Training of Director 11

Hi everyone, I am a newbie and want to know if there is no specific training Diector 11. I saw Director MX 2004 but no Director 11. I have experience of Flash CS3 and would like to see what this product can do with my e-learning applications.
Thank you
Richard: smile

There is nothing specific D11 - he only has been published. But
anything related to MX 2004 remain valid, except something to do with
Scenes of Havok Physics.

Tags: Director

Similar Questions

  • Can PCI 6602:How I use digital lines of the Board of Directors and at the same time to generate trains of pulses by using a meter?

    Hello!

    My problem appeared when I tried to update my traditional NOR-DAQ legacy code to DAQmx.

    I use 2 meter (meter 5 and 7 meter) on PCI-6602, to generate trains of pulses, as well as the lines of e/s digital port 0 (the form lines from 0 to 7). What I do in my request, it's that I'm starting to generate the pulse train on the output of 2 meters and after that I play with the State of digital lines.

    Traditional, it was no problem to use the meters and digital lines at the same time, everything went perfectly, but in DAQmx, is not possible.

    What's happening: I start generating train of pulses on the output of counters, no errors, but when I try to change the State of a line of digital port the generation of the pulse train is stopped. What happens when I start the task associated with the digital way.

    My question is: is it possible to create a channel on digital lines without changing the channels created for meters?

    Another thing that I managed to do with the panels 'Measurement and Automation Explorer' and Test for PCI-6602, is basically the same thing, I generate trains of pulses on the output of the 7 meter and try to start a job on the digital line, but I get an error:

    "Error-200022 occurred in test Panel.
    Possible reasons:
    Measurements: Resource requested by this task has already been reserved by another task.
    Device: Dev4
    "Terminal: PFI8.

    On the contrary if I use the counter 0 or a counter 1 to generate trains of pulses I encounter the same problem.

    What resources are used by 2 to 7 of the PCI-6602 card counters and the counters to 0 and 1 do not use?

    Thanks in advance for any answer!

    Ciprian

    After doing some real tests on this device, I found that it is a normal behavior for the jury of 6602.  This is because when you start a task digital all 32 lines are configured for digital i/o, so it replaces your meter operation.  The article below the link explains a little more on this subject.  You must start the digital task before the task of counter to use the features of both in your program.

    2 meter and above will not work correctly when you perform digital i/o on NI 6601 or 6602

    http://digital.NI.com/public.nsf/allkb/43F71527765EEC3886256E93006CD00C?OpenDocument

  • Director PeopleSoft training

    Hello

    1 - What are the main tasks of a PeopleSoft Director?
    2-can you put in place steps to learn PeopleSoft administrator tasks and maybe some links?

    Thank you.

    Hello

    Please check the below bolg and could be useful to you on the same.

    http://psdba4u.blogspot.com

    Thank you

  • Counter/Timer Pulse Train generation

    Hello

    I'm having some difficulty to understand why a particular VI I does not work (upper part of the image below), I was wondering if someone could give me an idea of the cause of the error message.  I have a counter/timer, which I use to generate a pulse train.  It works very well on samples of "continuous", but when I turn it on to 'finished samples' I get an error of "resource is reserved" when it comes to the DAQmx VI of 'play '.

    I made an another VI (lower part of the image) and it works very well with finished samples.  So basically I wonder what's different on finishes versus continuous sampling which could cause a resource to book or not. (the Board of Directors is a PXI-6281 if it matters)

    Thank you

    Adam

    OK, I just looked through the manual and it seems that when you do a finish on a counter pulse train generation, the jury must in fact to divert the OTHER counter.

    This may have been aparent earlier if the error message about what resources he tried to get was more prolific.

    In any case, problem solved I guess.

  • Trainer P3005 P3005: Card and networking

    Hello everyone, I have a P3005 which was originally bought as a non "N" machine, (I think it was cheaper for them at the time), so it was connected via a direct parallel to an external jet cable. trainer went bad and I replaced it. the new trainer, they ordered is not a parallel to this topic. It has an ethernet and usb (had to remove the back leg to get even the map to place such that there is no opening of the ethernet on the media).

    so the machine does not see the ethernet while it is plugged, the I\O menu has only an option of I/O waiting period, no option to configure an IP address or anything like that. I thought installing the interface was all in the trainer card, so when I replaced it, he can see. but apparently not.

    so question is, is it possible to get the Ethernet to work on it? I thought firmware but the map FW datecode 20141217 02.190.3, which I think is the most recent. or maybe it's a different trainer is going to do?  I do not think that this machine (or at least don't see anywhere) will support or connect to a stream. This is possible in a machine of "N"? or if not, what else on the machine it would block?

    Thanks for any help

    The network port can be used but won't unless you have the necessary memory.  The base model came with 48mg or RAM and network model comes with 80 MB of ram.   You need to add I think that a chip from 32 Meg to the Board of Directors and the network card will be considered.  The reference is CB420A.  Just check the memory on the config page, and if it is 48 MB and no chip in the slot, then 32 is all you need.  If less 48Mo then you will need 64 MB chip.   If it still does not just add an EIO network card into a slot on the trainer.  It should work as I have used the cards myself.

  • Compellent training

    I was considering taking the class Compellent 4 days of Administration and advanced management training.

    Everyone took and it is worth $ 5000?

    We have recently installed a Compellent SAN in a primary/DR configuration and I am a newbie.

    Thank you

    I took the class of Directors 4 days leave and found it very useful.  I have over 15 years of experience of SAN, so I went with a sober opinion regarding the quality of the class.  I was very impressed by the instructor and hands on opportunity HW being new HDS in time.  I should mention that I went to one of these sites from Dell which added to the experience.  In the other Dell training I took I did not always have hands with the DJ, but they always provided hands on Labs on the associated SW.   A benefit to taking the class and become certified you will be able to make your own installs and HW upgrades as long as you keep you certified installation status. (Requires an annual update for a cost of several hundred dollars online).

  • HP has solved the problem of trainer P2015.

    Gentlemen.

    In my company we have over 100 P2015s. Many die because of the problem of well known trainer. These units are no longer under warranty. We decided to buy about 50 trainers to fix these, but until we do - new trainers will be redesigned advice? (I hear they discovered the circuit which caused the problem).

    Thank you

    COD

    This may sound crazy, but our p 2015dn had the same problem until I cooked the trainer as jury said on another forum.  I deleted the Board of Directors of the printer does not work, dissolving the plastic on the right tape/coating, then preheat the oven to 350f, place the Board on three balls of foil on a cookie sheet, let Cook for 8 minutes exactly, removed and let cool and then installed and have now a printer to work again!  Try this with a bad formatter board - what do you have to lose.  May be a low soldier joint in the manufacturing process. But I have worked for me.

  • Adobe Flash plug-in facilities for the compulsory training courses

    Hello.. We have an environment that uses IE 11 on PC under Windows 7. There are about 300 users who will need to take this training. The problem is, the Adobe flash plugin requires administrative access to install. There are others who use different browsers, but most of the time IE 11 is used. When I tested it on we could not launch the course without the plugin and we could not install the plugin without administrator rights. Another in my Department thinks that it will install without admin rights, but from what I experienced after testing with multiple users, the installation of the plugin on IE browsers requires admin access. I would like to know if there is a more fast/best way to get this plugin installed without doing it manually on all machines in 300?

    The version of Flash player on each PC varies, some need to be updated, but some are the most common available for the OS from W7.

    Thank you

    Hello

    Yes, Flash Player written in protected directories, as such, need administrator rights.  However, according to your post, it seems that you distribute Flash Player in your org.  If so, you will need Flash Player to license for distribution (free for most use cases).  Once you apply for a license, you will have access to full installers MSI and EXE that you can use to distribute Flash Player via any number of tools of software, such as Microsoft SCCM distribution, among others.

    Apply for a license to go Adobe Flash Player Distribution. Adobe

    More information on the distribution of Flash Player are available in the Flash Player Administration Guide.

    --

    Maria

  • Storage - EMC or NetApp training? -What is the opinion which continue to increase identification of Collect information?

    Storage - EMC or NetApp training? -What is the opinion which continue to increase identification of Collect information?

    I get a lot of job opportunities for VCPs with storage capacities. I work with the directors of storage on all commitments but don't go or experience. Which storage certification I should continue to allow me to work as a PCV with extra storage responsibilities? My experience has been with EMC, NetApp and 3Parr on fiber, NFS, and iSCSI. What training and certification provider would be better or at least the first to continue?

    Thxs

    Both are huge players in the world of virtualization and thus increase your VCP - I would lean more towards the EMC cert just because of the VCE (VMware, CIsco and EMC) company

  • How to download Insider page adf training sessions in OTN?

    Hi, is anyway we can download training sessions recorded in the Oracle ADF initiated in the JDeveloper Homepage in OTN page? I catch a flight of 14 hours from SFO to attend the Fusion Apps extend with ADF and I want to use this time to go through the sessions as long as I can.

    Please let me know if this is possible. Thank you very much.

    Please see this video if you observing rather than read: http://youtu.be/OMGvk2tsJgI

    I have a bunch of these recordings on my android. I use IE to retrieve the data since I do not know where chrome stores files... The easiest way is to
    1. open IE, go to tools, Internet Options and then delete all files to keep the number of manageable files.
    2. tap on settings. Press display files. The trick here is that you do not see the files. On my machine, it opens a window of the Explorer to:

    C:\Users\stuart\AppData\Local\Microsoft\Windows\Temporary Internet Files

    Next, you need the path with 'low' suffix

    C:\Users\stuart\AppData\Local\Microsoft\Windows\Temporary Internet Files Low

    Then you can see the Content.IE5 folder. Double-click to open. There are a number of directories with strange names like "R5F4PKNF". Double-click to open it. You can now see where the files are stored but most likely, you can't see all of the files you deleted the files in step 1.

    Now open the window IE different and go to the ADF Insider video series in IE. You don't have to play this, but make sure that video at the end manages (downloads entirely). You can do this by clicking on the 'line' that you see as the video progresses.

    RETURN to the window of Windows Explorer that has directories of internet files and start clicking on directories to see the new files. You will see either the files .flv or mp4, ex adf_security2 [1] .mp4

    Copy this file to another computer. Repeat with different videos. You can run a few videos at the same time.

    It is easier than it sounds, I just wanted directions to be thorough. I hope this helps.

    For the youtube videos, I use www.keepvid.com

    Published by: Stuart Fleming on 22 August 2012 20:00

  • CARS @ Oracle University training, advice please

    Greetings,

    Can you talk about the environment @ Oracle university for the training of RAC database? They will give training in environment of configuration database RAC or simply on virtual machines.

    What is the advantage/difference between Oracle training @ & training in a Training Institute.


    We are being implemented Oracle 2 node RAC11g db with 2 node application server 10 g (R3) on solaris...



    Thank you very much

    Concerning

    I currently teach the Oracle RAC University course.

    There are 4 'normal' ways of this form of courses OR to take:

    -In one place OR using equipment of the Oracle.
    -To a situation of partner OR using equipment of the Oracle.
    -To a situation of partner OR partner devices;
    -At the customer on their equipment.

    The first two grounds involve the participant being in a classroom, computers that run the FCAC to another centre and VNC sessions of the workstation class computers CARS. As long as the network is OK, it's a fantastic way to make the course of the ORGANIZATIONAL unit. (Being a partner of the OU, I am biased toward the second or third.)

    The third has some possibilities.

    -In one, I provide 2 computers with multiple network cards to each student (or team of 2 students), more a FireWire drive double head, or one additional computer that is configured as a server of OpenFiler iSCSI drive. The classroom is equipped with 2 or 3 GB switches. (I use 3 If iSCSI.) Students can install Linux and RAC and clusterware.

    -In another, the Center provides a larger machine, and we have 3 VMs... one like OpenFiler and two as a pre-configured with Oracle Enterprise Linux RAC nodes.

    The fourth is the most interesting, because I end up going in a week before of time (at the responsibility of the customer) and the configuration of their equipment to meet the class structure.

    In all cases, the course material is the same... Conference + lab to install clusterware, ASM, RAC, administration at every level, performance analysis, specific to CARS and tuning show how to implement the failover of applications and early notification of applications and application design from HA and performance.

    A common mistake by customers is to send only DBA. RAC depends on the system, network, and disk directors working with the DBA and they MUST be trained as well.

  • Can I get training on site for my employees?

    I have a team of employees who are not the right users of our devices iPhone Mobile 6.  Most simply use their phones as phones (phone/e-mail-mail/text and the occasional photo).

    Ideally, I would like to have a trainer come to our national sales and make a training session with them:

    This course (or a version of it for about 50 vendors) would be perfect, I think.

    iPhone Basics (in English)

    New to iPhone? This workshop is a great way to learn about the new features and pick up some tips, tricks and practices.

    Is this possible?  Anyone know who I would contact to get there?

    THX

    You can contact your local Apple store and ask them

    In my view, there are also 3 parties that could help you with this

  • No app training begins

    Desde as actualice a mi Apple Watch watch OS 3.0 series 1 of 38 mm aluminio. No puedo iniciar app training.

    Necesito UN saber as tengo that hacer para vuelva has the normal. MUCHAS gracias.

    Hola

    Following steps can help has:

  • Distance and rounds of training swimming errors

    Hello...

    I have the new Apple Watch series 2. I make the swim in our pool inner community twice a week, and I used the new watch swimming twice now. Both times the watch Gets the distance of towers and evil. Here are some details:

    Our community pool is 25 yards - long we checked this by measuring it ourselves. I use the session pool swim.

    The first time I used the watch, I swam 44 laps, which is 1 100 yards. Training app reported that I had made 62 laps and 1 550 yards.

    The second time (today), I swam 50 laps, which is 1250 yards. Training app reported that I had made, 80 laps and 2000 yards.

    I always swim in the same way,-1 lap breaststroke of 2 rounds side stroke, rear race 1 lap. Then, again. I don't have flip turn.

    Any ideas or help greatly appreciated.

    Hello

    I suggest that raise you this issue with Apple supports, taking advantage of your initial 90 days of free technical support by phone of the coverage:

  • Can the Apple Watch of training app take "tricks" during your workout?

    The application of the workout on the Apple Watch can loosely last "tricks" during your workout?  Can you do you run?

    -Thanks!

    Hello

    To mark a segment (for example one lap) during running exercise using integrated workout app, you can double-click the screen. The display briefly shows the stats for this segment. Segments can be examined after training through the activity on the matched iPhone application:

    You can also find that a third-party application meets your needs. To learn about the characteristics of third-party applications, I suggest you consult the descriptions of app developers and their support resources. For example:

    If you don't find the specific information you're looking for, you can ask the developer directly. This is usually possible through their support resources (you may need to create a free account in order to be able to connect). They may also be open to feature requests.

Maybe you are looking for