Toshiba Thrive AT100 does not complete the update

Similar Questions

• I've updated my macbookpro (2010) snow leopard at elcapitan but when I restart it does not complete the installation then is no longer able to use it. Help?

  I've updated my macbookpro (2010) snow leopard at elcapitan but when I restart it does not complete the installation then is no longer able to use it.

  I tried the following:

  1 start with the R command and using disk utility that did say he had problems but then appear all ok after completing.

  2 tried the Verbose mode and did not work

  3. I tried command mode S did not.

  4. tried to zap the pram was not working.

  5 a couple other things that I had read, but nothing helped.

  It starts up and the line begins to show the computer made his 'thing', but gets stuck about 3/4 quarters of and goes no further. Would appreciate any suggestions.

  PS: also tried boot from the original disks as well, but no luck.

  You said "PS: also starting from the original disks tried both but no luck."

  Exactly what happened when you tried?

  Have you tried formatting the HD?

  Have you started the installation of SL?

• My Vista system trying to download the updates, and it does not complete the download. It is up to "Windowsupdate_00000646" and "windowsupdate_dt000" How do I clear this code to receive these updates?

  My Vista system trying to download the updates, and it does not complete the download. It is up to "Windowsupdate_00000646" and "windowsupdate_dt000" How do I clear this code to receive these updates?

  They are only updated office or all updates?

  For Office updates, usually to pick up the item at the: http://www.microsoft.com/downloads/en/default.aspx

  then manually download and install the same.

  If all updates, perhaps consider the following general tips-

  Option: File of Windows Update agent wups2.dll is incorrectly registered and the registry associated with the Wups2.dll file files are missing.

  Method 1: Save the Windows Update files

  1. Click Start and type notepad in the box start the search.
  2. click on Notepad in the list programs.
  3. copy the following commands, and then paste them into the opened Notepad window:
  REGSVR32 WUPS2. DLL/S
  REGSVR32 STINKS. DLL/S
  REGSVR32 WUAUENG. DLL/S
  REGSVR32 WUAPI. DLL/S
  REGSVR32 WUCLTUX. DLL/S
  REGSVR32 WUWEBV. DLL/S
  REGSVR32 JSCRIPT. DLL/S
  REGSVR32 MSXML3. DLL/S
  4. in Notepad, on the file menu, click Save as.
  5. in the file type list, click all files.
  6. in the file name box, type register.bat.
  7. save the Register.bat file to your desktop.
  8 right-click the Register.bat file, and then click Run as administrator. If you are prompted for an administrator password or a confirmation, type the password or click on continue.
  9. try to reinstall updates.

  http://support.Microsoft.com/kb/958053
  See: method 1: save the Windows Update files

  http://support.Microsoft.com/kb/326253
  Method 5: Registry Windows Update engine files

  http://support.Microsoft.com/kb/971058
  How to reset the Windows Update components?

  Method 2: Download and install Windows Update agent

  Windows Update Agent

  How to get the latest version of the Windows Update Agent to help manage updates on a computer
  http://support.Microsoft.com/kb/949104

  Information for network administrators about how to obtain the latest Windows Update Agent
  http://support.Microsoft.com/kb/946928

  Click Start, click run, click Browse, navigate to the file you saved and click Open.

  Add the switch /wuforce at the end of the command run and then click OK. For example, the command run might look like this: "C:\WindowsUpdateAgent30-x86.exe" /wuforce

  Click run.

  Follow the steps to complete the wizard.

  Important

  To reinstall Windows Update Agent - download the relevant file from one of the links provided above and save it to a drive where Vista is not loaded because the file cannot be launched directly from the root directory of the system.

  Click Start, run, type: "D:\WindowsUpdateAgent30-x86.exe /wuforce" (without the quotes) and press ENTER to install the Windows Update engine.

  Note: There is a space between "D:\WindowsUpdateAgent30-x86.exe" and "/ wuforce.

  D: is the drive where Windows is not installed (IE a flash drive or a 2nd hard drive etc.)

  TaurArian [MVP] 2005-2010 - Update Services

• update of sql server 2005 service pack 3 error code 6D9E Windows update security does not accept the update

  update of sql server 2005 service pack 3 error code 6D9E Windows update security does not accept the update

  Hey lasdj,

  Thanks for posting in the Microsoft answers site!

  If you receive Windows Update error 6d9e while installing SQL Server 2005 Service Pack 3 by using Windows Update, it means that the installation folders and directories are compressed or encrypted.

  To fix this problem, make sure the folder locations where you are installing the service pack to aren't compressed or encrypted, or specify a different folder and then run Windows Update again.

  Therefore, remove the compression of the DATA directory and run together to the top again.

  Remove compression from the C:\Program Files\Microsoft SQL Server folder and see if you are able to install the updates without any problem.

  See the links below for more details:
  
  Windows Update error 6d9e
  http://Windows.Microsoft.com/en-IE/Windows-Vista/Windows-Update-error-6D9E 

  Install SQL Server 2005 and 2008 failures (compressed DATA directory)
  http://blogs.msdn.com/psssql/archive/2009/02/24/SQL-Server-2005-and-2008-Setup-failures-compressed-data-directory.aspx

  I hope this helps!
  Gokul T - Microsoft Support

• I tried to run the IE8 downloaded from Microsoft and I got this message: "the version of IE you have installed does not match the update you are trying to install." error no. KB2618444

  I just got my SP3 for my XP machine, I tried to start the download of Microsoft ie8 and I got this message:

  "The version of IE you have installed does not match the update you are trying to install." error no. KB2618444

  I'd appreciate any help that I couldn't solve this problem!

  Thank you!

  E-mail address is removed from the privacy *.

  Original title: error KB2618444setup

  I do not understand your question. Download IE8? Do you mean the installer for IE8? It's here.

  You try to install KB2618444? They make 3. For IE6, IE7, and IE8. You probably download one from a different version of Internet Explorer you have...
  I'm going to guess you really want that for IE8.
  That's it: IE8-WindowsXP-KB2618444 - x 86 - ENU.exe

• Read aloud Plugin does not during the updating of the Acrobat version 11 XI XI Acrobat version 11.0.12

  Read aloud the Plugin does not during the updating of the Acrobat version 11 XI XI Acrobat version 11.0.12.

  I uninstalled and reinstalled and it worked very well. But when the update to Acrobat, it disappears and can not be used. Need a new patch to update to Adobe.

  Hi Lonnie,

  The function Read Out Loud on Mac in Acrobat has been deprecated and removed.

  This feature is now is no longer available.

  Kind regards
  Rave

• MacBook Pro not completing the update after reboot

  Hello!

  I have need help and need some advice. It has been more than 3 months now that this has not been resolved. My Macbook Pro will not perform updates on the App Store after the reboot. I restarted to complete the update, but the message keeps popping up that I need to do the same thing. The software update that needs to be updated is Mac EFI Security Update 2015-001 1.0. I have a Macbook Pro 2012 OS X Lion Mountain 10.8.5. Help, please!

  the message keeps popping up that I need to do the same thing.

  Whence this message pop up?

  Update App Store problems See Linc Davis response.

  Go to the  menu with the option/alt key is pressed and select the first item. Then, go to the software/facilities the report part and see if the update is listed as installed.

• Error in partition Acer Iconia B1 does not accept the update.

  My new Acer iconia b1 - a71 16 GB does not accept the OTA update in the system start menu! He accepts, and download the update. After that is give me to reboot and install. And after - installation under the start menu in the system stops

  ERROR:-invalid partition setting
  17: 238e8000:888e8000 of fat
  Instalation aborted.

  The Tablet is clean and the. I tested it without SD card inside. I even try with the original OS rom in the Acer support site - and still the same error! Can anyone describe it is hardware problem to return to the supplayer or how to fix this problem?
  Can you help me?

  A hotfix is available to resolve the error of invalid Partition. In addition, we have created a few video tutorials that will help guide you through the installation of the patch.

  Download the patch

  Iconia B1 - A71, install the USB 2.0 driver - video tutorial

  Iconia B1 - A71 error invalid when updating Android (FAST) partition - video tutorial

  Iconia B1 - A71 error invalid when updating Android (FULL) partition - video tutorial

• My computer will not complete the update

  I've updated my computer tonight and after the reboot. Until I can connect the "configuration of updates: stage 3 of 3" came, as usual, but this time he remained at 0% for a few seconds and then the computer restarted again. It always restarted it self shot 10 times until I forced to close. Cannot start without failure or something.

  
  

  What should I do?

  Restore point:

  Try typing F8 at startup and in the list of Boot selections, select Mode safe using ARROW top to go there > and then press ENTER.

  Try a restore of the system once, to choose a Restore Point prior to your problem...

  Click Start > programs > Accessories > system tools > system restore > choose another time > next > etc.

  ~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~

   

  If restore work not and you do not have a Vista DVD from Microsoft, do a repair disc to do a Startup Repair:

  Download the ISO on the link provided and make a record of repair time it starts.

  Go to your Bios/Setup, or the Boot Menu at startup and change the Boot order to make the DVD/CD drive 1st in the boot order, then reboot with the disk in the drive.

  At the startup/power on you should see at the bottom of the screen either F2 or DELETE, go to Setup/Bios or F12 for the Boot Menu.

  When you have changed that, insert the Bootable disk you did in the drive and reboot.

  http://www.bleepingcomputer.com/tutorials/tutorial148.html

  Link above shows what the process looks like and a manual, it load the repair options.

  NeoSmart containing the content of the Windows Vista DVD 'Recovery Centre', as we refer to him. It cannot be used to install or reinstall Windows Vista, and is just a Windows PE interface to recovering your PC. Technically, we could re-create this installation with downloadable media media freely from Microsoft (namely the Microsoft WAIK, several gigabyte download); but it is pretty darn decent of Microsoft to present Windows users who might not be able to create such a thing on their own.

  Read all the info on the website on how to create and use it.

  http://NeoSmart.net/blog/2008/Windows-Vista-recovery-disc-download/

  ISO Burner: http://www.snapfiles.com/get/active-isoburner.html

  It's a very good Vista startup repair disk.

  You can do a system restart tool, system, etc it restore.

  It is NOT a disc of resettlement.

  And the 32-bit is what normally comes on a computer, unless 64-bit.

  ~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~

  If above does not solve the problem:
  

  Windows Update Forum:

  It comes with Vista, upgrade install and activate Forum.

  You will get the best help for any problem of Update/Service Pack in the Windows Update Forum; the link below:

  http://social.answers.Microsoft.com/forums/en-us/vistawu/threads

  When you repost here, kindly include the Error Codes, and exactly what is happening when you try to update.

  In this way, you will receive the best help.

  See you soon.

  Mick Murphy - Microsoft partner

• CC does not show the update of Lightroom 2015.6

  Hello

  MAC OSX 10.10.5 and I always have problems with the creative application of cloud.

  It does not start automatically, but it works. Many updates lately omitted by error 43 or something :-) to 9%.

  But now the App does neither show the update of Lightroom for my Canon 1DX Mk2 files.

  I connect to the computer.

  Tried a patch on the blog of the Queen for a direct download of Lightroom, but does not.

  What could I do now?

  DIRK best

  Update of Lightroom

• Does not download the updates of Windows

  My computer will not download the updates of windows. For some reason, it considers that it is not connected to the internet. I installed a new virus program last night and it will not download updates for it to be.

  My computer will not download the updates of windows. For some reason, it considers that it is not connected to the internet. I installed a new virus program last night and it will not download updates for it to be.

  was the virus prog, a virus? There are a few out there.

  Delete/remove virus prog and try again.

• Satellite P50-B-103 - Cyberlink Powerdvd does not install the update from Toshiba

  So I have an update for my toshiba Satellite P50B-103 for "cyberlink powerdvd" and it does not install, just to unpack and does nothing.

  I left the laptop to operate for about an hour to see if anything installed but it does not, what to do?

  Are you talking about the video player updated v 6.1.2.1 - A available on the Toshiba UE driver page?

  It is an update and requires the Player preinstalled (full version).

  After downloading, you will need to unzip the package (vidpl-20140813100353)
  Then, in the vidpl-20140813100353 package, you will find the TC30704300A.exe file.
  It is also a zipped folder. Right click on TC30704300A.exe and extract the files.
  After that, you will get the TC30704300A containing various additional files where you can start the update process.

• My vesta does not detect the updates window

  Hello

  My stopped vesta of the window update detection< when="" i="" ask="" for="" window="" update="" it="" keeps="" running="" forever="" without="" finding="" new="">

  Hi AymanTakieddin:

  Many of SP2 for Vista and Win 7 SP1 users currently have the same problem.  If you leave Windows Update running for several hours and do not see an error message if you think that "check for updates..." will be finally executed completion and the report that the updates are available for download.

  If this does not help, see the step-by-step instructions posted on 16 June 2016 wire m #l's updates does not, he has been looking for updates for hours.

  These instructions are based on the instructions on the page Web of Dalai Search for Windows Updates takes forever?-a possible solution http://wu.krelay.de/en/ and take you through the process of finding a Windows kernel-mode driver (Win32K.sys) updates currently absent from your system, download the standalone update packages (.msu file) from the Microsoft Download Center and pre installation of these missing updates (in order from oldest to the most recent) before running Windows Update in order to install your remaining updates.  This work around usually decreases "checking for updates..." a few hours to ~ 20 min.

  If you have completely connected from may 2016 there should be only a lack Win32K.sys update - KB3161664 - you must install before running Windows Update to install remaining this month dozen or so June 2016 Patch updates Tuesday.

  ------------
  32 bit Vista Home Premium SP2 * Firefox v47.0 * IE9 * NIS v21.7.0.11
  HP Pavilion dv6835ca Intel Core2Duo T5550 1.83 GHz, 3 GB RAM, NVIDIA GeForce 8400 M GS

• Does not complete the Installation BIOS.

  Hi all

  IM using a HP DV6 - 7028TX, product number: B3K22PA #ABG and im having a problem with the installation of the most recent BIOS.

  Currently I have the f.2bs bios version and the more recent available is F.2D REV.

  So my question is when I run the update through HP support assistant function, it works very well and insydeflash said his copied succsessfully and requires a reboot.  To restart the shows "Press DELETE to enter setup", then a white screen and it remains on this white screen indefinitely. Then by pressing the power button, I restart the laptop and it starts fine.

  I tried to download only the bios package from the hp website and run as administrator, but as on the reboot I just get the blank screen again and no reply.

  Any advice on how to complete this update would be greatly helpful.

  See you soon

  Vanguard

  Hi Erico and all,

  I finally managed to install the latest update of the bios and it is what has been done.

  I tried to install all updates UEFI starting at one and for some reason any my UEFI will not be updated and so my Bios of installation could not be completed. So after an hour of fiddling around I deleted the Partition of 'HP_TOOLS' and started to update the bios, choose 'no' when asked to put a partition.

  The Bios has been flashed, computer restared and Voila! New Bios is installed.

  Thanks for your help!

  See you soon

  Vanguard

• Microsoft Update does not check the updates of VS2010 under XP SP3

  Updates of VS2010, or updates from Microsoft Update, can't find SP1 for VS2010, same if it should.

  This problem has been reproduced by Alexander Sun [MSFT] MSDN Community Support; its results can be found here http://social.msdn.microsoft.com/Forums/en-US/vssetup/thread/ac3a20c1-48f4-42fd-bda0-392f17e4753c/.

  He suggested I ask in this forum.

  
  How to obtain Visual Studio 2010 SP1
  
  For Visual Studio 2010 SP1, see the following Microsoft Web site:
       Microsoft Visual Studio 2010 Service Pack 1
  
  Source: http://support.microsoft.com/kb/983509 (last revision: April 18, 2011)

  Note that the page above (currently) does not state that VS2010 SP1 is available through Windows Update.