TPMAuth.exe error - Windows XP

Similar Questions

• Tsp1.dll TPMauth.exe not found error

  At the start of my computer (Windows XP SP3) I get an error message TPMauth.exe tsp1.dll not found. I saw an answer for that rack on Windows 7. What is the procedure for XP?

  If this does not work from above you can try to save the dll file by clicking on start > then in the run box type

  RegServ c:\windows\system32\tsp.dll

  Do not know if this will work, but worth a try.

  MyPcHealth - free tools

• After Windows 7 update DRVLOAD. EXE Error

  Hello

  I have a problem. After an automatic update from Microsoft's site my Windows 7 Home Premium is no longer in effect. At startup the following appaers: x: error-windows-system32-drvload.exe and does not start. I can't bring him to an old date system and the system does not restart, and the only solution is resettlement.

  Did this and it works that well he'll be back in 81 updates and the problem recurs. For the second time, and then reinstall the updates a blue screen with the irq problem. Back to the old date of updates again just works now. Nearby, he installed the updates and restart the laptop works again nothing and the appers fault even once.

  Now, I installed again and update SP1 manually. It starts normally upwards and after making 41 updates, that the same thing happened.

  I'll be a little desperate and don't know what to do. I really hope that someone can help me here.

  Rayman76

  Hi rayman76,

  Just two very simple questions before you start a lengthy discussion:

  1. which model of laptop you have exactly?
  2 have you installed your laptop with normal Microsoft or Toshiba Recovery disk drive?

• AccelerometerSt.exe error on the computer Windows 10 brand new

  I have the same problem that many others have with the Application AccelerometerSt.exe error.   BUT, I have a brand new - 1 week old computer and it came with 10 windows already on it.  I have the HP Envy x 360.   How do you intend that to solve the problem.   If you uninstall and reinstall Windows 10, I'll need much more detailed information.   I don't know how to do this - which was the reason why I only watched computers with her already preinstalled.

  Hello

  Try the following.

  Open windows control panel, open programs and features, make a right click the entry for HP 3D DriveGuard and select uninstall.

  When this has completed, restart the laptop.

  When windows has reloaded, download and install the version of DriveGuard on the following link.

  http://ftp.HP.com/pub/SoftPaq/sp67001-67500/sp67280.exe

  Kind regards

  DP - K

• VPIM Setup error - windows.exe

  I download vipm - windows.exe from here: https://lumen.ni.com/nicif/us/evaltlktdigbus/content.xhtml

  When I double-click vipm - windows.exe under Windows XP Pro, I get the following error, see jpg below:

  is there a work around?  I want to see the I2C of IPNet example

  

  found this

  https://decibel.NI.com/content/docs/doc-1151

• In Windows Server 2003, I got the following error "svchost.exe - error on line 392."

  In Windows Server 2003, I got the following error "svchost.exe - error on line 392."

  Kindly help.

  Hi Sophie,.

  Your Windows Server 2003 issue is more complex than what is generally answered in the Microsoft Answers forums. It is better suited for the IT Pro TechNet public. Please post your question in the Windows Server forum. You can follow the link to your question:

  http://social.technet.Microsoft.com/forums/en-us/category/WindowsServer

• Lsass.exe in Windows safe mode system error.

  Lsass.exe in Windows safe mode system error.  I tried to repair and recovery of Windows and he persists?  Any ideas on how to solve this problem?

  Most of lsass.exe errors, if this is the result of malware, is the result of a corrupted registry, specifically in the security hive.

  Follow the steps described here.

  You can also try running chkdsk & an System File Checker analysis if the registry repair does not resolve the issue.

  See you soon

• Ehshell.exe error with Windows XP Media Center Edition Version 2002, service pack 3

  Running Windows XP Media Center Edition Version 2002 with service pack 3.  I get the ehshell.exe error when I try to watch live TV.  It crashes, debug and I usually won't have to ctrl-alt-del to get anywhere.  Do not seem to have this problem before I added various updates etc, tv was fine before this date.

  I'm not particularly computer so nice easy steps please...!

  Thank you, Nicholas

  Ehshell.exe is a Windows system file that is used to run Microsoft Media Center. It is not a critical system file. However, the ehshell.exe file can become infected and cause errors trying to run certain programs. If the ehshell.exe is absent, it can also cause errors. Reinstall a clean copy of ehshell.exe with the Microsoft System Restore.

  1. • 1

       Click on the "Start" menu, then click on "programs". Scroll down and click on "Accessories," then "system tools." Click "system restore."

     • 2

       Click 'Next' in the window system restore for a list of points of restoration which has been archived.

     • 3

       Select a restore point created before the ehshell.exe file becomes corrupt or got deleted. If no restore point until this time is listed, click on "Show restore points more" to select the one that is before this date. Click 'Next' to choose which restore point.

     • 4

       Click 'Finish' to start the system restore. The computer will restart once the process is complete and the ehshell.exe file is reinstalled.

• Whenever I click on ANY icon on my desktop dll32.exe error C: / Windows/System32/run

  Original title: error - dll32.exe C:/Windows/System32/run

  Whenever I click on ANY icon on my desktop, it happens and I can't open any file.

  Hi karima,.

  (1) since when are you facing this problem?

  (2) remember to make changes?

  (3) what is the complete error message you receive?

  Method 1: Run the SFC (System File checker) Scan. To do this, follow the steps below

  With the installation of Windows XP in the drive disc

  un) Click Start, click principally made programs, Accessories, and click command prompt

  (b) type the following command and press ENTER:

  sfc/scannow

  The sfc/scannow command analyzes all protected system files and replaces incorrect versions with appropriate Microsoft versions.

  Method 2: let me know if the problem persists in safe mode. To do this, follow the steps mentioned in the article below

  A description of the options to start in Windows XP Mode

  http://support.Microsoft.com/kb/315222

  If the problem persists, this could be an activity of the virus

  Method 3: Run Microsoft Security scanner (MSS) to any threat and try to correct

  http://www.Microsoft.com/security/scanner/en-us/default.aspx

  Note: Infected files can be deleted from your computer; There is a chance of data loss.

• Error message "" unable to save the MP Servic > exe "to windows NT or Services"

  Error message "" unable to save the MP Servic > exe "to windows NT or Services"

  I get this message trying to install a Canon printer

  Jim

  A few quick questions for you:

  • What printer model
  • Have you tried uninstalling and reinstalling the printer
  • You, the drivers are up-to-date

  You can try and run the difficulty he tool and see if that solves your problem

• Error - app fails to load (forcefield.exe) error 0xc000034 to start Windows XP.

  Original title: 0cx000034.

  Windows xp pro. all KB (130 or almost). I've stalled zonealarm 9-3-037-000 and is unable to contact the update server. I have this problem at the start of this application fails to load (forcefield.exe) error 0xc000034, press (x) to continue. Za tech has the slightest idea why. Technical support told me to do evervthing, I does not. They never say why I get error at startup. W the dose the average of the error and how to fix

  Hi Ray,

  It seems that ZoneAlarm has not installed correctly.

  I recommend you to uninstall ZoneAlarm completely using the removal tool and check if the problem persists.

  Subsequently, you can re - install software ZoneAlarm .

  Hope the helps of information. Please post back and we do know.

  Concerning
  Joel S
  Microsoft Answers Support Engineer
  Visit our Microsoft answers feedback Forum and let us know what you think.

• NTVDM.exe. trouble message I said: "16-bit MS-DOS subsystem" then C:\Windows\sustem32\ntvdm.exe error while setting up environment for the application

  I can not also with ntvdm.exe. I'm no computer expert. The message said: "16-bit MS-DOS subsystem" (this on the header of the window). Then the message is C:\Windows\sustem32\ntvdm.exe error when defining the application environment.

  I already did a sfc/scannow and Windows Resource Protection did not find any breach of integrity.

  I'm trying to run an application on this website http://www.ray-ban.com/international/science/virtual-mirror.

  I'd appreciate any help.

  Best regards

  original title:ntvdm.exe. disorder

  Hello
  You are able to use your applications without problem?

  To check what is causing the problem, try the following steps:

  1:NTVDM method is bound to display drivers for nVidia.I suggest you to update display drivers on the manufacturer's Web site

  http://Windows.Microsoft.com/en-us/Windows7/update-a-driver-for-hardware-that-isn ' t-work correctly

  Method 2: Clean boot

  Put the computer in a clean boot (namely if any third-party software hinders the process)
  How to troubleshoot a problem by performing a clean boot in Windows Vista or in Windows 7
  http://support.Microsoft.com/kb/929135

  Check with step 1 (run a clean boot):-If everything works well after a clean boot, you can deduce that some third-party services are at the origin of the problem.
  Continue with the remaining steps to pin-point on the third party service.

  Note: After you find the program causing the problem, you will have to perhaps to update or install a newer version of the program and also don't forget to put the computer to a normal startup.

  3:Disable method and then check the firewall/security software on the system tray.
  Note: Activate the security software after the test

• Try to change the mouse settings in Control Panel, receive the error "windows rundll.exe host has stopped working".

  When I go into the control panel to change my settings for the mouse, I get the error "windows rundll.exe host has stopped working", therefore, you cannot change the mouse settings, how do I fix it?  My mouse is out of control! :)

  * original title - why windows will not host rundll.exe I would change my settings of the mouse? *

  Hello

  If you use 3rd party mouse drivers updated or reinstall those who, like Logitech, Microsoft
  Wireless and so on.

  =================================================================

  To solve the problems:

  If your: Windows host process Rundll32 has stopped working
  http://www.WinVistaClub.com/T40.html

  What is rundll32.exe and why it works?
  http://www.howtogeek.com/HOWTO/Windows-Vista/what-is-rundll32exe-and-why-is-it-running/

  What is the suspicious Rundll32.exe process?
  http://WindowsXP.MVPs.org/Rundll32.htm

  -----------------------------------------------------

  Try these to erase corruption and missing/damaged file system repair or replacement.

  Run DiskCleanup - start - all programs - Accessories - System Tools - Disk Cleanup

  Start - type in the search box - find command top - RIGHT CLICK – RUN AS ADMIN

  sfc/scannow

  How to analyze the log file entries that the Microsoft Windows Resource Checker (SFC.exe)
  program generates in Windows Vista cbs.log
  http://support.Microsoft.com/kb/928228

  Then, run checkdisk - schedule it to run at next boot, then apply OK your way out, then restart.

  How to run the check disk at startup in Vista
  http://www.Vistax64.com/tutorials/67612-check-disk-Chkdsk.html

  -----------------------------------------------------

  If no joy trying to determine what is the cause:

  How to troubleshoot a problem by performing a clean boot in Windows Vista
  http://support.Microsoft.com/kb/929135
  How to troubleshoot performance issues in Windows Vista
  http://support.Microsoft.com/kb/950685

  Optimize the performance of Microsoft Windows Vista
  http://support.Microsoft.com/kb/959062
  To see everything that is in charge of startup - wait a few minutes without doing anything - then right
  Click on taskbar - task manager - take a look at stored by - Services - process -.
  It's a quick reference (if you have a small box left - show for all users, then
  Check that).

  How to check and change Vista startup programs
  http://www.Vistax64.com/tutorials/79612-startup-programs-enable-disable.html

  A quick check to see who are loading is method 2 - using MSCONFIG then after a
  a list of these here.
  --------------------------------------------------------------------

  Tools that should help you:

  Objects of process Explorer - free - find out what files, registry keys and other processes
  have open, which DLLs they have loaded and more. This exceptionally effective utility will be
  even show you who owns each process.
  http://TechNet.Microsoft.com/en-us/Sysinternals/bb896653.aspx

  Autoruns - free - see what programs are configured so that it starts automatically when your
  system boots and you log in. Autoruns is also the full list of registry and files
  locations where applications can configure start automatic settings.
  http://TechNet.Microsoft.com/en-us/sysinternals/bb963902.aspx
  Process Monitor - Free - monitor the system files, registry, process, thread and DLL activity
  in real time.
  http://TechNet.Microsoft.com/en-us/Sysinternals/bb896645.aspx

  There are many excellent free tools from Sysinternals
  http://TechNet.Microsoft.com/en-us/Sysinternals/default.aspx

  -Free - WhatsInStartUP this utility displays the list of all applications that are loaded
  automatically when Windows starts. For each request, the following information
  appears: product Type of startup (registry/Startup folder), Command - Line String,
  Name, file Version, company name, location in the registry or the file system and more.
  It allows you to easily disable or remove unwanted programs that run in your Windows
  startup.
  http://www.NirSoft.NET/utils/what_run_in_startup.html

  There are many excellent free tools to NirSoft
  http://www.NirSoft.NET/utils/index.html

  Window Watcher - free - do you know what is running on your computer? Maybe not.
  The window Watcher says it all, every window created by all programs that are running, the statement
  If the window is visible or not.
  http://www.KarenWare.com/PowerTools/ptwinwatch.asp

  Many excellent free tools and an excellent newsletter at Karenware
  http://www.KarenWare.com/

  Hope these helps.

• Windows Vista starts with white screen - dwm.exe and dllhost.exe errors on the hard drive.

  original title: freezing after login! ... disk hard dwm.exe and dllhost.exe errors. As usual load screen and then nothing can be used/open to all. Occasionally start opens and closes and nothing else beyond.

  Cannot use the laptop mode safe mode with networking. Have you tried to repair registry free of bugs and using Vista install with view to repair OS repair disk, but there are a lot of people having this problem different from this problem with dwm.exe dwm.exe or versions/varieties. This is is produced immediately after the download and installation of Microsoft Updates I might add.  Please can someone help?  Thank you very much... LiZ :)

  Never use Registry Repair programs.

  They can cause more harm than good.

  ~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~

   

  http://www.bleepingcomputer.com/tutorials/tutorial140.html

  Understand the Extras in Windows Vista and Windows Update info is at the link above.

   

  Remove the Vista updates; two ways to do this:

  1. a System Restore to before the updates:

  Click Start > programs > Accessories > system tools > System Restore > restore time/choose your own date > next

  If you use Norton, disable it before using the system restore.

  If it is impossible to enter the Normal Mode, do a Safe Mode system restore:

  Press F8 at the startup/power and the list of startup options, use THE ARROW key to select Safe mode > and then press ENTER.

  System restore steps according to the info above.

  Also:

  2. click on start > right click on computer > properties > Windows updates down the lower left corner > updates installed in the lower left corner in the next window

  > then click the one that you don't want > uninstall will appear at the top > uninstall it.

  ~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~

  In addition, on the page where you clicked "Installed updates", click on change settings at the top left corner it

  > Change update settings in the next page of AutoUpdate to "check for updates but let me choose etc" > OK ".

  When you take a look at pending updates, you can either download/install them one at the time, namely the update causing you problems.

  > or if you do not need an individual > right-click on > UAC prompt > hide it

  See you soon.

  Mick Murphy - Microsoft partner

• Opens the error window 'Winword.EXE - bad image' C:\Windows\system32\bitsprx532.dll «»

  Error window opens "Winword.EXE - bad image", "C:\Windows\system32\bitsprx532.dll is not designed to run on Windows or it contains an error. Try fashion program at new etc. etc."

  This happens at startup when programs open ie. audio and whenever I try to open a program, in this case MS Word. I click the OK button several times and he goes and allows me to work in the program.

  Word:

  http://answers.Microsoft.com/en-us/Office/default.aspx

  Office at the above link forums

  http://answers.Microsoft.com/en-us/Office/ee861096.aspx

  Word Help Forums at the link above.

  They will help you with your question Word when repost you in the Office Forums above.

  See you soon.

  Mick Murphy - Microsoft partner