecra 9100 has been bundled with Windows XP and Windows 2000 and also supports Windows XP!

  Of course, there are different models with a different hardware configuration, but all supports Windows XP.

  I put t know why you get this error message or why you cannot use the SD card, but I guess you don t use the image of Toshiba. That's why you installed your operating system isn't properly. Because you are a newbie you don t know the Toshiba all the driver installation must be done in the right order and all Microsoft QFEs must be installed also.

  As you can see you must pay attention to many important things if you want to manually install the operating system.

  Good day