touch screen has two lines in the upper part

Similar Questions

• My touch screen has a problem after downloading the IOS 9.0.2. Already try apple advises the steps. But the problem still occur. Already done restart of strength. Factory setting Reset also possible. But still the same problem. Can only be used at one min

  Hello!!!

  IM Apple Fan.

  Purchased IM Ipad2, Ipad4, Iphone6

  Last month I already buy s Iphone6 +.

  Today I feel unhappy

  MY IPHONE 6 'history '.

  My touch screen has a problem after downloading the IOS 9.0.2.

  Already called and try apple advises the steps. But the problem still occur.

  Already done restart of strength. Factory setting Reset also possible. But still the same problem.

  Only can be used for a minute. After that... The problem comes in again & again & again...

  APPLE.COM

  Can U help me

  Only products of Apple of love before updating the version 9.0.2

  iOS 9.0.2 happened some time. The last iOS is iOS 9.2. If you have not updated, updated. If you restored to the factory, it must have downloaded iOS 9.2. Also, if you restore to the factory and the problem is still there, then you must make an appointment at the Genius Bar to the nearest Apple store or Apple authorized service provider or call the Apple Support to have the device examined by Apple. There seems to be something wrong with the screen.

• view on screen has been moved to the left by two inches, leaving two inches of black screen on the left side?

  view on screen has been moved to the left by two inches, leaving two inches of black screen on the left side?  Affects all programs...

  Don't know what caused this to happen, don't know how to fix it.  Can't see the right hand two inches from the view available...

  Hello

  1. don't you make changes to the computer until the problem occurred?

  Method 1: I suggest you to install the updated drivers for the video card on the computer by visiting the manufacturer of the video card and check if it works.

  How to manage devices in Windows XP: http://support.Microsoft.com/kb/283658

  Method 2: Resources for troubleshooting problems in Windows XP

  http://support.Microsoft.com/kb/307960

  Hope this information is useful.

• My screen is split in two. The upper part is displayed at the bottom of the screen.

  Original title: Screen display problem

  My screen is split in two. The upper part is displayed at the bottom of the screen. How can I solve this problem?

  Hello
   
  1. using two monitors?
  2 have you made any changes to the computer before the show?
  3. is that the screen is upside down?
  
  Method 1: Open the troubleshooter of display quality
  http://Windows.Microsoft.com/en-us/Windows7/open-the-display-quality-Troubleshooter
   
  Method 2: Press CTRL + ALT and the up arrow key.
   
  Check to see if that makes a difference

• There are all sorts of symbols in the upper part of the screen on different things. (Delete, answer, answer all etc)

  Thunderbird didn't work at all the other day and I had to keep going in the Task Manager to shut it down, but then he began to work the next day and it works. However, there are all these symbols covering in the upper part of the screen.

  It seems that you have a mixture of two different languages.

  Close Thunderbird.

  Back up your profile folder.

  • http://KB.mozillazine.org/Profile_backup
  • http://KB.mozillazine.org/Profile_folder_-_Thunderbird

  Uninstall Thunderbird:
  Via 'Control Panel' or 'Settings' > 'programs and features '.
  Select Mozilla Thunderbird and click 'uninstall '.
  uninstall all instances of Mozilla Thunderbird.

  Download the language appropriate for your operating system from the link below and install it.

  • https://www.Mozilla.org/en-us/Thunderbird/all/

  Report on the results.

• Satellite A300-1IL - monitor has white lines at the bottom

  Good evening

  about an hour, followed by my satellite a300 monitor has white lines at the bottom.
  I try to stop, change the resolution but i just turn on my laptop, the screen has this white line.

  It is a problem of monito'rs or videocar problem?

  Sorry for my ebglish

  Hello

  > It is a problem of monito'rs or videocar problem?
  It's easy to say; you need to connect the external monitor to the laptop and need to check if the same if possible lines on a second external display.

  If the lines were visible on the external monitor, so that the GPU fault is possible.
  Otherwise, it may be defective internal display.

  Welcome them

• HP Pavilion 11 x 360: Touch Screen has suddenly stopped working?

  I am on Windows 10 and recently, I decided to update my drivers using driver Booster. Everything worked well and I had no previous problem with this laptop or Windows 10. Once I have completed their update, it prompted me to restart my computer, and after that he started upward, the touchscreen stopped working. For this reason, I am almost certain that it is a driver problem. I looked on other forums and have tried many suggestions. So far I have

  -Restarting my laptop (of countless times)

  -Disabled and enabled the "HID-compliant wireless radio controls.

  -Unchecked the boxes that say "allow this computer to turn off this device to save power" under "Universal Serial Bus controllers".

  -Update the drivers (it just tells me that the best version is already installed)

  -I have restored the laptop because I'm not entirely sure how to do it correctly.

  It doesn't let me roll back the touch screen drivers. When I choose "show devices" extra touch screen drivers appear, but as the "HID-compliant touch" screen say now, "this hardware device is not connected to the computer. (Code 45)

  To resolve this problem, reconnect this hardware device to the computer. "under the status of the device.

  I have no idea how to reconnect the material and I do not understand how it is even not connected.

  I am beyond confused and frustrated and don't know what else to do. Please help if you think you might know what to do! All advice is appreciated. Thank you!

  Hi there @StevieRachelle3,

  Thank you for joining the Forums HP's Support and welcome! It is a great place to ask questions, find solutions and get help from others in the community! I read your post on the Forums of HP Support. I wanted to join you and help! I understand that the touchscreen on your PC portable HP Pavilion 11 x 360 stopped working after you did an update.

  You mentioned that you used a program called driver Booster to make the driver updates.

  Please follow these steps to see if you can activate the touch screen:

  • Open the Device Manager
  • Find "Human Interface Devices"
  • Expand "Human Interface Devices"
  • Right-click on "touch screen HD compliant."
  • Click 'Activate' (if available)
  • Restart your laptop.

  If this does not change anything, please use the system restore feature and choose a date that was before the problems began.

  To use the system restore in Windows 10:

  • Go to the Search
  • Type of Control Panel
  • Click on Control Panel
  • Click System
  • Click on the System Protection
  • Click the System Protection tab
  • Click on System Restore
  • Click Next
  • Select "Choose a different restore point"
  • Click Next
  • A box that says "Restore your computer to the State it was in prior to the event selected" will pop up
  • Choose event
  • Click Next
  • Click Finish
  • Click Yes to confirm

  When the system restore is complete, you'll be up a pop that says that it has been completed.

  Here is a link to the HP Support Assistant, if you need it. Simply download and run the application and it will help with the software and drivers on your system that need updated.

  You can also use the Windows updates to update the drivers or you can go to the page HP Pavilion 11 x 360 Notebook PC Driver and software to update the drivers manually.

  Please let me know if I answered your question by clicking the "Thumbs up" if the troubleshooting in this post steps solves the problem for you please click on the button "Accept as Solution" . This will allow to the others is that present the same problem a solution also. If you need assistance, I would be more than happy to continue to help you. Please just re-post with the results of troubleshooting as well as your model number (How can I find my model number or product number?).

  I hope this helps!

• Normally, when you open the page palette in InDesign, it is divided into two. The upper part is where is the master page (and a page named none), while the lower part is where are the actual pages of documents. Unfortunately, when I opened my palette of p

  Normally, when you open the page palette in InDesign, it is divided into two. The upper part is where is the master page (and a page named none), while the lower part is where are the actual pages of documents. Unfortunately when I opened my palette (InDesign CS 6 on a Mac), there is no upper and lower part of the page-only the lower part is displayed. When I put my cursor on my pages, it tells me that I "Applied A-master".

  Why not my top shows (A-master and none)? The pages that I don't "Act" like master pages - for example, I can't get past page numbering.

  
  

  Any help is appreciated. Thank you!

  It looks like the upper part may be in a State reduced - the line was pulled up.

  Just of the cursor on the line that separates the upper and lower sections, and drag it to the bottom.

• First of a sudded, my firefox browser is not allowing my to click links and open pages, or open anything on the upper part of the screen.

  First of a sudded, my firefox browser is not allowing my to click links and open pages, or open anything on the upper part of the screen. For example, I go to my email and I can't click on the Inbox, send, create folders, mark as unread. It's like this on all websites? Its really annoying I can't do anything because most of the sites have login at the top of the screen and I can't connect to anything.

  This problem may be caused by the Yahoo! toolbar as scopes as well down and covers the top of the browser window, allowing links in this part of the screen not clickable.

  • https://support.Mozilla.com/kb/troubleshooting+extensions+and+themes

  You can keep an eye on this thread:

  • [707748/forums/contributors/707748]

• Why can I not see my character... I don't see a very small part in the upper part of the screen

  After, I selected and installed my character... I only see a tiny part of it in the upper part of the screen

  Personas are for decoration of the Firefox toolbar area, not for the content area.

• Open emails are not full screen and cannot lift the upper part.

  When I opened an e-mail he opened 2 "short of the upper part of the screen. When I try to raise the latter stops the short 2 ". I can optimize it, but I didn't used to have to before someone else used my computer. Please, any help I've tried everything. Gerald frustrated

  When I opened an e-mail he opened 2 "short of the upper part of the screen. When I try to raise the latter stops the short 2 ". I can optimize it, but I didn't used to have to before someone else used my computer. Please, any help I've tried everything. Gerald frustrated

  Please tell us what email program you use.

• My screen has also placed on the left side of the screen.

  My screen has also placed on the left side of the screen leaving the right dark and some of the background repeating the top of the screen. I tried to change the resolution and it is on a netbook, it is to do with an external monitor. but I got an advance of external monitor plugged in if I remember correctly, that the problem was until I plugged in this thread.

  Hello

  1. you remember to make changes to your computer, after which the issue started?

  Step 1:

  I suggest you reinstall the drivers of display cards, and check if the problem persists.

  Follow the step in this article.

  http://support.Microsoft.com/kb/283658

  Step 2:

  Perform a System Restore to the point that it was operating normally.

• How can I use Windows 8 to adjust the size of my desk? He 'overflows' the screen about two inches around the perimeter.

  He 'overflows' the screen about two inches around the perimeter. Example: The clock in the bottom right is almost invisible.

  I don't need to change my resolution and cannot do with my monitor. Also, I don't speak of re-sizing the interface, not the wallpaper.
  What kills me is that I did this work before and he doesn't remember how!
  I have the latest drivers for my card AMD (helps nothing in the Catalyst Control Center) and the generic PnP monitor.
  How can I get instead of Windows 8 which allows me to adjust the size of the screen (no icon or text size and no resolution)? Am I crazy, or was it easy to find before?
  Thank you!

  Hello

  This looks like a problem of scale .

  Open the Catalyst Control Center.

  Expand the section My Flat-Panel digital .

  Select the item Properties (digital dish) .

  In the resizing of the Image section, place a check in the option enable GPU scaling .

  Select the image of the scale to the size of the full screen .

  Click Apply/OK.

  Test and let us know the results.

  Concerning

• How to add two lines when the second row is not visible, but also gets the first data line too?

  Mr President

  Jdev worm is 12.2.1

  How to add two lines when the second row is not visible, but also gets the first data line too?

  I want to add two lines like below picture, but want the second to remain invisible.

  

  I asked this question but my way of asking was wrong, that's why for me once again.

  Concerning

  Try to follow these steps:

  1. in the database table to add the new column "JOIN_COLUMN" and add the new sequence "JOIN_SEQ".

  2. Add this new column in the entity object. (You can add this in entity object by right clicking on the entity object and then select "Synchronize with database" then the new column and press on sync)

  3. in your bookmark create button to create only one line NOT 2 rows.

  4 - Open the object entity--> java--> java class--> on the entity object class generate and Tick tick on the accessors and methods of data manipulation

  5 - Open the generated class to EntityImpl and go to the doDML method and write this code

    protected void doDML(int operation, TransactionEvent e)
    {
      if(operation == DML_INSERT)
      {
        SequenceImpl seq = new SequenceImpl("JOIN_SEQ", getDBTransaction());
        oracle.jbo.domain.Number seqValue = seq.getSequenceNumber();
        setJoinColumn(seqValue);
        insertSecondRowInDatabase(getAttribute1(), getAttribute2(), getAttribute3(), getJoinColumn());
      }
  
      if(operation == DML_UPDATE)
      {
        updateSecondRowInDatabase(getAttribute1(), getAttribute2(), getAttribute3(), getJoinColumn());
      }
  
      super.doDML(operation, e);
    }
  

    private void insertSecondRowInDatabase(Object value1, Object value2, Object value3, Object joinColumn)
    {
      PreparedStatement stat = null;
      try
      {
        String sql = "Insert into table_name (COLUMN_1,COLUMN_2,COLUMN_3,JOIN_COLUMN, HIDDEN_COLUMN) values ('" + value1 + "','" + value2 + "','" + value3 + "','" + joinColumn + "', 1)";
        stat = getDBTransaction().createPreparedStatement(sql, 1);
        stat.executeUpdate();
      }
      catch (Exception e)
      {
        e.printStackTrace();
      }
      finally
      {
        try
        {
          stat.close();
        }
        catch (Exception e)
        {
          e.printStackTrace();
        }
      }
    }
  
    private void updateSecondRowInDatabase(Object value1, Object value2, Object value3, Object joinColumn)
    {
      PreparedStatement stat = null;
      try
      {
        String sql = "update table_name set column_1='" + value1 + "', column_2='" + value2 + "', column_3='" + value3 + "' where JOIN_COLUMN='" + joinColumn + "'";
        stat = getDBTransaction().createPreparedStatement(sql, 1);
        stat.executeUpdate();
      }
      catch (Exception e)
      {
        e.printStackTrace();
      }
      finally
      {
        try
        {
          stat.close();
        }
        catch (Exception e)
        {
          e.printStackTrace();
        }
      }
    }
  

• my tools in the upper part has disappeared? -What should I do?

  my tools in the upper part has disappeared? -What should I do?

  See printscreen: screencast.com/t/gGCnCkBaLgj

  Check if the window--> control is checked or not.