Touchpad does not work on my Satellite Pro L870 - 18G

Similar Questions

• Touchpad does not work on my Satellite C850D

  Satellite C850D - touchpad does not work after the initial start-up. Will not answer keys F5 or F9.
  Don't let me even use the recovery disc. Once I go to the first page of touchpad and mouse to

  Hello

  You can use the USB attached external mouse?
  Please check this...
  Also FN + F5 (or just F5) would enable and disable the touchpad.

  In which case it won't work, please try to reinstall the driver for the touchpad.
  The driver can be downloaded from the Toshiba UE driver page.

• Touchpad does not work on the Satellite a series

  Greetings!

  I have Toshiba Satellite and I have a touchpad issue.
  My touchpad does not work. I downloaded the drivers for it, and it still does not.

  Is someone can you please help me solve this problem?

  Thank you.

  What do you exactly mean with it s not working do not?

  What cell phone do you have? Have what the touchpad driver you installed?

  Have you checked if the touchpad was not disabled?
  Using the FN + F9 key combination, you can disable and enable the touchpad feature!

• My touchpad does not work well on Satellite C55-A-1ND

  For several days my touchpad does not work well. It has nothing to do with the power touchpad button on the F5 key.

  The touchpad is most time does not and something a bit but I can't use the touchpad at all now.

  When I attach my external mouse on my laptop I can use my laptop otherwise I can't use my laptop.
  I already rebooted my laptop several times, but it helps not at all.

  I hope someone can help me!

  You said that this issue has nothing to do with the touchpad on/off function s.
  So what's exactly wrong with the touchpad? Is he disabled or enabled?

  Have you checked the settings in the control panel-> mouse-> last (device settings) tab-> settings button?

  Have you already tried to reinstall the software/driver for touchpad?
  If this is not the case, do.

  By the way: what model of laptop and what system you have?

• Touchpad does not work in my new Pro of Satellite M40X

  Hello world

  Since I bought my Satellite Pro M40X, I found that the touchpad works sometimes (especially, but not at any time when the computer is connected to an electrical outlet and the battery is full). However, most of the time it does not work and the cursor keeps freezing in the middle of the screen.

  When I use my mouse USB Genius, it works fine.

  I tried everything that follows, but all have failed:
  1. check Control Panel, who always says that my touchpad works fine and active
  2 - pressing Fn + F9
  3 - update the BIOS and drivers ALPS touchpad on the TOSHIBA site and reinstall the
  4 - run the computer in safe mode
  5. using the CD to restore the system back to factory settings

  All these tests failed and the problem is still present.

  Can someone help me solve this problem. It is still a new laptop and I have 1 year warranty. Is this a hardware problem? Please help me.

  Amir

  Hello Amir

  All what you have done is quite right and if the problem persists after the recovery procedure it may be a hardware problem. In my opinion, you should contact the Service partner and let check the device.

  If the warranty is still valid you should use. If something needs to be changed, it will be granted free and guarantee will cover all costs.

  Good bye

• The Touchpad right button does not work on the Satellite Pro L series

  The icon in the taskbar indicates that the right button is permanently pressed, if it is not.
  So I can't right click at all. A radio mouse works fine, but there are times I want to use the touchpad.

  In addition, the screen does not turn off, and the computer goes to sleep after the hours set in the options of energy saving.
  I listen to the radio a lot and do not want to display on.

  > The icon on the task bar shows that the right button is permanently pressed, if it is not.
  > So I can't right click at all. A radio mouse works fine, but there are times I want to use the touchpad.

  This could be linked to defective button. If you cannot use the right button, and the button appears to be clicked down, then I suppose that its hardware malfunction.
  In this case it must be replaced.

  > In addition, the screen does not turn off, and the computer goes to sleep after the hours set in the options of energy saving. I listen to the radio a lot, and don t want the display on.

  Have you chosen the right power Plan? In Control Panel-> power options you have to choose the diet plan and should click: change plan settings. Here, you can change the time when the display must be disabled.
  If this does not work, then I guess that this feature does not work because you press the button of the touchpad and the windows OS think that the notebook is in use

• Web Cam does not work on my Satellite Pro C850-10 t

  Hey, I have a Satellite Pro C850-10 t and my web cam does not work. Whenever I try to use it, it is said that the built-in cam is not connected or activated. I tried to download the drivers from the site web cam, but it does not solve the problem

  What should I do?
  Thanks in advance :D

  Do you use the preinstalled original WIN7 64-BIT HOME PREMIUM?
  Webcam is entered correctly in the Device Manager?

• Touchpad does not work on the Satellite A100-812

  Hello, I just bought a Toshiba Satellite A100-812 (C. Duo, 2 GB RAM, GF 7600, Vista Premium). I disabled the synaptics driver in msconfig. After a while, I turned on the driver but Touchpad still does not work. All the fn buttons work correctly (turning brightenswith FN + F6 or FN + F7 etc.) but FN + F9 (turning the Touchpad) does not always work.
  Help, please.

  ([email protected])

  Hello

  you did a reinstallation of the driver? I think that if you have disabled it with msconfig, it should work after reactivation and otherwise, to remove this driver and install it
  Once again. (So the touchpad) driver should be available after reinstalling and restarting Windows.

  Would be recognizing a few comments if it worked. :)

  Welcome them

• Touchpad does not work on my Satellite C75

  In my Satellite C75 manual is written that we can activate the touchpad 19.ne FN + F5
  but unfortunately this does not work.

  Thank you for your help

  Hello

  Fn + F9 does not active / disables the touchpad on laptop series.
  The right combination is Fn + F5 or just press F5.

  I also recommend to check this FAQ doc:
  http://APS2.toshiba-tro.de/KB0/TSB5303QQ0002R01.htm

• Touchpad does not work under Vista - Satellite A110

  I installed Win Vista business on Satellite A110...
  I downloaded the alps touchpad drivers: the drivers are installed, but it does not work!
  Is this a known issue? I did something wrong?
  Thank you

  Downloaded the correct drivers for your computer? Sometimes the machines appear to be similar, but then they have different hardware...

  Your touchpad has a function before?

  Welcome them

• TV out button does not work on my Satellite Pro M30

  Hello

  I installed Windows XP SP2 and all drivers for M30 but the "TV out" button does not work although I have also installed the tool "Controls Button from Toshiba" (continues to ask to be assigned to a program), it worked before installing the new.

  I also noticed that the "Fn + F5" also does not work too (eg. do not send the signal to the TV).

  Can anyone help?, thanks in advance.

  Hi Karim

  Write about you? :)

  In any case, try to install TOSHIBA common Modules again. Maybe it helps!

• Re: Fn key does not work on the Satellite Pro C660 2TQ

  Hello

  I bought laptop Satellite Pro C660 - 2TQ PSC0RE - 01801QGR 2 days ago and found the Fn key does not.
  Someone help me to activate it?

  Hello

  Select all programs-> Toshiba-> Flash cards, and then restart this utility.
  Now if you press Fn + F8, you should be able to turn on or turn off the WiFi.
  The FN + F9 active needs or disable the touchpad.

• Touchpad does not work on the Satellite A100

  Hello

  I bought a satellite A100 (PSAA9) and have a problem with my touchpad. For some reason, the keys do not respond sometimes and I have to press the Fn + Alt keys to solve the problem, and it works well. Later, he appears again and I didn't Kow why?

  The only thing I can say is whenever I press the key as alt Gr, the touchpad everything is blocked.

  In addition, when the keyboard is locked, my mouse is not working well (left click does not respond and do a right click does the same thing as a normal left click). Again, I press Fn + ALT and it's ok.

  Hope someone can help me please!

  Thanks in advance!

  ARNO

  HM, sounds like a very boring and weird problem. Have you tried to reinstall your system or at least a linux live CD to see if the problem still occurs if you start a different operating systems?

  If you didn t tried, then it would be useful. Maybe just a problem of software it s. But if so and the problem doesn´t want to go further, then you have a huge problem and your next step will be to put your machine to an authorized service partner. Why?

  Because if so, then you would have probably a hardware problem and you won´t be able to fix it yourself. The explanation is pretty simple and easy...

  Welcome them

• USB 3.0 does not work on my Satellite Pro L50

  Hello boffins.

  I have a problem with the driver for the Intel USB 3.0 eXtensible host controller on my L50 (running Win7 64 bit).

  I recently took my L50 Pro Satelite (PSKK3A-001001) to the repair shop because the blue ports were not running at speeds of USB 3.0 when I plugged a USB 3.0 compatible device (a WD 1 TB HARD drive). When I looked in the device tab "Display connection" Manager, HARD drive showed as connected to the ordinary C220 USB hub which is for USB.2.0. USB 3.0 eXtensible Host Controller has been inactive.

  The technician in the repair shop said:

  + I tested your machine with a new installation of Windows 8 and have been able to achieve speeds to 180 MB/s of my FlashDrive USB 3.0 without problem, which indicates that it is a matter of faulty software. We can improve your Windows 8 machine free of charge if you prefer, but I'm unable to solve the problem in Windows 7. From what I can tell, and what you have experienced, no published 3.0 for Windows 7 USB drivers can recognize the 3 USB ports installed as a USB 3 connection. If you are wanting to stick with Windows 7, I can't guarantee that you will reach speeds of USB 3.0 by using these ports. +

  It's not really good enough, Toshiba. Now, I bought this machine specifically with pre-installed Win7 (because Win8 is rubbish) that I wanted a machine Win7, including USB 3.0 ports. This machine has been published as such, having Win7 installed with 2 x USB 3.0 ports and 1 x USB 2.0. This is confirmed by the page of the specifications of Toshiba here: [http://www.mytoshiba.co.nz/support/computers/satellite/pro/l50/pskk3a-001001/specifications].

  So, my question is this: why this machine is the drivers needed to run it as advertised (i.e. under Win7 with 2 ports USB 3.0 x and 1 x USB 2.0) and if there are drivers for this device available, where are they? I tried and tried the repairman (I guess) but I'm still without a driver to run my USB 3.0 clocked ports. I tried age for the files to be transferred between pending devices.

  Maybe someone can help me find a driver that works or Toshiba will clean up their act and produce a.

  But you have installed Intel USB3.0 driver 2.0.0.102 version, right?

• Touchpad does not work on the Satellite L50t-A-131

  All,

  My touchpad has stopped working. The light of the little mouse in the upper left corner is off. When I attach an external mouse pointer appears again and everything is fine, when I remove the mouse pointer disappears again.

  I accidentally turned off in the past by pressing F5, but that doesn't seem to be the issue this time.

  I have recently upgraded to windows windows 8.1 8 and do not know if this may be a factor

  All advice welcome

  We start with basic stuff. Touchpad is correctly recognized and listed in the Device Manager?