touch in part does not respond, Iphone 5 s

Similar Questions

• iPhone 5 s screen sometimes does not respond to touch

  I bought for almost a month, there is however a problem annoying me lately.

  As a first step, the screen did not touch once per day.

  A few days later, this problem happened all too often that I just couldn't ignore it more.

  Fortunately, I found the way to resolve is to turn off the screen and then turn it on (not reboot the phone), so the screen can work again.

  Just as I was about to return to drag it to the screen, the problem of the screen does not appeared immediately, and that just happened to me when you type these words... so I could only repeat these steps once more. I must say that is rarely the case, most of the time, I only need to do this once.

  I would like to ask if anyone knows how to fix this bug (maybe?) completely

  Thank you and sorry for my bad English ^ ^ |

  To make sure that it is not software related, set it back to factory settings, without using any data backup later. Set up the rest of the personal settings manually and test the screen.

  If the screen is working again, restore the last backup. If the problem returns, the data backup contains damaged data, causing your issues.

  If it still does not respond, it is a hardware problem and the phone must be repaired by Apple or an Apple authorized Service Provider:

  Use iTunes to restore your device to factory settings - Support Apple iOS

  Find an Apple authorized service provider

  Apple iPhone - contact Support - support

• Since the update to 16.09.20 my acrobat on iPad application is extremely slow and does not respond well to the touch

  Since the update to 16.09.20 my acrobat on iPad application is extremely slow and does not respond well to the touch

  Hi TG24.

  Acrobat Reader 16.09.21 is now available in the App Store.

  It should solve the performance problem that you are experiencing.

  We apologize for the inconvenience.

• iPod touch 5th generation does not illuminate.

  I got this iPod since the end of 2013. The home button has stopped working for a period of one month. Last night my battery was sufficient to last for several more hours, my iPod worked perfectly well. Then when I go to check this morning, it does not work. Not at all. When I tried to look it up on the way to solve the problem on Apple support, someone explained how try restarting it through the power and the "home" button. However, even once my home button does not work. I tried holding down the power button, then pressed on and even once tried to plug it into the charger to the wall, he still won't turn. Another user said try to connect to Itunes to see if I can restore it, ultimately, it failed for the fact that Itunes does not recognize it. I could really use some help.

  Press the sleep/wake and Home buttons and hold for at least 10 seconds.

  If this is not enough, take a look at these articles Support from Apple:

  If your iPhone, iPad or iPod touch does not respond or does not turn on - Apple Support

  Use iTunes to restore the iPhone, iPad or iPod to factory settings - Apple Support.

  As a final step, try recovery mode. Turn off your unit, then plug it to your computer with the hold home button. Hold down Home button until you see the logo on the screen of your iPhone iTunes. After that on your computer, you should see the iTunes window saying that your iPhone needs to be restored to factory settings. Click Restore.

  More info here:https://support.apple.com/en-us/HT201263

  If these steps do not work, contact Apple and ask for help.

  https://www.Apple.com/support/iPhone/contact/

• Satellite Pro U300: the cursor of the touchpad does not respond

  Cursor does not respond

  Hi dude

  Have you checked if the touchpad is probably disabled?
  You can enable and disable the touch pad by pressing FN + F9.

  In addition, it would be interesting to know if you can use the USB mouse properly.
  If more information is needed

• my Mozilla Firefox is reduced to a small rectangle (top left of the screen) and does NOT RESPOND to my attempts to use the Firefox browser. That's happened? Firefox would RESTORE it please the Firefox browser to my laptop.

  I was Mozilla Firefox under Internet Explore months ago. Very happy with the maintenance functions, etc. A few weeks ago, I received a message from update while doing some work but have not installed the update at that time. Another update message came with a note of support, confused indicating some dangerous consequences if I have not installed the update.
  A few keystrokes later and my screen seem to go haywire, and my laptop does not respond to my cursor. I stopped. When I restarted and went to the shortcut of Firefox a tiny icon (1 "x 1/4") replica of a part of the normal screen of Yahoo! Firefox appeared and continues to do so whenever I try to use Firefox. I am now to Internet Explore. HELP me to go back to the use of Mozilla.

  Right-click on the image of Firefox in this small window of Firefox and see if there are in this menu popup enlarge . If so, click on enlarge.

  To be clear, Yahoo! Firefox is a modified version of the official Firefox program and may have defects that are not in the official version.

• HP LaserJet 200 colorMFP M276n slow or does not respond after sleep/wake

  Hi all

  Bought a printer HP Laserjet M276n colorMFP 200. Set up the printer and it's printing of windows and mac computers (also via the local area network (wireless) and even the iPad and iPhone) and scan directly to the pc and mac. Also configured the network folder scan function. Works like charm.

  But... When I try to do something after the machine is in "standby mode" everything goes wrong.

  1 - printing takes longer path to front.

  2 - operation of the toutchscreen (for scanning to network folders, or to photocopy anything) is not feasible. If the machine says it takes about 10 to 15 seconds per order. Sometimes the machine does not respond.

  3 - wireless devices sometimes have trouble with the connection to the device.

  4 - access to the machine via the web interface content (yet) is slower, if not impossible.

  When I manually reboot the printer (using the power button) the machine works fine again.

  But I can't immagine what how HP intends to use the machine.

  Anyone know how to solve this problem, or if it could be a configuration error during my dissertation?

  Also is it possible to disable the sleep mode at all?

  Thanks in advance.

  Kind regards

  By Duringshoff

  The program installation/Specs:

  The printer that is connected to a switch. Connected to the router (wireless).

  Printer is not directly connected to any computer over the network.

  On the printer, I put 'Sleep delay' to '1 hour '.

  On the printer, I set 'Auto Power' down on '' never. ''

  MacBook Pro 13 "under OS X 10.9.1"

  Windows PC and laptop. Both running Windows 7 (Service pack 2, I think)

  IPad IOS 2 7

  IPhone 4 running IOS 6

  router: Cisco EPC3925

  switch: Netgear GS108

  Thanks for letting me know Per_Duringshoff.

  I checked online and the latest version of the firmware is 20140521. But it is not a list for 10.9 update.

  10.8 has the firmware update available. If you have less then 10.9 another Mac or a Windows computer, you can run the update of the firmware in this way. Color HP LaserJet Pro 200 pilot M276nw MFPS.

  Let me know when had time to try the steps listed and if it helped.

  Have a nice weekend!
  Thank you.

• Screen does not respond

  Hi all

  I have the already known problem that my touch screen is not responding. I already rebooted my phone but I can not enter my PIN. Because I'm on vacation I habe no possibility to connect my neigter z3C with mouse or PC.

  2nd thing is that I have this unknown symbol on my status bar. http://www.Fotos-hochladen.NET/uploads/image40yfz8uhvw.jpg

  Do you see a chance to solve my problem? I would also reset my phone so that I can make some pictures again. But don't know how to do without mouse or PC.

  Waiting for relief
  See you soon
  Tim

  If your screen does not respond to the touch then it sounds like a hardware problem, but I cannot go that you describe however for questions like this you would need to return your device to the place of purchase or contact the Xperia and have your device inspected http://www.sonymobile.com/global-en/support/contact-us/

• Dell Inspiron 3147 11.6 "- touchscreen"in part"does not work after the pilot light"

  Every time when the laptop goes to sleep mode in itself and I put on, the touch screen will be in part does not, to be more precise, is the upper part of the screen. The problem is that on the screen, mouse and touchpad work correctly. Now I can solve the problem by pressing the power button to let him sleep and a second time to activate it, but I don't want to do it every day.

  Anyone has the answer to this? Please, I beg you! I just got a few days ago!

  Thank you.

  Hey, guys, I had the touchscreen partially responsible (upper right part) + 100% of the CPU. What I ended up doing, it was a clean install of Windows 10 and do NOT install Dell Quickset. I repeat, DO NOT install of Quickset. Hardware works fine without it and I stopped to get 100% of the CPU after idle and touch screen works normally. The only downside is that I get an unrecognized component (ACPI\SMO8810\1), which I think has to do with the keyboard locking in tablet mode. This isn't the complete solution of 100%, but I feel that the Dell power plan is not coded correctly. For any question, you guys might have, let me know!

• I can't transfer photos from iPhone to MacBook Air. When I opened the Photos on a Mac, there is no tab 'import' alongside the actions, projects, Albums. iTunes is up to date. File menu does not appear iPhone

  I can't transfer photos from iPhone to MacBook Air. When I opened the Photos on a Mac, there is no tab 'import' alongside the actions, projects, Albums. iTunes is up to date. File menu does not appear iPhone

  The "import" tab appears only when the iPhone is connected to the Mac via a USB port.

  ITunes detects your iPhone when it's connected?

  If iTunes does not recognize your iPhone, iPad or iPod - Apple Support

• Thunderbird starts by does not respond after the update to version 38

  I've updated to version 38.0 yesterday and since then whenever I open Thunderbird, he refuses to open and top watch does not respond. I have to close it via the Task Manager. What's past and how to fix it?

  > I tried in safe mode and it opens and I see my mail but when I try again to open it in mode normal it is just the same thing.

  This clearly suggests that something you added to Thunderbird or the operating system is causing at least some of your problems. If the problem occurs with the OS in normal mode and Thunderbird in SafeMode - http://support.mozillamessaging.com/en-US/kb/safe-mode - then you should suspect a program that is loaded by the operating system, such as antivirus. But if it helps me to http://support.mozillamessaging.com/en-US/kb/safe-mode , then the problem is related to an add-on, or accerlation of material found in tools | options | Advanced | General

• Satellite A210 - 17l - keyboard does not respond

  Hello

  I have a problem that is driving me crazy.
  When I press F2 or F12 to switch on the keyboard behaves as it should.
  However if trying to load a Boot CD or Usb car via the options F12, the device is recognized
  but click on any other key, the cursor just sits there intermittently at me and the keyboard does not respond.
  What makes strange, is that an external keyboard is recognized but the mirrors one internal.
  I have the latest version of the bios update.

  F2 in the bios - ok keyboard.
  Start in win7 - keyboard ok.
  Insert bootable back disk via F12 option-charges but no keyboard reagent.
  I think a partial corrupt bios
  Someone has ideas about problem or even a solution.

  Posted by mr.pound
  

  but click on any other key, the cursor just sits there intermittently at me and the keyboard does not respond.

  And what should happen on this stage?

  For me, this looks like a problem with your startup disk.
  I installed OS using different disks of Microsoft or USB recovery media and all you have to do is click on most of the time on the button NEXT.

  If the keyboard works in BIOS and Windows, I see no problem with the keyboard there.

• address bar does not respond by typing the URL and press on enter

  Address bar does not respond by typing the URL and press to enter. All the other links work well. I used version 7 and version 8 upgrade did not fix the problem

  I had the same problem. I just uninstalled digsby ask toolbar, and now it works.

• End of 2012 iMac keyboard does not respond after sleep

  I have an iMac late 2012 and my keyboard does not respond after that lay down the computer.  When I type the password box is very slowly filled with random letters that are not my password and hit enter just adds another letter.  In my view, that it is a common problem that I am many have known for a few months.  Is there a solution to this I have reset PRAM and SMC, and no work.  It's very irritating and I hoped with every update from El Capitan, this would have been fixed, but not joy.

  I don't know about "modern" Mac and OS X versions, but on my old Powerbook / Tiger awakened from his sleep, it was necessary to 'click' somewhere (I clicked on always in the password field) before the same keyboard would meet all

• Interruption of the WiFi connection.  Green light is the Airport Express. Settings Network said the cable for the Wi - Fi connection is not connected or the device at the other end does not respond.

  Interruption of the WiFi connection.  Green light is the Airport Express.  Settings Network said the cable for the Wi - Fi connection is not connected or the device at the other end does not respond.  Tried to reset Airport Express, but remained light amber or orange flashing.  I unplugged it and waited and plugged back into the light turned green.  Rebooted computer (Mac Pro). Parameters of said the same thing.  Managed to create a WiFi "network with the ethernet in the network settings section, and yet I am wireless.  I am online but not wired and WiFi settings still says not connected, and either the cable for the Wi - Fi is not plugged or the device at the other end does not respond. I don't understand this situation.  My original WiFi name disappeared.  How I am on the internet?

  What is the brand and model of the modem Internet you have the AirPort Express directly connected by Ethernet? What exact model number is your Express?