Traffic for Y510p external cooler?

Similar Questions

• Satellite L630 - 16K - mouse is debilitating with connected external cooling fan

  I pounded a L630 - 16 k with overconsumption and usage on bed so fan was broken.
  I'm a fan of base 3 external off Amazon today.
  Its connected via USB.
  I noticed today carpet mouse disabling a lot and freezes for about 2 minutes.

  Is there something I can do?

  Hello

  from my point of view, the external cooling pad might be useful, but I don't think t he would replace the internal cooling system.

  In the case where your fan is broken and doesn't work t, the affected part must be replaced.
  To do this the whole unit must be dismantled, and this could be a delicate procedure.

  From my point of view of the few so you don t have enough experience, you should not try to disassemble the camera.
  The risk of damage of the part is too high.

  You must also be a consistent cooling module.
  These parts can be ordered from authorized service partner Toshiba.

  In my opinion its worth to spend little money to order the part replaced by the engineer.
  Contact the ASP in your country and ask for help.

  Dude good luck

• CAN´t define a proper resolution for UltraWide external screen 21:9 (2560 x 1080 px)

  After the installation of macOS Sierra my external screen shows only 16:9 (1920 x 1080 px with black bars on each side). He used to work before I updated. Now the correct resolution is not even appear in the display settings on my MacBook Pro (end of 2015). I don't want to use or pay for any external software, please fix this.

  It seems to be a common problem: macOS Sierra no longer supports monitors ultrawide?

• AT300 / Support for German external keyboard?

  Hello

  The AT300 doesn't have a driver for keyboards external German (USB). What can I do to get help for a German keyboard layout?

  Hello

  Have you tried a few apps Android like external keyboard support Pro
  This application provides some international keyboards and working relationship with UBS and BT keyboards.

• Looking for an external charger for QOSMIO X 500 - 11 d

  Hello

  I am a new (happy) owner of a QOSMIO X 500-11 D and I am looking for an external charger for the battery (s) of this notebook (REF PA3730U-1BRS). I found a charger (reference: PA3091E-2CHG) but I have a slight doubt about the fact that it can be used for these batteries.

  If anyone has any info on a usable model, I'm interested...
  NB: I understand the technical answers

  Thanks in advance,

  Best regards
  Fred

  Hello Fred

  I'm quite familiar with Toshiba products, but, to be honest, I haven't heard that this mechanism exists, so I think that you won't be able to find it anywhere.
  Best source where you can ask is closest to Toshiba authorized maintainer.

  I really think that this device doesn't exist.

• Should what format I use for my external drive for time machine?  I have a WD 2 TB that is formatted for PC new drive.

  Should what format I use for my external drive for time machine?  I have a WD 2 TB that is formatted for PC new drive.  When I got to disk utilities to erase, and then reformat the options are

  1 mac OS extended (journaled)

  2 mac OS extended (journaled, encrypted)

  3 mac OS Extended (respect for case-sensitive, journaled)

  4 mac OS extended (case-sensitive, journaled, encrypted)

  See the information below If you can not back up or restore your Mac with the help of Time Machine - Apple Support

  When you select a drive to use with Time Machine, your Mac automatically prompts you if you need to reformat the drive.

  • If you are using an external drive connected to your Mac, use disk utility to make sure that your backup disk is formatted in HFS + extended (journaled) and is the partition type GUID Partition Table (GPT).
  • If you use a time Capsule, formatting the drive for Time Machine preferences automatically formats the drive as HFS + Extended (respect for case-sensitive, journaled) with a GUID Partition Table (GPT).

• I need the driver for my external HARD disk drive

  Hi how are you?

  Well, I would like to know I do an external drive using the portable hard drive whose name is "Toshiba MK8034GSX" which is with a capacity of 80 GB.
  A few days back I plugged to the USB port with my pc but after that it says need driver and I n t have the HARD disk driver.

  So kindly if anyone has the driver or know the link where I can find the driver then tell me I will be very grateful to you all.

  With regard to:

  Martine André

  Hello

  What is a USB HDD?
  You n t need any driver, and there is no drivers for an external USB HDD.

  The USB driver is part of the Windows OS and it s already installed.
  The USB HDD must be fitted with a plug & play device which means that should be recognized automatically after you connect to the laptop USB port.

  What OS you have and what laptop is it?
  The operating system is up to date?
  USB ports are correctly listed in the Device Manager?

• How can I transfer video files to the library in windows media player for an external hard drive

  How can I transfer video files to the library in windows media player for an external hard drive. My os is Windows XP Home Edition and I use wmp 11.

  You have to locate the files on your internal hard drive, using the Explorer, then drag and drop them on the hard drive.  If you don't know where they are on your hard drive, right click on the video file in the library and choose the location of the opened file.

• How to take the permissions of the user account for my external backup hard drive, incase of my computer crashed?

  Original title: backup of user account permissions?

  Hello

  I put permissions to my external hard drive so that it is accessible only by my account. For everyone, access is denied. I want to save permissions, in case my computer breaks down. How can I do this?

  I have only set permissions, not encrypted the files on the disk.

  Hello

  I will certainly help the question of fixing.

  Taking backup of permissions is not possible from your computer to an external hard drive. However, you can set a password for your external hard drive, so that you can access it from any computer that has administrative privileges by entering the password.

  For reference:

  Overview of BitLocker Drive encryption

  http://Windows.Microsoft.com/is-is/Windows-Vista/BitLocker-Drive-encryption-overview

  I hope that the information above helps you.

• ASA Site to not tunnel no transmission of traffic for some subnets after awhile

  Hello

  We have a question really strange tunnel from site to site on several ASAs.

  We organize VPN tunnels between a small site and three largest.

  The den has an ASA 5505, the other three principles are ASA 5510.

  One of the tunnels working for months without problems.

  Each tunnel has several class C network.

  example Site:

  -192.168.50.0/24 (named A1)

  -192.168.51.0/24 (called A2)

  Site b:

  -192.168.60.0/24 (named B1)

  -192.168.61.0/24 (called B2)

  On two faulty tunnels, all is well at the beginning. After a few days (1-14) some networks to cease to work. So I can ping both A1 and A2 B1 network networks, but only from A2 B2 network. Pings from A1 to B2 doesn't expire. The ASA site showed tx = 0 traffic for <=>A1, B2, but progressive count rx traffic. ASA b it shows rx = 0 to B2<=>A1 and tx counties upward.

  This happens unexpected after different periods. Sometimes he hits ASA on site B, where tx = 0, it is sometimes ASA on A site.

  I tried to fix it as a result of orders:

  ISAKMP crypto claire his
  clear crypto ipsec his
  clear xlate

  but nothing has worked. The only solution for now is to restart the ASA where tx County indicates 0. After restarting, everything goes well for a while.

  On one of the affected sites, we have a failover configuration - ASA. A failover of the active device also solves the problem. But if you change your prior back restart the old principal question will return immediately.

  I think that there is no configuration because:

  -All tunnels are configured in the same way, and one of them is running for moths without any problem

  -Tunnels work for all combinations of subnet after a reboot

  -The problem occurs after different and long periods of time. So I think that the period between failures is long to be caused by tunnel a.s.o. timeouts.

  All ASA are running 9.1. (5) 21.

  I updated the firmware of several releases these past few months and had the same problem with any version I tested.

  So I hope that someone else has also had this problem and found a solution.

  Christian Hey!

  Hopefully, solve or find the root cause?

  Thank you

• Trying to neighbour my VCS for an external VCS

  I'm trying to my local VCS for an external VCS of the neighbor, but when set up the neighbor as well as the rule of research I can dial is no longer the local alias I've preconfigured only the pseudonym of endpoint devices.

  It seems that if you added the rule of neighbor search area above your local area search rules.  In general, you should set the priority of your rules look something similar to the below.

  1. Local areas
  2. Neighbour areas
  3. Crossing Zones
  4. DNS zones

• How to disable for the external hard drive restore point in Windows 7

  System Restore performs a restore point for my external hard drive, which I did not need, how to change that?

  Hello

  Click Start, right click on computer and select Properties.

  In the left menu, select the System of Protection.

  In the Settings of Protection section, click on the external drive letter.

  If the external disk drive appear on protection, click on the Configure button.

  Select the option to disable the Protection system for this drive.

  Click Apply/OK.

  This should return all the disk space used for System Restore on this drive.

  Let us know the results.

  Concerning

• How can we get the details of the traffic for the spaces for example, users access report by place (all users)

  How can we get the details of the traffic for the spaces for example, users access report by space (for all users), DB tables can be used to get information, such as for example: users who have logged in - never

  You can use analytics. WebCenter Analytics comes with a number of events out-of-the-box for which it brings together measures which are very useful.

  You can check in the WebCenter Analytics database schema. WebCenter Analytics Dashboards are present in the scheme of ACTIVITIES and are modeled in the form of a star schema.

  The schema includes 2 types of tables. FACTS analytical tables are used to store instances of specific events. For each event, a specific FACT table is present, for example for page views, the views of space, connections and so on. These tables contain a timestamp for the moment, that the event is occurred and integer ID these descriptive reference data stored in DIMENSION tables.

  DIMENSION tables contain descriptive information about the entities associated with events. Size examples are pages, applications, groupspaces, users and so on.

  See the details of the table all the under http://docs.oracle.com/cd/E23943_01/webcenter.1111/e10148/jpsdg_app_aschema.htm#JPSDG10767

  If you want to custom event.that track, as you can get. see this blog entry

  Quobell technology - portal WebCenter: WebCenter Analytics: define and save custom events

• How can I change the default program for the external application Editor?

  I read on the directions for this line and it reads "select a file type in the left pane."   I don't see where it is in the left pane.  All I see in the left pane is 'The browser start Pages' and a 'How do I' pane.  Nothing with the file types.

  Hello

  Welcome to the Adobe Forums.

  In order to change the default program for the external application Editor. Please follow the instructions below.

  Click on the Edit menu, then choose Preferences.

  Once the dialog box is open.

  Click on file publishers.

  In the left pane, you will find all types of files that you want to change.

  On the right, you'll find publishers for this specific file type.

  If you want to add any other application, you must click on + symbol at the top of the right pane.

  Select the path of the application that you want to apply.

  Click Open.

  If you want to primay you can click available main option at the top right. For more detials please check the screenshot below.

  

  Kind regards

  Rajeev

• HP 15-r151nr: traffic for HP 15-r151nr cooler

  Hello!

  My laptop have no cooler. But it took place in it. What is the model number of compatible cooler (if it exists) and how or where St. Petersburg (Russia) I can install it?

  Thank you.

  You don't need not. You have the Bay Trail processor Intel Pentium N3540, and they are made to be cooled passively.