Recommended method to configure the unit to reject calls to himself

Similar Questions

• What is the recommended method to shorten the strings for a given width

  I know how to detect the width required for a string using the font and size.

  I also know that the available width for the string

  If I detect that the width of the string is > available width what is better (or recommended) allows to shorten the chain?

  ex: 'It is my example text' is too long

  and 'it's maybe my examp... "fits exactly to the width that can be drawn from graphics

  is there an API for this, or should I reduce the length and try until his short enough?

  THX 4 info

  There is an API for just that - no need to mess with shortening of the chain yourself to all:

  Graphics.drawText(text, x, y, DrawStyle.ELLIPSIS, availableWidth)
  

• Windows 2008 Core - need a method to configure the grouping of cards NETWORK Broadcom

  Looking for a way to configure the integrated NICs on the broadcom NICs grouping of a PE1950III with Windows 2008 Core of Datacenter edition.

  BACS is a gui tool and will not run on a Windows 2008 Core installation.

  Any way to do it? Is there a command line utility? Documentation on configuration files (so they can be changed)?

  Thank you, Andre.

  
  

• THE UNIT TRANSMITS NO CALLER ID INFORMATION. DURING THE CALL MANAGEMENT

  WHEN THE UNIT IS SET TO ASK CALLER TO CALL TRANSFER SETTING FOR A SUBSCRIBER... IT DOES NOT TRANSMIT THE CALLER ID #, SIMPLY SAYS THE CALL IS FROM A VM #. IS THERE A WAY TO UNITY BEFORE THE CALLER SOURCE ID #?

  Thank you

  STEVE

  No, it does not support this.

• What is the recommended method to configure a web proxy to another server on the LAN?

  Hello

  I use Server to manage incoming web traffic, but also have another server running I want to use outside.

  I work in directly modifying the site configuration file and adding the ProxyPass and ProxyPassReverse directives but these overwritten when the site configuration is changed in the.app

  I want to implement this in a way that is not crushed and is more robust.

  Any advice would be very welcome.

  Thank you

  Gary

  I'm certainly not an expert in the field, but I think you can do what you're asking using the functionality of the Web application.

  You bring a plist to webapps folder and a conf file in the apache folder and then using.app, edit your Web site, and then click Change advanced settings and select the Web application that you created. It should not then be written more if you make any changes.

  The content of the conf file would proxy information in it:

  # of http://httpd.apache.org/docs/2.2/mod/mod_proxy.html#proxypass

  RewriteEngine on

  RewriteCond% {HTTPS} = off

  RewriteRule. -[E = Protocol: http, E = port: 8000]

  RewriteCond% {HTTPS} = we

  RewriteRule. -[E = Protocol: https, E = port: 8010]

  ProxyPassReverse / http://secondserver.example.com:8000 /

  ProxyPass / http://secondserver.example.com:8000 /

  and the plist would be something like this:

  <? XML version = "1.0" encoding = "UTF-8"? >

  <! DOCTYPE plist PUBLIC "-//Apple//DTD PLIST 1.0 / / IN" "http://www.apple.com/DTDs/PropertyList-1.0.dtd" > ""

  <!-see the manual pages for webapp.plist (5) and webappctl (8) for more information on this example webapp.plist->

  < plist version = "1.0" >

  < dict >

  includeFiles < key > < / key >

  < table > <! - include files are enabled in the virtual host then webapp - >

  < string > /Library/Server/Web/Config/apache2/httpd_yourwebapp.conf < / string > <! - name must match your conf file - >

  < / array >

  < key > name < / key >

  < string > com.example.secondserverwebapp < / string >

  displayName < key > < / key > <! - name displayed in app server - >

  < string > SecondServerWebApp < / string >

  installationIndicatorFilePath < key > < / key > <!-the presence of this file indicates web app is installed->

  < string > /Library/Server/Web/Config/apache2/httpd_yourwebapp.conf < / string >

  sslPolicy < key > < / key > <! - determines the behavior of the webapp SSL - >

  < number > 0 Integer < / integer > <!--0: by default, UseSSLWhenEnabled->

  <!--1: UseSSLAlways->

  <!--2: UseSSLOnlyWhenCertificateIsTrustable->

  <!--3: UseSSLNever->

  <!--4: UseSSLAndNonSSL->

  < / dict >

  < / plist >

  This is perhaps not completely right, but can direct you in the right direction, I hope that someone with more knowledge will be the chip in the meantime

• Can someone tell me what the recommendation of Oracle is on how to best configure the load balancer?

  We are currently using the "configuration.properties" file to identify load balancing our servers, but we are curious to see if it is the recommended method to configure load balancing, or if there is a better way.

  I opened a case with Oracle support and asked the same questions - entry configuration.properties of the file servers is the only supported method used by Peoplesoft to balancing upward through 8.54.

  See also: how the Installer Application Server Load balancing and failover (Doc ID 1252846.1)

• What is the recommended method to organize your applications on 6 s more?

  What is the recommended method to arrange the icons on the iPhone

  Hello

  Simply move you them where you want on the screen of each apps

  Are in different places on the move of the screen by holding down until what they shake.

  See you soon

  Brian

• Connection of the UNIT with CUCM integration

  Hello

  Can someone please advice me on the underside, I CUCM (PUB + 1 SUB) cluster and node stand-alone 1 CUC.

  need to know the best Cisco recommended configuration

  1.0 order of AXL servers (what should we put 0 - PUB or SUB)

  2.0 tftp and order serever CUCM under port, (PUB, order SUB) group settings

  Please advice

  Thank you

  Purna

  Axl Server always be PUB and SUB.
  Pub - 0
  Sub - 1

  TFTP server must first be Sub and PUB.

  Sub - 0
  Pub - 1

  This is the best way and the recommended method to configure / integration with CUCM with connecting the unit

  Sent by Cisco Support technique iPhone App

• Exchange 2003 FrontEnd Server Down, Bank of messages of the unit down.

  Hello

  The configuration of the Exchange 2003 environment with 1 Server frontend and backend (cluster) 2 servers. The Exchange FrontEnd server is down due to the problem of relay service. All outlook and exchange related services clients are point directly to the server main exchange. This cause of unity is unable to store voice messages in the exchange store. When subscribers call for unity, system will tell the Bank to the user messages are temporary offline. How re - configure the unit to make it appear the message store? Below is the version of the unit.

  Cisco Unity Version 4.0

  Build number 4.0 (3) SR 1

  Windows Server Version Microsoft Windows 2000 version 2195 (Service Pack 3)

  Pls advise.

  Thanking in advance for your help.

  The guide of reconfiguration:

  http://www.Cisco.com/en/us/products/SW/voicesw/ps2237/products_upgrade_guides_chapter09186a0080205a7f.html

  Thank you

  Keith

• reject call with sms does not

  Hello

  Since I upgraded my 6603 lollipop I can't reject calls with SMS messages more.

  Because when I got a call (and the phone is locked) drag up the button to select the message of rejection on the bottom of the screen is layered with black bar soft key showing the home and back buttons.

  Is this a bug or am I missing a setting?

  Thanks in advance!

  Hello

  I've seen this before. You have installed the application Smart Key? If so, I suggest you uninstall this application if you want the ability to reject calls with a text message.

• VI test a string control configured to view password, it displays 'normal view' mode in the Unit Test Framework lvtest Properties dialog box

  Configuration of the password does not lvtest UTF Properties dialog window. It's probably a bug.

  Hey jorgeinSD,

  The Unit Test is designed to test the input values and compare them with a desired output value to make sure that your VI works under different entries. For this reason, it is necessary that the user makes tests see the entry and not just values «*» Your VI should not change (as in the VI should still display mode password, ' * '), but the properties of Unit Test should display the actual value and not mode password. Is that what you mean by 'configuration of the password does not UTF' or did, I misunderstood the question? I hope this helps!

  -Nathan H

• The Acer W510 Tablet purchased in the United States, can be configured to operate in Spanish

  Hello friends

  I want to buy in the United States, the W510 Acer Tablet, but I wonder if it is possible to configure it so that it works in Spanish

  Thank you very much for your help

  Sure it possible - to ask the Microsoft Store ( http://www.microsoftstore.com/store/msstore/pd/Acer-Iconia-W510-1674-Tablet/productID.258447300/vip... )

• Voicemail configuration base with CUCM and connections of the unit

  Hello again,

  I'm still very new to CUCM.  I am configuring a CUCMB 6.01 test deployment.  He has connections in the integrated unit.  I have 2 DNs assigned to users and Cisco IP phones.  I use MGCP (Cisco 3745 with 2FXO as gateway).  Now, I'm trying to extensions of voicemail installation for the users.  I read a lot of documentation on CUCM and unity, but I know that Unity Express is not what I need, and that you have not found information on the basics of implementing voicemail for users of CUCM.

  Users are DN 1001 and 1002 respectively.  They are part of a list of hunting (broadcast) so that the arrival of incoming calls, both phones will ring simultaneously.  Not sure if this has any bearing or not.  I would like to be able to put in place so that each DN rings on the IP phone say 6 times, then go to a Unity voicemail box configuration for that user.  I have already imported users 2 in the unit.  I ran the voice messaging port configuration wizard.  Everything looks as if it runs correctly, but I'm stuck really share say CUCM to route the call to the mailbox of the unit.  Probably the simplest part.  Ideas or help on this would be much appreciated.  Thank you in advance.

  Impetuous salvation,

  CUCM works this way

  So the fact that 1001 and 1002 receive calls via a group has a significant impact on this config.

  You must keep in mind that a call that is routed through the fighter pilot will always ignore the CFWD settings on phones of hunting member of the group. The normal way to control it then is through disconnection of the Group Hunt members phones combined with the front fighter pilot level settings.

  The following section describes how the parameters to call it forward on the phones of individual members Hunt are ignored when presented a call via the hunting feature. Here's a clip;

  Hunting and call forwarding

  The concept of hunting differs from call forwarding. Hunting allows Cisco Unified Communications Manager to extend a call to one or more lists of numbers, where each such list can specify an order of hunting which is selected from a fixed set of algorithms. When a call extends over a part of hunting of these lists and the party does not answer or is busy, hunting resumes from the next part of hunting. (The next party of hunting varies according to the current hunting algorithm). Hunting has so ignore settings call forward No Answer (CFNA), call forward busy (CFB) or call before all (CFA) for the party to attempt (group member line phones).

  Cisco Unified Communications Manager offers the possibility to redirect a call when hunting fails (that is, when the hunt ends without a part of hunting to the respondent, due either to exhaust the list of numbers of hunting is to expire). If used, this final redirection includes an automatic call forwarding action. Therefore, the fighter pilot Configuration window includes call forwarding configuration concepts which are similar to those found on the directory number Configuration window.

  Example of a call hunt

  Although hunting is different from the transfer, Hunt often develops as a call that gets forwarded to a certain number of fighter-pilot. The protective cover of appeal extends from hunting to allow the final drive after two exhausts of hunting or expires.

  A typical call calling hunting can include the following phases:

  The appeal of hunting through groupings of posts set up according to the algorithms implemented for each group. Hunting is successful (if it meets a hunting party), exhausts (if all parts of hunting are tempted, but no response), or expires (if the deadline set by the Maximum hunting timer runs out before that all parties are tempted, and none of the parties who have tried to answer).

  For the purpose of this example, we assume that hunting does not succeed.

  If a form any of the final drive is configured, the call forward for a next destination; otherwise, the call is released.

  Maximum hunting timer

  The Maximum Hunt Timer field on fighter pilot Configuration window allows the administrator to enter a value (in seconds) to limit the hunting through a list of hunting season. After gaps in the time specified, if hunting was not successful, the call is transferred to a voicemail system, a specific compound number, or some personal treatment (if configured) or the call is released.

  The good doc.

  http://www.Cisco.com/en/us/docs/voice_ip_comm/CUCM/Admin/6_0_1/ccmsys/a03rp.html#wp1078922

  If the call goes unanswered or all Member phones are disconnected, then an attacker needs to be applied at the level of the "fighter pilot".

  Hunt the settings forward

  Before hunting without an answer - when did not answered the call which is distributed through the list of hunting at a specific time, this field specifies how to transfer the call.

  Destination this parameter contains the number of the directory to which calls are forwarded.

  Before busy hunt - when the call which is distributed through the list of hunting is busy at a precise moment, this field specifies how to transfer the call.

  Destination this parameter contains the number of the directory to which calls are forwarded.

  Maximum Timer Hunt - enter a value (in seconds) that specifies the maximum duration for hunting. (Used in conjunction with Forward busy hunting)

  In your case, it is best to configure the DN of a fighter pilot in the extension of alternatives under the 1001 and 1002

  mailbox.

  I hope this helps!

  Rob

• Help the unit connection voicemail in email configuration

  Hi all

  I recently did a 4.2 unit migration of Unit 8 connection that went well with the help of some of these people in the forum. As there is always something. Now, I'm running the questions fall my voicemail email accounts.

  As I understand the connection unit will deliver voice messages in two modes:

  1. via IMAP Inbox separately on the users email client.

  2 store on the front, via relay about the unit settings.

  I'm trying the second option. I have configured on the face of the unit connection, the appropriate SMTP domain (example, myname.org) and the name of the smart host (mail.myname.org)

  Tested and I am not recieveing messages in Mail. Is there anything I need to look at the Exchange or the side users of the connection manager or call the unit that I'm missing?

  Thank you

  Dan

  On the server connection to the unit, you don't want the SMTP domain to be the same as the domain of corporate email.  By default, connection of the unit will implement its own SMTP domain... com (for example, hailey.lab.com).  It is not a good idea to set up the domain SMTP overlap with an existing domain.

  To SMTP relay, you must make sure that your host relay (mail.myname.org) is configured to provide relay services and also accepts the relay from the server of connection of the unit.

  For the configuration of the relay, read this blog: http://www.netcraftsmen.net/component/content/article/70-unified-communications/695-voicemail-only-voicemail-relay-and-integrated-messaging-options-with-unity-connection.html

  Finally, if you use the unit connection 8.5 you may exploit the unique Inbox feature which is Unified Messaging (i.e., voice message appears in the Inbox e-mail from Exchange users).

  Hailey

  Please note the useful messages!

• How to configure an application automatically starts when the unit is turned on

  I used the instructions in:

  How to-configure an application automatically starts when the unit is turned on

  Article number: DB-00002

  1. - in the BlackBerry JDE, right click on the project and select Properties.
  2. - in the Application tab, check the function of automatic execution on startup checkbox.
  3. - If you want your application to run in the background and not appear on the Ribbon, select the Module system.

  My application starts automatically in debugging, but not in my BB8100 pearl.

  Any ideas? THX...

  If you are looking for in the unit LOG immediately after startup, you should find out the reason.  I suggest to you that what follows is the most likely reasons:

  (a) application not signed

  (b) developed for a different level than the device OS.