TPM and Bitlocker

Similar Questions

• Microsoft Surface, TPM and Bitlocker problems

  I currently started to deploy Microsoft Surface Pro and I'm having problems with the TPM, Bitlocker and AD.

  I followed this guide and my backup of Windows 7 machines very well.
  http://TechNet.Microsoft.com/en-us/library/dd875529 (v = ws.10) .aspx

  Process:

  Create the image Windows 8 Enterprise on Surface Pro #1

  Sysprep image

  Capture image using DISM

  Deploy the Image for Surface Pro #2

  Once the Surface Pro #2 out of Sysprep the TPM secure status is "the TPM module is ready for use with reduced functionality.

  If I clear the TPM, the Surface will reboot and push me with an American Megatrends BIOS/UEFI "TPM Page" page.

  Text on the Page:

  "A configuration change has been asked to turn them on, activate, delete, activate and enable the TPM module

  This action erases and turn on TPM (Trusted Platform Module) computer

  WARNING: This application will remove key stored in the TPM

  Press F12 to activate, activate, delete, activate, and enable the TPM module

  Press ESC to reject this change request and continue

  Can I then clear the TPM, and it restores a State "the TPM module is ready for use.".

  So when I go to turn on Bitlocker I get the message "require group policy settings that specify a recovery password before encrypting the drive.  Surface Pro #1 got out of Sysprep and backup is keys properly and nothing to enable Bitlocker necessary.  I was hoping that after clearing the TPM, Surface Pro #2 would be able to do the same thing, but it seems at some point, #2 is not key on AD backup.

  Checking the attributes in Surface Pro #2 Ad Watch "msTPM-TpmInformationForComputer" is filled.  'msTPM-OwnerInformation' is not knowledgeable.

  Hi Phelptwan,

  As you try to create Windows 8 Enterprise on Surface Pro images, I suggest you to report this issue in Windows 8 IT Pro TechNet Forums: http://social.technet.microsoft.com/Forums/windows/en-US/home

  Thank you.

• T420 and Winodws 7 Bitlocker with TPM and PIN

  Hello

  I had a few T420 ThinkPad and you want to use Windows 7 bitlocker, TPM and PIN code.

  The problem is, after the reboot to test the PIN code, I always get the message that the PIN is incorrect, and I have to restore with recovery key. After that Windows tells me I should use a PIN with numbers.

  But my goal is to use a ROD with numbers, special characters...

  For example, a PIN with only numbers work.

  Netscape,

  It works for me with American keyboard.  So I was wondering if there is a problem with the German keyboard.

  http://TechNet.Microsoft.com/en-us/library/ee449438 (WS.10) .aspx

  «We recommend that users set their EN-US keyboard when the PIN entry reinforced to avoid entry failures PIN in the pre-start-up environment.» If you are unable to enter a PIN improved since your keyboard even after affecting the US keyboard layout, you must use a digital-only PIN. »

• FileVault and Bitlocker, Windows 10, OSX10.11

  I'm curious as to the viability of using FileVault on my OS X and Bitlocker partition on my bootcamp partition. I tried before with apparent success on Windows 8.1 and tried again today with Windows 10, using the EFI System.

  First of all, I enabled FileVault before using 10 Windows in Bootcamp. Then once Windows 10 has been installed, I have enabled Bitlocker. Two boot partitions and to report being encrypted, but I've seen web old descriptions indicating that the MBR needs to be changed to make this installation work, or that Windows must be installed on the punched.

  Here is the read disk structure (128 GB MacBook Air SSDS) diskutil. Any thoughts are appreciated.

  #: NAME SIZE TYPE IDENTIFIER

  0: GUID_partition_scheme * GB 121,3 disk0

  1: disk0s1 EFI EFI 209.7 MB

  2: Apple_CoreStorage Macintosh HD 88.3 GB disk0s2

  3: disk0s3 Apple_Boot Recovery 650.0 MB HD

  4: Microsoft database 31.8 GB disk0s4

  5: Windows Recovery 366,0 Mo disk0s5

  MBR is valid on facilities that use the legacy BIOS Setup. What year/model is your Mac?

• Protégé M200: Question about Vista TPM and the Bitlocker

  You want to know if I have a TPM chip to launch bitblocker on the M200 using Vista. Just call Toshiba Technical Support - the guy was totally distraught!

  If I don't have a TPM chip, then I can install it?

  Hello

  It is a good question. To my knowledge the Portege M200 does not support TPM but the Portege M400, R400 module and the R200

  But the Bitlocker, which is only available on the Vista Enterprise and ultimate can also be used without the TPM chip but then some functions are not available; for example, the SecureBoot.
  Without TPM only the OS volume encryption is available.
  In this case you can encrypts the entire Windows volume including both data and file system user, the file of hibernation, the page file and the temporary files.

  Using volume of BONE (HDD) encryption an encryption key will be generated. This key will be written to the USB and then the USB is required!

  AFAIK the Bitlocker requires 2 partitions. A partition must be created as needs at least 50 MB primary partition. I recommend a? about 1.5 GB
  The second big partition Vista can be installed.

  After the installation of Vista the Bitlocker must be enabled in Group Policy (units without secure TPM). This can be done using the command 'gpedit '.
  And then under models of administration-> windows components-> Bitlocker bitlocker function can be activated!

  Anyway, there is much information Bitlocker and I think you should also consult the Microsoft Web site for more information:
  BitLocker Windows Drive Encryption step-by-step guide

  I hope I could help a little

• cards mothers and bitlocker

  My company is buying dell wkstns. However, we will be incorporating bitlocker, I would like to know if all the motherboards of dell are Trusted Platform Module (TPM) 1.2 compatible.  BitLocker can be installed on the computers that the motherboards are not compatible tpm 1.2, but the security level is lower.

  TPM security feature is available on select systems it is not installed on all models, this is an option
  and not available in all countries.
  
  Dell data protection | Access versions 2.0.x 2.1.x, 2.2.X installed on:
   
  Latitude E4310, E5410 E5420, E5420m, E5430, E5510, E5520, E5520m, E5530, E6220, E6320, E6330, and E4320 (ATG), ATG (XFR) E6430 E6420 E6410, E6510, E6520 XT3 (XFR)
  Precision M2400 Mobile M4400, M4500, M4600, M6400, M6500, M6600
  Precision R5500 Office T1500, and T1600, T3500, T3600, T5500, T5600, T7500, T7600
  OptiPlex 380, 580, 760, 765, 790, 960, 980, 990, XE

  Name of the system	Model number
  Latitude	D410, D420, D610, D620, D810, D820
  OptiPlex	GX280 (desktop and Tower only), GX620, 740, 745, 745c, 755
  Dell Precision	M20, M65, M70, M90

   

  	Note:
  	TPM is not a product generally supported due to the regulations of some countries. China has restricted the use of the TPM secure and uses the regulated alternative to the Chinese Government, TCM. TCM technology is not compatible with the TPM such as Windows Vista® BitLocker and Wave Embassy Trusted Suite compatible applications. Hong Kong uses regular TPM. There's no Russian equivalent of TCM. Produced encryption (not only TPM) implementation of encryption with a certain level of force or more, are subject to review and approval by the Russian authorities.

  Normal 0 false false false false fr X-NONE X-NONE MicrosoftInternetExplorer4

• Tablet-Stream 7-5709: battery problems and bitlocker guest

  The product number is K4F53UA.

  The problem of the battery does not charge properly and now I'm wondering the bitlocker code whenever I have to turn off the tablet.

  When the Tablet is turned on, Windows is running and it is plugged, the tablet will not load. It never shows the compressed load and after a while, the battery will stop and the Tablet turns off. While it is turned off, plug the Tablet into causes the charge icon will blink. If the battery still has some power left in charge icon lights up for about 10 seconds, turn off for 2 seconds lights up for 10 seconds, turn off for 2 seconds and continue to do this for a while unitl it just stops. If the battery has been emptied before that happens the same thing off the power except for the icon to load time of stay is a fraction of a second.

  I went into the menu diagnostics and completed of the rapid and Extensive tests. Has been correctly executed without error, but not the case in the diagnostics menu it shows battery when it is plugged.

  I tried to put this before, but it does not show on the forum.

  When the Tablet is turned off and you first plug the charger, you should see the pictogram of loading on the screen for 10 seconds and then disappear for the rest of the time the charger is connected.  If you see something different, the Tablet may be damaged if you have checked that the charger and cable are good.

  Others here have noted the pictogram charge flashing and it turned out to be a faulty Tablet unfortunately.

• BitLocker and bitlocker key takeaways

  is it possible to have the key to all the drives and flash drives? I have 14 disks and 5 flashdrives and I want that bitlocker on all of them, but I don't want to deal with a lot of keys. is it possible to have only one key for all?

  Hello

  Each of the readers would have their own method of work with BitLocker.  In my view, individual keys would be needed, and one key is not acceptable.

  Related thread: see reply SanMartin

  https://social.technet.Microsoft.com/forums/Windows/en-us/23f18ac8-47a8-4bf1-B485-882908a5758d/dual-boot-with-BitLocker-on-both

• Running the server failed and BitLocker on Win 7 Ultimate

  I'm having the following problem:
  When I try to launch windows explorer once the connection, I always get the error:
  "Server execution failed".
  So I can't open my D drive since the Explorer (corresponding to all my data and that is encrypted with BitLocker in Windows 7 Ultimate 32-bit).

  I recently found a work around. I start FreeFileSync (no error) which is a program that compares and allows the synchronization of two directories. I can with the right button on the D drive and unlock the drive by providing the BitLocker password. No matter what program with an order opening the file would work too.
  After I unlock the D drive, Windows Explorer gives me no more problems until I restart.

  It is a permanent way of this problem. I'd appreciate any help.

  A little history:
  ----------------
  The problems started after I changed the location of the directories under my user name (desktop, Documents, pictures, etc.) the disk hard D. aware that this could be the cause, I back return office locations, links, Contacts, & research (using a default restore). The rest is media (for example, photos etc) so I left it to D.

  This has not solved the problem.

  I checked thekeys in the registry, they are correct:
  HKEY_CURRENT_USER\Software\Microsoft\Windows\CurrentVersion\Explorer\User Shell Folders\Personal
  HKEY_CURRENT_USER folders

  Thanks for your help Elsa,

  Unfortunately, the fix didn't settle. I got a: "update is not applicable to your computer".
  However, when I read the 244677 support document, I noticed checking option: option of folder windows in a separate launch process has been involved in the issue. Then, when I checked it offshore (I usually check it out on when I install Windows) everything returned to normal.
  That does for me, it is not essential for me to have it on even though I usually do, but it might be something to look at...
  Thanks again.
  Jack

• ThinkPad Tablet 2 and Bitlocker

  Do you have precise details on how to configure Bitlocker of Windows (Win8 Pro) on ThinkPad Tablet 2 (3679-27U)?

  You can turn on bitlocker from the control panel of Windows 8 (or using bde.exe manage), like on any other computer Windows 8.

• W500 TPM or Bitlocker question

  Hello - I have a new W500 laptop.

  Win7 64 bit

  8 GB RAM

  300 GB HDD

  Processor 3.06 Ghz Dual Core

  When I restart or turn off the laptop is seems not stopped correctly. It does not restart. The only way I can get it lit again is to hold the button for 10 seconds and it completely off it where I have lights up again. I tried to take out the battery and put it back in but it doesn't seem to solve the problem. I don't know, but this problem may have started after I activated Bit Locker.

  Please advise...

  Thank you

  Note of the moderator; subject to change under the leadership of their relevance

  Problem solved...

  Apply the Microsoft hotfix below and the problem solved :-).

  http://support.Microsoft.com/hotfix/KBHotfix.aspx?kbnum=975496

  GM

• Lenovo X 1 Yoga (20FQ) clean Windows 10 Pro Install UEFI

  Hello

  I decided to do a clean install of Windows 10 Professional (x 64) on my Lenovo X 1 Yoga (20FQ).

  I'm currently pulling my hair out trying to install Windows 10 in UEFI mode, I want to do so that I can use all the features of the TPM and bitlocker. No matter what I do I was not able to install Windows 10 Professional (x 64) in UEFI mode, I was able to install it in legacy mode. I tried several BIOS configurations in terms of disable/enable Legacy UEFI OS at startup, but when I put the BIOS only UEFI mode the key USB Windows 10 Professional (x 64) (that I created using the file .iso image downloaded with Microsoft download tool), the machine refuses to boot from the USB or PCIe-NVMe UEFI in mode only.

  Can someone point me to a guide to install Windows to UEFI mode?

  I'm sure to UEFI, the file system must be FAT32 not NTFS.

  It may seem strange for NTFS works with 'legacy', but not UEFI - but I think that FAT32 is now considered a 'standard' and integrated with UEFI while NTFS is still proprietary format of Ms...

• How to reply or start a new thread?

  Am connected, but can not find any "New message" button to be able to ask questions. What is needed other than the Member and need help? I posted more before there are two 2 years and the last in June. Seems there were a few changes I don't know and cannot circumvent this missing part for display.

  Robert is off, then I'll take it...

  You can not respond to the 'Search' page You will need to click on one of the threads highlighted blue,

  "RE: Dell Optiplex 960 TPM and Bitlocker issues."

  Will take you to the specific thread. From there, you can click the button answer.

  To start a new thread, go to the Board of Directors had need, such as general office equipment. On the right in the empty search bar, click new message.

• Dell place 8 Pro 3G - Sleep / Wake Up questions

  Hello

  A few days ago I bought the Dell coming Pro 8 3 G tablet. I have all available Windows Updates, latest drivers and BIOS of 'My Dell'. Unfortunately, my Tablet has some problems with the mode 'sleep'.

  1. only the 'Stop' and 'Restart' options are available in the drop-down list on 'Power' in the charming bar. 'Sleep' is not available and I can not turn off the screen by pressing the power button / stop on the right side of the tablet. I did a few tests using the powercfg command-line tool and I found, the driver mobile (or hardware) prevents the past in standby mode: if I disable the driver, I can put my device in mode 'sleep' without any problem.

  Mobile broadband driver:

  Dell 5570e Wireless HSPA + (42mbps network) Mobile Broadband Card #4
  Date: July 9, 2014
  Version: 14.7.1050.64

  2. to wake up to the top of the device to sleep mode does not work if you do this after the first 10 seconds in mode 'sleep'.

  When I disable WiFi driver in Device Manager, clock works well, even a few hours after the mode 'sleep' was launched.

  WiFi pilot:

  Dell 1538 wireless 802.11 a/g/n adapter.
  Date: July 4, 2014
  Version: 3.7.2.59655

  I don't know if these questions are based on the hardware or driver/software based.

  Everyone knows about similar problems?

  Kind regards

  Dominik

  Hello, I had the same problem and I tried all drivers update possible solution (reformatting my Tablet 6 times), the update of windows files, etc... Nothing helps. In the end, I found a similar problem for a Dell location 11 Pro user who suggests to turn off the TPM and Bitlocker. As soon as I disabled it Win8 table bitlocker and TPM/Bitlocker from the Bios (Secure boot - disabled), the Tablet began to wake from sleep with no problems... it's been 1 week now and it has not failed once (it allows to get a black 3 - 4 times per day before the change of the screen).

• Problems with Bitlocker and X 250

  Hello

  I try to use Windows 10 and Bitlocker with X 250 laptop, but whenever I start the laptop Bitlocker wants me back the recovery key. TPM is enabled. What could be wrong?

  Activation of Secure Boot Bios and reinstalled the operating system. BitLocker has started working after that.