transfer to SD card

Similar Questions

• Can no long use transfer to SD card with the new firmware update 23.0.1.A.3.12

  I just received the last update for my Z2. My camera now has a 23.0.1.A.3.12 firmware.

  I encountered a problem. Can I transfer is more pictures on SD card through transfer to SD card as storage.

  I would like to consider making a repair of the system as this will often fix problems after an upgrade – it will be factory reset your phone

  Turn off your phone and unplug the PC (Hold to increase the volume and power for 10 seconds)
  Start PC Companion and select the area of support then updated my phone/Tablet then blue fix my phone/Tablet and follow the instructions on the screen - when you are prompted, always connect your phone off press and hold volume or back button - this should begin the process of repair or reformatting

  If you use Windows 8/8.1 or a 64-bit operating system and then adjust the settings for PC Companion and run in compatibility mode and choose Windows 7 or XP

• HP Chromebook 14 14-q050ca: transferer transfer pictures via card reader, says DCIM needs another application of the store, which one?

  I tried to transfer my photos, I use a card reader and I get a folder DCIM (folder), and then he said: it does not go to the apps store! But that either the app use?

  paul701 wrote:

  Hi banheim,

  I can't download the Explorer, I use a Chromebook 14 14-q050ca with the windows xp operating system, so I ask you again once what app can I download online store!

  Thank you

  PS getting very frustrated!

  Why you go web store, when you use XP? To do this, you contact or visit the camera support site to see what you need to do or install.

• Transfer photos to card SD-now no Gallery

  I transferred my pictures from internal to the SD, now I can't see them in the gallery. How can I move it to the SD card and still be able to see them in the Gallery?

  Thank you

  Heather

  Try the settings > apps > all > Gallery > clear Cache

• MP3s that I transfer to microsd card get renamed to letters JAP!

  Hey all the...

  Not sure if this has been considered at all, but if someone knows how to solve this problem, I can't tell you how much Id greatly appreciate it!

  I have a Sansa e280 8 GB player, with an additional 8 GB microsd card installed. Ive had for a few months now, and it is a v2 and fully update firmware. So far, I only used the microsd storage for my videos and my pictures (who all play perfectly). After having started to flow along the space on my drive (less than 200 MB), I thought that its time to start to put music on the card as well.

  I xfer had a bunch of mp3s, but when the player refreshes and I go, nothing is transferred correctly. Almost all tracks appear as "Unknown" and each of them get renamed to Japanese/Chinese/that it's character. I thought WTF?

  I tried several times, and it always happens. This was never the case when the real player music. I use MTP mode and its always been very well, it happens that by putting MP3s on the microsd card. But as said, the video and photos put on it still play perfectly.

  For the love of God, anyone may know why this happens and how to stop it?

  Thank you in advance!

  ~~**~~

  Well, I'm happy to report that the problem, thanks entirely to Mp3Tag, apparently has been resolved!

  Previously, I had been using Winamp to listen to and tag my mp3. I tried Mp3tag and removed the tags id3v1 and renamed using the iso id3v2.3 tags. When transferred to my microsd card, they now appear correctly! Assumed that you were right and that it was a question of label, even if I must say using my method of Winamp, they always correctly transferred to the real player and never came all poorly labeled like that.

   

  I use a 8 GB Sandisk card if that makes a difference at all... Im just happy that I can now use capacity memory microsd card for anything other than photos/videos. Thank you for recommending this program!

   

  **~~**

• Smartphones from blackBerry a transfer contacts sim card to the phone?

  Hi all, I have an old SIM contacts on this issue how would synchronize these contacts on the phone, so I did not hasve to spend hours typing all contacts

  Unfortunately, it's just how it works. SIM cards have a much less robust AddressBook that does the BB; they store an entry to a phone number. As such, when they are imported into a more robust address book (as BB), you end up with this result. The only thing to do is to get in a PIM on PC (for example, Outlook) and make handling it, then re - sync back to the BB and it's going to be clean again.

  See you soon!

• transfer of data to the sd card does not start

  Hi all
  In the storage of settings on my Xperia Z2 section, there is an option "transfer of data to the sd card. It allows to work very well. Once the internal memory was terribly full, is come to a notification that says "75% full, data transfer to sd card" tried as always but this time it does not start. When I try to run within the parameters, also does not start.
  Any suggestions are appreciated.
  Thank you

  Use the file Commander app > cut > paste > on the SD card.

• BlackBerry smartphones file transfer from device to media card

  Is there a way I can transfer all of the apps (downloaded on appworld) of my camera on my press card? I have already activated the card holder, but there is no other choice to transfer.
  And also, can I put my default media card and save all future downloads of appworld? If its possible, how can I do that?

  Pls help. Thank you!

  Hi yhayen03

  Reason why you want to transfer your press card applications, these applications must be installed on our memory in order to run on our BlackBerry. However, you can transfer your media files from your device to media card .to menory help refer this KB:

  KB05478 : , transfer files between the card and device memory on a BlackBerry smartphone  

   

• Transfer of contact

  My father has a new 6 iPhone more and I transferred her liked and signed in his apple SIM card ID. When I did this, it reproduces all the contacts of the family in his phone. We had this problem with the contacts and whenever I see a new contact and I delete it, then he disappears from the phone of my mom. If anyone was wondering, we are all in a family group to iCloud. I just need to know how we can stop the transfer on contacts to another phone of the family we don't want to. See you soon

  Well, transfer the SIM card had nothing to do with the contacts. The iPhone does not record anything on the SIM card. If you use the same Apple ID to iCloud, then turn on the contacts will sync them on all devices. This synchronization means that whenever you add or delete a contact on devices, it will be the same on all devices. The only way around this is to use an identifier separate Apple for iCloud on all devices. It will take more work to separate the contacts first, but using separate identifiers prevents contacts on all phones.

• Card data scope of device to the TDMS file buffer

  How transfer brought data card device buffer to TDMS file directly bye passing buffers LabVIEW and Windows. In the same way as DAQmx configure logging (VI) do we have any function scope?

  The API OR-SCOPE doesn't have the ability to record data acquired directly on the disc like the DAQmx API offers.  All data must be retrieved from the on-board memory, which makes data transfer OR-SCOPE kernel driver via DMA, and a copy must then happen to transfer data from the space of the kernel in user space (LabVIEW), how it can be manipulated.

  The main reason for this flow is because the calibration scale occurs in the NOR-SCOPE driver and not the material.  So if you were to save data directly to the disk as DAQmx, he stock raw ADC codes, without correction calibrated.  The API OR-SCOPE allows to recover the coefficients of scale if you want to apply them at a later date after extraction of the data from the hardware.  To optimize flow of data applications, it is recommended.

  The only exception to the logging directly on the disk would be the Oscilloscope Reconfigurable SMU-5171R.  It is being implemented with LabVIEW FPGA firmware using the design of Instrument libraries, code is open for editing.  With the open nature of this software stack, it is possible to implement "direct to TDMS" functionality with LabVIEW FPGA Read region node.

  I hope this helps!

  -Nathan

• Problem with setting window of acquisition on 1429 PCIe capture card

  Hi all

  Recently, I am using the Basler A504k camera with card PCIe-1429 of goodwill for the acquisition of images at high speed. I found problems with setting the acquisition window in the capture card using Measurement & Automation Explorer.

  1. for example, if the size of the original image is 1280 * 500, if I put the window of acquisition with left 0 and width 1280, everything is OK, but if I set the width to 1279, there will be an error (error 0xBFF6002C FIFO overflow caused the acquisition of stop), if I set the width multiple of 8, there was no error. Could someone tell me why in this case, is it because the packet data transfer for acquisition card rule?

  2. the window of acquisition is set according to the camera image, right? If the camera has also a function of area of interest, the acquisition window setting is always the image coming from the camera.

  Attachment is my setting a MAX software.

  Thank you very much

  Hi xiaochunfly,

  My bet is 1280 pixels image size is aligned on 32 bytes, and the material may actually go from line to line without breaking the transfers. With the width of the non-aligned countries, he needs to start a new transfer on each line, and this has an additional load on the PCIe bus and the system memory bus. Currently infrastructure IMAQ trying to adjust to any size of border/size possible image regardless of efficiency, it take the material and changes in recent processor Intel chipsets have reduced effectiveness with system memory bus performs under these conditions. So, you can get much better performance if you use line widths. You can also get the latest IMAQ driver because there was changes in the latest few transfer more effective under some of these conditions.

  AOI is usually under the framegrabber. If you reduce the AOI who sends the camera, it seems often identical to the framegrabber as if you just had a camera with a smaller sensor. Thus, your AOI in IMAQ must be set to the size of that the camera is sending, unless for some reason you want to capture less of what the camera is able to set up on its own.

  Eric

• Transfer of map data files NI PXI Scope of the buffer for the device to TDMS

  How transfer brought data card device buffer to TDMS file directly bye passing buffers LabVIEW and Windows.

  In the same way as DAQmx configure logging (VI) do we have any function scope?

  More appropriate forum http://forums.ni.com/t5/High-Speed-Digitizers/bd-p/150

• best way to transfer of Z1 to Z5?

  When I moved from x 10 S, then S for Z1 I went the slow lane of loging into the new phone using my old details of gmail and install virtually all applications and fees to music (and with 10 GB of music, he reselection of the pc on mediago library and transfer to sd card takes hours!)

  This time I'm hoping to use either "nfc" or "pc companion" to do as much as possible this time...

  What is the best way?

  I have a U1 C10 64 gb sd speed in my Z1 and I have a new U3 C10 64 gb sd ready to put in the Z5

  What transfers?   e-mail gmail settings?   assigned notification sounds?  all of my music in the SD card to new SD card phones?

  My all the apps take themselves or do I go in reselct and google them from the tab set 'all '.

  can I when the "new sim card" is not yet activated and the old phones sim is still active or when the Z1 sim is dead and the Z5 SIM is active (as EE always deliver new sims, even when the shape is the same, which is not this time is it?)

  and can I connect on the new phone with my gmail account used on the Z1 before you begin, then?

  Just use transfer Xperia or Pc companion http://www.sonymobile.com/global-en/apps-services/xperia-transfer/transfer-from-android-smartphone-o...

• Savings & move to the SD card - problems

  Hi everyone, hoping you can help me on this one.

  Now I realize is not a topic not discussed, but I'm fairly warned about such things, and this have me puzzled and led to asking me for help!

  My M4 told me 'storage insuffucent' to download. I get and implement everything went to the SD card.

  ... and yet my internal storage always shows 3.2 GB of Apps. Looking at the list and size of the apps, I'd be surprised if they totaled 1 GB... it's strange in itself... In addition these "3.2 GB" of applications do not appear as candidates in the menu 'transfer from SD card '.

  That leaves me about 600 MB of data (100 MB well in fact because I think you need a security of 500 MB allows Play store download or update with the new "not enough memeory" saying.) All of which means other app downloads will have to happen one at a time and then immediately went to the sd Card... and more updates fail.

  This is the background... and my questions are the following:

  1) someone (please!) has found a way to get the Google game to download directly on SD card, thus eliminating my question? (much discussed I know, but no solution to what I could find)

  (2) why can I not move more apps SD card...? I'm talking about the non-system those who will not give the ability to move.

  (3) my feeling is that I would need to do something I'd rather not do it to get the results I need... that is root of the device, please tell me I'm wrong someone?... anyone!

  Thanks in advance!

  @KarlASC

  Hello and welcome in the community. First advice I can give you is to try to erase some files cached, you can easily do this in settings-> Storage-> Tap on the cached files and accept the confirmation pop-up. This can free up a huge chunk of space that expands by using applications.

  To answer your questions:

  (1) so there is no way to install directly on SD card, but Google has promised improvements in Marshmallow which will alow users to convert their SD cards to the emulated internal memory.

  (2) this limitation made by Google and affect all Android phones out there.

  Rooting 3) allows you to mess with system files, but to move an app to SD card it does not guarantee that it will still function as it is supposed to do. I strongly recommend that you not root your device if you are not an expert in the workings of the Android operating system.

• SD card prob

  so far, I have not had any problems with the transfer of sd card to comp photos.
  a pop up asked me if you want to import, view, etc. which is on the map. but now nothing.
  that through the gallery photo and no control on what should be rejected and what to import.
  answers please.
  Norm .h norm.h

  Hello

  Start - Programs by default - Change AutoPlay settings - set photos ask me every time or as
  you want to - SAVE

  I hope this helps. Rob - bicycle - Mark Twain said it is good.