tranparencies printing on laserjet p1505n

Similar Questions

• I have two printers. One of them: hp Laserjet P1505n just stop printing. the other is fine. Windows 7. Please notify

  I have two printers. One of them: hp Laserjet P1505n just stop printing. the other is fine. Windows 7. Please notify. Thank you.

  I suggest you to uninstall and reinstall the latest compatible drivers for Windows 7.

  You can also run the troubleshooting of the printer.

  Open the printer Troubleshooter

  Open the printer Troubleshooter by clicking the Start button, then Control Panel. In the search box, type troubleshooting, and then click Troubleshooting. Under hardware and sound, click on use printer.

  For more information, visit the below mentioned link:

  http://Windows.Microsoft.com/en-us/Windows7/open-the-printer-Troubleshooter

  Printer problems: http://blogs.technet.com/b/markrussinovich/archive/2010/04/12/3324570.aspx

  Run the printer problems to: http://support.microsoft.com/gp/printing_problems?entrypoint=WHHT

  You can see the below mentioned links.

  http://Windows.Microsoft.com/en-us/Windows7/install-a-printer

  http://Windows.Microsoft.com/en-us/Windows7/find-and-install-printer-drivers

  http://Windows.Microsoft.com/en-us/Windows7/change-your-default-printer

  http://Windows.Microsoft.com/en-us/Windows7/printing-to-the-correct-printer

• LaserJet P1505n printer: How can I change the host name to NPI1BDC68 to meaninful something more?

  My network, a HP LaserJet P1505n printer, host name is set to NPI1BDC68. Is this cable or is there a way for me to change? Trying to solve: manuals were reviewed, Forum questions were searched, google General search conducted. I am running Win XP and a Mac Pro with OS X 10.6.8.

  Well, which took me 10 minutes to solve.  I found the answer on a HP site based in France. (I kinda changed my google query and tried again.)  The site asks on first access, if you wish to continue in English, thankfully.  http://support.HP.com/us-en/document/c01175001

  In short, use Internet Explorer or Safari, go to the IP address of your network printer.  For Win XP users, you can determine the IP address using, start/printers and faxes /(select printer)/properties/ports tab / select new/Configure button/second field printer port to down the IP address shown.

  Once connected to the network printer subsystem, select the Networking tab.  The host name is the first field which can be changed. Enter a new name from 1 to 15 characters.  Tip: He doesn't like spaces. Underscores work well and the new name can be mixed case. Press the button apply at the bottom of the screen when done.  Warning appears that access to the printer may need to be changed if the IP address has been changed.  Acknowledge the warning. Printer goes offline for a few seconds. The page automatically refreshes and the new host name can be confirmed by inspection.

• 7612 HP all-in-One: software OfficeJet Pro 7612 interferes with the LaserJet P1505n

  Since the installation of the software for my new OfficeJet Pro7612 all-in-one, whenever I have print on my next LaserJet P1505n error message appears:

  

  Basic printing product despite the message. The expected state of the LaserJet messages do not seem to appear (for example, the message of the insert to envelopes paper) or double-sided printing instructions.  Manual double-sided printing seems to be unreliable. I uninstalled the 7612 and the problem disappeared. Reinstalled the basice 7612 drivers and he returned. All the solutions to this problem?

  Hey @Joe-TN,.

  @Sunshyn2005 is not in the office today, but I can certainly help you until Sunshyn2005 is back in the office on Monday.

  To clear your Laserjet queues:

  If the P1505n is connected to your printer using a USB cable, remove it.

  Close all other programs that you have open.

  In your search type in printers bar and open devices and printers.

  Right click on all the P1505 listed icons.

  Click on remove the instrument.

  Repeat for all the other icons of the printer listed.

  In your type of Services Research and open Component Services.

  On the left, click Services (Local).

  Right click on on the right print spooler.

  Click on stop.

  Open your drive C:\, then Windows, System 32, coil, and printers.

  Delete everything in this folder.

  Return to the Component Services window.

  Right-click on print spooler.

  Click Start.

  If you removed the USB cable, connect. If this is not the case, click on add printer and follow the prompts to add your queue.

  Please let me know the results after following the above. If you are able to print, click on accept solution. If you appreciate my help, please click on the thumbs up icon. The two icons are below this post.

• HP LaserJet P1505n, connected by Ethernet cable, all of a sudden cannot get an IP by DHCP.

  My HP LaserJet P1505n, connected by an Ethertnet to my LAN, has worked flawlessly for the past three years.  The last time that I shot it, he could not get an IP by DHCP.  I checked by printing a self-test page.  The IP address is 0.0.0.0.  I looked at the page self test three years ago and I saw that the IP address is 192.168.0.100.

  No recent changes have been made to my network.  I checked the Ethernet cable and connect to my router were very well by changing the Ethernet cable with a laptop.  The laptop worked with two cables and connections while the printer did not work with a configuration.

  Suggestions (not to mention that trying to deal with HP support - a catastrophe) would be greatly appreciated.

  Thank you very much for your timely response. This morning, the problem itself. I have a few computers on the network. The two I tried to print from, running WIN XP and the other running Ubuntu Linux. When any printed a test page, I checked the list of DHCP clients on my router Belkin (unknown model) and found that the printer was not present. It is while I printed the test page and found the IP 0.0.0.0. That was the case Saturday last until last night. This morning, I checked the list of DHCP clients again and the printer (miraculously?) appears in the list. I left the system all night and can't explain why she came back the printer works normally on computers and operating systems. To answer your other questions, all the lights on the printer and the router seemed to be turned on normally throughout this whole ordeal. On the printer, the green light was on and the amber light flashes occasionally. It is another mystery that me baffled. Finally, when I swapped the Ethernet cable, it's the printer not on the router. Who's going to change the port on the router. No configuration has been working on the printer; However, the two worked using my laptop. I was not looking for a hard reset as you suggest. I turned only the printer works without having cut the power. If the problem recurs, it will be the first thing to try. Thanks again for your response. If you have other thoughts, I'd love to hear them. My wife has managed to pick up a HP Deskjet 3050 to a market with no documentation. I'll try to install it on my system very soon. I may come back to this forum. Finally, I withdraw my comment about the HP support. I'm pleasantly surprised that an employee of HP replied.

• HP LaserJet P1505n necessary device drivers.

  Where can I find Windows Server 2008 drivers x 32 & x 64 for HP LaserJet P1505n peripheral? I find HP Driver Support and was unable to find drivers for this device.

  Hi mbaranowski,

  There is not a driver of HP for Server 2 k 8 (32-bit or 64-bit) that the product is released about 4 years ago.

  However, what I would like to try in this situation is either:

  (a) host Based pilot PnP for 2 k 3

  -Download the pilot PnP (http://h10025.www1.hp.com/ewfrf/wc/softwareDownloadIndex?softwareitem=bi-55240-6&cc=us&dlc=en&lc=en&os=1005&product=3435668&sw_lang=) based host to Server 2 k 3.

  -Use a program such as 7zip to extract the exe files.

  -Install the printer pointing to the .inf

  or,

  (b) attempt to install using the UPD (Universal Print Driver) - http://h20331.www2.hp.com/hpsub/cache/343033-0-0-225-121.html?jumpid=ex_r2845_go/upd

  Note: As indicated in the table below, the P1505 is not listed as supported a product... but it is worth trying.

  Hope this helps

• LaserJet 4000 TN: The printer HP Laserjet 4000 Series PCL5: error state & quot; message & quot;

  I sent the following message to Microsoft after a ' update:

  I have a printer HP Laserjet 4000 Series PCL5 TN which worked beautifully "black only" for many years. A recent update (Windows 10:12 / 22/15) seemed to put the printer in the "printer error state", when you try to print a simple document. It has been my default printer for a long time. I followed the suggestions of printer "windows 10", that is, unplug and plug - check cable (not USB) connections, remove the printer from the list of print devices /, reinstall drivers HP for Windows 10 (following suggestions from HP on HP site) - nothing seems to work. It has a network cable connection, but it is directly connected to my computer, no other computers are connected. See screen capture below. I even did a "recovery" of before 12/22! Any suggestions? Thank you. GM

  I received instructions from Microsoft:

  You run the printer Troubleshooter and identify the cause?

  If this isn't the case, we will do that by visiting the link below and see if it helps.

  http://Windows.Microsoft.com/en-us/Windows-10/fix-printer-problems

  Check also the update (KB number) has recently been installed on your computer.

  You can also restore printer drivers and check.

  To restore the driver, you can follow the steps below:

  • Press Windows + R on the desktop screen.
  • Type devmgmt.msc and press ENTER.
  • Expand the printer drivers and do a right-click on the driver and select Properties.
  • Go to the driver tab and click driver RollBack.

  Can I assume that you use a parallel cable to connect the printer to the computer.  If you do this is a known problem that can be solved.  Go to Device Manager and then click ports.  Double-click the lpt for the printer port, and then click on device settings at the top.  Change the default setting of the middle box checked in the box below to use any available interruption. I would also check the legacy down.  If necessary, turn the computer off and then turn it back on, but most of the time this solves the problem without a reboot.

• My printer HP LaserJet 1536dnf printer prints black pages after replacing the toner with a new one!

  I changed the toner cartridge for my printer HP LaserJet 1536dnf with a genuine HP toner cartridge and now it's printing the pages in black.  Any suggestions on how to fix this?

  Thank you!

  Hi @Beaglemom49779,.

  I see by your post that you have replaced the toner and now get all black pages. I can help you with this.

  Have you had the same problem with the printer before replacing the toner?

  It could be a hardware or with the printer fuser problem.

  If the problem started just after replacing the toner then most likely, the toner.

  Make sure that the printer is connected directly to a wall outlet. (do not use a hub or a surge protector)

  Number one cause of problems with toner.

  Check if the drum unit for damage:

  1. remove the cartridge of toner product and check that the tape has been removed.
  2. check the memory chip for damage.
  3 examine the surface of the imaging drum on the bottom of the toner cartridge.
  CAUTION: Do not touch the roller (Imaging drum) on the bottom of the cartridge.

  His fingerprints on the imaging drum can cause print quality problems.
  4. If you see the scratches, fingerprints, black on the drum, or any other damage on the imaging drum, replace toner.
  5. If the imaging drum does not appear to be damaged, rock the toner cartridge gently several times and reinstall it. Print a few pages to see if the problem is resolved.

  Please call our technical support if the there is a problem with the toner and you learn about a replacement, to the 800-474-6836. If you do not live in the United States / Canada region, please click the link below to get help from your region number. Contact HP.

  Good day!
  Thank you.

• My new HP laptop is running Windows 7. I want to add my printer HP LaserJet 4 L printer but can't seem to get the driver. Help!

  I was able to get the driver and the ut6ilize my HP Laser Jet 4 L printer.  Since my hard drive had to be replaced, I was not able to get the LaserJe6t from HP again 4L printer driver.  Help!

  With the help of a very knowledgeable Microsoft Tech, I was able to get the driver for my printer HP LaserJet 4 L printer.  It is listed on page 6 of 6 Iin the CATALOG.COM UPDATE from MICROSOFT.

  Hope this helps others, I know that this quest for the pilot was long and painful, but my trusty printer prints well!

  Good luck, Pat

• LaseJet M1530 MFP: Cannot install printer multifunction LaserJet M1530 on Windows 10 drivers

  I tried to install the downloaded driver software from http://support.hp.com/us-en/drivers/selfservice/HP-LaserJet-Pro-M1536-Multifunction-Printer-series/3... for my multifunction printer drivers LaserJet M1530 on my new windows 10 Pro o/s, but it has always failed with the message below. Restarted my laptop and I tried installing several times, are the same mistakes. Also, I installed the old drivers from the CD supplied with the printer, the same error as shown.

  The drivers is not compatible to Windows 10? Any suggestion to solve this problems?

  

  Hello @chrislim2888,

  It is a great place to get help! I read your post and see that you are unable to install the printer on the computer Windows 10. Thank you for providing all the information and the screenshot. I want to help you solve this problem.

  I have provided with steps to unlock the hidden administrator account and the installation of the printer on this account to see if this will help this situation.
   
  Note: Do not connect the USB cable until you are prompted during the installation.

  • Go to your Start menu and in the box "search programs and files", type CMD.
  • CMD will fill as an option to search above, just right-click on it and "run as Administrator".
  • Once opens in CMD (command prompt), type net user administrator / Active: Yes and press ENTER.
  • Then, close CMD and then restart your computer.
  • When your computer is on the newspaper in the new account which should show. It will be called Administrator and will not have a password on it.
  • If your computer automatically connects to your account after the restart then go to your Start menu and click on the arrow next to 'shutdown' and choose 'change user '. Now log on to the administrator account, that we have just released.
  • Under the administrator account, install the printer software.
  • Immediately after connecting the USB cable, follow the steps described in this paper: A Fatal Error displays during Installation of the software. This should resolve this error message.
  • Test the printer.
  • To disable the Admin account start at step 1 and type net user administrator / active: No..

  How is the printer connected?

  Please click the 'Thumbs Up' to thank me for my efforts! If this helps you resolve the problem you are experiencing, please click the "accept as Solution. Keep me posted. Good luck!

• printing with ultiboard 10.0 does not work with the printer hp laserjet 4

  I try to print my design ultiboard 10.0, but I get a blank page every time.

  It is a network HP LaserJet 4 Plus printer, an another printer HP LaserJet P3005 PCL 6 work perfect, but is not installed in my office.

  Word, Multisim etc.print without problem with the HP LaserJet 4 Plus.

  Change the DPI does not solve the problem.

  I found http://forums.ni.com/ni/board/message?board.id=370&message.id=1378&query.id=1278884#M1378

  But it doesn't give all the answers to the problem.

  Solved using the lj631du driver.

• Lost password - M401 of printer HP LaserJet Pro 400 series

  Hi all

  We have a years M401 of printer HP LaserJet Pro 400 series(touch screen model), a fo our former employee requested a password. Nobody knows this password and need to change the IP address of the printer.

  I'm looking to do a factory reset. What I found on the user guide, the procedure would be:

  Restore the default values set in the factory (touch panel)
  1. from the home screen on the product control panel, press the Setup button.
  2. highlight and press the Service menu.
  3. highlight and press the default button and then press the OK button.
  The product automatically restarts.

  The problem is that when I touch "service" menu, the password prompt prevents me from going to the next menu. Is there another way to do a factory reset on this printer? A button physics somewere? Something to do with the power button may be?

  Thank you very much for your help!

  Oliver

  I found how do:

  After a the NVRAM initialization, reconfigure all computers that print to this product so that the computer can recognize the product.

• Software all-in-one printer HP LaserJet Pro CM1415nfw does not load

  Software solution complete all-in-one printer HP LaserJet Pro CM1415nfw (CD or download) does not correctly load on my desktop running Windows 7 Professional 64 Bit. After I bypass payment the contract of the software, loading software hangs on the 70% mark and I get the following message:

  "Error message: a problem occurred during the preparation install the software." If please restart your computer and run this installer again. If the problem persists, please visit the web site of product support for your product. MSIExec command: /i "C\CM1410_MFP_Series Solution\Setup\Core\SIPM_64 based |" HpTcpMon64.msi"/qn REBOOT = ReallySuppress Path: return code: 1603"

  The CD software did load on my laptop which runs on Windows XP, SP - 3.3 and the printer works as expected.

  Uninstall other software printer and disconnect them. Then try to load the new software first.

• Driver printer HP LaserJet 4050 T problem

  I wonder if my cable is bad.  It is properly installed and connected correctly, but the computer and the printer are not communicating

  Printer drivers for the printer HP LaserJet 4050 T. says it is ready, but the jobs piling up and will not print. I was wondering if my cable is bad. It is properly installed and connected correctly, but the computer and the printer do not seem communicating__

  Try to uninstall/reinstall your printer.

  http://h20000.www2.HP.com/bizsupport/TechSupport/DriverDownload.jsp?lang=en&cc=us&prodNameId=18320&TaskID=135&prodTypeId=18972&prodSeriesId=25475&submit.y=4&submit.x=11&lang=en&cc=us

  The drivers are available at the link above.

  http://h20000.www2.HP.com/bizsupport/TechSupport/home.jsp?lang=en&cc=us&prodTypeId=18972&prodSeriesId=25475&submit.y=7&submit.x=6&lang=en&cc=us

  Go to the above link > 'See support and troubleshooting information' > key in your number of printer > there is the use of manuals there.

  For more information, contact HP:

  http://welcome.HP.com/country/us/en/contact_us.html

  See you soon.

  Mick Murphy - Microsoft partner

• Unable to print, Mavericks & LaserJet 1022

  I installed OS Mavericks & am now able to print with LaserJet 1022. Help! Is there a new driver

  to come? A person at HP can bring a solution, please

  Apple support has found the solution! Open "System Preferences", then «Printers & Scanners» Delete

  the HP LaserJet printer, press on the "-" key. Then reinstall it by pressing the button «+» Printing perfectly again!