Trackpad of MacBook Pro gets stuck and the screen freezes with pink and yellow lines

Similar Questions

• MacBook pro gets stuck after 6 minutes

  I got my MacBook Pro for about 4 years. Everything was fine until a few months ago. There is some ongoing work on utilities in front of my house and the workers accidentally done something to mess up my internet connection - cut a wire or something? In any case, I told them and fixed it. Then, my MacBook Pro started having problems.

  It gets hung up or stuck after about 6 minutes of work. It does not seem serious if I work online or offline.

  The strange thing is it only happens at my house and it only happens with my MacBook Pro. My iPad and iPhone, both work very well for me. My MacBook Pro works great everywhere else. Other MacBook works very well for me. It of like my MacBook Pro is trying to do something specific, or to run a program only when it is at home and is then stuck.

  I took it to the Apple store and a third computer repair place to party, but it still works very well in these places and they do not find what is wrong.

  I don't know what to try next.

  Help, please!

  Note the time of the next frost. After the reboot, open the Console app in Finder > Applications > utilities and look for entries of the log at the time of freezing. Suspicious message here.

• MacBook Pro does not start, the screen is pixelated.

  MacBook Pro (2011) running iOS later.

  Screen went blue, at which time mac was turned off.  Try to be able to save and mac does not start.

  Tried to boot using utilities, but can not access this screen.  (the screen is also all the "pixelated".)

  Looking for ideas before making a trip to the Apple store.

  1 disconnect all devices (Ethernet, USB, external hard drives, mouse)

  2. start in safe mode

  3. go Finder - press Option-Go - ~/Library/ /DiagnosticReports ofnewspapers

  4. find the missing table inception report and post it please

  If your Mac will not turn on - Apple Support

• MacBook pro 2015 stuck in Bluetooth Setup mode after commissioning, recognizes on the keyboard and track pad. SMC reset does not work.

  My Macbook Pro 2015 stopped periodically (and now permanently discontinued) responding on keyboard and touch pad Board. This seemed to start at the same time, I got a Bluetooth headset; When I turn on the computer, he's stuck in Bluetooth Setup mode. I tried to reset the SMC, and it does not work. I don't have a Bluetooth keyboard to even try with it. Also, I can't start in safe mode. It seems completely blocked. Any help you might be able to offer would be great!

  Hello rad trp,.

  Thank you for using communities Support from Apple!

  From your post, I understand that your keyboard and trackpad on your MacBook Pro are unresponsive and now you see the Bluetooth set up screen on the computer. I also see that you tried to reset the SMC, but that doesn't seem to work because the built-in keyboard do not respond.

  I know that you do not have a bluetooth keyboard, you can connect, but you have a USB keyboard? Even a USB keyboard for a computer Windows will work. If you do, I would say connection that the keyboard and you use these keys to perform an SMC reset, but reset the PRAM as well. Instructions on both of these resets can be found in the links below if you need.

  Reset the management system (SCM) controller on your Mac - Apple Support

  OS X Yosemite: reset PRAM your computer

  See you soon!

• I have a Macbook pro (2011 model). It gets stuck on the start screen on to half way through commissioning. This happens whenever the mac turns on. The problem is solved when I reinstall Yosemite to boot to Recovery Mode disk utility.

  I have a Macbook pro (2011 model). It gets stuck on the start screen on to half way through commissioning. This happens whenever the mac turns on. The problem is solved when I reinstall Yosemite to boot to Recovery Mode disk utility. However, the next time you start, the startup process is blocked to halfway to new (on the screen with the toolbar and the status of apple). I want a more permanent solution to reinstall the operating system every time. Would appreciate someone's suggestions and thanks in advance.

  Replace your hard drive.

  You have a backup of trust? If not, buy a disc of exterrnal for that as well.

  The progress bar from the left end at the beginning of the commissioning indicates that your drive has been so damaged, it could not be mounted. Five minutes of progress bar is shown as it does the equivalent of disk utility (ERD [Directory]). If you have reinstalled several times and the problem is not fixed, your drive is in solid form.

• I'm unable to download apps from creative cloud to my MacBook Pro.  I downloaded the package install twice.  I can double click on the installer and it seems to be downloading, but it just guard spinning for 10-15 minutes, then gives me an error and a pro

  ??? I'm unable to download apps from creative cloud to my MacBook Pro.  I downloaded the package install twice.  I can double click on the installer and it seems to be loading but it just guard spinning for 10-15 minutes, then gives me an error and a blue button to get help.  We have other MacBook Pro in the studio and just downloaded quickly.  Any ideas?

  Hello

  Run Adobe Cleaner tool - https://helpx.adobe.com/creative-cloud/kb/cc-cleaner-tool-installation-problems.html

  Download creative cloud of Download Adobe Creative Cloud apps | Adobe Creative Cloud free trial

  If this does not help then follow the steps mentioned below.

  1. Access \User\\Library\Application Support\Adobe *

  And/Library/Application Support / Adobe *.

  To access the hidden user library folder, see library user access hidden files. Mac OS 10.7 and later.

  1. Find and delete the files AAMUpdater and OOBE
  2. / Library/Application Support/Adobe (rename Adobe Application Manager and Adobe of joint office)
  3. Go > utilities > (rename Adobe Application Manager and creative cloud)
  4. Download Creative cloud-apps Download Adobe Creative Cloud | Adobe Creative Cloud free trial

  Let us know if this will help.

• Problem with Cloud - on MacBook pro, when I opened the window CC, all I get is welcome Aps active community.  a blue dial spining but nothing else

  Problem with Cloud - on MacBook pro, when I opened the window CC, all I get is welcome Aps active community.  a blue dial spining but nothing else

  Hello

  I suggest you fine the link below and it will help you.

  Does not open App | Wheels of progress turn continuously

  Concerning

  Maansee

• My wife has an i5 to 2.3 GHz MacBook Pro early 2011 and it worked like a slug.  Ran disk utility and verified that the disk needs repair using recovery HD.  What does this lead and what is the risk of losing all the data is there?

  My wife has an i5 to 2.3 GHz MacBook Pro early 2011 and it worked like a slug.  Ran disk utility and verified that the disk needs repair using recovery HD.  What does this lead and what is the risk of losing all the data is there?

  Even if it is very slow, you must make a return upwards before the race "repair disk". The risk of data loss is minimal, but do it anyway: Save and run to repair the disk.

  As for what it implies - most of the time nothing more than simply sitting and waiting to do his thing.

• I left my macbook pro on accidentally and now he's dead.  I have hurt the battery?

  I left my macbook pro on accidentally and now he's dead.  I have hurt the battery?

  I'm little, Yes, but probably not killed there that only once.

  This repeatedly will however reduce the battery life.

• I have a Macbook Pro 2015 retina and I wonder how the cycles of battery are calculated?

  I have a Macbook Pro 2015 retina and I wonder how the cycles of battery are calculated?

  If I load to 100% and then run it down on battery to 0% of course it counts as a battery cycle.

  If I recharge to 90% and run up to 5% or 10%, which count as a battery sprays?     Between what % are there?

  The reason I ask is that I try to keep the cumulative battery cycle count down.

  Thank you

  http://www.Apple.com/batteries/why-lithium-ion/

  Whenever he finishes a full charge, it's a cycle.  If you charge 70% one day, then 30% another day, it's a cycle.

  The Apple site, I posted above, it explains very clearly.

  A cycle is counted when the battery has completed a 100% charge, not a discharge.

• Laptop stops randomly and gets stuck on the saving settings

  Basically, we have some laptops 10 + this will stop randomly and get stuck on the "saving settings screens.

  Here are the different models of toshiba R500-R600 M10 M9 M5

  We changed versions of bios etc, reimagee them, even used an image of windows xp disc rather than soe.

  Hardware tests OK and customers do not something in particular, some when others when you connect using applications office, back in after a while. Some use docking stations, others not.

  All ideas

  Hello

  Just a question: are you an authorized service provider?
  I ask this question because it looks like you are an ASP because you have so many laptops and you have tested different things.

  It's really hard to say what the reason is for this but I think that in this case, you should contact Toshiba directly. Maybe it s a known issue and it can be fixed in a few minutes.
  So ask for it and wait for a response.

• Chip and upgrade memory set on my great MacBook Pro 1.2 and want to download the latest OS to Snow Leopard. An Apple store guy did to his own personal machine, but the upgrade was a procedure in several steps. Help!

  I upgraded my MacBook Pro 1.5 with CT541631 CT2KIT12864AC667.000 2 GB UPGRADE for a APPLE MACBOOK PRO 2.16 GHZ INTEL CORE DUO (17-INCH) SYSTEM. I also added more memory. The Apple Store genius who did this on his own machine was on his own because Apple does not officially support the best MacBook Pro they never built and isn't there anymore to ask questions about the OS correct necessary updates. I think he said he had to go to Lion first and then upgrade to latest, although we both agreed that El Capitan was too buggy. Anyone know what I need to do to let the download procedure OS know that my ols is now a new machine?

  Where did you buy the RAM module?  If it was not directly a source of Apple, you did it sure it was for the year and the time of year of output of your model (i.e. mid-2006 MacBook Pro)?  To identify the age, go to this tip:

  http://discussions.Apple.com/docs/doc-6413

  Specs such as CT541631 CT2KIT12864AC667.000 are totally superfluous, unless they also indicate what year and the time of year, the model came out.

• When I send a message it gets stuck in the Outbox and won't unless I click on the message until it is "BOLD" with a print, then delete.

  Forwarded messages or new messages are not automatically leave and get stuck in the Outbox.  If I leave it alone, I get a message that there was an error and the message could not be sent.  However, if I leave the message stuck in the Outbox, the message gets actually released several times until I have go into the Outbox and delete the message.

  Compacting files try one at a time.

  To defragment:

  Start | All programs | Accessories | System Tools | Disk Defragmenter. Just above that you'll also see disk cleanup. I was running first and also in the other Options tab, the third option to get rid of old that take place of restore points.

  Bruce Hagen
  MS - MVP October 1, 2004 ~ September 30, 2010
  Imperial Beach, CA

• Documents get stuck in the printer queue and I have to restart so that they print

  often, when I try to print a document or web page, or anything, the document will get stuck in the queue for the printer.  the printer will tell me 1 post pending but nothing prints.  I have to restart my computer to print the document.

  No answers so I'll try to help. I don't have a printer for many years. A practical tool, I used to use repeatedly put my printer icon on my desktop or in the taskbar. Try it! Go to Control Panel, open Printers and faxes, right click on your printer and choose Create shortcut and click Yes. Once on your desktop then drag it to the taskbar when you have a page open it will be more accessible. Open it and click on the printer and click Cancel all documents. From what I remember when the print queue of the printer is over load it won't print and clicking on cancel all documents throws to the queue. Check the menu options to set your preferences. I hope this helps!

• HP Photosmart Plus B210e print is not on MacBook Pro running Lion and the use of Airport

  HP Photosmart more B210e

  MacBook Pro running Lion and using Apple Airport

  Cannot print

  Cannot find printer

  Printer reinstalled with no luck

  Help, please.  Thank you.

  Hi jpjones2,

  It worked before? If so, I suggest restarting the base station AirPort, Mac and the Photosmart. Then test it again. Ensure that the Photosmart works well autonomous - try printing a copy on the device.

  Is only the failing printing and analysis very well? Or you are not able to install the device on your Mac at all?

  Already check the Photosmart is connected to your network and has received an IP address?