DVD stopped working got external dvd but no not disks work runs for a few seconds then stops

Similar Questions

• Try power upward and he would keep a black screen for a few seconds then turn off and turn on and repeat until I've done a hard stop. I got a message on the svchost.exe

  Original title: help - csvhost.exe and problems to start

  My sons laptop has problems - try to turn on and it would maintain a black screen for a few seconds and then turned off and turn and repeat until I've done a hard stop.  I am able to navigate to the top after repeated attempts.  I could take a quick and complete hard drive test and it passed... Finally, I restored to factory and spent the last 8 hours going through the update process.  It works fine and restart without problems until recently - I followed the instructions to reboot to perform an update, but he had served in the "shutting down" mode for almost an hour I did a firm hard down.  It took a few attempts so he could begin after that, and when I did I had a message on the svchost.exe and thought that might have something to with him... found a site that has a download that is supposed to fix errors and am curious if that is recommended or whether there is another solution or possible make my misfortunes.  The site is: http://www.exe-error-advisor.com/svchost-exe.  I don't know what's happening - the computer works very well when it turns - to be fair, I did also made an update of "HP Total Care Advisor" who has nothing and after I rebooted I could not make it work... "HP Advisor has stopped working"

  Any ideas or advice?

  replied in the other thread

  http://answers.Microsoft.com/en-us/Windows/Forum/Windows_7-system/help-svchostexe-and-problems-booting/cd6ef667-7833-4f34-B976-ffded620a208

• My computer lag / freezes for a few seconds then starts to work again and get pop ups, I have never before.

  For example, while I am typing my computer freezes for a few seconds and I can't type or will not move the mouse. This lasts a few seconds but then starts to work again ok. This happens on every 10 minutes or so... enough to get on my nerves, especially at the time of the school. How can I fix? I also get a pop-up whenever I go to a new page. How can I stop this as well? I'd be so grateful for any help on this matter.

  Thanks, Elsie

  Hello

  What the popup say or lead?

  Search for malware, and then run the cleaning as described below.

  --------------------------------------------------------------------------

  If you need search malware here's my recommendations - they will allow you to
  scrutiny and the withdrawal without ending up with a load of spyware programs running
  resident who can cause as many questions as the malware and may be more difficult to detect as the
  cause.

  No one program cannot be used to detect and remove any malware. Added that often easy
  to detect malicious software often comes with a much harder to detect and remove the payload. Then
  its best to be thorough than paying the high price later now too. Check with them to one
  extreme overkill point and then run the cleaning only when you are sure that the system is clean.

  It can be made repeatedly in Mode safe - F8 tap that you start, however, you must also run
  the regular windows when you can.

  Download malwarebytes and scan with it, run MRT and add Prevx to be sure that he is gone.
  (If Rootkits run UnHackMe)

  Download - SAVE - go to where you put it-right on - click RUN AS ADMIN

  Malwarebytes - free
  http://www.Malwarebytes.org/

  Run the malware removal tool from Microsoft

  Start - type in the search box-> find MRT top - right on - click RUN AS ADMIN.

  You should get this tool and its updates via Windows updates - if necessary, you can
  Download it here.

  Download - SAVE - go to where you put it-right on - click RUN AS ADMIN
  (Then run MRT as shown above.)

  Microsoft Malicious - 32-bit removal tool
  http://www.Microsoft.com/downloads/details.aspx?FamilyId=AD724AE0-E72D-4F54-9AB3-75B8EB148356&displaylang=en

  Microsoft Malicious removal tool - 64 bit
  http://www.Microsoft.com/downloads/details.aspx?FamilyId=585D2BDE-367F-495e-94E7-6349F4EFFC74&displaylang=en

  also install Prevx to be sure that it is all gone.

  Download - SAVE - go to where you put it-right on - click RUN AS ADMIN

  Prevx - Home - free - small, fast, exceptional CLOUD protection, working with others
  security programs. It is a single scanner, VERY EFFICIENT, if it finds something to come back
  here or use Google to see how to remove.
  http://www.prevx.com/   <-->
  http://info.prevx.com/downloadcsi.asp  <-->

  Choice of PCmag editor - Prevx-
  http://www.PCMag.com/Article2/0, 2817,2346862,00.asp

  Try the demo version of Hitman Pro:

  Hitman Pro is a second scanner reviews, designed to save your computer from malicious software
  (viruses, Trojans, rootkits, etc.). who infected your computer despite safe
  what you have done (such as antivirus, firewall, etc.).
  http://www.SurfRight.nl/en/hitmanpro

  --------------------------------------------------------

  If necessary here are some free online scanners to help the

  http://www.eset.com/onlinescan/

  New Vista and Windows 7 version
  http://OneCare.live.com/site/en-us/Center/whatsnew.htm

  Original version
  http://OneCare.live.com/site/en-us/default.htm

  http://www.Kaspersky.com/virusscanner

  Other tests free online
  http://www.Google.com/search?hl=en&source=HP&q=antivirus+free+online+scan&AQ=f&OQ=&AQI=G1

  --------------------------------------------------------

  After the removal of malicious programs:

  Also follow these steps for the General corruption of cleaning and repair/replace damaged/missing
  system files.

  Start - type this in the search box-> find COMMAND at the top and RIGHT CLICK – RUN AS ADMIN

  Enter this at the command prompt - sfc/scannow

  How to fix the system files of Windows 7 with the System File Checker
  http://www.SevenForums.com/tutorials/1538-SFC-SCANNOW-Command-System-File-Checker.html

  How to analyze the log file entries that the Microsoft Windows Resource Checker (SFC.exe) program
  generates in Windows Vista cbs.log
  http://support.Microsoft.com/kb/928228

  Also run CheckDisk, so we cannot exclude as much as possible of the corruption.

  How to run check disk in Windows 7
  http://www.SevenForums.com/tutorials/433-disk-check.html

  -----------------------------------------------------------------------

  If we find Rootkits use this thread and other suggestions. (Run UnHackMe)

  http://social.answers.Microsoft.com/forums/en-us/InternetExplorer/thread/a8f665f0-C793-441A-a5b9-54b7e1e7a5a4/

  ======================================

  If necessary AFTER THAT you are sure that the machine is clean of any malware.

  How to do a repair installation to repair Windows 7
  http://www.SevenForums.com/tutorials/3413-repair-install.html

  I hope this helps.

  Rob Brown - MS MVP - Windows Desktop Experience: Bike - Mark Twain said it right.

• When I connect my laptop L300D to my LCD tv using VGA to VGA it works fine for a few minutes then the screens n that the laptop and TV started blinking on and outside. Can someone advise please.

  When I connect my Toshiba L300D laptop to my Samsung 40 inch lcd tv using vga to vga connection it works fine for a few minutes. Then the screens on the laptop and the TV start to turn on and turn off, also jumps around cursor. Can someone tell me what is the problem and how to correct.

  Hello

  Try changing the VGA cables and check if it helps.

  If the problem persists, then I suggest you to update the firmware.

  Note: BIOS change / semiconductor (CMOS) to complementary metal oxide settings can cause serious problems that may prevent your computer from starting properly. Microsoft cannot guarantee that problems resulting from the configuration of the BIOS/CMOS settings can be solved. Changes to settings are at your own risk.

• Click and drag the work for a few seconds then the work stoppages?

  Hi all

  See this video of drag and drop doesn't work does not in creative suite - YouTube https://youtu.be/QODs8fF84g4 that shows the problem.

  I have the same problem with Indesign, but not with the first where I can drag and drop, drag to prune, drag the elements, clips, etc.

  In photoshop I can click and drag in the layer order resort or to crop an image, etc., but after a few seconds, these functions do not work, and nothing happens at all when you click to drag. Layers are not locked, this happens with any project, no image, no matter if I open the program as an administrator or not. It is a Windows 10 computer and I'm on their beta program, but drag and drop works fine in windows/creation/other applications.

  What this may be? It worked fine a month ago.

  Help much appreciated.

  Select this option.

  The fact that you can't move the floating panels might indicate a problem with the mouse capture. When a mouse down is detected capture us the mouse and drag the user interface as you move the mouse.

  You use all third party tools that interact with the mouse?

  If you hold down the "shift" key when launching Photoshop, you can disable third-party plug-ins 3. You see the problem when you run without 3rd party plug-ins enabled?

  Jesper

• my cd player can read cd/DVDs, but will not recognize a cd for copy/writng? Help

  I have 2 drives, both reading and playing, but both say "insert disc" and will not recognize when I insert discs

  try to copy videos from hard disk and trying to copy music from the hard drive.

  suggestions?

  Thank you

  Grant

  The following links may be worth a visit:

  (982116) your CD or DVD drive is missing
  or is not recognized by Windows or other programs
  http://support.Microsoft.com/kb/982116
  (Windows XP / Windows Vista / Windows 7)

  Your CD or DVD drive cannot read or write media
  http://support.Microsoft.com/GP/cd_dvd_drive_problems

  Good luck...

• I'm taking classes online and since the new UPGRADE to 4, I can't download PDFs from the site unless they are less than 2 MB. It downloads for a few seconds then stops and no message appears.

  I connect to online courses. I click on the link to a PDF on the site. It gives the message it is downloading, then stops. With less than 2.0 MB PDF files load, but nothing more.

  No chance that your school uses Blackboard / WebCT?
  
  If so, Firefox 4.0 has not been certified as being compatible with this software.

  See this page in Blackboard KB to see which version of Firefox is certified for the version of Blackboard Learning System Vista or THIS used in your school.
  
  http://KB.Blackboard.com/pages/ViewPage.action?PageID=45581177

• First pro works fine for about 30 seconds, then playback starts lagging and insight cannot be rendered

  Hello.

  When I run the pro first, everything works fine. Playback is smooth, and the timeline can be préaffichée.

  After about half a minute, playback starts lagging badly, audio lags too sometimes. If I choose "sequence > make the whole work area", I get "error video preview. Movie compilation error. Unknown error. »

  The lag is so bad that the software is virtually unusable.

  The last project that I'm a 5s 2 clips, so it is really light, also the same problem persists in other projects.

  Made real works very well.

  After Effects works very well.

  I tried reinstalling the software several times, clear the cache, move the cache to different disks and uninstalling software with cloud creative cleaner.

  I have an Intel Core i7 - 6700K @ 4.00 Ghz cpu

  960 NVIDIA graphics card

  32 GB of ram

  I'm in first pro CC 2015.2

  Any help would be much appreciated, I have no idea how to do this (as I'm not a computer guru, so there might be something obvious I missed)

  Thanks in advance

  I've now updated to cc 2015.3, fingers crossed...

  Hi oskaria,

  You have the same problem on Premiere Pro 2015.3?

  You have enough disk space in the drive?

  Have you tried to change the only software video rendering engine?

  Thank you

  Regalo

• I hear the sound when I download but do not see the image until a few seconds later, where can I go to diagnose this problem? r

  I hear the sound of the movie I am streaming before you see the characters who speak. Can I solve this problem by going somewhere in the Control Panel, or I have to go to a certain site?

  A moderator has moved this thread to Windows pictures and video Forum.

  You are able to view multimedia clips continuously successfully with other media players?

  To ensure that the player can try to download codecs automatically, you must maintain Internet access while playing the file, and your Internet security must be set to medium. In addition, you must be logged in as an administrator or as a member of the Administrators group. Finally, follow these steps in Windows Media Player:

  1. Click the arrow below the now playing tab, and then click Other Options. 2. On the Player tab, select the check box automatically download codecs . http://support.Microsoft.com/kb/291818 Codecs: Frequently asked questions http://Windows.Microsoft.com/en-us/Windows7/codecs-frequently-asked-questions Media Player Codec Pack http://download.CNET.com/Media-Player-codec-pack/3000-13632_4-10749065.html Have you tried to uninstall the audio driver in Device Manager? Start > right click on computer Select manage Select Device Manager Click on the + next to sound, video and game controllers Right-click on the driver and select uninstall Close the Device Manager Restart the computer You could also try uninstalling WMP, restart and reinstall WMP How to uninstall Windows Media Player 11 in Windows XP http://support.Microsoft.com/kb/934372

• M535 Logitech Bluetooth Mouse works for a few minutes then stops working on

  I have a new mouse BT M535 and it works for a few moments then stops working.

  I use Windows 7 Professional Service Pack 1 with my Dell Precision M4800 Intel Core i7-4900MQ CPU @ 2.80 GHz, 16.0 GB of Ram, 64-bit Op

  Does anyone know how to fix this? Simply, it stops working and you must uninstall and then reinstall but does the same thing. We tend to Office I know sometimes things blocks as well. Any comments would be useful.

  Thank you in advance.

  Thanks for the reply. I was able to solve the problem by returning the BT of Logitec mouse and buy a mouse Microsoft 3600 BT. Works fine now.

• Messenger on Mac just disconnects and says service unavailable or something, but it works well for a few weeks.

  Messenger on MAC disconnects and says service unavailable or something, but it just works well for a few weeks... really annoying, please help!

  original title: WHY IS MSN MESSENGER 8 MAC NOT WORK?

  Hello

   
  You can display the query in the links provided to get better assistance.
  http://mac2.Microsoft.com/help/Office/14/en-us/Messenger/
  http://mac2.Microsoft.com/help/Office/14/en-us/Messenger/category/9cd3c59c-3a5e-441b-ac69-3318ea0398a7

• Illustrator: 'nodes' on the corners of the images or shapes are red instead of open boxes &amp; Icannot resize these elements by dragging the nodes.  I just got the latest version of Illustrator and it worked fine for a few weeks and now I can't do it aga

  Illustrator: 'nodes' on the corners of the images or shapes are red instead of open boxes & Icannot resize these elements by dragging the nodes.  I just got the latest version of Illustrator and it worked fine for a few weeks and now I can't do it again on the right.

  View > Show bounding solve?

• My Aspire S7 stops responding for a few seconds from time to time, randomly

  Aspire i53317 S7 256 G (2 * 128)

  When using, the system stop meet occasionally for a few seconds, sometimes more than 10 seconds, click of the mouse and keyboard does nothing, while it is happening, after it is passed, it works very well for a random delay then reappears.

  I can't reproduce the problem by a fixed usage model. It seems random and happens to different software.

  I trid to reinstall the system settings-> change the PC setting-> General-> delete everything and reinstall windows. and it still happens.

  any help or any suggestion where the problem may be? I need more information before to send it to ACER, I won't return for a few days and then be said «we have no problem...» »

  Thank you

  Kai

  I have had a look and it seems that your model does not use technology Intel Rapid Storage Technology. However, I can cheat me so check your event log for the error I described in my first post. If you have cleared your newspapers, wait for the problem to appear once more and then check again. If you do not see the error that this correction will not help you (application do nothing other that add clutter to your registry).

  A bit of history...

  Intel Rapid Storage Technology (IRST) added originally entered in the registry during installation. Since version 10, Intel changed the application to use the settings by default, embedded in the program - registry entries are no longer used by default. However, TSRI seems to check the entries and if necessary, he would use. The problem arises that if version 10 is a new installation and the default settings do not meet your equipment needs. When this is the case, you might well live temporary blockage. It wasn't a problem if you upgraded of course you would have entries in your registry database.

  The solution is to simply add the appropriate entries.

  It is an export of the Scriptures that I added:

  ----------------

  Windows Registry Editor Version 5.00

  [HKEY_LOCAL_MACHINE\SYSTEM\CurrentControlSet\services\iaStor\Parameters]

  "BusType" = dword:00000003

  [HKEY_LOCAL_MACHINE\SYSTEM\CurrentControlSet\services\iaStor\Parameters\Port0]

  "LPM" = DWORD: 00000000

  "LPMSTATE" = DWORD: 00000000

  "MISCONDUCT" = DWORD: 00000000

  "LPMDSTATE" = DWORD: 00000000

  [HKEY_LOCAL_MACHINE\SYSTEM\CurrentControlSet\services\iaStor\Parameters\Port1]

  "MISCONDUCT" = DWORD: 00000000

  "LPM" = DWORD: 00000000

  "LPMDSTATE" = DWORD: 00000000

  "LPMSTATE" = DWORD: 00000000

  ----------------

  Copy the lines between the '-' (but do not include them).

  Paste it into a text file and finally, change the .txt .reg file type

  Double-click the file and follow the instructions to add to the registry.

  Note that I have included the second entry (Port1) because I have a DVD player. Honestly, I don't know if I needed to do.

  You should try this? Well, that's a decision for you! You can do a bit of reading (or a lot!) on the Intel site to better understand.

  All I can really tell you is that I had the problem of gel (10 to 20 seconds or more) as well as the error in the log. After I made the registry changes I have * never * had a freezing episode since. Nor I have seen the error reappears in my journal.  My machine (M5-581TG) is lightning fast, so I'm more than happy that the fix has had no adverse effect.

  Finally, if you decide to give it a go, I'd say you first check your registry database, and if you can't find this entry, export them before you add mine so you can put back them if need be.

• Touchpad not working not for a few seconds after I touch it with your finger, then a more...

  I already tried SMC and reset the PRAM, but who doesn't. I found someone with such a similar problem (Trackpad doesn't work sometimes on MBP after upgrade OS X 10.8.2)

  but the measures that seem to work for them do not work for me.

  Thus, as described in the title. the touchpad works very well as long as I just touching with a finger, so scrolling with two fingers or by changing desktop computers do not work. the mouse freezes for a few seconds after I hit with 2 fingers. After about 3 seconds it starts working again.

  If there is someone with the same problem let me know!

  Technical specification:

  OS X El Capitan 10.11.6

  MacBook Pro (retina, 15 inch, mid-2015)

  Processor: 2.5 GHz Intel Core i7

  Memory: 16 GB 1600 MHz DDR3

  Video card: Intel Pro Iris 1536 MB

  flash memory: 500 GB

  I propose a date at a bar in engineering of the Apple store for a FREE evaluation.

  Ciao.

• My internet connection is lost at home after a few minutes. I re - turn on the wifi disabled, ten and it works again for a few minutes and then repeats. It works fine everywhere else?

  Relatively new MacBook OSX El Cap 11.4

  My internet connection is lost at home after a few minutes. I stop the wifi, then turn it back on and it works again for a few minutes and then repeats. It works fine everywhere else?

  Please see recommended settings of WiFi routers and access Apple points.

  Despite these recommendations, some routers will work better with the latest Mac models if you turn the radio 2.4 GHz mode in settings and only use the 5 GHz. Note, however, that very old devices Apple and some third-party devices can then not connect at all.

  Some third party routers have advanced that you may need to change the settings:

  The encryption algorithm must be AES.

  The group key interval must be 3200.

  I can't give you specific instructions on how to change these settings, because all routers are different. Refer to the documentation for the provider.