Touchpad not working not for a few seconds after I touch it with your finger, then a more...

Similar Questions

• My watch shows the time vertically for a few seconds after I remove it from the charger.  Has anyone else seen elsewhere?

  My watch shows the time vertically for a few seconds after I remove it from the charger.  Has anyone else seen elsewhere?

  Don't know what you mean by vertically but it is normal that the  watch to display the time briefly when removed from the charger. If the  Watch is held horizontally with the number key of Crown and side on top can be turned. This is normal and is the point of view of bedside table.

• I get a blue screen for a few seconds after each reboot.

  Can you help me find how to solve this problem? Whenever the computer is now receiving a blue screen of death about 20 seconds after I see all my icons on the desktop after a reboot. I write this in safe mode on my computer.

  EMERALD ASH BORER

  These were related to fsni32. sys that is a pilot of F-secure.  I remove it and replace it with MSE

  You must also seriously update to SP2, without it, you're an obvious target for malware.

  http://www.Microsoft.com/security_essentials/

• DVD stopped working got external dvd but no not disks work runs for a few seconds then stops

  has had to put the new hard drive in the computer. When I got back that DVD has worked for a while then stopped. Downloaded the software and drivers to try to fix the problem, but no luck. I tried an external but computer dvd for some reason any will not recognize the unit. I also have a legacy of clickfree backup, but now that my dvd works not the clickfree will not work. I have also reinstalled the dvd but that did not work. any ideas?

  Hello

  ·         What operating system do you use?

  Follow these methods and check if that helps.

  Method 1:

  Run this Microsoft fixit t tool and check if it helps.

   

  Your CD or DVD drive cannot read or write media

  http://support.Microsoft.com/mats/cd_dvd_drive_problems

  Method 2:

  I suggest you follow the troubleshooting steps form the article and check if it helps.

  Your CD or DVD drive is missing or is not recognized by Windows or other programs

  http://support.Microsoft.com/kb/314060

• Hi, I installed Lightroom and Photoshop, but the application does not launch when I try to start it. It shows 'OPEN' in the desktop menu. It doesn't show anything (busy for a few seconds) if I try to run it from the windows menu. Is there something else t

  That's what I see (blelow), but it shows on busy for a few seconds and no application is started:

  

  Hi bennievivier,

  • Not really necessary, can you please check your task manager, if somehow PS running in the background, also please try to put an end to all the process Adobe running in the background and then open PS and LR both and see if they launch.
  • Also, be sure that your Windows operating system is up-to-date.
  • If it still doesn't work then please try provide full permissions on all folders of adobe.

  Concerning

  Rohit

• My computer lag / freezes for a few seconds then starts to work again and get pop ups, I have never before.

  For example, while I am typing my computer freezes for a few seconds and I can't type or will not move the mouse. This lasts a few seconds but then starts to work again ok. This happens on every 10 minutes or so... enough to get on my nerves, especially at the time of the school. How can I fix? I also get a pop-up whenever I go to a new page. How can I stop this as well? I'd be so grateful for any help on this matter.

  Thanks, Elsie

  Hello

  What the popup say or lead?

  Search for malware, and then run the cleaning as described below.

  --------------------------------------------------------------------------

  If you need search malware here's my recommendations - they will allow you to
  scrutiny and the withdrawal without ending up with a load of spyware programs running
  resident who can cause as many questions as the malware and may be more difficult to detect as the
  cause.

  No one program cannot be used to detect and remove any malware. Added that often easy
  to detect malicious software often comes with a much harder to detect and remove the payload. Then
  its best to be thorough than paying the high price later now too. Check with them to one
  extreme overkill point and then run the cleaning only when you are sure that the system is clean.

  It can be made repeatedly in Mode safe - F8 tap that you start, however, you must also run
  the regular windows when you can.

  Download malwarebytes and scan with it, run MRT and add Prevx to be sure that he is gone.
  (If Rootkits run UnHackMe)

  Download - SAVE - go to where you put it-right on - click RUN AS ADMIN

  Malwarebytes - free
  http://www.Malwarebytes.org/

  Run the malware removal tool from Microsoft

  Start - type in the search box-> find MRT top - right on - click RUN AS ADMIN.

  You should get this tool and its updates via Windows updates - if necessary, you can
  Download it here.

  Download - SAVE - go to where you put it-right on - click RUN AS ADMIN
  (Then run MRT as shown above.)

  Microsoft Malicious - 32-bit removal tool
  http://www.Microsoft.com/downloads/details.aspx?FamilyId=AD724AE0-E72D-4F54-9AB3-75B8EB148356&displaylang=en

  Microsoft Malicious removal tool - 64 bit
  http://www.Microsoft.com/downloads/details.aspx?FamilyId=585D2BDE-367F-495e-94E7-6349F4EFFC74&displaylang=en

  also install Prevx to be sure that it is all gone.

  Download - SAVE - go to where you put it-right on - click RUN AS ADMIN

  Prevx - Home - free - small, fast, exceptional CLOUD protection, working with others
  security programs. It is a single scanner, VERY EFFICIENT, if it finds something to come back
  here or use Google to see how to remove.
  http://www.prevx.com/   <-->
  http://info.prevx.com/downloadcsi.asp  <-->

  Choice of PCmag editor - Prevx-
  http://www.PCMag.com/Article2/0, 2817,2346862,00.asp

  Try the demo version of Hitman Pro:

  Hitman Pro is a second scanner reviews, designed to save your computer from malicious software
  (viruses, Trojans, rootkits, etc.). who infected your computer despite safe
  what you have done (such as antivirus, firewall, etc.).
  http://www.SurfRight.nl/en/hitmanpro

  --------------------------------------------------------

  If necessary here are some free online scanners to help the

  http://www.eset.com/onlinescan/

  New Vista and Windows 7 version
  http://OneCare.live.com/site/en-us/Center/whatsnew.htm

  Original version
  http://OneCare.live.com/site/en-us/default.htm

  http://www.Kaspersky.com/virusscanner

  Other tests free online
  http://www.Google.com/search?hl=en&source=HP&q=antivirus+free+online+scan&AQ=f&OQ=&AQI=G1

  --------------------------------------------------------

  After the removal of malicious programs:

  Also follow these steps for the General corruption of cleaning and repair/replace damaged/missing
  system files.

  Start - type this in the search box-> find COMMAND at the top and RIGHT CLICK – RUN AS ADMIN

  Enter this at the command prompt - sfc/scannow

  How to fix the system files of Windows 7 with the System File Checker
  http://www.SevenForums.com/tutorials/1538-SFC-SCANNOW-Command-System-File-Checker.html

  How to analyze the log file entries that the Microsoft Windows Resource Checker (SFC.exe) program
  generates in Windows Vista cbs.log
  http://support.Microsoft.com/kb/928228

  Also run CheckDisk, so we cannot exclude as much as possible of the corruption.

  How to run check disk in Windows 7
  http://www.SevenForums.com/tutorials/433-disk-check.html

  -----------------------------------------------------------------------

  If we find Rootkits use this thread and other suggestions. (Run UnHackMe)

  http://social.answers.Microsoft.com/forums/en-us/InternetExplorer/thread/a8f665f0-C793-441A-a5b9-54b7e1e7a5a4/

  ======================================

  If necessary AFTER THAT you are sure that the machine is clean of any malware.

  How to do a repair installation to repair Windows 7
  http://www.SevenForums.com/tutorials/3413-repair-install.html

  I hope this helps.

  Rob Brown - MS MVP - Windows Desktop Experience: Bike - Mark Twain said it right.

• Laptop will not load web pages for a few minutes after sleep

  HP M6-1045dx, Windows HP 64, SP1

  After waking from sleep, my computer does not load web pages for a few minutes after waking up from his sleep.

  I've tried to follow several times:

  Disabled/enabled wireless adapter

  Wireless adapter uninstalled/reinstalled software both links to HP and Intel.

  Did a clean install of the operating system.

  I sit within eight feet from my wireless router.  Another laptop connects instantly to sleep with no isses.

  Thank you.

  Download and install the latest Intel Wireless driver

  Intel Wireless Driver version 15.2.0.19

  I checked your BIOS driver. It is already updated to F.25. I would like to know what are the results with the new wireless driver.

• YouTube videos are green for a few seconds when they start, quickly moving and switch between fullscreen and windowed mode

  suddenly, last night something happened with youtube. whenever I run a video on youtube its green for a few seconds, then it goes back to normal. its also green when I fast forward/jump and when I change between full screen and windowed. I linked to a screenshot of how it looks as if I googled this problem I find something else where people get a green screen but no picture at all and that it lasts the entire video.

  I tried updating the drivers for my graphics card. I tried to play on my nvidia card rather than use my intel graphics hd 4600 and still got the same result, but instead to get a green image, it was really dark almost black. I also tried to reinstall flash even downgrade to an earlier version, but nothing does. and the strange thing is that I only have this problem on youtube and only through firefox so I even tried reinstalling firefox, but that did not work either

  I found 2 things of this kind of help.
  the first solution is to disable hardware acceleration, but instead to get a green image for a few seconds, image frozen for the same period of time and then play and she is like when its Green, when I start it up, jump and change to full or windowed.

  the second solution I found in support for mozilla, to change the HTML5 player. But even if this player works great I really like it. for some reason any the break from the drive when I change between full screen and windowed mode and I don't like these pop-up windows get you that its now in full screen and I can press ESC to quit.

  These are just little things, but I would like to return the standard player.
  If anyone knows anything that could help me with this please let me know.

  This is the screenshot:
  http://i1285.Photobucket.com/albums/A584/JimZiii/1_zpsb3d41a08.PNG

  What a little wild speculation?

  YouTube uses a technology that has chopped videos in individual pieces, which is probably video serve more easily, but could create more opportunities for issues when moving in the video. There is an add-on called Center of YouTube that allows you to disable this technology and back to the days of one big file. Might be worth a try.

  • Preload YouTube videos while disabling playback Dash - Lifehacker
  • Center of YouTube - Add - ons for Firefox

• Firefox hangs for a few seconds when you try to suspend videos or skip commercials on Youtube.

  Hi all!

  My problem is that YouTube freezes for a few seconds when I try to put a video on a break or skip or run advertisements. The video freezes while the sound continues to play until, at the end of say 5 seconds, youtube is finally what I tell it to do.

  This does not occur if the video is embedded on another website, nor is it on Vimeo, Dailymotion etc. I can play YouTube videos perfectly when you use Chrome, IE and Windows 8 Youtube application that I have.

  After the first freeze all commands start works great, at least until I've opened a new video.

  I noticed that many people are having problems with youtube while using firefox and I have tried a few things:
  -uninstalling and reinstalling flash and java
  -from Firefox in safe mode
  -using the different antivirus software
  -Reinstall Firefox

  I read that this could be a problem with the whole Google being all buddy-buddy with Adobe thing, but I'm skeptical.

  So, is it possible to get YouTube working properly?

  Thank you!

  You can check for problems with the latest version of the Flash plugin and try these:

  • disable an eventual extension of the browser for Firefox Plugin RealPlayer Record and if installed RealPlayer update
  • Disable protected mode in the plugin Flash (Flash 11.3 + on Windows Vista and later versions)
  • turn off hardware acceleration in the Flash plugin
  • http://KB.mozillazine.org/Flash#troubleshooting

• Satellite P750/P755 - screen freezes for a few seconds a game

  Hello

  Evreytime I play a game that's not mater if it is a new game or old game all the time that I have the screen for a few seconds practly freez ruin all games...

  I try to reinstal windows I did all the updates from Nvidia to sounds, etc...

  I tried to reinstal the game, I tried evreything I could find on the internet but the problem still persist.
  The laptop is going to simply lost and some time ago he worked very very good with maxim in the game settings.
  0 lag!

  The laptop was clean recently, please, any help will be welcome!
  Sorry for my French, there will be little things on my laptop the DxDiag.

  I don't know what to do more, but I don't know that it must be something simple...

  ------------------
  Information System

  Time of this report: 14/02/2014, 22:38:59
  Computer name: LEROS-PC
  Operating system: Windows 7 Home Premium 32 - bit (6.1, Build 7601) Service Pack 1 (7601.win7sp1_gdr.130828) - 1532
  Language: English (regional setting: English)
  System manufacturer: TOSHIBA
  System model: P750 SATELLITE
  BIOS: BIOS Date: 13/07/11 15:48:44 worm: FRIEND APTIO 2.10
  Processor: Intel (r) CPU of Core i5 - 2410M 2.30 GHz (4 CPUs), ~2.3GHz
  Memory: RAM 8192MB
  Available OS memory: 3236MB RAM
  Page file: 1707MB used, 47 to 63 MB of available space
  Windows Dir: C:\Windows
  DirectX version: DirectX 11
  DX setup parameters: not found
  DPI setting: Using System DPI
  System DPI setting: 96 DPI (100%)
  DWM DPI Scaling: disabled
  DxDiag Version: 6.01.7601.17514 32 bit Unicode

  Hi guy,

  I think that it of difficult to say exactly why the screen / the game freezes for a few seconds during the game. There are too many different factors that can affect the game, laptop performance.

  For example the GPU performance can be clocked down due to a higher temperature or memory might be full and the data has be moved to the HARD disk using the paging file.
  Maybe the CPU's load a few seconds due to various processes that run in the background (anti-virus, etc.)
  Maybe its GPU driver problem. Who knows

  I think first of all you must disable all security and antivirus software that could run while you play a game. But do this only while game.
  You can also try to reduce the graphic details in the game settings.

• Satellite P200-140 - Toshiba Logo appears for a few seconds, then disappears

  I have a problem simular with a P200-140.

  When he starts the Toshiba Logo appears for a few seconds, then disappears, if I tilt the screen I can see that the image is there but the screen does not light.

  I used my projector SVGA output and which works very well. Sometimes after having started a few times the display returns and will then work fine but disappear again without warning especially if yiou closes the screen.

  I don't know if it's maybe a switch problem?
  Y at - it a contact microphone that could stick when you close the lid?

  I tried deleting and reinstalling display drivers and booting in safe mode, neither makes the difference.

  Hi Mortiss,
  Maybe the backlight of the lcd screen went... (I don't think)
  or broken wires... (!)
  or the lid switch is defectiv (rare)

  ask a servicepartner to help...

  deassemble unity... or watch this will kill your warranty...

• My Aspire S7 stops responding for a few seconds from time to time, randomly

  Aspire i53317 S7 256 G (2 * 128)

  When using, the system stop meet occasionally for a few seconds, sometimes more than 10 seconds, click of the mouse and keyboard does nothing, while it is happening, after it is passed, it works very well for a random delay then reappears.

  I can't reproduce the problem by a fixed usage model. It seems random and happens to different software.

  I trid to reinstall the system settings-> change the PC setting-> General-> delete everything and reinstall windows. and it still happens.

  any help or any suggestion where the problem may be? I need more information before to send it to ACER, I won't return for a few days and then be said «we have no problem...» »

  Thank you

  Kai

  I have had a look and it seems that your model does not use technology Intel Rapid Storage Technology. However, I can cheat me so check your event log for the error I described in my first post. If you have cleared your newspapers, wait for the problem to appear once more and then check again. If you do not see the error that this correction will not help you (application do nothing other that add clutter to your registry).

  A bit of history...

  Intel Rapid Storage Technology (IRST) added originally entered in the registry during installation. Since version 10, Intel changed the application to use the settings by default, embedded in the program - registry entries are no longer used by default. However, TSRI seems to check the entries and if necessary, he would use. The problem arises that if version 10 is a new installation and the default settings do not meet your equipment needs. When this is the case, you might well live temporary blockage. It wasn't a problem if you upgraded of course you would have entries in your registry database.

  The solution is to simply add the appropriate entries.

  It is an export of the Scriptures that I added:

  ----------------

  Windows Registry Editor Version 5.00

  [HKEY_LOCAL_MACHINE\SYSTEM\CurrentControlSet\services\iaStor\Parameters]

  "BusType" = dword:00000003

  [HKEY_LOCAL_MACHINE\SYSTEM\CurrentControlSet\services\iaStor\Parameters\Port0]

  "LPM" = DWORD: 00000000

  "LPMSTATE" = DWORD: 00000000

  "MISCONDUCT" = DWORD: 00000000

  "LPMDSTATE" = DWORD: 00000000

  [HKEY_LOCAL_MACHINE\SYSTEM\CurrentControlSet\services\iaStor\Parameters\Port1]

  "MISCONDUCT" = DWORD: 00000000

  "LPM" = DWORD: 00000000

  "LPMDSTATE" = DWORD: 00000000

  "LPMSTATE" = DWORD: 00000000

  ----------------

  Copy the lines between the '-' (but do not include them).

  Paste it into a text file and finally, change the .txt .reg file type

  Double-click the file and follow the instructions to add to the registry.

  Note that I have included the second entry (Port1) because I have a DVD player. Honestly, I don't know if I needed to do.

  You should try this? Well, that's a decision for you! You can do a bit of reading (or a lot!) on the Intel site to better understand.

  All I can really tell you is that I had the problem of gel (10 to 20 seconds or more) as well as the error in the log. After I made the registry changes I have * never * had a freezing episode since. Nor I have seen the error reappears in my journal.  My machine (M5-581TG) is lightning fast, so I'm more than happy that the fix has had no adverse effect.

  Finally, if you decide to give it a go, I'd say you first check your registry database, and if you can't find this entry, export them before you add mine so you can put back them if need be.

• Try power upward and he would keep a black screen for a few seconds then turn off and turn on and repeat until I've done a hard stop. I got a message on the svchost.exe

  Original title: help - csvhost.exe and problems to start

  My sons laptop has problems - try to turn on and it would maintain a black screen for a few seconds and then turned off and turn and repeat until I've done a hard stop.  I am able to navigate to the top after repeated attempts.  I could take a quick and complete hard drive test and it passed... Finally, I restored to factory and spent the last 8 hours going through the update process.  It works fine and restart without problems until recently - I followed the instructions to reboot to perform an update, but he had served in the "shutting down" mode for almost an hour I did a firm hard down.  It took a few attempts so he could begin after that, and when I did I had a message on the svchost.exe and thought that might have something to with him... found a site that has a download that is supposed to fix errors and am curious if that is recommended or whether there is another solution or possible make my misfortunes.  The site is: http://www.exe-error-advisor.com/svchost-exe.  I don't know what's happening - the computer works very well when it turns - to be fair, I did also made an update of "HP Total Care Advisor" who has nothing and after I rebooted I could not make it work... "HP Advisor has stopped working"

  Any ideas or advice?

  replied in the other thread

  http://answers.Microsoft.com/en-us/Windows/Forum/Windows_7-system/help-svchostexe-and-problems-booting/cd6ef667-7833-4f34-B976-ffded620a208

• Access my flash for a few seconds.

  Hello

  I can't speak English very well if I have a problem I apologize.

  In my last question have problem to access my USB key, I can't fix it. For this, I download Win7 (V 6.1 build 7601). After installation, I use only my hard external (it's working). Today, when connect my USB I access for a few seconds. I have prepared a video that you can see my problem.

  How can solve this problem?

  Hey,.

  I hope this will help you!

  -The information to Microsoft Support page can help you, click here

  Have a nice day
  Note: Do not post your personal information.

• Computer freezes for a few seconds

  My computer seems to freeze every 3-5 minutes for a few seconds (by what I can say, I can always communicate with things on the desktop, but nothing seems to move). I scanned my computer for malware (Nothing found) and my hard drive does not need to defragment.

  Why is this happening?

  I really appreciate the help.
  Curiously, just a simple reboot fixed it.

  Perhaps a task did not work properly and was playing with the GPU?
  :/

  In any case, thank you.