touchpad not working not not after mistakenly pressing the recovery button

Similar Questions

• Operating system does not stop. It continues to run after I pressed the close button.

  Operating system does not stop automatically.  Computer continues to run after I pressed the close button.

  Hi Solodeseo,

  Try method listed http://support.microsoft.com/kb/308029. Hope this will help.

• Increase in Wake - should not have to press the Home button to unlock

  Hi all

  I appreciate the work that the Apple development team did to iOS 10. Most of it's amazing as usual! BUT...

  The revival of the Wake feature needs an additional configuration option. In fact, some of us LIKE how quickly iOS 9 unlocks the phone and have the habit of hitting the power button to turn the screen to access the shortcut of the camera or using a finger not configured to press the Home button.

  That said, if I 'raises to Wake"my iPhone, having to press the Home button to complete the unlocking process is not intuitive. It must simply unlock and go to my home screen.

  As this MUST have been done intentionally, I think that you should give us the option attached to "Raise to Wake" function to enable or disable the duty press the Home button to unlock.

  Who else agrees? Thanks for your time!

  byersbw wrote:

  Who else agrees? Thanks for your time!

  Polls don't is not allowed here and probably wouldn't have much affect Apple's not read here.

  Submit your comments directly to Apple here:

  http://www.Apple.com/feedback

  Good luck.

• Satellite L550-1CW does not start by pressing the power button / stop

  I have a Toshiba Satellite L550-1cw that won't start, lights up when I press the power button all the lights at the front, the fan starts and he is looking for a HARD drive for about 2 seconds and then stops.

  I tried a new HARD drive, but the same happens.
  I was told that all this must be ignored and buy a new one that is not an option.
  I love this laptop and want to run again as this is the best I have ever owned.

  Help, please

  Andrew

  Can you give us more information on this vulnerability?
  You see something on the screen after pressing the power button?
  You can access the BIOS by pressing the F2 key immediately after switching on the device?

  Despite this whole issue, I think that if nothing is visible on the screen it could be a serious problem with one of the following: RAM modules, motherboard, CPU/GPU.

  From my experience the RAM memory modules are not very expensive (2nd hand might be good enough) and the replacement isn t very delicate in the case where the faulty memory causes this problem, the laptop could be set for a little money.

  But in case of problems of motherboard, laptop repair procedure could be very expensive.

• I bought Lightroom 5, can not download. Press the load button, nothing happens?

  I bought 5 Lightroom. Unable to download... Press the button and nothing happens?

  Same thing here.  Tried Chrome and Internet Explorer.  By clicking on the button download for shows me the creative cloud window, where I can choose to download all the apps CC, but Lightroom is not in this list!  Just signed up for Lightroom/Photoshop after the end of my trial.  I would like to have access to what I paid for!

• Update Adobe Muse settles not after having pressed the button update (was: why update does not?.)

  I see the screen, press update, but open the program without updating

  Hello

  Also, make sure that you have sufficient permissions to install or update applications on your computer.

  If the application has been installed by your IT team, I recommend you contact them first.

  Kind regards

  Akshay

• Menu start does not open by pressing the Start button once

  Why have I not press start twice to open the start menu? This happens only on one user, which confuses me. It is not the administrator, if this is useful.

  Disable sticky keys worked!

• HP DV6 6115TX UP STARTS NOT WHEN I PRESS THE POWER BUTTON / STOP NOTING HAPPENS

  LAPTOP: HP DV6 6115TX

  1. WITH THE BATTERY AND CONNECTED AC-

  WHEN I PRESS POWER BUTTON NOTHING HAPPNS ONLY INDICATOR LIGHT NEAR THE POWER SUPPLY BECOMES WHITE AND STAYS ON UNTIL I HAVE TO REMOVE THE BATTERY.

  2. WITH THE BATTERY ONLY

  WHEN I PRESS POWER BUTTON NOTHING HAPPNS ONLY INDICATOR LIGHT NEAR THE POWER SUPPLY BECOMES WHITE AND STAYS ON UNTIL I HAVE TO REMOVE THE BATTERY.

  Hello @HPDV6-6115TX ,.

  Welcome to the HP Forums!

  I understand that you laptop is not turning on.

  If the laptop has no power, other than the AC adapter connection indication, there is little that can be done.

  The adapter ring is HQ shows a white LED would suggest the adapter supply fine and offer pay-per-view mother, or at least the internal power connector. This means it is a flaw in the motherboard of the laptop and most likely requires a repair.

  You will want to check that the RAM and HARD drive are in place and connected, as well as internal power cable. You can do it by following your product Maintenance & Service Guide.

  HARD drive: Page 62.

  RAM: Page 66.

  Power cable: Page 83.

  If it does not, you will need to contact the HP support by phone for service options. You can contact HP Technical Support at 1-800-474-6836 in North America. For all other regions click here.

  Hope this helps!

• Buttons stop working after pressing the other buttons

  I have three buttons and when I click on the other, the first stops working (for example, no trace event and he traced back to the frame 'tab1'), but the third is still working. Then, when I press the third button the two first and second is no longer working. If I take the stop lines, buttons work fine. The following frames were simply stops on them.

  B1.addEventListener (MouseEvent.MOUSE_UP, b1Pressed);
  B2.addEventListener (MouseEvent.MOUSE_UP, b2Pressed);
  B3.addEventListener (MouseEvent.MOUSE_UP, b3Pressed);

  function b1Pressed(event:MouseEvent) {}
  trace ("hurry b1");
  gotoAndStop ("tab1");
  }

  function b2Pressed(event:MouseEvent) {}
  trace ("hurry b2");
  gotoAndStop ("tab2");
  }

  function b3Pressed(event:MouseEvent) {}
  trace ("hurry b3");
  gotoAndStop ("tab3");
  }

  Is there something obvious that I'm missing?

  Thanks for the ideas.

  Scott

  Check following things:

  1. All three buttons are available on all chassis. [tab1, tab2, tab3]
  2. There is no key between the two images.
  3. If there are key frames are of course you have buttons on the separate layer where there is no frames keys from the beginning to the end.
  4. If you have to have keyframes for the buttons then assign the event listener once more on each keyframe. [as when you insert a keyframe, gets a new bifurcation place]

• P1102 - why I have to press the power button before printing

  Hello

  I was wondering if anyone else knows how to avoid this problem. We have a P1102 connected via USB on Win 7 64 bit.

  Is there a setting somewhere that allows us to not have to press the power button on the printer before printing. It is now connected to the pc. The pc is turned off at night.

  It is very annoying to have to push the button before printing. This may sound trivial, but our old Hp laserjet 1100, only has been replaced with this P1102 as the new pc have no place for a parallel port card, and you never had to press the power button before printing with that, this feels like a step and is very disappointing.

  Thanks in advance.

  It seems that the printer software is not save the auto power off feature is set to never.  I would definitely try update the internal firmware of the printer to see if updating automatic stop is set to never work.

  Click here to access the download page for the Laserjet Firmwares.  Select the P1100 series in the drop-down list.

  This should be done so that a USB cable to connect the printer and the PC.  I would like to know if the firmware is able to get the printer to stay alive.

• How to remove the default save alert by pressing the "back" button

  Hi all

  Scenario: I have a screen in which, after I press the back button, the default alert box appears with the options "save, delete, cancel. How do I remove this menu?

  I tried to find it on the forum, but I guess that I do not use the search words to the right. Sorry for starting a new thread, in case it is a solved problem.

  Override the onSavePrompt method in your screen class

  and return true;

  protected boolean onSavePrompt() {
          return true;
  
      }
  

• Firefox 4 does not save form data after sending form and pressing the previous button

  Firefox 4 does not save form data after sending form and pressing the back button... It's very annoying that it erases all data. It worked fine on FF3.

  See:

  • Firefox or tools > Options > privacy > History: "don't forget to search and form history."
  • Check if Firefox automatically fills in forms

• PC does not start when you press the power button, after that starts automatically as a ghost!

  I have HP Pavilion a6030in, my pc does not start when I press the power button / stop ther, but she starts automatically after some time after that, it works fine.

  Even once when I closed and leave it for a while and still the problem is not resolved.

  Help, please

  I solved the problem

• Why Satellite Pro A300 does not start when you press the power button?

  Suddenly my new Satellite Pro A300 does not start correctly when you press the power button. The situation is the following: when I press the power button is displayed the opening of Toshiba (Leading Innovation) and the disappers image quickly. Then there is a black screen for about 30 seconds. There is a rectangular frame with the text Microsoft Corporation under. And nothing happens however long wait.

  In order to get with the trial starting I then shut down the computer by pressing the power button until the computer turns off. ("The hard way to close")
  Now, I press the power button shortly to turn on the computer. Then, the computer starts normally with the photo to open Toshiba and after a few seconds, I wonder to open the computer in safe mode or in normal mode. I now choose to open in normal mode and the computer opens normally and is ready to work.

  What should I do to get a normal departure procedure?

  When the laptop starts normally (after choosing normal mode) stop your laptop properly using START > shut down option. Next launch should be normal.

  When the OS is moving towards the low irregularly will always ask you how to start this new (secure or normal mode).
  The same thing happen on my Satellite A300.

• Two Macbook Pro, both does not start up, when I press the power button, I hear two disc bit Caryl, I see little light on the front on the displasy release button, black screen, no edge

  It was weird because I've NEVER had two computers have the same problem before. They are the model 2008 2.2 Ghz Core 2 Duo, 6 g of RAM, models of 128 GB of hard drive, the two Yosemite running, both had new hard drives, cables, batteries and RAM installed OWC (Apple approved reseller) and I use Macs for at least 20 years. In about a week, one just blacked out while sitting on my desk doing nothing, the other does the same on a week later. When I press the power button, I hear the drive hard hum twice, then all I get is the little light on the screen release button, that's all. Black screen. fails, nothing. I can press the power button and it will fit off the coast. Is it possible that some of them have infected somehow, or possibly send me the malware that has infected my system? I would not normally only, but for all of them to go down to one right after the other with the same problem just made me think, it must be the same cause, but what?  I had been in a war of fire recently with very ugly people, and I've never seen two Macs have the same exact problem in a row like that right.

  I took readers on the Macbook Pro, put them on sleds and threw them in my PowerMac, and both seemed fine, no problem, started well upward, ran utility disk on them, no problem, so I started to the checklist. Reset the PRAM. Nothing. SHIFT key at startup. Nothing. D at the start. Nothing. V order at startup. nothing. I wouldn't mind even their evisceration and making a portable useful with the parts of the two, but until I find out what the problem is, what can I do?

  If anyone has any suggestions, I would really appreciate it, I've supported every button I can think at the start, tried an inch USB key, boot and disk, this is the same Caryl bit both of the car, no chime, black screen, that's all.

  Thanks for your help.

  Damicon999 wrote:

  Is \Is possible for someone they have infected somehow, or possibly send me the malware that has infected my system?

  no chime, black screen, that's all.

  I don't think they are infected.

  The startup chime indicates that the Mac has made the initial diagnostic tests and there is no hardware problems or fundamental software.

  No edge in your case is a problem.  I think it's the luck of the draw to have 2 failures.

  In or out of warranty you can get for free a 'Apple Service Diagnostics' OTC test

  Genius of booking http://www.apple.com/retail/geniusbar/

  Online https://getsupport.apple.com/GetproductgroupList.action

  check the warranty https://selfsolve.apple.com/agreementWarrantyDynamic.do