TOTAL RAM: O

Similar Questions

• Aspire x1430g 4 GB total ram 1.5 GB available, what is happening here?

  I installed a Jaton PX620GT-EX in the hope of better play some games that I play. My experience has not gotten better. After some research, I find that the system has 2.5 GB of memory allocated to live at any time and only allows me to use 1.5 GB. I'm on Windows 7 Home premium. The video itself card has 2 GB DDR3. Any fix? Any ideas?

  Eventually solve this by closing the CPU and while pulling. (All = sticks of card and the video ram) Sprayed on the slots with compressed air, and also sprayed on the PCI-E. Everything put in and viola. Felt a little stupid after. It was easy to. All the Googling, I got to do with BIOS, and it takes just a cleaning...

• ESX using half of the total RAM after installation

  I just loaded ESX 3.5 Update 1 on a Dell R900 which has 128 GB of RAM installed.  After connection to the host (before adding virtual machines) 65 gb of RAM is already used by "system memory".  No idea why?  Charge same version of ESX on a Dell PE2950 with 32 GB of RAM and that's fine.

  Any help would be appreciated.

  on your host ESX in the VIC, go to the tab Configuration, advanced settings, vmkernel, start and uncheck VMkernel.Boot.force36BitMTRRMask

  reboot and that should do it.

• Turning to black screen after the value time/RAM used FireFox

  Hello

  My question is for the graphics. It lasts for several months now and he came to a point where it starts eating away at me.

  I installed recently (within 6 months) 16 GB of RAM and a new extra GPU. I upgraded to an ATI Radeon HD 5750 to a Gigabyte Radeon R9 x 270. I never had this problem with my 5750 card, so that initially led me to believe it was a card problem, until I discovered that my problem seems to be ONLY with FireFox.

  Now to the question: arriving to 2.8 GB + of memory used (according to Task Manager), FireFox flashes for a brief moment and to scroll the screen or between tabs, becomes completely black, forcing me to re - load the browser. Now the first question of the use of FireFox, so initially, amount of RAM is crazy, and I tried to lower the settings by disabling extensions, all sorts of things and the fulfillment of the only thing that is extend the time before flash made his boring appearance.

  The screen flashes problem seems to be quite something else. I tried to upgrade to the latest version of FireFox, run a new installation of FireFox, update my graphic drivers their latest versions, just about everything I can think of, and nothing seems to fix. What seems to be the problem here? I would be very happy all feedback and better understand how I can solve this problem outside hard using a different web browser.

  Hardware specifications:
  Motherboard ASUS P6X58D
  Intel Core i7 930 @2. 8 GHz processor
  22 GB of total RAM (3 branches of 2 and 2 strips of 8)
  Gigabyte Radeon R9 270 x GPU
  Brand/model unknown 850W of power (honestly, I'm just too lazy to remove the top of my tower which is packed in a locked drawer to figure out the make and model at display time)

  Running FireFox in safe mode seems to have solved or at least slow the excessive RAM issue however FireFox has now terrible performance much earlier. Adding constantly freezes and scripts constantly crashing, it would seem that addons and extensions that I ran helped to solve these issues.

  What I do now is to reload firefox standard and turn my extensions one by one to see which seems to be the cause of most of the points in the use of the ram.

  AdBlock Plus seems to so far be keep stable FireFox without problem. Going to turn in my next toolbar. Will edit this post more information after having observed the behavior of FireFox.

  Edit: The reason to believe it's my toolbar like with AdBlock plus, FireFox was still around or less 1 GB to use physical RAM. After the reactivation of my toolbar, I jumped up to 2 GB. Contact the developer of the toolbar soon.

• Firefox devouring 2 GIS of RAM, getting slow context menu

  Ive tried everything in firefox so far, but simply not working for me

  i disabled addons manually to see whats gobbling up so much ram but nothing, i upgraded, downgraded all the plugins and nothing either (the new flash plugin was giving me issues so now im on an older one btw, was still having issues with recent flash version so thats not it) i added addons that supposedly reduce ram usage but nothing
  

  I have enabled and disabled hardware acceleration but nothing either

  I deleted the cache and everything that firefox can clear except browsing history but nada

  I used speedfox to try and possibly difficulty this inconvenience, but nothing

  I've updated, downgraded and basically did everything possible with the drivers for my computer but nothing either

  Firefox is all designed to be like that and behave like an app which does not release its RAM after its used? in the Task Manager its show me anywhere between 1.2 GB of RAM used or more 2 GB! This is not normal, especially since I was only 4 light tabs open, all this and to add the context menu loading when I right-click is slow as molasses

  Please, please, can someone just help me out here? I've added a newspaper thing that could possibly help, idk whats even carried out more of that, one day firefox was large and using no more than 1 GB in total with more than 100 open tabs but now with 4 right after firefox was open for a long time his consuming a quarter of my total RAM for a browser that's a little crazy especially that in the days, I used to use Opera itd use not more than 800 MB at least

  Have you tried a new profile with extensions less?

  I do not expect a profile for "sour go" in 4 months, but many installed extensions (enabled or disabled) and how much others who were tried, found unfit and then uninstalled, who can understand what went wrong and why?
  
  Extensions uninstall cleanly, most or all of the preferences created are left after the extension is uninstalled. Who can or "clog" the prefs.js file, and can affect other extensions. With issues I personally had in the past, I save the profile before you install an extension that I've not used before or want to try. If this 'new' extension does meet my needs or causes problems with existing extensions, I wouldn't waste my time to uninstall this 'new' extension and then find maybe I ' fixin got more to do. " I just deleted this profile I just break off and drag the backup of this profile in place!

  Regarding the total number of extensions, I use several profiles who all my "28 basic extensions ' and then install the appropriate extensions for each of these profile for use on the internet.
  
  1 banking - security type extensions AND automatic erasure of the data of Firefox I started closing the browser (total 35 extensions) = launched by a keypad created using the Windows key, so that no one else using my PC won't even has a profile on this PC
  
  2 ' default' profile - used to advertise the default browser links - just the basic 28 extensions
  
  3. general surfing - a total of 55 extensions
  4. support - used on support forum and discussion websites - total of 49 extensions
  
  5 web development - used for the display of Web sites from the point of view of trying to understand why a Web site "does not work in Firefox, but done in Chrome / IE / Safari - extensions of 45 in total.
  

  See my next assignment for "advice", I'll probably max on this "response" where characters allowed.

  Ed

  Change, I've marked this as the thread solution. The real solution to the OP is in suite on wire/issues/979200. Apparently just disable two of the very many addons solves the problem. ~ J99

• The two RAM are inserted but only is recognized on Satellite Pro 4600

  Hello

  I have a Pro 4600 and two memory modules:
  1 IBM 128 MB PC100 CL2 SODIMM 144 pin
  2 Infineon 128 MB PC133 CL3 144 pin SODIMM

  Each of these modules work fine separately.
  When I put the two to reach 256 of ram, the system recognizes only 128MB, but boots ok anyway.

  My question is: what to do to have 256 total RAM?
  If the two models will be absolutely same (including manufacturer), it will cause correct 256 MB of ram?

  Hello

  Just FYI: If you want to use compatible modules please use PA3005U - 1 M 12 128 MB or 256 MB PA3069U - 1 M 25 memory module.

• Tecra 8100 does not work after upgrading RAM

  Hello
  I bought a kingston KTT-SO815/256 pc100 144 pin, did a 2.50.on of my Tecra 8100 BIOS update
  It still does not.
  In my BIOS total ram is ok, so the computer knows that it is in the slot B, but when I try to boot the computer to a blue screen appears necessary a bios update. (Already done) APCI is not good.
  Someone has an idea?
  Now there is in the slot A - 64 MB
  Tried to put 256 MB in the B slot
  them, that nothing worked changed

  Hello

  Well, the blue screen error message usually appears because of the failure of the software matter or material. In case you I guess, apparently because of the new RAM.

  The fact is that you can upgrade the memory to the maximum. 512 MB.
  These modules are compatible:
  PC100 256 MB (PA3051U-1NME)
  PC100 128 MB (PA3005U)
  PC100 64 MB (PA3004U)

  I recommend that you check you modules and try to use another compatible.

• Satellite A30 - RAM and overheating

  I have a Toshiba laptop but I'm not sure the exact model

  It says on the bottom SA30 - 203 years PSA30E - 00EU5-EN, he bought there is a little less than 2 years

  The reason for asking is that I want to improve the memory, because it is only 256 mb atm application to 224 MB!

  I have also some problems with it in this is very slow, it takes 5 minutes to start and I think it is overheating, as it regularly shuts down unless you hang the side fan a few inches on the desktop... Anyone have any ideas?

  [Edited by: admin August 24 05 18:50]

  Hello

  You will find a lot of discussions in this forum dealing with overheating and recommendations to correct the problem.

  The basic procedure is to remove the grilles of suction air of dust and debris. This can be done using a vacuum cleaner hose to vacuum debris, or by removing the CPU itself radiator and manually remove any build-up.

  Regarding the issue of the RAM, the SA30 use RAM shared for his graphics card, and this allocation will be deducted from the total RAM available in the BIOS. For a 256 MB RAM module, the proportion for the graphics card will be 32 MB that will leave 224 MB of memory for general use. It is this figure that signals the system.

  HTH

• Satellite C660 - Windows 7 64 bit BSOD after upgrade RAM

  Hi guys

  my laptop Specs: Satellite C660-1JG
  -Genuine Windows® 7 Home Premium 64-bit (pre-installed, Toshiba-HDD recovery)
  -Intel® Celeron® Processor T3500
  -2048 MB of RAM DDR3 (800 MHz).

  recently I increase my RAM to 4 GB (2 + 2 GB), since its installation, as soon windows7 64 bit beginning of loading, finished with BSOD. load BSOD Windows sometimes very well, but in a minute or two appears. I can confirm that it does not read the total RAM of 4 GB, I checked while the laptop was about 2 to 3 minutes ON. then I go out 1 RAM stick laptop is fine, no BSOD!

  so question raises if the RAM is at fault, incompatibility etc, but I have the dual boot OS and other OS is Ubuntu 11. who reads the 3.84 GB RAM and without crashing or BSOD or any question.

  Then I installed Windos 7 32 bit to see if that still has problems with 4 GB of RAM, but NO, 32 bit reads RAM 4 GB (usable 2.8 GB). without crashing or BSOD with 32, only problem with windows 64-bit version!
  I checked the specification it says Max RAM 4 GB Ram and yes it supports 4 GB RAM with Linux and win7 32-bit.

  I tried to update BIOS version 1.20 (currently on 1.40), but still got error: Firmware has no support of Flash (AFUWINGUI).
  I was wondering if any of you can guide me to the right direction.
  Thanks in advance
  Concerning

  I can't say for sure, but perhaps BSOD due to a compatibility issue.
  What RAM you bought as add-on (brand and specification)?

• Satellite L655 - 14 d - lots of RAM will be used

  Hi all what he

  I have a Satellite L655 - 14 d with 3 GB of RAM and 1 GB of dedicated video RAM problem in front, it's RAM exhausted even when the computer is left idle without any programs running in the back ground is about 65-70% of the total RAM is it normal to be like this? Help, please

  concerning
  jkjoms

  Hi jkjoms,

  It depends on your installed software stuff and the operating system

  If you use Windows 7 with a lot of software installed, they always start in the background, is it possible that over 50% of the RAM will be used.
  So it's hard to say if it of normal or not without knowing what stuff is installed, but in general this behavior is the only associated software and has nothing to do with the material.

  By the way: If you don't need some applications at startup, go to msconfig (start > run > msconfig) and disable all programs that you don't need.

• Tecra M10 - 10F and 8 GB of RAM

  Hello NG,.

  Today, I bought a Toshiba Tecra M10-10th with RAM 2 x 4 GB modules. When I enter the BIOS - it shows 8 GB of RAM. I installed Windows Server 2008 Enterprise 64-bit and after installation of the tab system properties shows 8 GB of RAM, but the Task Manager and all other parameters (for example the pagefile is also only 4 GB in size) said I have only 4 GB of RAM.
  I installed all the drivers and actual patches from the homepage Toshiba - Device Manager displays a device as it is not installed or is unknown.

  What's wrong? Something else has the same experience? Opportunities to work with 8 GB of RAM on Windows Server 2008 64 bit?

  Thanks in advance

  Regards Marc Grote

  Hello

  AFAIK Vista 64bits acknowledged the full RAM after the installation of SP1.
  I put t know how it works on Windows Server 2008, but perhaps you will need also this MS.

  By the way; Maybe the Manager of tasks no indication that the value of RAM that is used and not the total RAM that is inserted

  However try to install a tool like Everest Home edition of analysis of material and check if what RAM value has been reported.

• Upgrade RAM to HP pavilion 15-n209TX

  My HP Pavilion 15 n209tx book has 2 memory slots for RAM modules. A slot contain Hynix 4 GB 1600 MHz RAM. I want to update total RAM 12 GB. I'm of the India & amp; Consider purchasing 8GB DDR3L 1600 MHz SODIMM 12800, PC3L Non - ECC SDRAM 1.35v. I have a few doubts & amp; questions about the upgrade. Kindly enlighten me with proper guidance. < br > 1. First of all, is my choice of RAM card correct and appropriate for my laptop model? < br > 2. If I don't get same brand market HYNIX, y at - it no problem about buying another brand with the same features and installing it in the slot of memory in addition to RAM Hynix? < br > 3. What brand is best available in India? < br > 4. How will I know if my RAM preinstalled is single/dual channel (actually I don't know what it is intended)? < br > 5. My laptop product catalog/repair says that he accepts only 8 GB DDRL3 1600 MHz RAM SHARING if I intend to upgrade. That means that means & amp; should I specifically look for something while buying RAM from retail store? < br > < br > thank you in advance!

  I don't know all the market in India. When I say memory without a name, I mean literally nameless memory. It will be just the speed not stamped on any other identification. If you associate modules you lose operation dual channel which means that the memory can transfer 10-15% less information per cycle. While generally, more memory, the better, but it is also true that you want it to be faster. Very few computer users really need more than 8 GB. This is why most of the people would be better with 8 GB in dual channel 12 Concerts in single channel mode.

  This memory would work fine and would be functionally identical to the module you have:

  http://www.eBay.in/ITM/HP-4GB-DDR3L-1600-1-35V-SODIMM-H6Y75AA-uuf-/131174135449?PT=LH_DefaultDomain_203 & Hash = item1e8a967699 & _uhb = 1

• Pavilion p7 - 1436 s: send more video memory dedicated RAM?

  Hello!

  I have a Pavilion p7 - 1436, and a game I want to play requires a minimum of 1 GB of video RAM dedicated.

  My graphic card/adapter is an AMD Radeon HD 7540D.

  I have 8 GB of total RAM, and when I check my profile, this happens:

  Total available graphics memory: 4096 MB

  Dedicated video memory: 512 MB

  Video memory: 0 MB

  Shared system memory: 3584 MB

  I would spend at least a gigabyte of video memory dedicated , but I can't figure out how. I restarted my compurer and press F2/F10/DEL to get a certain menu, but the menu gave options for enforcement of controls on memory, not not the reallocation. I don't know if this menu has been the "BIOS" than other discussions they said access.

  Thank you and I hope you can help!

  Hello

  I wouldn't waste your time difference after that 512 MB is insignificant.

  I suggest using a discrete graphics card.

• Satellite A205 and 4 GB RAM problem

  Well today I got a new stick of Ram DDR2 2 GB, bringing my total Ram to 4 GB. However, my computer recognizes 3 (3070 MB) to be exact. I am running Windows 7 64 bit. I'm guessing that the issue has to do with * remapping memory in the Bios is enabled * however I do not have this option. I tried to download the latest version of the Bios off toshiba.com, version 5.20, well, it won't work, I tried to do it through Windows, as well as on a CD, I get the error messages.

  So I was wondering should I get the BIOS also? If yes where? My Bios is Phoenix TrustedCore.

  > However my computer does recognize that the 3 (3070 MB) to be exact.
  In the BIOS settings or directed by operating system preinstalled?
  > I am running Windows 7 64 bit. I'm guessing
  Can you please check this and remember what version of the OS is preinstalled on your system?
  > I should get the BIOS also? If yes where?
  Do not play with such things. Use BIOS Toshiba support only page.

• Satellite L450: upgrade RAM: BIOS shows 8 GB, Win 2 GB

  Hi all

  I have a L450 - 13L that has provided my company to me with 2 GB of RAM, it was about 2 years ago now...
  The laptop has been very good, but it has been gradually slowing down with the applications that were installed and suites operation
  so I recently decided to upgrade the RAM.
  Research on the web I found that I can install 2 RAM cards each a maximum of 4 GB, which is what I did.

  The RAM is IN2V4GNXBFX DDR2 4 GB 800 Mhz SODIMM

  What I have noticed is my laptop is now a little faster, but not much

  If I open the control configuration\systeme Zumex tells me that I have more than 2 GB of RAM
  If I open the BIOS it tells me that there are 8 GB of RAM

  What I did wrong or what should I do to get the RAM working properly

  I tried just putting 1 RAM card and new control configuration\systeme shows 2 GB and Bios 4 GB
  I tried to Exchange 2 cards between the slotts

  Any help much beautiful

  Hi mate

  What chipset do you have?

  The laptop with the Chipset Mobile Intel (r) GL40 Express supports 4 GB RAM max. This means that you can use 2 x 2 GB RAM modules

  The laptop with the Chipset Mobile Intel GM45 Express supports 8 GB of RAM. In this case, you can use 2 x 4 GB RAM max modules.

  In addition, it would be interesting to know what version of Windows 7, you use. 32-bit recognize 3.2 GB RAM max. The 64-bit version would recognize the total RAM.