Total column eliminations in Studio Reporting

Similar Questions

• Unable to see the new column value in OBIEE11g report

  Hi all
  
  
  I'm totally new to OBIEE 11 g. I worked in OBIEE 10 g, but I am facing problem in 11g.
  
  Description of the problem: I created a report using the analysis. I saved and attached to a dashboard. I wanted to add another column in the existing report. TO do this, I modified the report and saved as well. Report is in a table view. But the problem here is that the newly added column is not displaying in the dashboard report.
  
  SO please let me know is there any scheme or any other configuration is required for the good report.
  
  
  Thanks in advance.
  
  Niraj

  If you work with 11.1.1.5, it's a bug (it is fixed at 11.1.16). If you add a column after viewing once the results, this column will be added to the secion excluded a view. Go to the edit view and then move the column to the included secion.

  It will be useful.

  Kind regards
  Kalyan Chukkapalli
  http://123obi.com

• Marking of columns in a "BOLD" report for the highest value dynamically

  4.2.1

  THM:2

  Hello world

  I have a sql report that has two values as production_cost, sales_cost. Depending on which is higher, I need to mark is as "BOLD" for each line. Is that what this is doable?

  for example

  If I have

  production_cost sales_cost

  1000 100 - this row 1000 Row1 must be in bold

  20 50 - in this row 50 row2 must be indicated in bold.

  Is it possible to dynamically?

  Thank you

  ryansun wrote:

  Hi Fac586 - for most

  "Draw attention to the value for utility purposes without any importance further and with no involvement of any other voice or mood?"

  It is, essentially, that the person could see immediately which is the higher of the two and make a decision on what to do with this file.

  So I have the query that is something like

  "Select apex_item.checkbox2(1,row1), production_cost, sales_cost from table".

  And then based on the values that it can move the lines or perform an operation. But this question related to the derivative of production_cost of sales_cost (or higher) of the two by making them "BOLD" ()

  Add 2 columns hidden in the report query:

  select
      apex_item.checkbox2(1,row1) checkbox
    , production_cost
    , sales_cost
    , case
        when production_cost > sales_cost then 'b'
        else 'span'
      end prod_tag
    , case
        when sales_cost > production_cost then 'b'
        else 'span'
      end sales_tag
  from
      table
  

  Use the properties of The HTML Expression columns PRODUCTION_COST and SALES_COST report to build the rendered element:

  <#PROD_TAG#>#PRODUCTION_COST#
  

  and

  <#SALES_TAG#>#SALES_COST#
  

• Calculate the sum of the 2 columns in the total column.

  Hello everyone.

  I have a question I hope you can help us

  I use the form of oracle 10 g , I made the table student FYI There are 5 columns ( HomeWorks, project, Midterm1, Midterm2,FinalExam), , I need to calculate these brands and put it in ( Total ) column using the form of the oracle. How to? .

  Another thing is it possible for me to restrict the user so that he can not enter more than 10 points for homework and not more than 15 points for project, etc.?

  I hope you can answer me I am really really really really grateful that I searched online, but no real solution especially for the second part of the question. will I change the varchar2 to the numbers?

  Thank you

  Yes... What you have to do is, you create when validating the element trigger on assignment, then put under code of the project

  IF (: blockname.itemname) > 20 THEN

  MESSAGE ("you must enter only less than 20 brands '");

  RAISE FORM_TRIGGER_FAILURE;

  END IF;

  Make the total, rank as a display element. Create a button contained within this block and put the code below in this WHEN the BUTTOM PRESSED trigger

  DECLARE

  v_total NUMBER;

  BEGIN

  v_total: =: Blockname. Mid1 +: Blockname. MID2 +: blockname.assignment +: Blockname. Final +: Blockname. Project;

  : blockname.total: = v_total;

  : blockname.grade: = CASE WHEN v_total<60   then ="">

  WHEN v_total<65   then ="">

  WHEN v_total<70   then ="">

  WHEN v_total<75   then ="">

  WHEN v_total<80   then ="">

  WHEN v_total<85   then ="">

  WHEN v_total<90   then ="">

  WHEN v_total<95   then ="">

  WHEN v_total<=100 then="">

  END;

  END;

• can a column of 'link' (classic) report trigger a dynamic action?

  In order to avoid a complete package and following flicker,

  can the link associated with a column of the classic report

  somehow trigger a dynamic action?

  Something along the lines of

  1. run few PL/SQL (some parameter passing along)
  2. refresh a page region to reflect the changes brought about by the (1)

  In practice, I have a page that emerges already, master/detail

  with the need to manage another set of detail records.

  I can collect a bunch of fields that are not related to the db.

  and generate an insert + update via a button 'Add '.

  Then the report containing the details is updated

  provide visual feedback that a new record has been added

  Indeed, with a column 'delete '. The integrated link is

  currently a javascript that saves the underlying m and

  Removes the secondary details, but it involves a shipment

  and refresh the entire page. It can be avoided?

  (running apex 4.2.1)

  You can use the onchage event to create your dynamic action. Make sure that there is a hidden page element (value not protected). From your link to classic report column, set the value of the page element hidden by using the JavaScript API $s () that will trigger the dynamic action of the onchange event.

  javascript:$s('P1_HIDDEN_PKEY_ID',#ROW_PKEY#);
  

  Thank you!

  JMcG

• How to increase the size of the column in the interactive report

  Hi, I use apex 4.2 and 25 theme...
  
  
  I found no option to increase the size of the column in the interactive report. When as usual report, I can do it,
  
  Please guide me to achieve.
  
  
  Thank you
  Nihar Narla

  Nihar Narla wrote:
  Hi, I use apex 4.2 and 25 theme...

  I found no option to increase the size of the column in the interactive report. When classic report, I can do

  This can be done using CSS. Create a rule like this in CSS Inline property page:

  .apexir_WORKSHEET_DATA td[headers="COLUMN_ALIAS"] {
    width: 10em;
  }
  

  where alias_de_colonne is the alias of the column in the report query and the width measurement, that's all you need.

• Referencing columns in an interactive report

  I need to bind an interactive interactive master report by their SUMMIT in a detailed report. Both reports have a common column name (PCN). To create a link from the main report to the detailed report, we must specify a 'name' in the "links" column for the column section in the main report. My question is: How do you reference a column in an interactive report, and therefore an entry can be provided in the 'Name' box in the section "links" column?
  
  I have developed a solution by creating a text element (P1_PCN) in the detailed report and using P1_PCN as 'name '. I then changed the source for the report to be: select... where CPN =: p1_pcn. However, what would we do if the community wants the feature click on a variety of values in column in the main report, for example filter the detailed report with a value of NCP or STHN or UIC, etc.? I rather think it was possible, but it would be very cludgy.
  
  Thank you

  Basically, you do it the right way.

  If you are sure that there is no column values that overlap, you can change the report detail something like query

  select . . .
  where (pcn = :p1_pcn
    or   sthn = :p1_pcn
    or   uic = :p1_pcn
  )
  

• Width of the column in the interactive report.

  How to set the column width in an interactive report?
  Someone please help
  
  
  Thank you
  Rik

  Visit this link...

  How to change the width of columns in an interactive report?

  Thank you
  Machaan

• Problem when adding new column on table with report form

  Hello
  
  I have a form on table (either emp) with report(select_empno,ename,job_from_emp).i have insert, update, delete operations on the table.
  
  Now I added a new column DOB for alteration report emp.i sql query to show the new column altered report.i insert process (Block anonymous plsql) to insert this column too all by creating a new row.but the problem is with update.i am not able to find how to upgrade this new column while doing the update to line level.
  
  pls let me know if you can give some ideas on this.
  
  
  Kind regards
  CK

  Well, sorry for sounding terse.

  I have a few questions.

  Have you added the item to the form page and associated with the database column?
  You use your own PL/SQL page process to update or do you use the 'row emp process' process produced auto?
  If it's your own please send the code with the word {noformat}

  {noformat} (with the curly brackets and in lower case) above and below it. Your code should be formatted like this once you've hit post message:
  

  BEGIN

  NULL;

  END;

  Cheers
  
  Ben                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                    
  

• How we get enough space for a column in the SQL report?

  How did one reserves enough spaces for a column in the SQL report?
  
  Ex: 2 columns defined as follows
  
  projectNo varchar2 (10)
  ProjectName varchar2 (50)
  
  When creating a sql, the report header report will show below. If my project name is 'Tire force Test site R987654'. I need to show in a single line, since it has been defined as varchar2 (50)

  projectNo     ProjectName
  A0001         Tire Strength
                Test At Site
                R987654 

  It have a way to get around here. Thanks in advance.
  
  Tai

  You can enter "space: nowrap;" in the CSS Style of the column, or, better yet, to set a CSS class to it.

  HTH,
  Chris

• How an apex_item.display_and_save total column

  I created a tabular presentation dynamically using apex_item.text. My query includes three columns; cash, cheque and credit. My last column in the query is a total column of cash, check and credit added together gives me the total for that line. My request;
  Apex_item.display_and_save(10,id) SELECT id,
  apex_item.display_and_save(11,transaction_date) transaction_date.
  apex_item. Silver Text(12,cash_amt,15,15),
  check the apex_item. Text(13,check_amt,15,15),
  apex_item. Text(14,credit_amt,15,15) credit,
  apex_item.display_and_save (15,
  (cash1_amt + cash2_amt + check_amt + credit_amt)) total
  Deposits
  
  In the form, if I change one of the amounts, is it possible to update the total column without having to submit the page (javascript maybe)?
  I don't know how to reference apex_application.g_fxx (i) in javascript, if that's even possible.
  
  Concerning
  Mark

  You are welcome!

  Thank you
  -Matt

• Maximum number of columns in the generic report

  What is the maximum number of columns in the generic report? I put it to 100, but the data that was displayed are always 60.
  
  Thank you.

  Hello

  It is 100.

  Oops, I thought it was, it seems, this maximum has been removed now - see here
  Maximum number of columns in the generic report

  See you soon

  Ben
  http://www.munkyben.WordPress.com
  Don't forget to mark the answers useful or correct ;)

  Published by: Munky on August 28, 2009 11:16

  Published by: Munky on August 28, 2009 11:17

• How to change the column ordering the interactive report?

  How to change the column ordering the interactive report?

  Hello

  Run the report as a developer, click on the "wonder wheel", click "Select columns" and reorder your columns in the box 'report '.
  Then click again on the "wonder wheel", click on save report and save the default state.

  Greetings,
  Roel
  http://roelhartman.blogspot.com/
  You can reward this response in marking it as useful or Correct ;-)

• How to avoid the total general of the classic report when the column break is installed in the Apex

  Hi all

  I develop application using Oracle Apex 4.2.0.

  I created the classic report Page.

  That I have summarized a column by selecting the check box check sum for the column.

  His shows the Grand Total.

  Then I chose the columns to break to the first column.

  His show the total groupwise and total as well as great as image below.

  

  My requirement is

  Need to hide total(Total:)) GroupWise or total general. I need to show any a total, not both.

  How to do this?

  Thank you

  Su.GI

  Su.GI wrote:

  Hi, thanks for your response.

  I use theme - productivity Application - issue 26

  -Standard model

  Report - report of Standart for classic report model.

  The above CSS code where I want to use in the page or report or model region.

  Specify a static region ID for the report area and put the following CSS rule in the CSS Inline property page:

  #static-region-id .uReportStandard tr:last-child td {
    display: none;
  }
  

  where static-region-id is the ID specified for the region.

• Sort to create the total columns to XLS/XLSX exported reports?

  I have a script which extracts VM information for several different clients and exports separate worksheets for each client to a single worksheet. The columns include CPU, memory, DiskGB, etc.. I'm trying to figure out if there is a way to add a line as the total of the values of specific columns in the report. I did a lot of research and did not have much luck. Any suggestions?

  Thank you

  Trevor

  Something like that?

  $report = @)

  Get - VM | %{

  $row = "| Select Name, NumCpu, memory

  $row. Name = $_. Name

  $row. NumCpu = $_. NumCpu

  $row. Memory = $_. MemoryMB

  $report += $row

  }

  $total = "| Select Name, NumCpu, memory

  $total. Name = "totals".

  $total. NumCpu = $report | Measure-object-property NumCpu-sum | Select sum - ExpandProperty

  $total. Memory = $report | Measure-object-property-memory-amount | Select sum - ExpandProperty

  $report += $total

  $report