Transfer of the unit

Similar Questions

• Bought B210a in the Portugal. Now to return to the United States. Problems?

  After four years of volunteering in the North of Portugal, where I bought my printer Photosmart Plus B210e (still in warranty) and my laptop HP Pavilion PC (out of warranty of six weeks), for reasons of ill health, I must return to the United States. [The printer that I had delivered statements did not survive the movers.]

  I have problems with my printer, or warranty with the purchase of ink cartridges?  I saw the messages of other people outside the United States, saying that their printers require different cartridges and more expensive - here, I use four 364, it is the same cartridge in the USA?

  HP/USA will accept a guarantee of common market HP/ESA (given that HP has all printers manufactured in China, there should be no problem, but...).

  Unfortunately, I live on a medical pension, which means that I don't want to buy expensive equipment that I already bought and paid for.

  Thank you very much - this is my first time on this forum.

  FCZ +.

  You can continue to use the cartridges in the printer and spare cartridges you have.  Once you miss if ink and the need to replace a cartridge you need to Contact HP to ask a "regionalization Reset." Do not charge for this, it is covered under the warranty of the cartridge. You will need to have access to your computer and printer then on line with HP. You will also need to have a set of cartridges for the new region, once completed reset cartridges of region of origin no longer works.  Webpage of HP on the subject is here.

  The cartridges in the United States will be 564.

  I don't know how the EU guarantee would transfer to the United States, you must Contact HP.

• MP3 player is not recognized by the computer, the unit will not charge and transfer of content said to connect the unit.

  Original tile: Mp3 player will not charge

  All of a sudden when I plug my MP3 into the usb port, the computer does not recognize the device.  It will not load and transfer of content said to connect the unit and it is already plugged.  The player will load on another computer.  The mouse that is connected works very well. Help!

  Hi LaurajmWR,

  Good to know that you are able to resolve the issue and thank you for sharing the information.

• Transfer directly to the mailbox of the user in the unit

  This was probably requested in the past...

  I have 4.1 CCM (3) and unity 4.0.4

  You know an easy way for the standard transfer a call to a voicemail access number (without the ring extension users).

  I tried to do it using a Manager to call the unit, but so far I've found a way.

  Fast ideas?

  Here are a few:

  http://www.Cisco.com/en/us/partner/products/SW/voicesw/ps2237/products_tech_note09186a008015b963.shtml

• Connection of the unit - transfer to AA

  I have a need to transfer busy / Annick callers to an extension to an auto attendant of the connection of the unit. Currently, the CCM has the value of the extension to transmit an AA extension on the server of connection of the unit, but when the call is forwarded, the standard greeting voicemail plays. If I answer the call and manually transfer the appellant in the Guide, everything works well.

  I tried setting upwards to pass rules routing, but without success. I confirmed that Call Manager is configured to send the number of "Redirect" as well as the call to the connection of the unit.

  Anyone has an idea on how to achieve this?

  Software:

  CallManager 4.1 (3)

  Unity connection 1.0000 SR1

  I'm a little confused... If you have a Subscriber with extension 1234 and 1234 is transferring a call you don't want the call to go to the wishes of the customer and to leave a message? Really?

  If you do not want that to happen so you can introduce that a routing call in transmission rule rule called upstairs who said if the call would transfer of 1234 and then forced to go to a call handler - this means that the Subscriber to post 1234 will never get people forwarding messages from his phone...

• File transfer using the PSG on a fedora 20 system

  Hello
   
  I have a Sansa clip + and am having a few problems with files transferrring on the device from a Linux box using the PSG.
   
  I'm running fedora 20 that automatically detects the device in MTP mode and it rises automatically.
  What I read, it uses gvfs-PSG to connect to the device and the camera settles on a location, as:
  /Run/user/1000/gvfs/mtp\:host\=%5Busb%3A001%2C009%5d
   
  I can see the files under internal memory/PSG in both file manager and command line.
   
  However, I have problems of transfer of files from my computer to the device.
  Using the file manager, it seems that I can copy MP3s from the computer to the device, but when I unplug the unit and look for the files copied to the device, that I can not find them.
  Re-connect the device to the computer files that I copied are visible on the device.
  Someone at - it an idea why I can't see the files copied to the device?
   
  What I read fedora 20 uses a tool called gvfs-PSG to connect through the PSG. Did someone knows something about this tool and how does fedora use?
  Anyone know how I can use it to transfer files to the device from the command line?
   
   
   
  ---------------------------------
   
  I also read on the various positions that libmtp can be used for the transfer of files through the PSG. However I cannot connect using this, I guess because the device is already connected using some fedora method uses when it is plugeed in.
  So I'm also trying to know a little more about what makes fedora when I plug a MTP device.
  What process/process it TI that connects car when the device is connected?
  What tool is used to mount the device when I plug?
  How can I (UN) mount the device manually?
  What is the difference between gvfs-PSG and libmtp? One other use?
   
  Anyone know anything about the PSG on fedora 20? Or where I can be able to know about it? I came in white so far.

  Why not use MSC in Windows and Linux? In my experience, PSG is enough glitchy in the two operating systems and there is really no advantage on MSC for most people.

• How can I email someone in the United Kingdom?

  I try to send 2 different people in England.  I've used my Windows mail mail yahoo.com and accounts hotmail.  I get no error message, but they do not receive my email.  The same thing happens when they try to send me e-mails.  No error but the emails are never received.  Once in a great all a simple test email will get thru.  It goes the same for MSN messenger, I can chat with these people, but when we try to send such files to the photo, the person I am trying to send the file to does not even see the transfer request.  I don't have a problem with sending emails to anyone located in the United States, however.  I spent weeks trying to find a solution, but nobody seems to know what is the cause.  WHY CAN'T I SEND EMAILS OR FILES OR BY E-MAIL IN THE UK?

  When you click on send, messages appear in the sent items folder?

  Clearly if the delivery does not happen when you use an online service like Yahoo or Live, it's a problem of delivery well outside your field of influence.  Your mail service provider will have to get involved.

  Brian Tillman [MVP-Outlook]

• Moving to the United States - my U2713HM will work?

  HI - moving from the United Kingdom to the United States. Monitor label seems to bear to 100v, so I guess that turning power is inside. Just buy a new power cord for the United States?

  Concerning

  That's right, P 5120part number. You must also transfer the serial number.

• Im trying to use easy transfer. missed the password when I put the files on the flash drive. How to find the password, now that I try to install the transfer?

  I'm putting my files on my new laptop to help facilitate the transfer.  My fiance ' put on a USB of my old laptop and did not notice the password when it did.  Now I can't get into my files because I do not know the password.  How can I get this password?  the old laptop is now to the pawnbroker, and I don't have access to it.

  Unfortunately, it is not only against Microsoft terms of use in order to help bypass passwords, it is also illegal in many countries, including the United States.  Self-help in breach or otherwise circumvent a password, you will have to search separately online.

  See also: the Strategy of Microsoft about lost or forgotten passwords

• THE UNIT TRANSMITS NO CALLER ID INFORMATION. DURING THE CALL MANAGEMENT

  WHEN THE UNIT IS SET TO ASK CALLER TO CALL TRANSFER SETTING FOR A SUBSCRIBER... IT DOES NOT TRANSMIT THE CALLER ID #, SIMPLY SAYS THE CALL IS FROM A VM #. IS THERE A WAY TO UNITY BEFORE THE CALLER SOURCE ID #?

  Thank you

  STEVE

  No, it does not support this.

• CCM4.0 HuntList and forward to the unit

  Hello

  I have a project with CCM4.0. The new list of hunting feature allows us to distribute calls within teams. If no one is available, we want to transfer it to the unit.

  Quick overview of the installation:

  -All users of Linegroup

  -Any voice message Linegroup B Port

  -Hunt the list with LG and LG B

  Everything works as expected. There is only a single annoying detail.

  When a call is transferred to the unit, she appears as a direct-dialed call = team number and number = voicemail port selected.

  As far as I know, I have to configure a routing rule for each team to make it work. It's fine for some teams, but I'm looking at several teams of hundreds...

  Is there a generic way to use the number called for the resolution of the mailbox?

  Is it a tool for bulk add routing rules?

  I think we will see more such questions with CCM4.0

  Thank you very much

  With unity 4.0 (3) or later version, you can add a routing rule unique Direct call, to manage it. Having the trigger of the rule on all calls and set the action to attempt forward. The unit will then attempt to match the number of the called party to a Subscriber or to call the Manager of. If no match is found, the call will move to the next rule and be processed normally. Let me know if this isn't what you're looking for.

  See you soon,.

  Eric

• On the composition of the unit

  The unit I am putting in place where a caller can dial 0 for the operator, but when I put in place there is transfer to the operator's voice mail. I use the entrance to the appellant, choosing the 0 key, calling them to send to the Subscriber, select post operator, Conversion: attempt to transfer to. I also tried similar parameter and chose a Directory Manager. Please first let me know if it is possible and what I could do wrong. The help is greatly apprecialed as always.

  I use unity 4.0 (4)

  Thank you

  Forehand Tim

  Yes, it is possible. Most likely the Subscriber that you choose to send the appellant didn't transfer enabled rule / configuration to dial a number. Check the transfer on the Subscriber page and make sure that it is set to ring their phone (by default, forwarding is off, and the call proceeds to the users wishes).

  I'm not sure you're asking about regarding the handler directory - the directory handler didn't transfer associated rules...

  You can find the book 'Audiotext Applications in unity' on the page www.CiscoUnityTools.com Documents be useful here - it covers the details of how call flow through the system, particualy with managers/subscribers - it might clarify some things for you.

• Recommended method to configure the unit to reject calls to himself

  What is the recommended / best for the configuration of the unit to refuse or remove calls to itself?

  A situation like a TRAP to call on a phone that has the value CFA VMail.

  Thank you

  Vance

  By default, the unit will try to match the incoming calls caller ID to post numbers that you entered for each port in UTIM. Unfortunately, only the caller ID is not reliable. For example, if the unit transfers a call through a trunk or line of JUNCTION and the call is transferred to the unit, we expect to see the port of transfer as caller ID incoming. In this case, we don't want to dismiss the appeal. To handle this, the unit will only reject calls that have caller ID corresponding to a dedicated outdial port (which is a port that is not configured to answer and therefore to transfer calls). So to take full advantage of this feature, you'll want to first configure the outbound ports dedicated for Notification calls, traps and MWI. Then you'll want to make sure that these ports have post numbers entered for them the UTIM. Details of this implementation can be found in CSCdu64641.

  Of course there are always cases where the method above is insufficient. For example, if a call from notification of the unit died in a cell phone that is passed to the caller ID unit original (extension of the unit) may not appear when the transmitted call. In order to take account of cases like this, a new tone-detect basic functionality has been added to 4.0 (4). See the setting "Reject sent Notification DTMF Tone" in the Advanced Settings tool. Unfortunately, this will help with the Notification calls only. Trap the calls that you mentioned won't be affected.

  Hope this helps,

  Eric

• Voicemail configuration base with CUCM and connections of the unit

  Hello again,

  I'm still very new to CUCM.  I am configuring a CUCMB 6.01 test deployment.  He has connections in the integrated unit.  I have 2 DNs assigned to users and Cisco IP phones.  I use MGCP (Cisco 3745 with 2FXO as gateway).  Now, I'm trying to extensions of voicemail installation for the users.  I read a lot of documentation on CUCM and unity, but I know that Unity Express is not what I need, and that you have not found information on the basics of implementing voicemail for users of CUCM.

  Users are DN 1001 and 1002 respectively.  They are part of a list of hunting (broadcast) so that the arrival of incoming calls, both phones will ring simultaneously.  Not sure if this has any bearing or not.  I would like to be able to put in place so that each DN rings on the IP phone say 6 times, then go to a Unity voicemail box configuration for that user.  I have already imported users 2 in the unit.  I ran the voice messaging port configuration wizard.  Everything looks as if it runs correctly, but I'm stuck really share say CUCM to route the call to the mailbox of the unit.  Probably the simplest part.  Ideas or help on this would be much appreciated.  Thank you in advance.

  Impetuous salvation,

  CUCM works this way

  So the fact that 1001 and 1002 receive calls via a group has a significant impact on this config.

  You must keep in mind that a call that is routed through the fighter pilot will always ignore the CFWD settings on phones of hunting member of the group. The normal way to control it then is through disconnection of the Group Hunt members phones combined with the front fighter pilot level settings.

  The following section describes how the parameters to call it forward on the phones of individual members Hunt are ignored when presented a call via the hunting feature. Here's a clip;

  Hunting and call forwarding

  The concept of hunting differs from call forwarding. Hunting allows Cisco Unified Communications Manager to extend a call to one or more lists of numbers, where each such list can specify an order of hunting which is selected from a fixed set of algorithms. When a call extends over a part of hunting of these lists and the party does not answer or is busy, hunting resumes from the next part of hunting. (The next party of hunting varies according to the current hunting algorithm). Hunting has so ignore settings call forward No Answer (CFNA), call forward busy (CFB) or call before all (CFA) for the party to attempt (group member line phones).

  Cisco Unified Communications Manager offers the possibility to redirect a call when hunting fails (that is, when the hunt ends without a part of hunting to the respondent, due either to exhaust the list of numbers of hunting is to expire). If used, this final redirection includes an automatic call forwarding action. Therefore, the fighter pilot Configuration window includes call forwarding configuration concepts which are similar to those found on the directory number Configuration window.

  Example of a call hunt

  Although hunting is different from the transfer, Hunt often develops as a call that gets forwarded to a certain number of fighter-pilot. The protective cover of appeal extends from hunting to allow the final drive after two exhausts of hunting or expires.

  A typical call calling hunting can include the following phases:

  The appeal of hunting through groupings of posts set up according to the algorithms implemented for each group. Hunting is successful (if it meets a hunting party), exhausts (if all parts of hunting are tempted, but no response), or expires (if the deadline set by the Maximum hunting timer runs out before that all parties are tempted, and none of the parties who have tried to answer).

  For the purpose of this example, we assume that hunting does not succeed.

  If a form any of the final drive is configured, the call forward for a next destination; otherwise, the call is released.

  Maximum hunting timer

  The Maximum Hunt Timer field on fighter pilot Configuration window allows the administrator to enter a value (in seconds) to limit the hunting through a list of hunting season. After gaps in the time specified, if hunting was not successful, the call is transferred to a voicemail system, a specific compound number, or some personal treatment (if configured) or the call is released.

  The good doc.

  http://www.Cisco.com/en/us/docs/voice_ip_comm/CUCM/Admin/6_0_1/ccmsys/a03rp.html#wp1078922

  If the call goes unanswered or all Member phones are disconnected, then an attacker needs to be applied at the level of the "fighter pilot".

  Hunt the settings forward

  Before hunting without an answer - when did not answered the call which is distributed through the list of hunting at a specific time, this field specifies how to transfer the call.

  Destination this parameter contains the number of the directory to which calls are forwarded.

  Before busy hunt - when the call which is distributed through the list of hunting is busy at a precise moment, this field specifies how to transfer the call.

  Destination this parameter contains the number of the directory to which calls are forwarded.

  Maximum Timer Hunt - enter a value (in seconds) that specifies the maximum duration for hunting. (Used in conjunction with Forward busy hunting)

  In your case, it is best to configure the DN of a fighter pilot in the extension of alternatives under the 1001 and 1002

  mailbox.

  I hope this helps!

  Rob

• The unit/AutoAttendant

  to open the greeting call handler, how entry road calling for expansion.

  Currently the UNIT can only route calling entry for the extension of the Subscriber greeting.

  ring the phone of the Subscriber not you create a call handler, it's alternative transfer of active game rule and set the chain transfer to ring the phone you want. Then in your opening call manager greeting, you can map a a key rule for ' attempt to transfer to "this call handler. You can also assign an extension number to the call handler and people he can dial directly from the opening greeting instead of (or in addition to) using a caller to key mapping entry.

  You can get more details on works the feature of auto attendant in the document "Audiotext applications in the unit" here:http://www.ciscounitytools.com/Documents.htm