Touch settles not on G-slate

Similar Questions

• First HP Calculator graphic: touch screen not responding do not on first HP Calculator after the upgrade with Conectivity Kit to the last v

  Touch screen not responding is not after the upgrade to the latest version of the software worm with connetivity Kit on my PC.

  the Cal turns on and all buttons work, but I can't get the screen to answer. I have reset the Cal and reinstalled the software with the connectivity Kit, but the screen doesn't always react do not... Help

  Bob

  Hi!, @bigbob50:

  If your FIRST HP, have the warranty available, you can call, support Centre and the support oh HP, closer, your home of... http://h30434.www3.HP.com/T5/Android/phone-assistance-in-the-world/TD-p/5038024

• New Ipod Touch does not illuminate

  Buy IPod Touch last summer (August 2015) and died this morning. Can not activate it or it will load. Any suggestions?

  Try the following steps:

  1. Press and hold the home and power buttons at the same time for at least 15 seconds until you see the Apple Logo.
  2. If this does not work, load your iPod for at least 10 minutes, or until the Apple logo appears.
  3. If none of the steps above do not work, here is a link to give you more information: If your iPod touch does not illuminate
  4. Be sure to contact the Apple support if you need more help.

  Good luck!

• iPod touch does not present as associated device

  My iPod 5th generation touch does not appear on my list of device associated with my Apple account.  How I "associate"?

  Just where are you looking?

  You use the same ID and the device uses one of these characteristics?

  On the devices associated with

  When you use some features of the iTunes Store on your iPhone, iPad, iPod touch, or computer, your computer or iOS device is automatically associated to your Apple ID in iTunes account settings. These features include:

  • Turn on iCloud music library.
  • Download after purchase , you did in the iTunes Store, App Store, iBooks Store or Mac App Store.
  • Enabling automatic downloads.
  • Turn on sharing of family.
  • Subscribe to iTunes game.

  View and delete devices in iTunes - Apple Support

• AT1S0 - Touch does not work well on the edges?

  I just bought the AT1S0 7 "Tablet but I find that the touch is not consistent on the edges of the screen.

  Quite often, I have to press the apps button or button back several times until it registers. Also try to play all the games that require to touch near the sides is impossible. I recently installed Dolphin HD and I can not start it as you need to press the following during installation, located in the top right corner and it will be not to the touch.

  Otherwise, anyone having this problem or is it just my machine?

  Thank you very much

  Also curious to know if there will be an upgrade to ICS 4.0

  Post edited by: jarcey

  Hello

  You use the latest version of Android on your fulfillment?
  As far as I know, can be updated via installed Android Toshiba service station system. Run this application and check whether an update is available.

  The 4.0 update ICS is not known to me unfortunately not found no details on the page of Toshiba

• iPod Touch will not connect to iTunes

  My iPod Touch will not connect to iTunes. When I connect it to my laptop with the cable my laptop USB recognizes the iPod begins to charge and 10 Windows asks me if I want to open it to view files, but it seems to treat it as a camera and I just want to know if I want to get pictures on it and on the laptop.

  I made sure I have the latest software updates on the iPod and iTunes and thought this would fix the problem, but iTunes still does not recognize my iPod because it never appears on the Panel for me to sync things for her, etc.

  How can I get my iPod to be recognized by iTunes again? Very recently, it stopped connecting.

  If your computer does not recognize your iOS device, follow the steps proposed by Apple.

  https://support.Apple.com/en-us/HT204095

• After updating my iPhone to ios 9.3 iPhone touch does not

  HI guys! I'm too frustrated by the question. I'm updating my iOS to 9.3 (Build 13E233) on my 6-64 GB iPhone (model A-1586) and now I can't even use 10% of my phone. My touch screen works not even taping 100 times but if I press the lock and unlock my phone, my touch screen works very well for a few seconds then freezes while on the other hand all other keys work well while the touch is blocked (for example, Home, Power, Volume buttons) and I know my phone is not stuck but only touch does not. I'm too worried because I can't use my phone even for one moment what to do any help? Any help will be appreciated sorry for my bad English. Following that I

  Try resetting your device. This will not erase your data stored on that device.

  • Press and hold the sleep/wake button
  • Press and hold the Home button
  • Press and hold both buttons until the display turns off and on again with the Apple logo on the subject.

  Alternatively, you can go to settings - general - reset - Reset all settings

  If that doesn't work, restore your device to factory settings. Please note that this will delete the data on your device.

  Take a look this Apple Support article: use iTunes to restore the iPhone, iPad or iPod to factory settings - Apple Support.

  As a final step, try recovery mode. Turn off your unit, then plug it to your computer with the hold home button. Hold down Home button until you see the logo of iTunes on the screen of your device. After that on your computer, you should see the iTunes window saying that your device needs to be restored to factory settings. Click Restore.

  More info here:

  https://support.Apple.com/en-us/HT201263

  If these steps do not work, contact Apple and ask for help.

  https://www.Apple.com/support/iPhone/contact/

• My iPod touch will not connect to WiFi and I followed the steps posted. Also, when he dies he thinks that it is December 31, 1969. What can I do to fix this?

  My iPod touch will not connect to WiFi and I followed the steps posted. Also, when he dies he thinks that it is December 31, 1969. What can I do to fix this?

  Not knowing what the 'followed the steps posted' have been

  The iOS device connects to other networks? If Yes, which tends to indicate a problem with your network.

  The iOS device sees the network?

  Error messages?

  Other devices connect now?

  The iOS device has connected before?

  Try the following to rule out a software problem:

  -Reset the device iOS. Nothing will be lost

  Device iOS Reset: Hold down the On / Off button and the Home button at the same time for to

  ten seconds, until the Apple logo appears.

  -Power off, then back on your router

  . - Reset network settings: settings > general > reset > reset network settings

  - iOS: troubleshooting connections and Wi - Fi networks

  If your iPhone, iPad or iPod touch connects to a Wi - Fi network

  - iOS: recommended for WiFi routers and access points

  -Restore from backup. See:

  iOS: how to save

  -Restore factory settings/new iOS device.

  If still problem and it does not connect to any networks make an appointment at an Apple store Genius Bar because it appears that you have a hardware problem.

  Shop Apple Store - Genius Bar

• iPod touch does not recognize my password 9.2.1 apple ios

  My Ipod Touch does not recognize my password for Apple.  IOS 9.2.1

  Password for what?

  What is the exact wording of any messages?

• iPod Touch does not have 6th gen.

  So my 6th generation iPod Touch decided to completely brick itself. It is quite insensitive, appearing by all measures to be extinct. It does not have to be plugged into a charger or computer. I tested with several threads to make sure that's not the problem. All the buttons do nothing, no matter how long they are kept pressed. I seem unable to force it to turn it on (or stop, if it's just particularly good at playing dead) and can't seem to do anything but keep papers.

  I did not anything out of the ordinary to cause damage, so I don't see why it would be brick suddenly like that. I am running the latest iOS with the updates so far. As far as I can tell, it's just death. Everyone knows a similar problem or have any ideas on how to fix it?

  I'll try to get to an Apple store this week, but I guess they'll just replace. This isn't really a solution to the problem here. The problem is... it's the second time that this happens. When I bought my 6th Gen, he bricked within 72 hours. It is a common thing with the Gen 6 iPods or am I cursed? I really do not have to replace my iPod every 3 months.

  Helio83 wrote:

  I'll try to get to an Apple store this week, but I guess they'll just replace. This isn't really a solution to the problem here. The problem is... it's the second time that this happens. When I bought my 6th Gen, he bricked within 72 hours. It is a common thing with the Gen 6 iPods or am I cursed? I really do not have to replace my iPod every 3 months.

  The Apple Store is a good idea. You have restored iPod from a backup of the previous iPod? See if any of these articles get the operation of the iPod. If you cannot update or restore your iPhone, iPad, or iPod touch - Apple Supportand If your iPad, iPhone or iPod touch does not respond or won't turn on - Apple Support

  -AJ

• ThinkPad 10 - Windows 10 company-screen touch does not?

  Hello

  I have a Thinkpad 10 (type 20E30015MSI) with operating system Windows 10 Enterprise. I can't touch screen not working at all. I tried the BIOS/UEFI update with the latest version, I got on the lenovo support site. I have a missing driver (Wacom device (driver is not intended for this platform).) I'm stuck here.

  I found a few ideas that should reinstall the driver from the Device Manager. But I'm not all HID - touchscreen drivers. Or anything like that yet little touchscreen boards...

  Someone at - it ideas?

  Thank you!

  I think that the missing drivers can be found in the SCCM package. See here:

  http://support.lenovo.com/nl/en/products/Tablets/ThinkPad-Tablet-Series/ThinkPad-10-20E3-20E4?tabNam... and software | Drivers and software & beta = false

• My brand new ipod touch will not sync with itunes. It says I have to update the software, but it is already updated on itunes and the ipod.  Help!

  My brand new ipod touch will not even appear on itunes. It says I have to update the software, but it is already updated on itunes and the ipod.  Help!

  What version of iTunes you have?

• iPod touch does not work.

  I have an iPod touch that I got from a friend X years. So I don't know who it is. From last night, it will not work in my car. I can't turn it on, and my Mac isn't even recognize it either.
  My most recent iPod touch does not right in my car. So I gave to my current girlfriend. How can I fix these problems?

  - iOS: do not respond or does not light

  -Also try DFU mode recovery mode post-test

  How to put iPod touch / iPhone in DFU "Karthik doodles."

  -If failed and that you cannot completely turn completely the iOS device, leave the battery to drain completely. After loading a hour repeat the foregoing.

  -Try a different cable

  -Try on another computer

  S ' there is still not successful that usually indicates a hardware problem and an appointment at an Apple store Genius Bar is in order.

  Shop Apple Store - Genius Bar

  What to do when not working do not directly in the car?

  Have you contacted the manufacturer of car system? Sometimes they are not compatible with the new version of the iOS.

• My Acer V5 Touch will not play videos it just says: cannot load, in which we Plug?

  My Acer V5 Touch will not play videos it just says: could not load the plug-in, which is missing?

  Videos of the place where?

• Software Bloggie Touch does not work because of the DEP - I can't turn off DEP for this program

  Original title: software Bloggie Touch does not work because of the DEP

  I downloaded the Bloggie Touch (Sony) software, but the function of prevention of execution of data in Windows Vista prevents me from using it. Any suggestions? I contacted Sony and they had me re-download the software on their site, but it did nothing. I tried to reset the DEP to allow the Bloggie software, but he says that the processer wouldn't let me do that. Message: I can not turn off DEP for this program.

  Any help would be appreciated.

  Hello
  the only other thing you can do is to do a Bing search for how to turn off dep.
  There are several options (not recommended by the way)
  b Eddie