Dell vostro 1700 with windows 32-bit vista a error windows\system\winload.exe file is missing or damaged

Similar Questions

• help \Windows\system32\winload.exe file is missing or damaged

  Windows does not start, the computer will not load or meet recovery disk, HOW or WHAT DO I NEED TO DO TO FIX PROBLEM

  \Windows\system32\winload.exe SAY FILE IS MISSING OR DAMAGED.

  Hello

  1. what operating system do you use?

  2 did you change on your computer?

  Method 1:

  I suggest you to follow the links and check out them.

  Startup Repair

  http://Windows.Microsoft.com/en-us/Windows7/products/features/Startup-Repair

  Startup Repair: frequently asked questions

  http://Windows.Microsoft.com/en-us/Windows7/Startup-Repair-frequently-asked-questions

  Method 2:

  How to use the Bootrec.exe tool in the Windows recovery environment to troubleshoot and repair startup issues in Windows

  http://support.Microsoft.com/kb/927392

• How to enable bluetooth in dell vostro 1015 with windows 7 starter 32-bit

  How to enable bluetooth in dell vostro 1015 with windows 7 starter 32-bit?

  [Moved from comments]

  Dilip,

  It would take a special function key to turn on the Bluetooth on the computer. You can consult the computer manual or contact Dell for the same thing.

  In addition, you can view the article-

  http://Windows.Microsoft.com/en-in/Windows7/connect-to-Bluetooth-and-other-wireless-or-network-devices

  http://Windows.Microsoft.com/en-in/Windows7/add-a-Bluetooth-enabled-device-to-your-computer

  http://Windows.Microsoft.com/en-in/Windows7/change-settings-for-a-Bluetooth-enabled-device

  To let us know.

• Reference Dell vostro 1520 with windows xp prof... Not reading CD/DVD

  Reference Dell vostro 1520 with windows xp prof... Unable to read & play any cd/dvd.tried mr.fixit content but no solution at the moment.

  Hello

  1 have. what fixit you tried?
  2. don't you make changes to the computer before the show?

  Your CD or DVD drive is missing or is not recognized by Windows or other programs
  http://support.Microsoft.com/kb/982116

  Important: To do: Important This section, method, or task contains steps that tell you how to modify the registry. However, serious problems can occur if you modify the registry incorrectly. Therefore, make sure that you proceed with caution. For added protection, back up the registry before you edit it. Then you can restore the registry if a problem occurs. For more information about how to back up and restore the registry, click on the number below to view the article in the Microsoft Knowledge Base: 322756 (http://support.microsoft.com/kb/322756/) how to back up and restore the registry in the window.

• PC with Windows Vista does not restart after installing updates, "Windows could not start...". "File:\Windows\system\winload.exe status: Oxcoooooof.

  Last night, I installed Windows updates on my HP Pavilion dv6227cl and now Windows will not boot.  I get the message "cannot start Windows.  A recent hardware or software change might be the cause.  File:\Windows\system\winload.exe status: Oxcoooooof Info: the selected entry could not be loaded because the application is missing or damaged.  I DO NOT have the Windows Setup disc.

  Hello

  I suggest you borrow the CD of windows vista to your friends

  Method 1:

  Step 1:

  I suggest you check in safe mode.

  Start your computer in safe mode

  http://Windows.Microsoft.com/en-us/Windows-Vista/start-your-computer-in-safe-mode

  Step 2:

  If you be able to start your computer in safe mode, I'd say make clean boot and check.

  Place the computer in a clean boot state, then check if it helps. You can start Windows by using a minimal set of drivers and startup programs. This type of boot is known as a "clean boot". A clean boot helps eliminate software conflicts.

  How to troubleshoot a problem by performing a clean boot in Windows Vista or in Windows 7

  http://support.Microsoft.com/kb/929135

  Note: After troubleshooting, make sure the computer to start as usual as mentioned in step 7 in the above article.

  Method 2:

  I also suggest you to see link and check.

  Error: Windows could not start. A recent hardware or software change might have caused the problem after installing Windows updates

  http://support.Microsoft.com/kb/2674065

• How do you remove Trojan horse from the Windows\system\svchost.exe file located?

  How do you remove Trojan horse from the Windows\system\svchost.exe file located? I worked on this problem for 5 days. I've tried everything except wipe the hard drive completely and starting over. Windows xp pro sp3

  I bought a new diagnosis program and quarantined the virus once it has been identified. I tried to remove the virus in several ways, but it comes back. The best way that I thought would work enter safe mode and by changing the attributes of the svchost.exe file and then delete and checked the registry AWI hwo to the Web site, but it continues to be problematic.

  Hello

  During the uninstallation of antivirus/antispyware/security programs always check for an uninstall
  tool and/or removal instructions special to avoid leftovers.

  List of tools to clean/uninstall anti-malware programs
  http://answers.Microsoft.com/en-us/protect/Forum/protect_start/list-of-anti-malware-program-cleanupuninstall/407bf6da-C05D-4546-8788-0aa4c25a1f91

  Uninstallers (removal tools) for common antivirus software
  http://KB.eset.com/esetkb/index?page=content&ID=SOLN146
  ------------------------------

  Here's what I use and recommend: (these are all free and very effective versions.)

  Avast and Prevx proved extremely reliable and compatible with all I have
  launched on them. Microsoft Security Essentials and Prevx have also proven to be very
  reliable and compatible. Use MSE or Avast and Prevx, Prevx 3 but not all.

  Avast Home free - stop any shields is not necessary except leave the file system, Web,.
  Operational network (Script and behavior are also recommended in Ver 6 +).

  Prevx - Home - free

  Windows Firewall

  Windows Defender (is not necessary if you use MSE)

  Protected IE - mode

  IE 8 - SmartScreen filter WE (IE 7 phishing filter)

  I also IE always start with asset if filter InPrivate IE 8.
  (It may temporarily turn off with the little icon to the left of the + bottom
  right of IE)

  Two versions of Avast are available 6.x and 4.8 x

  Avast - home - free - 6.x stop shields you do not use (except files, Web, network, &)
  Shields of behavior) - double click on the icon in the Notification area - real time Orange - click on the
  Shield that you want to stop - STOP. To stop the Orange icon to show an error indicator-
  Click on the Orange icon - top right - settings - click on the status bar - uncheck shields you
  disabled - click OK
  http://www.avast.com/free-antivirus-download

  Avast 4.8 x - home - free - stop shields, you don't need except leaving Standard, Web,.
  and the network running. (Double-click the blue icon - look OK. - upper left - Shields details
  Finish those you don't use).
  http://www.avast.com/free-antivirus-download#TAB4

  Or use Microsoft Security Essentials - free
  http://www.Microsoft.com/Security_Essentials/

  Prevx works well alongside MSE or Avast

  Prevx - home - free small, fast, exceptional protection CLOUD, working with other security
  programs. It is a single scanner, VERY EFFICIENT, if it finds something come back here
  or use Google to see how to remove.
  http://www.prevx.com/   <-->
  http://info.prevx.com/downloadcsi.asp?prevx=Y<-->

  Choice of PCmag editor - Prevx-
  http://www.PCMag.com/Article2/0, 2817,2346862,00.asp

  Also get Malwarebytes - free - use as scanner only. If you ever think malware and that
  would be unusual with Avast and occasional Prevx running with the exception of a low level cookie
  (not much), to UPDATE and then run it as a scanner. I have a lot of scanners and they
  never find anything of note that I started to use this configuration.
  http://www.Malwarebytes.org/products/malwarebytes_free

  I hope this helps and happy holidays!

  Rob Brown - Microsoft MVP<- profile="" -="" windows="" expert="" -="" consumer="" :="" bicycle="" -="" mark="" twain="" said="" it="">

• Impossibile to "start Windows because the following file is missing or damaged. Windows system32 config system

  1. Impossibile to "start Windows because the following file is missing or damaged. Windows system32 config system

  The question was preceded by a loss of power, aborted reboot or abnormal termination? (This includes pulling and buttons power).

  These can cause corruption in the file system that must be fixed before you do anything else.

  If none of these events occurred (or even if they have not taken place), you must verify the integrity of your file system before anything else (especially "try" things).

  There is zero logic to start try to copy files to a hard drive with a corrupted file system so corruption of file system must be fixed first using the XP chkdsk program and run chkdsk can solve your problem completely.

  Use the XP Recovery Console to check the file system on your HARD drive and fix the problems and then try to start your system - this may be all you need to do.  Or, you are welcome to just start trying things that might work.

  Start the Recovery Console Windows using an XP bootable installation CD, or create a bootable CD from the Console of the Recovery XP (no XP media required).

  A CD of XP Recovery Console is not the same as the recovery disks that may have come to a store to purchase the system.

  If you have any bootable CD to run the XP Recovery Console or that you are not sure what type of bootable CD you have, can create a bootable XP Recovery CD of Console and don't forget (no support for XP not necessary).

  If you need instructions to create a bootable XP Recovery CD of Console, we can predict that too (just ask).

  After booting into the Recovery Console, you should be in this folder:

  C:\WINDOWS

  For each of your hard disk partitions, you must then run:

  Chkdsk /r

  For example, at the Recovery Console prompt, enter:

  CHKDSK c: /r

  Let chkdsk finish to correct the problems, he could find.  It may take a long time to complete or seem to be 'glued '.  Be patient.  If the HARD drive light flashes, it's something.  Keep an eye on the amount of the percentage to be sure that it is still making progress.  It may even seem to go back sometime.

  The chkdsk/r must be completed without error, you may need to run several times until it does.

  Remove the CD, and then type "exit" to exit the Recovery Console and restart the computer and the report with your progress.

• This computer does not meet the minimum requirements... when installing graphics Intel HD 4000 for my Dell Vostro 5560 with Windows 7 64 bit

  In recent days, I reinstall Windows 7 to my Dell Vostro 5560 and this laptop does not have a driver CD, I downloaded all the required drivers for my laptop directly from the Dell Support Web site. I started to install a step by step. Chipsets, Audio, network, MEI, etc... However, once I try to install graphics, this laptop comes with 2 graphics card, an Intel and another is Nvidia. So, I try to install first Intel. When I click on the exe file, a message box appears saying that «this computer does not meet the minimum requirements...» ». Why is - what happened? I'm sure that my laptop include Intel graphics. Please help me as soon as POSSIBLE. I want to install Windows 7.

  Some drivers of today require at least Microsoft .NET Framework 4.5. Is this possible?

  It is certainly. AMD demanded 4 .NET. x + for their installer drivers for several years already, but I think they have started including with their driver downloads recently.

  -I never noticed if Nvidia use .NET with their drivers Installer, install but .NET 4.5.

  Download Microsoft .NET Framework 4.5 of the official Microsoft Download Center

  .

• CyberDefender diagnosis claimed the C:\Windows\SysWOW64\defrag.exe file is missing.

  Original title: CyberDefender diagnosis

  This promo 'Double my speed .com' is a bait & switch. $40 for their 'diagnostic' software, then someone turns to sell you a package of $400 maintenance. A container of the slow cooker.   However, their 'diagnostic' has stated that this file is missing from my system:

  C:\Windows\SysWOW64\defrag.exe

  I have had a lot of wrong with my Firefox browser lock up lately (which the 'seller' useful said they could fix), so I came on this site to download it, but a search comes empty.  Has anyone concerned with that?

  Hi Benthoven,

  You can try to run the disc, defragment, and see if it works. If it works, then you can ignore the message of C:\Windows\SysWOW64\defrag.exe.

  Step 1:

  You can read the following article and try to run Disk Defragmenter.

  Improve performance by defragmenting your hard drive

  Step 2:

  You can read the following article to download the Microsoft Safety Scanner and perform a full scan on your computer.

  Microsoft safety scanner

  Note: When you perform the analysis, there are chances of losing the data that you can take a backup of important data before performing analysis.

  About Firefox, you can try to open Firefox in safe mode and see if it helps.

  For more information, you can check the support of Firefox at following link:

  http://support.Mozilla.com/en-us/KB/safe%20Mode

  If you need help, then you can get in touch with Firefox support.

  http://support.Mozilla.com/en-us/Firefox-home

  Hope this information is useful.

• When I turn on my dell computer vostro 1700 with windows 7, I get a pop up box in the lower right corner that says "complete audit log. What should I do?

  Windows 7 log in

  Hi tmmjr,

  Welcome to the Microsoft Answers community.

  a. Since when are you facing this problem?
  b. did you change to your computer recently?

  Perform the clean boot on your computer and check.

  From your computer by using a minimal set of drivers and startup programs so that you can determine if a background program is interfering with your game or program. This type of boot is known as a "clean boot".

  To perform a clean boot on a computer, follow these steps.

  1. click on start, type msconfig in the search box and press ENTER.
   
  If you are prompted for an administrator password or a confirmation, type the password, or click on continue.
   
  2. in the general tab, click Selective startup.
  3. under Selective startup, clear the check box load startup items.
  4. click on the Services tab, select the hide all Microsoft Services check box, and then click Disable all.
  5. click on OK.
  6. When you are prompted, click on restart.
  7. after the computer starts, check if the problem is resolved.

  Please follow the system in the boot environment. If the problem does not occur, it indicates that the problem is related to an application or a service, we have disabled. You can use the MSCONFIG tool again to reactivate the disabled one by one element to find the culprit.
   
  If your issue is resolved, follow the how to determine what is causing the problem section in KB article to narrow down the exact source.
  http://support.microsoft.com/kb/331796 . In addition, refer to the section on how to restore your computer to a Normal startup mode

  Hope this information is useful.
  Let me know if it worked.

  Thank you, and in what concerns:
  Umesh P - Microsoft Support

• Puzzles of liberation later I have a laptop Dell Vostro 1720 with Windows 7 Professional upgrade to a 64 format cannot be

  I like to keep the software up to date, but the latest version of Muse CC seems to let me. What can I do?

  Hello

  Please see the release notes, the new minimum requirement for Muse 2014 is Windows 7 or a later version. 64-bit version required. Mac OS x 10.7, or a later version. And unfortunately there is no way to install the latest version of Muse on 32-bit.

  Release notes | Adobe Muse CC

  Please let me know if you still have the issue.

• Card reader does not work for Dell Vostro 1710 with Windows7 (32 bit)

  Hello

  Since I have Windows7 (32 bit version) on my laptop card reader no longer works. I tried several cards smart cameras, but none worked. Does anyone have an idea how I can fix this problem? I think I need a new driver, but I do not found.

  Your help will be appreciated, thank you in advance.

  Best regards

  Weserkrabbe

  
  

• Startup problem, get an error missing: &#60; ROOT WINDOWS &#62; \system\ntoskrnl.exe

  OP: Start-up of the question

  I starts instead of windows displays an error coming. It says I'm missing: \system\ntoskrnl.exe. How can I fix it?

  Hello Gwafer74,

  This problem can be caused if the Ntoskrnl.exe file is missing or damaged. You can follow the steps described in the article for this problem:

  http://support.Microsoft.com/kb/314477

  Follow the steps in method 1.

  Thank you
  Irfan H, Engineer Support Microsoft Answers. Visit ourMicrosoft answers feedback Forum and let us know what you think.

• How can I correct boot.mgr is missing on a dell inspiron 1525 with Windows vista basic?

  try restoring back to fab

  Hello

  I suggest you try the procedure described in the following article to resolve the problem.

  Error message when you start Windows Vista: "the Windows Boot Configuration data file is missing required information".

  http://support.Microsoft.com/kb/927391

• How can I install my printer model Dell 720 on my new Dell XPS 8500 with windows 7

  I have the software for my Dell 720 printer, but it will not install on my new Dell XPS 8500 with windows 7.  It works fine on my Dell Dimension 3000 with windows XP.  I would use this printer with my new system

  Dell is not a Windows 7 driver for this printer.  The closest thing they have is a driver for Vista 32 bit.  So your options are to (1) Download 32-bit Vista driver and try to install in compatibility mode, (2) use XP Mode if you have the professional or Enterprise version of Windows 7 Ultimate, (3) buy another printer.

  You can download the Vista 32-bit driver

  http://www.Dell.com/support/drivers/us/en/19/product/Dell-720

  Good luck.