Failed to load the chipset driver. NLite or Floppy work.

Similar Questions

• The \Driver\WUDFRd failed to load the device driver USB\VID_0483 & PID_2016\5 & 295bd535 & 0 & 2.

  WUDFRd failed to load of the device

  Hello

  I did a clean install of Windows 7 64 bit and everything goes fine until I started to add the specific drivers of lenovo t61p.  I get the following in the Event Viewer error message:

  The \Driver\WUDFRd failed to load the device driver USB\VID_0483 & PID_2016\5 & 295bd535 & 0 & 2.

  After a lot of Googling, I found that the usb device is a fingerprint reader.  remove the fingerprint reader drivers removes the error in Event Viewer.

  AuthenTec TouchChip fingerprint coprocessor uses the v1.5.0.289 driver.  their website States that the error is a problem with Microsoft.  See this link:

  http://support.AuthenTec.com/Knowledgebase/KBview/tabid/843/ArticleID/443/WUDFRd-failed-to-load-for-the-Device.aspx, or search their Knowledge Base for "WUDFRd failed to load for the device.

  I see that the other members of the forum answers have similar problems, but they still have to find a solution.  is that someone in Microsoft could provide an update for a fix?

  Yes! After two years, I found a solution.  I installed a previous version of Lenovo sw fp and it fixes attention on win 7 sp1 2 t60.  I've been running for about 3 weeks and warning went on two PCs. then, download and install IN1FGP08WW1.exe.  It is fp s-o of Lenovo in UTEK and there the pilot to clear the warning.  BUT it's not as safe as the current Lenovo sw fp.  Apparently, she was abandoned when authentic bought UTEK because of this.  as I understand it, if someone has physical access to your pc they can decifer pw of windows in the registry.  This isn't a big problem for me.

• Failed to load the JDBC driver when you run the update of the base

  I use dev studio to extract data in the pipeline to an Oracle database using an adapter record, on version 3.1.1 short. I get errors when running the update of the base:
  
  ERROR 22/03/13 17:13:37.273 UTC (1363972417273) {config} forge: (AdapterRunner): unable to load the JDBC driver: oracle.jdbc.OracleDriver. com.endeca.edf.adapter.plugins.JdbcAdapterException: cannot load JDBC driver: oracle.jdbc.OracleDriver.      at com.endeca.edf.adapter.plugins.JdbcAdapter.loadDriver(JdbcAdapter.java:256) at com.endeca.edf.adapter.plugins.JdbcAdapter.execute(JdbcAdapter.java:91) at com.endeca.edf.adapter.AdapterRunner.run(AdapterRunner.java:168) at com.endeca.edf.adapter.AdapterRunner.main(AdapterRunner.java:43) caused by: java.lang.ClassNotFoundException: oracle.jdbc.OracleDriver to java.net.URLClassLoader$ 1.run(URLClassLoader.java:200) at java.security.AccessController.doPrivileged (Native Method) at java.net.URLClassLoader.findClass(URLClassLoader.java:188) at java.lang.ClassLoader.loadClass(ClassLoader.java:303) at Sun.misc.Launcher$appclassloader$ AppClassLoader.loadClass (Launcher.java:301) at java.lang.ClassLoader.loadClass(ClassLoader.java:248) at java.lang.ClassLoader.loadClassInternal(ClassLoader.java:316) at java.lang.Class.forName0 (Native Method) at java.lang.Class.forName(Class.java:169) to com.endeca.edf.adapter.plugins.JdbcAdapter.loadDriver(JdbcAdapter.java:252)... 3 more
  ERROR 22/03/13 17:13:38.291 UTC (1363972418291) FORGE {config}: the java process evaluating the manipulative java class 'com.endeca.edf.adapter.plugins.JdbcAdapter' failed. Check the file ' / u01/oracle/VIS/apps/apps_st/comn/Oracle/endeca/Discover/./logs/forges/Forge/Edf.Pipeline.RecordPipeline.JavaManipulator.LoadOracleItems.log ' for more information.
  ERROR 22/03/13 17:13:44.840 UTC (1363972424840) {baseline} FORGE: Forge failed with 2 errors and 0 warnings.
  
  Pass on the adapter check crossings are defined as follows:
  
  DB_DRIVER_CLASS = oracle.jdbc.OracleDriver
  DB_URL = JDBC: thin: username / [email protected]:1521:VIS
  SQL = select * from XXFCI_ENDECA_ITEM_DATA
  
  I've set up the classpath as a variable that is defined in environment.properties as follows:
  forge.javaClasspath = ${ENDECA_PROJECT_DIR}/config/lib/java/ojdbc6.jar;${ENDECA_PROJECT_DIR}/config/lib/java/AdvJDBCColumnHandler.jar;${ENDECA_PROJECT_DIR}/config/lib/java/javaManipCommon-1.1.jar;${ENDECA_PROJECT_DIR}/config/lib/java/jakarta-oro-2.0.8.jar;D:/Endeca/CAS/3.1.1/lib/recordstore-forge-adapter/recordstore-forge-adapter-3.1.1.jar
  
  I'm passing forge.javaClasspath as an argument through the DataIngest.xml variable. The arguments that I am passing in DataIngest.xml are as follows:
  < args >
  < arg > - vw < / arg >
  < arg - > pruneAutoGen < / arg >
  < arg - > javaClasspath < / arg >
  < arg >$ {forge.javaClasspath} < / arg >
  < / args >
  
  
  I wonder if the versions of javaManipCommon - 1.1.jar and jakarta-oro - 2.0.8.jar are correct for version 3.1.1 of short. How will I know? What else can I do to fix this?
  
  Any help you can give would be appreciated!
  
  Thank you
  Becky Bradberry
  Senior Oracle consultant
  Promote the Concepts

  You run this under Linux or Windows? The path of the log file looks like Linux, but your classpath is configured to use windows (semicolons instead of colon) separators.

  Concerning

  Michael

• Failed to load the JDBC driver class

  Hello

  I managed to install Flash Builder 4 (FlashBuilder_4_LS10.exe) with the plugin (Adobe_Application_Modeling_plugin_v102_eclipse35.zip) data model. On my local pc (XP Professional), I'm under tomcat with LS (lcds31 - win.exe). I can run all the samples, but when I try to add an oracle DB data service I receive
  ' Not found data source: java: / comp/env/jdbc/ORCL.
  "Could not load the"oracle.jdbc.driver.OracleDriver JDBC driver class.

  I copied ojdbc6.jar (I tried ojdbc5.jar as well, but without success) in the C:\lcds\tomcat\webapps\lcds-samples\WEB-INF\lib directory. I also uncommented RDS servlet in C:\lcds\tomcat\webapps\lcds-samples\WEB-INF\web.xml and changed useAppserverSecurity to false. Finally, I added the following to C:\lcds\tomcat\conf\Catalina\localhost\lcds-samples.xml:

  < resource name = "jdbc/PUF" type = "javax.sql.DataSource"
  driverClassName = "oracle.jdbc.driver.OracleDriver"
  maxIdle = "2" maxWait = "5000".
  URL="JDBC:Oracle:thin:@oradbsrv:1521:ORCL" username = "atest" password = "aaa123" maxActive "4" =
  / >

  Any idea what I might be missing or hurt?

  Thank you
  Julius

  I have an Oracle data source running in LCDS31 of screens LCD liquid samples.  I have my Oracle driver in tomcat/lib not WEB-INF/lib.  I connect to an Oracle 10.2 server.  I am also under the odbc14.jar

  I would like to start by moving your tomcat/lib driver.  First try ojdbc5.jar.  I think I went to ojdbc14 because latest drivers did not work.

• Failed to load the LAN driver wireless after update BIOS NB550D

  Hello
  I have a new NB550D and jst installed the recommended BIOS update. Now the LAN wireless driver not found (error code 31).
  I tried to install the driver of lestest leave Toshiba Web site, but it cannot always be loaded by Windows...

  Everything was fine before this! Any ideas?

  The value of the default BIOS and try again.

  Wireless network card is recognized correctly in the Device Manager?

• Failed to load the local profile. IO error. All files in My Documents have disappeared. How to restore

  did a normal turn on the computer.  Message came back failed to load the local profile.  IO error.  When he signed me, all my documents in My Documents had disappeared.

  A corrupt profile is fairly easy to recover with minimal losses.  Refer to the following procedure:

  "How to recover damaged Windows XP user profile"
    <>http://support.Microsoft.com/kb/555473 >

  Corrupt profiles are almost always accompanied by hard drive corruption.  After recovery, scan your hard disk for errors using chkdsk with the /f or/r option

  "How to perform disk error in Windows XP check"
    <>http://support.Microsoft.com/kb/315265 >

  The disk check procedure can take hours depending on the size of your hard drive and the amount of corruption and cannot be interrupted, then run it when you won't need your computer for awhile.

  HTH,
  JW

• Cannot load the class driver: com.mysql.jdbc.Driver

  Hello
  
  I am new to Oracle solutions and I am trying to deploy a simple ADF Application that retrieves data from a mysql database, I already set up the mysql connector in libraries, but when I try to deploy the application, the following message appears for me:
  
  
  Using the 7101 port *.
  C:\Users\FBELLUCO\AppData\Roaming\JDeveloper\system11.1.1.5.37.60.13\DefaultDomain\bin\startWebLogic.cmd
  [waiting for the server to complete its initialization...]
  .
  .
  Arguments of memory in JAVA: - Xms256m-Xmx512m - XX: CompileThreshold = 8000 - XX: PermSize = 128 m - XX: MaxPermSize = 512 m
  .
  Start mode of WLS = development
  .
  CLASSPATH=C:\Oracle\MIDDLE~1\ORACLE~1\modules\oracle.jdbc_11.1.1\ojdbc6dms.jar; C:\Oracle\MIDDLE~1\patch_wls1035\profiles\default\sys_manifest_classpath\weblogic_patch.jar; C:\Oracle\MIDDLE~1\patch_jdev1111\profiles\default\sys_manifest_classpath\weblogic_patch.jar; C:\Oracle\MIDDLE~1\JDK160~1\lib\tools.jar; C:\Oracle\MIDDLE~1\WLSERV~1.3\server\lib\weblogic_sp.jar; C:\Oracle\MIDDLE~1\WLSERV~1.3\server\lib\weblogic.jar; C:\Oracle\MIDDLE~1\modules\features\weblogic. Server.modules_10.3.5.0.jar; C:\Oracle\MIDDLE~1\WLSERV~1.3\server\lib\webservices.jar; C:\Oracle\MIDDLE~1\modules\ORGAPA~1.1/lib/Ant-all.jar; C:\Oracle\MIDDLE~1\modules\NETSFA~1.0_1/lib/Ant-contrib.jar; C:\Oracle\MIDDLE~1\ORACLE~1\modules\oracle.jrf_11.1.1\jrf.jar; C:\Oracle\MIDDLE~1\WLSERV~1.3\common\derby\lib\derbyclient.jar; C:\Oracle\MIDDLE~1\WLSERV~1.3\server\lib\xqrl.jar
  .
  Path = C:\Oracle\MIDDLE~1\patch_wls1035\profiles\default\native; C:\Oracle\MIDDLE~1\patch_jdev1111\profiles\default\native; C:\Oracle\MIDDLE~1\WLSERV~1.3\server\native\win\32; C:\Oracle\MIDDLE~1\WLSERV~1.3\server\bin; C:\Oracle\MIDDLE~1\modules\ORGAPA~1.1\Bin; C:\Oracle\MIDDLE~1\JDK160~1\jre\bin; C:\Oracle\MIDDLE~1\JDK160~1\Bin; C:\Program Files (x86)\SenchaSDKTools-2.0.0-beta3; C:\Windows\System32; C:\Windows; C:\Windows\System32\Wbem; C:\Windows\system32\WindowsPowerShell\v1.0\; C:\Program Files\Intel\WiFi\bin\; C:\Program Files\Fichiers Files\Intel\WirelessCommon\. C:\Program Files (x 86) \Microsoft ASP.NET\ASP.NET Web Pages\v1.0\; C:\Program Files\Microsoft SQL Server\110\Tools\Binn\; C:\Program Files (x86)\GtkSharp\2.12\bin; C:\Program Files\Intel\WiFi\bin\; C:\Program Files\Fichiers Files\Intel\WirelessCommon\. C:\Oracle\MIDDLE~1\WLSERV~1.3\server\native\win\32\oci920_8
  .
  ***************************************************
  * To start WebLogic Server, use a username and *.
  * password assigned to an administrator-level user. For *.
  * server administration, using the WebLogic Server *.
  * the http://hostname:port\console console *.
  ***************************************************
  from weblogic with the Java version:
  Java version "1.6.0_24".
  Java (TM) SE Runtime Environment (build 1.6.0_24 - b50)
  Java Client VM (build 19.1 - b02, mixed mode)
  WLS starting with line:
  C:\Oracle\MIDDLE~1\JDK160~1\bin\java-client-Xms256m-Xmx512m - XX : CompileThreshold = 8000 - XX : PermSize = 128m - XX : MaxPermSize = 512m-Dweblogic.Name=DefaultServer-Djava.security.policy=C:\Oracle\MIDDLE~1\WLSERV~1.3\server\lib\weblogic.policy-Djavax.net.ssl.trustStore=C:\Oracle\Middleware\wlserver_10.3\server\lib\DemoTrust.jks-Dweblogic.nodemanager.ServiceEnabled=true - Xverify : aucun-da-Dplatform.home=C:\Oracle\MIDDLE~1\WLSERV~1.3-Dwls.home=C:\Oracle\MIDDLE~1\WLSERV~1.3\server-Dweblogic.home=C:\Oracle\MIDDLE~1\WLSERV~1.3\server-Djps.app.credential.overwrite.allowed=true-Dcommon.components.home=C:\Oracle\MIDDLE~1\ORACLE~1 - Djrf.version=11.1.1 - Dorg.apache.commons.logging.Log=org.apache.commons.logging.impl.Jdk14Logger-Ddomain.home=C:\Users\FBELLUCO\AppData\Roaming\JDEVEL~1\SYSTEM~1.13\DEFAUL~ 1-Djrockit.optfile=C:\Oracle\MIDDLE~1\ORACLE~1\modules\oracle.jrf_11.1.1\jrocket_optfile.txt-Doracle.server.config.dir=C:\Users\FBELLUCO\AppData\Roaming\JDEVEL~1\SYSTEM~1.13\DEFAUL~1\config\FMWCON~1\servers\DefaultServer-Doracle.domain.config.dir=C:\Users\FBELLUCO\AppData\Roaming\JDEVEL~1\SYSTEM~1.13\DEFAUL~1\config\FMWCON~1-Digf.arisidbeans.carmlloc=C:\Users\FBELLUCO\AppData\Roaming\JDEVEL~1\SYSTEM~1.13\DEFAUL~1\config\FMWCON~1\carml-Digf.arisidstack.home=C:\Users\FBELLUCO\AppData\Roaming\ JDEVEL~1\SYSTEM~1.13\DEFAUL~1\config\FMWCON~1\arisidprovider-Doracle.security.jps.config=C:\Users\FBELLUCO\AppData\Roaming\JDEVEL~ 1\SYSTEM~1.13\DEFAUL~1\config\fmwconfig\jps-config.xml-Doracle.deployed.app.dir=C:\Users\FBELLUCO\AppData\Roaming\JDEVEL~1\SYSTEM~1.13\DEFAUL~1\servers\DefaultServer\tmp\_WL_user-Doracle.deployed.app.ext=\--Dweblogic.alternateTypesDirectory=C:\Oracle\MIDDLE~1\ORACLE~1\modules\oracle.ossoiap_11.1.1,C:\Oracle\MIDDLE~1\ORACLE~1\modules\oracle.oamprovider_11.1.1-Djava.protocol.handler.pkgs=oracle.mds.net.protocol-Dweblogic.jdbc.remoteEnabled=false-Dwsm.repository.path=C:\Users\FBELLUCO\AppData\Roaming\JDEVEL~1\SYSTEM~1.13\DEFAUL~1\oracle\store\ GMDS-Dweblogic.management.discover=true-Dwlw.iterativeDev=-Dwlw.testConsole=-Dwlw.logErrorsToConsole=-Dweblogic.ext.dirs=C:\Oracle\MIDDLE~1\patch_wls1035\profiles\default\sysext_manifest_classpath ; C:\Oracle\MIDDLE~1\patch_jdev1111\profiles\default\sysext_manifest_classpath weblogic. Server
  < 19/08/2012 BRT 16h40min52s > < Info > < security > < BEA-090905 > < disabling CryptoJ JCE provider auto-intégrité for better startup performance. To allow this control, enter - Dweblogic.security.allowCryptoJDefaultJCEVerification = true >
  < 19/08/2012 BRT 16h40min52s > < Info > < security > < BEA-090906 > < change the default Random Number Generator in RSA CryptoJ of ECDRBG to FIPS186PRNG. To disable this change, specify - Dweblogic.security.allowCryptoJDefaultPRNG = true >
  < 19/08/2012 BRT 16h40min53s > < Info > < WebLogicServer > < BEA-000377 > < ہ WebLogic Server Java hotspot Client VM Version 19.1 - b02 Sun Microsystems Inc. >
  < 19/08/2012 BRT 16h40min53s > < Info > < management > < BEA-141107 > < Version: WebLogic Server 10.3.5.0 Fri Apr 1 20:20:06 PDT 1398638 2011 >
  < 19/08/2012 16h40min54s BRT > < opinion > < WebLogicServer > < BEA-000365 > < server status changed initially >
  < 19/08/2012 BRT 16h40min54s > < Info > < WorkManager > < BEA-002900 > < self-adjusting Initializing of thread pool >
  < 19/08/2012 16h40min54s BRT > < opinion > < LoggingService > < BEA-320400 > < C:\Users\FBELLUCO\AppData\Roaming\JDeveloper\system11.1.1.5.37.60.13\DefaultDomain\servers\DefaultServer\logs\DefaultServer.log log file will be rotated. Reopen the log file if stopped tailings. This can happen on some platforms such as Windows. >
  < 19/08/2012 16h40min54s BRT > < opinion > < LoggingService > < BEA-320401 > < log file was shot in C:\Users\FBELLUCO\AppData\Roaming\JDeveloper\system11.1.1.5.37.60.13\DefaultDomain\servers\DefaultServer\logs\DefaultServer.log00005. Log messages will continue to be logged in C:\Users\FBELLUCO\AppData\Roaming\JDeveloper\system11.1.1.5.37.60.13\DefaultDomain\servers\DefaultServer\logs\DefaultServer.log. >
  < 19/08/2012 16h40min54s BRT > < opinion > < Log Management > < BEA-170019 > < C:\Users\FBELLUCO\AppData\Roaming\JDeveloper\system11.1.1.5.37.60.13\DefaultDomain\servers\DefaultServer\logs\DefaultServer.log server log file is opened. All events in the log server-side will be written to this file. >
  < 19/08/2012 16h40min57s BRT > < opinion > < security > < BEA-090082 > < security initialization using security realm myrealm. >
  < 19/08/2012 16h41min00s BRT > < opinion > < WebLogicServer > < BEA-000365 > < server changed to STANDBY status >
  < 19/08/2012 16h41min01s BRT > < opinion > < WebLogicServer > < BEA-000365 > < server status changed initially >
  < MessageLocalizationHelper > < getLocalizedMessage > O recurso pacote 'oracle.jrf.i18n.MBeanMessageBundle_pt_BR' com a chave 'oracle.jrf.JRFServiceMBean.checkIfJRFAppliedOnMutipleTargets' nao faith sown.
  < 19/08/2012 16h41min06s BRT > < opinion > < LoggingService > < BEA-320400 > < C:\Users\FBELLUCO\AppData\Roaming\JDeveloper\system11.1.1.5.37.60.13\DefaultDomain\servers\DefaultServer\logs\DefaultDomain.log log file will be rotated. Reopen the log file if stopped tailings. This can happen on some platforms such as Windows. >
  < 19/08/2012 16h41min06s BRT > < opinion > < LoggingService > < BEA-320401 > < log file was shot in C:\Users\FBELLUCO\AppData\Roaming\JDeveloper\system11.1.1.5.37.60.13\DefaultDomain\servers\DefaultServer\logs\DefaultDomain.log00005. Log messages will continue to be logged in C:\Users\FBELLUCO\AppData\Roaming\JDeveloper\system11.1.1.5.37.60.13\DefaultDomain\servers\DefaultServer\logs\DefaultDomain.log. >
  < 19/08/2012 16h41min06s BRT > < opinion > < Log Management > < BEA-170027 > < server has established the connection with the Service of diagnosis level domain successfully. >
  < 19/08/2012 16h41min06s BRT > < opinion > < WebLogicServer > < BEA-000365 > < server status changed to ADMIN >
  < 19/08/2012 16h41min06s BRT > < opinion > < WebLogicServer > < BEA-000365 > < Server State has changed for RESUMING >
  < 19/08/2012 16h41min07s BRT > < opinion > < Server > < BEA-002613 > < Channel "Default [11]" now listen on 0:0:0:0:0:0:0:1:7101 for iiop, t3, ldap, snmp, http protocols. >
  < 19/08/2012 16h41min07s BRT > < WARNING > < Server > < BEA-002611 > < Hostname "FBELLUCO PC", corresponds to multiple IP addresses: 192.168.2.165, fe80:0:0:0:5d2e:304 b: c1ee:fef9 12, fe80:0:0:0:140f:246e:4e4b:5580% 18%, 2001:0:4137:9e76:140f:246e:4e4b:5580 >
  < 19/08/2012 16h41min07s BRT > < opinion > < Server > < BEA-002613 > < Channel "Default [10]" now listen on 127.0.0.1:7101 for iiop, t3, ldap, snmp, http protocols. >
  < 19/08/2012 16h41min07s BRT > < opinion > < Server > < BEA-002613 > < Channel "Default [4]" now listen on fe80:0:0:0:140f:246e:4e4b:5580:7101 for iiop, t3, ldap, snmp, http protocols. >
  < 19/08/2012 16h41min07s BRT > < opinion > < Server > < BEA-002613 > < Channel "Default [3]" now listen on fe80:0:0:0:0:5efe:c0a8:2 a 5:7101 for iiop, t3, ldap, snmp, http protocols. >
  < 19/08/2012 16h41min07s BRT > < opinion > < Server > < BEA-002613 > < Channel "[1] by default ' is now listening on 192.168.0.135:7101 for iiop, t3, ldap, snmp, http protocols. >
  < 19/08/2012 16h41min07s BRT > < opinion > < Server > < BEA-002613 > < Channel "Default" is now listening on 2001:0:4137:9e76:140f:246e:4e4b:5580:7101 for iiop, t3, ldap, snmp, http protocols. >
  < 19/08/2012 16h41min07s BRT > < opinion > < Server > < BEA-002613 > < Channel "Default [6]" is now listening on fe80:0:0:0:5cee:582d:c1d2:274 d: 7101 for iiop, t3, ldap, snmp, http protocols. >
  < 19/08/2012 16h41min07s BRT > < opinion > < Server > < BEA-002613 > < Channel "Default [9]" is now listening on fe80:0:0:0:5 ca 1:539 a: e6ac:87 d: 7101 for iiop, t3, ldap, snmp, http protocols. >
  < 19/08/2012 16h41min07s BRT > < opinion > < Server > < BEA-002613 > < Channel "Default [7]" is now listening on fe80:0:0:0:9808:46 d 3: f632:c499:7101 for iiop, t3, ldap, snmp, http protocols. >
  < 19/08/2012 16h41min07s BRT > < opinion > < Server > < BEA-002613 > < Channel "Default [8]" now listen on fe80:0:0:0:5d2e:304 b: c1ee:fef9:7101 for iiop, t3, ldap, snmp, http protocols. >
  < 19/08/2012 16h41min07s BRT > < opinion > < Server > < BEA-002613 > < channel 'by default [5]' now listen on fe80:0:0:0:5d5a:6be2:c66e:a30e:7101 for iiop, t3, ldap, snmp, http protocols. >
  < 19/08/2012 16h41min07s BRT > < opinion > < Server > < BEA-002613 > < Channel "Default [2]" is now listening on 192.168.2.165:7101 for iiop, t3, ldap, snmp, http protocols. >
  < 19/08/2012 16h41min07s BRT > < opinion > < WebLogicServer > < BEA-000331 > < started WebLogic Admin Server "DefaultServer" domain "DefaultDomain" running in development Mode >
  < 19/08/2012 16h41min07s BRT > < opinion > < WebLogicServer > < BEA-000365 > < Server State has changed in the RACE >
  < 19/08/2012 16h41min07s BRT > < opinion > < WebLogicServer > < BEA-000360 > < server started operation >
  IntegratedWebLogicServer start time: 16364 ms.
  IntegratedWebLogicServer has begun.
  [Run application on Server Instance IntegratedWebLogicServer ASSANE...]
  [16: 41:08]-deployment began. ----
  [16: 41:08] the target platform's (Weblogic 10.3).
  [16: 41:09] recovery of the existing application information
  [16: 41:09] analysis of the dependence running...
  [16: 41:09] deployment 2 profiles...
  [16: 41:10] wrote on the Web for C:\Users\FBELLUCO\AppData\Roaming\JDeveloper\system11.1.1.5.37.60.13\o.j2ee\drs\IBTI\ViewControllerWebApp.war application Module
  [16: 41:10] wrote the Module Enterprise Application to C:\Users\FBELLUCO\AppData\Roaming\JDeveloper\system11.1.1.5.37.60.13\o.j2ee\drs\IBTI
  [16: 41:10] Application deployment...
  < 19/08/2012 16h41min11s BRT > < WARNING > < J2EE > < BEA-160195 > < application version of the lifecycle event listener oracle.security.jps.wls.listeners.JpsAppVersionLifecycleListener is ignored, because the ASSANE application is not versioned. >
  < 19/08/2012 16h41min11s BRT > < error > < hats > < BEA-149265 > < error has occurred in the execution of the request for deployment with the ID ' 1345405270810 'for task ' 0'. Error: ' weblogic.application.ModuleException: '
  weblogic.application.ModuleException:
  at weblogic.jdbc.module.JDBCModule.prepare(JDBCModule.java:302)
  at weblogic.application.internal.flow.ModuleListenerInvoker.prepare(ModuleListenerInvoker.java:199)
  to weblogic.application.internal.flow.DeploymentCallbackFlow$ 1.next(DeploymentCallbackFlow.java:517)
  at weblogic.application.utils.StateMachineDriver.nextState(StateMachineDriver.java:52)
  at weblogic.application.internal.flow.DeploymentCallbackFlow.prepare(DeploymentCallbackFlow.java:159)
  Truncated. check the log file full stacktrace
  Caused by: weblogic.common.resourcepool.ResourceSystemException: cannot load the class driver: com.mysql.jdbc.Driver
  at weblogic.jdbc.common.internal.JDBCUtil.parseException(JDBCUtil.java:301)
  at weblogic.jdbc.common.internal.ConnectionEnvFactory.loadDriver(ConnectionEnvFactory.java:75)
  to weblogic.jdbc.common.internal.ConnectionEnvFactory. < init > (ConnectionEnvFactory.java:131)
  at weblogic.jdbc.common.internal.ConnectionPool.initPooledResourceFactory(ConnectionPool.java:712)
  at weblogic.common.resourcepool.ResourcePoolImpl.start(ResourcePoolImpl.java:235)
  Truncated. check the log file full stacktrace
  >
  < 19/08/2012 16h41min11s BRT > < WARNING > < hats > < BEA-149004 > < failures have been detected all introducing deploy application task "ASSANE. >
  < 19/08/2012 16h41min11s BRT > < WARNING > < hats > < BEA-149078 > < message 149004 track battery
  weblogic.application.ModuleException:
  at weblogic.jdbc.module.JDBCModule.prepare(JDBCModule.java:302)
  at weblogic.application.internal.flow.ModuleListenerInvoker.prepare(ModuleListenerInvoker.java:199)
  to weblogic.application.internal.flow.DeploymentCallbackFlow$ 1.next(DeploymentCallbackFlow.java:517)
  at weblogic.application.utils.StateMachineDriver.nextState(StateMachineDriver.java:52)
  at weblogic.application.internal.flow.DeploymentCallbackFlow.prepare(DeploymentCallbackFlow.java:159)
  Truncated. check the log file full stacktrace
  Caused by: weblogic.common.resourcepool.ResourceSystemException: cannot load the class driver: com.mysql.jdbc.Driver
  at weblogic.jdbc.common.internal.JDBCUtil.parseException(JDBCUtil.java:301)
  at weblogic.jdbc.common.internal.ConnectionEnvFactory.loadDriver(ConnectionEnvFactory.java:75)
  to weblogic.jdbc.common.internal.ConnectionEnvFactory. < init > (ConnectionEnvFactory.java:131)
  at weblogic.jdbc.common.internal.ConnectionPool.initPooledResourceFactory(ConnectionPool.java:712)
  at weblogic.common.resourcepool.ResourcePoolImpl.start(ResourcePoolImpl.java:235)
  Truncated. check the log file full stacktrace
  >
  [16: 41:11] # incomplete deployment. ####
  [16: 41:11] remote deployment failed (oracle.jdevimpl.deploy.common.Jsr88RemoteDeployer)
  # Cannot run application ASSANE due to the deployment on IntegratedWebLogicServer error.
  [Application ASSANE stopped and cancelled Server Instance IntegratedWebLogicServer]
  
  Thank you!

  Add
  mysql_jconnector.jar in the C:\bea\jdeveloper\\system11.1.1.5.37.60.13\DefaultDomain\lib folder

• Satellite A30-151 PSA33E - cannot install the chipset driver

  Hello

  I have Toshiba Satellite A30-151 PSA33E-72KX3-EN.
  I recently Reinstalled Windows XP.

  The chipset driver that I downloaded from the web site, does not work.
  file: http://support1.toshiba-tro.de/tedd-files2/0/csutil-20080320162841.zip

  The message is: Intel... requires a platform chipset soustenans running on a supported operating system.

  What should do?

  Hello

  The message appears because;
  (1) the chipset driver is not compatible with the chipset
  (2) or the chipset driver is not compatible with the operating system

  It seems that this point 1) is correct.
  As much as I know Satellite A30-151 PSA33E-72KX3-EN supports the ATI graphics chip. Right?
  My knowledge this old model of laptop Satellite A30 escaped with graphics chip ATI or Intel graphics chip.
  Maybe the chipset driver is only compatible with laptops with an Intel GPU.

  However, you can install a diagnostic tool for material like Everest Home Edition.
  This will show you the chipset of s for laptop and you can download the Intel chipset driver from the Intel page.

  PS: Make sure that Win XP is up to date!

• Half-life 2 says failed to load the Launcher DLL specified module could not be found

  Failed to load the Launcher DLL:

  the specified module could not be found

  Hi Madoo17,

  Welcome to the community of Microsoft and thanks for posting the question. I've surely you will help find a solution on the issue.

  1. Once you get this error message?

  2. it worked before?

  3 did you changes to the computer before the show?

  Perform the steps:

  Method 1:

  Put the computer in a State of boot is a way to know which application is causing this problem.

  To help resolve the error and other messages, you can start Windows by using a minimal set of drivers and startup programs. This type of boot is known as a "clean boot". A clean boot helps eliminate software conflicts.

  Step 1:

  Put your boot system helps determine if third-party applications or startup items are causing the problem. If so, you need to maybe contact the manufacturer of the program for updates or uninstall and reinstall the program.

  Follow the steps in the link below to do the same thing:

  How to configure Windows XP to start in a "clean boot" State

  Note: After troubleshooting, be sure to set the computer to start as usual as shown here:

  Step 2: To configure Windows to use a Normal startup state

  After you have used the boot is a way to solve your problem, you can follow these steps to configure Windows XP to start normally.

  a. Click Start and then click Run.

  b. type msconfig and click OK. The System Configuration Utility dialog box appears.

  c. click on the general tab, click Normal Startup - load all services and device drivers and then click OK.

  d. When you are prompted, click on restart to restart the computer.

  Method 2: Use the (SFC) System File Checker tool.

  SFC system gives an administrator the ability to scan the files all protected to check their versions. If the System File Checker detects that a protected file has been replaced, it retrieves the correct version of the file in the folder cache (% Systemroot%\System32\Dllcache) or the Windows installation source files and then replaces the incorrect file. System File Checker verifies and repopulates the cache folder also. You must be logged in as an administrator or as a member of the Administrators group to run the System File Checker.

  Check out this link to do the same thing:

  Description of Windows XP and Windows Server 2003 System File Checker (Sfc.exe)

  Hope this information helps. Please reply back with the State so that we can help you.

• I have a Toshiba Satellite A105-S361 and I get this message: Windows successfully loaded the device driver for this hardware, but does not the hardware device. (Code 41)

  I have a Toshiba Satellite A105-S361 and I get this message: Windows successfully loaded the device driver for this hardware, but does not the hardware device. (Code 41)

  Hello

  I suggest to refer to this link, scroll down to error code 41 and follow the steps and check if that helps:

  http://support.Microsoft.com/kb/310123

  It will be useful.

• start the computer to start but stops at "failed to load the core file?

  Original title: how to get Windows XP to boot my computer from starting when starts but stops at "failed to load the core file?

  When I try to start my computer, it stops at "cannot load the kernel."  It will go no further. What is the solution?

  Please see: How to perform a Windows XP repair install

• the user profile Service service has no logon failed to load the user profile

  I received the following message when I try and log in my account to have:

  The user profile Service service has no logon failed to load the user profile

  What are my options?

  Hello

  1st thing to try is the system in safe mode restore to before the problem

  http://www.windowsvistauserguide.com/system_restore.htm

  Windows Vista

  Using the F8 method:

  1. Restart your computer.
  2. When the computer starts, you will see your computer hardware are listed. When you see this information begins to tap theF8 key repeatedly until you are presented with theBoot Options Advanced Windows Vista.
  3. Select the Safe Mode option with the arrow keys.
  4. Then press enter on your keyboard to start mode without failure of Vista.
  5. To start Windows, you'll be a typical logon screen. Connect to your computer and Vista goes into safe mode.
  6. Do whatever tasks you need and when you are done, reboot to return to normal mode.

  If that does not solve it read more

  read the tutorial below

  http://www.Vistax64.com/tutorials/130095-user-profile-service-failed-logon-user-profile-cannot-loaded.html

  When you log on a Windows Vista-based or a Windows 7 computer by using a temporary profile, you receive the following error message:

  The user profile Service has not logon. User profile cannot be loaded.

  http://support.Microsoft.com/kb/947215#letmefixit

  Your user profile was not loaded correctly! You have been logged on with a temporary profile.

  http://support.Microsoft.com/kb/947242

  If you tried to log on to Windows and received an error message telling you that your user profile is damaged, you can try to fix it. You will need to create a new profile and then copy the files from the existing to the new profile. You must have at least three user accounts on the computer to perform these operations, including the new account that you created.

  http://Windows.Microsoft.com/en-us/Windows-Vista/fix-a-corrupted-user-profile

• Windows cannot load the device driver for this hardware (HL-DT-ST DVDRAM GH40F SCSI CdRom Device) because the driver may be corrupted or missing. (Code 39)

  Original title: the answer useful?

  Help, please! Windows cannot load the device driver for this hardware (HL-DT-ST DVDRAM GH40F SCSI CdRom Device) because the driver may be corrupted or missing. (Code 39)

  Hello

  Code 39 means that the driver is corrupted or missing.

  Please make all below even if you have done some before as it is often the set of operations which solves
  the question.

  Try this - Panel - Device Manager - CD/DVD - double-click on the device - driver tab - click
  Update the drivers (this will probably do nothing) - then RIGHT click the drive - UNINSTALL - REBOOT
  This will refresh the default driver stack. Even if the reader does not appear to continue below.
  
  Then, work your way through these - don't forget the drive might be bad, could be a loose cable or
  slight corrosion on the contacts (usually for a laptop) and other issues.

  Your CD or DVD drive is missing or is not recognized by Windows or other programs
  http://support.microsoft.com/kb/314060 - a Mr Fixit

  Try this fix manually if the Fixit 314060 does not work
  http://www.pchell.com/hardware/cd_drive_error_code_39.shtml

  Your CD or DVD drive is missing or is not recognized by Windows or other programs-
  a Mr Fixit
  http://support.Microsoft.com/kb/982116

  The CD drive or the DVD drive does not work as expected on a computer that you upgraded to Windows Vista
  http://support.Microsoft.com/kb/929461

  When you insert a CD or a DVD, Windows Vista may not recognize the disc
  http://support.Microsoft.com/kb/939052

  Your CD or DVD drive cannot read or write media - A Mr Fixit
  http://support.Microsoft.com/GP/cd_dvd_drive_problems

  CD/DVD drive does not appear in Windows Vista, or you receive this error during the installation of Windows Vista after booting from the DVD (AHCI)
  http://support.Microsoft.com/kb/952951
  Drive CD - R or CD - RW Drive is not recognized as a recordable device
  http://support.Microsoft.com/kb/316529/

  Hardware devices not detected or not working - A Mr Fixit
  http://support.Microsoft.com/GP/hardware_device_problems

  Another possibility is that the cables are loose. Remove ALL power, then make sure that the cables in both
  ends. Remove and replace, do not just tight. For laptops, you can often clean power and
  contacts data with a pencil eraser.

  --------------------------------------------------------------

  Also check with your system manufacturer to see if there are any updated drivers for your DVD. Or even if it
  are you can reinstall the 'old'. Many use Windows default drivers however some special aura
  ones. Also check the website of the manufacturer of the car.

  Look at the sites of the manufacturer for drivers - and the manufacturer of the device manually.
  http://pcsupport.about.com/od/driverssupport/HT/driverdlmfgr.htm

  I hope this helps.

  Rob Brown - Microsoft MVP<- profile="" -="" windows="" expert="" -="" consumer="" :="" bicycle=""><- mark="" twain="" said="" it="">

• "When I tried to sign on the computer, I get the following message: the user profile service service failed connection, failed to load the user profile.

  "Whenever I tried to sign up with my password to connect, do the following: the user profile service service failed connection, failed to load the user profile" when I click OK, it disconnects... Help, please

  Go to Safe Mode and do a system restore. See the link below:

  The user profile Service has not logon. User profile cannot be loaded
  http://answers.Microsoft.com/en-us/Windows/Forum/windows_vista-security/the-user-profile-service-failed-the-logon-user/995955f8-d9d4-4148-840D-c896c3be78b8

  Follow the links on the post.

• Failed to load the user profile on my laptop. Help

  I can't connect my laptop as his watch the above message, it is 2 years and a half old and isa an inspiron 1525, helps, I know I need to re boot, but as I am not too good with the system and was looking to find out where to download a disc and make sure that I get the right one can someone help me. in my library now wiyh a ubs if I need.

  Next time please post the error message in its entirety... verbatim.

  What is the real error message?...

  Failed to load the user profile and the user profile service does not log

  If Yes, read on...

  You haveanother admin account , you can connect?
  If so, please do and do a system restore, if no help, run the Microsoft Support tutorial below.

  If you don't have another admin account, go into safe mode.
  Here's how to get safe mode:
  Shut down your computer > turn it back on and immediately and repeatedly tab key F8 until you see a black and white screen. The top/down arrow and select Safe Mode with network.

  In the window of logon in safe mode...
  1 can connect to your account administrator in safe mode?
  If so, do a restore system first, if no help, run theMicrosoft tutorial support listed below.

  2. If you can't log into your own account, you see another admin next to your account in the logon screen?
  If you do, that one is the built-in Administrator account. By default, there is no password. Connect to it and newdo a first system restore, if not help, run the Microsoft tutorial support listed below.

  If you are able to log on in safe mode, do a system restore. Choose a date when you were able to log in NORMAL MODE as your restore point.
  How to restore the system:
  http://www.Vistax64.com/tutorials/76905-System-Restore-how.html

  Tutorial from Microsoft support :
  http://support.Microsoft.com/kb/947215
  There are several methods, go through one by one.
  Method 3 has a "fix it for me" application

  For the benefits of others looking for answers, please mark as answer suggestion if it solves your problem.