AT300 / Support for German external keyboard?

Similar Questions

• Technical support for Microsoft wireless keyboard

  Is it possible to order the small antenna USB for my Microsoft 2000 wireless keyboard/mouse combo model? If so, how.

  Hello

  Here is contact information for support of Microsoft Hardware.

  Contact support | Microsoft Hardware:

  http://www.Microsoft.com/hardware/en-us/support/contact-us

  Concerning

• Support for two external monitors on X 201

  Hello world

  I would get a mobile X 201. However, I wonder if it would be able to support two external monitors with the X 200 ban.

  I hope that run two monitors at 1080 x 1920 (essentially two 22 "IPS panels rotates 90 degrees).

  Would it not able to support that?

  Yes you can do it, it could be done in laptops, made several years ago.

• How can I connect my external keyboard for apple iPad 2 to my new iPad 2 Air?

  How can I reach my 4 year old apple wifi external keyboard that I used the old iPad 2 for my new iPad 2 air?

  What is a bluetooth keyboard?

  You'll have to maybe disable your old iPad then, matching to ensure that bluetooth is activated, pair it with your new ipad

• How to disable WiFi for Portege R830 + Port Replicator & external keyboard

  Stupid question I know, but it's driving me crazy.

  I have an external keyboard Port duplicator and the attached monitor. The Port Replicator has a wired Ethernet connection to my local network. When I anchor my R830 in Port Replicator, ideally I would like to turn off the wireless adapter, but at least I certainly want the default use of the wired LAN connection not WiFi.

  Currently, it seems just randomly decide to use wired or wireless connection when I anchor.

  So, two part question:

  1. How can I pay the R830 automatically default to an Ethernet cable when I anchor?
  2. How can I turn off Wi - Fi when I am connected and using an external keyboard (the toggle F8 to activate wireless switch on the keyboard of the laptop does not work on external keyboards)

  Thank you very much in advance for your advice.

  > How can I set the R830 automatically default to a wired Ethernet connection when I anchor?
  If the port replicator is connected to the local network and then the laptop would use the LAN connection automatically if you connect the R830.

  > How can I turn off Wi - Fi when I am connected and using an external keyboard (the toggle F8 to activate wireless switch on the keyboard of the laptop does not work on external keyboards)
  Well, in this case, you can use the internal keyboard to turn off the WiFi using Fn + F8

• 0076WE remove USB-support for Scandinavian keyboards?

  The latest system available update (0076WE) outputs seemes usb support for Scandinavian keyboards, and I get put in English on USB keyboards whatever I do (on the folio from Lenovo and other USB keyboards).

  The virtual keyboard always takes care of the Scandinavian characters, and I can force Scandinavian installation connecting to Terminal servers and locking of the keyboard in the application.

  Someone at - he had a trick to solve this problem, or is the only option to wait for the next update of the system and hope it fix it?

  I found a solution, to run a full package of discount. The Scandinavian keyboard is working again.

• Passport system: Add support for scrolling through the physical keyboard

  Hi guys,.

  as you know peripheral Pasport is the new support feature: scrolling in the list view/Scroll through the physical keyboard. It seems that this function should work automatically, but it is not working at all in my application. It works only partially to control the display of Web pages and only on the pages of the subsites of my web content.
  Looks as the root cause of this issue is the list view must focus to handle keyboard events. OK, so the workaround can be call requestFocus() on the list view. It's a job but only until I do not touch the other control or scroll this list via the screen point of view! Or for example my app can show popup by clicking on list view and when this popup will be rejected the focus won't return to the display of the list...

  So my question is what good way to add support for this feature? Do I really need to play with requestFocus()? Or maybe there's a simple way to always keep the focus on the display of the list?
  I really need help.

  I've added a few features such as

  requestFocusForScrolling()

  then get the signal of this active tab has changed, you can call this function to get the new focus

  or on NavigationPane if returning to onPopTransitionEnded () calling the requestFocus on page function now on top

  In my Pages, I always have a few features added like connect(), disconnect() cleanUp() init() and now also at the request of focus. In a few pages, these functions are empty, but I can use them in the generic functions where I only got one Page

  ----

  not easy to touch OS oriented to add a key activated area outside the screen

  It always depends on the field with the development: think of an Image when you change the size of gestures touch on keyboard or take a look at sales-charts where you "scroll" in the months of keyboard

  Same pages may also have ScrollView and/or one or several ListView - it's do you stunts where is the update for keyboard gestures.

• How to install an external keyboard for PC laptop Toshiba

  The laptop keyboard types constantly v.  It will not stop type v.  I tried to update the keyboard driver, but Microsoft says that the best driver is installed.  I tried to join and external keyboard, but the system returns to the wrong keyboard and stop typing v.  I can't control panel because I can't use a keyboard.  Help!

  Subsequently, you will need to change the keyboard on another. I say this because the normal desktop keyboard has a Fn key that, in conjunction with other keys, material control. In the meantime, you will have to unplug the laptop keyboard. But first, you will need to learn how and the best way is via Youtube if you want to do it yourself, and if go you as far as delete, you can as well order a new one on eBay and do all the work at once...

• Magic of Apple external keyboard, not ctrl alt del

  Hi all

  I have an old MacBook Pro (2011) and recently I build a small office area at home where I connect my laptop to a bigger screen and use the mouse Magic Mouse from Apple, as well as the new keyboard of magic.

  In OS X, everything works as expected, but when I start Windows using boot camp on the external keyboard does not work properly.

  It does not change the BACKSPACE to a delete key once you press fn. That much I'm already sure of since I tried a keycode scanner.

  When I finally go through the logon screen using a work around with the keyboard on the screen, I noticed that none of the special keys like volume up/down or works of brightness - that's all simple F - keys.

  I reinstalled Windows and asked to download the latest drivers for supported boot camp and it's always the same question.

  Someone of you know the same behavior or is there maybe someone here with a solution?

  Thank you

  -Kim

  1. Please check Control Panel-> system-> keyboard to Boot Camp settings.

  2 try using Fn + Ctrl + Alt + Delete on your keyboard Apple when you access Windows.

  3 make sure you have the Apple keyboard driver installed in devices-> HID devices or devices-> keyboard.

• Portege R700 - FN keys emulate external keyboard

  My R700 is connected to a port replicator Port speed Hi and external USB keyboard. I would like to access the function keys of Toshiba on the external keyboard, which means I need to emulate the key FN from Toshiba.

  I've seen references to other models of laptop Toshiba HW Setup and solutions including a BIOS setting, but none of these options appear to exist on my R700.

  No doubt there's a simple answer...!

  Hey,.

  Unfortunately, I think that's not possible. There is no external keyboards on the market where you can emulate the notebook FN keys. In addition the laptop must support this feature and that s that I don't not known.

  I put t know why it is so important for you but I think that you should always use the internal keyboard FN keys.

• Missing labels of power management on the external keyboard, wireless mouse, wireless mouse, all different brands

  On my laptop HP HDX18 only the touchpad and keyboard have power management tab to enable them to wake the computer.

  My external keyboard of Firefly, wired Kensington mouse and Logitech wireless mouse all have not the power management tab. I wrote to Logitech about this and they said that I needed new ACPI/USB drivers. I installed the latest Intel chipset drivers I knew from the updated HP drivers website.

  HP told me that it is normal, current is cut for USB hubs. Which is ridiculous. I have disenabled the selective suspend for the USB ports under settings in Device Manager and power went to each USB hub and unchecked "allow the computer to turn off the power of the device", which can be the meaning of HP. I have the latest version of the BIOS. But still no power management tab is displayed.

  Hi Oldroser,

  Please see the article regarding your question:

  http://Windows.Microsoft.com/en-us/Windows-Vista/troubleshoot-power-problems

  I hope this helps!

  Debra
  Microsoft Answers Support Engineer
  Visit our Microsoft answers feedback Forum and let us know what you think

• CAN´t define a proper resolution for UltraWide external screen 21:9 (2560 x 1080 px)

  After the installation of macOS Sierra my external screen shows only 16:9 (1920 x 1080 px with black bars on each side). He used to work before I updated. Now the correct resolution is not even appear in the display settings on my MacBook Pro (end of 2015). I don't want to use or pay for any external software, please fix this.

  It seems to be a common problem: macOS Sierra no longer supports monitors ultrawide?

• Keyboard MacBook does not synchronize with external keyboard

  I have an external USB (Logitech K520) keyboard and is not sync with the MacBook keyboard.

  What I mean with "sync": for example, when I press shift on the MacBook, and 'a' on the external keyboard he wrote 'a' instead of 'A '.

  Another example: I press cmd on the MacBook and the 'c' on the external keyboard, it does not copy the selection

  It worked on my old ThinkPad. I can work on a Mac as well?

  The solution is here: rd-to-accept-modifier-key-input-from-macbooks-i http://apple.stackexchange.com/questions/131287/how-to-get-external-apple-keyboa

• It is only five years, since I bought the MBP. And "not Stopped Apple hardware support for this products just because they sell it?

  Hello

  I have a 17-inch, mid 2010 MBP.

  The internal DVD drive is broken.

  I contacted the Support of Apple. And sheet metal tech me that "Apple does not support any material for the MBP.» And what I can do is to get an "external DVD drive.

  It is only five years, since I bought the MBP. And "not Stopped Apple hardware support for this products just because they sell it?

  Ed

  < re-titled by host >

  If your computer is on this list it is no longer supported: Vintage and obsolete products - Apple Support

• Turn on/off wireless so that the laptop is connected (external keyboard)

  Portégé R700-184
  Part number: PT311E-02Y01JEN

  Hello

  Can someone tell me how to turn on/off wireless switch using an external keyboard for docking station is the R700 while it is on it?

  We only seem to be able to turn on/off wireless by using the key on the keyboard (Fn + F8) construction.

  Also, is there anyway that wireless can be turned off by default at startup upward? Is this something that can be done through the BIOS, or perhaps by twisting a registry key?

  Grateful for any help.

  :-)

  I have a better idea: as you know you can use Flash cards to move the pointer on the top and in two mouse clicks, you can turn off WLAN.
  So you n t need special option for external keyboard or anything else.

  Open flashcards settings and activate the option allow the mouse to bring up maps, click on map of F8 and choose the option you want.

  It is very easy.